RPM80702, RPM Traxxas Slash 4x4 Front or Rear A-arms (Black) RPM A-arms for the Traxxas Slash 4x4 are everything you’ve come to expect from RPM and more! Features: They eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, they cut 6.5 grams of weight off of each A-arm! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions! We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over the RPM traditional look with our 30 degree leading and trailing edges, and huge bosses for the shock and sway bar mounts. Additionally, you now have the option of a bit of color with either blue or black to choose from. RPM A-arms are molded in RPM trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA! This product was added to our catalog on March 2, 2021

Read more less

RPM81465, RPM E-Revo 2.0 Front Right Suspension Arm Set (Blue) This is the RPM E-Revo 2.0 Front Right Suspension Arm Set, including the front right upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams! RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks! RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage. Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole. This product was added to our catalog on March 16, 2021

Read more less

RPM81515, RPM E-Revo 2.0 Front Left Suspension Arm Set (Blue) This is the RPM E-Revo 2.0 Front Left Suspension Arm Set, including the front left upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams! RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks. RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage. Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.  This product was added to our catalog on April 6, 2021

Read more less

RPM80662, RPM Traxxas X-Maxx Oversized Front Axle Carriers w/Bearings (2) RPM Traxxas X-Maxx Oversized Front Axle Carriers feature increased durability and larger inner bearings. Stock bearings are a mere 20x27x4mm while the oversized bearings RPM uses are gigantic a 20x32x7mm. This delivers a load rating that is nearly 300% higher than the stock bearings while the static load rating is over 300% higher. That’s triple the strength of the stock inner bearings. Features: Replaces stock Traxxas TRA7737 Includes gigantic 20x32x7mm inner bearings Massive steering support ribs for the strongest possible carriers Outer bearings not included (Stock bearings are used) Sold in pairs (1 Left/1 Right) This product was added to our catalog on May 18, 2021

Read more less

RPM81512, RPM E-Revo 2.0 Front Left Suspension Arm Set (Black) This is the RPM E-Revo 2.0 Front Left Suspension Arm Set, including the front left upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams! RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks. RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage. Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.  This product was added to our catalog on February 6, 2021

Read more less

RPM70652, RPM Slash LCG 4x4 & Rally Nerf Bar Set (Black) This is an optional RPM Slash LCG 4x4 & Rally Nerf Bar Set. The chassis layouts of the 1/10th scale Rally LCG & Slash 4x4 LCG changed the original design of the stock nerf bars, making the RPM80622 & RPM80625 nerf bars unusable. These LCG nerf bars fix that problem and are a direct, perfect fit! RPM LCG Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to Black Nerf Bars for the 1/10th Rally, LCG Slash 2wd & LCG Slash 4x4. The additional cross bracing optimizes the rigidity while absorbing additional impact energy anything less than RPM would have crumpled under! RPM Nerf Bars are stock replacement parts and work with all stock Traxxas chassis nerf bars TRA7423. RPM Nerf Bars are proudly made in the USA, molded in either blue or black from our engineering grade nylons and backed by our limited lifetime warranty against breakage. Features:  Available in Black and Blue This product was added to our catalog on July 31, 2021

Read more less

RPM70812, RPM Traxxas Rustler Rear Bumper (Black)This product was added to our catalog on December 16, 2021

Read more less