TRA1844, Traxxas Large Servo Saver
This is a large servo saver from Traxxas. This servo saver mounts to the servo, and provides protection for your steering servo by allowing flex in the steering linkage during a crash.
This product was added to our catalog on September 7, 2021
TRA6854A, Traxxas Rustler 4X4 Front Outer Extreme Heavy Duty Stub Axle Assembly
Traxxas Rustler 4X4 Front Outer Extreme Heavy Duty Stub Axle Assembly. This is the factory assembled, replacement stub axle assembly that is installed in the front outer position, on either the right or left side of the chassis. Package includes one extreme heavy duty stub axle assembly.
This product was added to our catalog on April 31, 2021
AR390178, Arrma 1/8 Body Clips w/Rubber Retainers (Black) (4)
These high quality body clip retainers tether your body clips to your bodyshell. This means that you do not lose your clips when they become detached from the body post during a roll-over when running your vehicle, meaning no more lost clips when you have removed your bodyshell.
Features:
Produced from strong, flexible rubber to provide durability
Specially designed bodyshell grommet attaches retainer to hole in bodyshell
Large pull tab allows quick and easy body clip removal even with wet or cold hands
ARRMA branded
Supplied with large size body clips
Includes:
(4) ARRMA Body Clip Retainers
(4) Large size Body Clips
(1) Fitting Instructions
This product was added to our catalog on May 25, 2021
TRA1548, Traxxas Set Screw Set (12)
This is a replacement Traxxas Set Screw Set, and is intended for use with the Traxxas Blast. This set includes eight 3x4mm set screws, and four 4x4mm Stainless Steel set screws.
This product was added to our catalog on May 7, 2021
TRA1951R, Traxxas Heavy Duty Steel CV Rear Driveshaft (2)
This is a pack of two Traxxas Heavy Duty Steel CV Rear Driveshafts. Traxxas Steel Constant Velocity Shafts deliver the ultimate in torque handling and efficient power transfer with gleaming nickel-plated shafts, combined with black silicone boots that add a custom look with improved durability. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are captured so there is less worry about losing a pin.
This product was added to our catalog on April 13, 20213
SAVSH0263MGP, Savox SH-0263MGP Micro Metal Gear Digital Servo
The Savox SH-0263MGP Metal Gear Digital Micro Servo is quick and built tough. It's small size and superb overall performance makes this servo ideal for applications such as 450 size helicopters.
NOTE: "Plus" models feature Soft Start and Sanwa SSR Compatibility
Features:
Metal gear train ensures durability and longevity.
Aluminum middle case allows for cooler operating temperatures.
Ideal for small planes, and 450 size helicopters.
Dual ball bearing support.
Specifications:
Torque:
@4.8v: 1.8kg/25.0oz-in
@6.0v: 2.2kg/30.6oz-in
Speed:
@4.8v: 0.13 sec/60 deg
@6.0v: 0.10 sec/60 deg
Dimensions (LxWxH) 22.8 x 12.0 x 25.4mm
Weight: 15.0g
Includes:
(1) SH-0263MGP Micro Metal Gear Digital Servo
Plastic Servo Arms and Hardware
This product was added to our catalog on March 23, 2023
YEA-LK-0001WT, Yeah Racing Ultra Bright LED Light Kit w/Light Holders
The Yeah Racing Ultra Bright LED Light Kit is a great light kit for any application. These lights feature four white 5mm LEDs, and two red 5mm LEDs, all wired into a single female JST connector. The lights run at a maximum of 6.0V, so they can be powered directly from your receiver, or from a 4 or 5 cell nickel battery.
Package includes light string and two adapters. One adapter features a JR style plug that plugs into the receiver, a male JST that plugs into the light string, and a female JST plug that can be plugged directly into a separate battery. The other adapter features a female JR into a male JST so you can bypass the receiver and power the lights directly from a battery pack.
This product was added to our catalog on December 16, 2021
TRA6853A, Traxxas Rustler 4X4 Rear Outer Extreme Heavy Duty Stub Axle Assembly
Traxxas Rustler 4X4 Rear Outer Extreme Heavy Duty Stub Axle Assembly. This is the factory assembled, replacement stub axle assembly that is installed in the rear outer position, on either the right or left side of the chassis. Package includes one extreme heavy duty stub axle assembly.
This product was added to our catalog on April 31, 2021
TRA1951, Traxxas Half Shafts Long Truck (2)
This is a set of two replacement long half shafts from Traxxas. These half shafts go between the differential, and the rear axle stubs. Set includes two external splined shafts, two internal splined shafts, and four metal universal joints.
Fits:
Traxxas Nitro Rustler
Traxxas Nitro Stampede
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
This product was added to our catalog on April 12, 2021
HRASJT254, Hot Racing Traxxas 32P Steel Spur Gear (Silver) (54T)
This is the Hot Racing Steel 32 Pitch, 54 Tooth Spur Gear with Silver hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4.
Features:
CNC machined and lightened hardened steel construction
Black oxide coating for durability and corrosion resistance
Silver-colored countersunk washers
Specifications:
Number of Teeth: 54
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: 6mm (0.24 inch)
Internal diameter: ~11mm (~0.43 inch)
Includes:
54 tooth 32 pitch spur gear
(3) mounting screws
(3) silver-colored countersunk washers
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
Requires:
Hardened clutch bell or pinon gear
Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
This product was added to our catalog on May 16, 2021
RCE2103, LiPo Battery Charging Safety Sack (300mmx220mm)
Safely and conveniently store, transport, and charge a wide range of LiPo packs with Racer's Edge new safety sack. Easily holds up to five 6S packs. Constructed from durable and flame resistant ballistic material with heavy-duty stitching and aggressive hook & loop closures.
Weight & Dimensions:
Length: 2.250"
Width: 3.625"
Height: 2.250"
Weight: 0.42 lbs
PTK-5042, ProTek RC Sheathed T-Style Plug (2 Male)
These ProTek R/C Sheathed T-Style Connectors are compatible with any standard generic T-Style plug, as well as Deans Ultra Plugs. These connectors feature a plastic protective sheath that snap onto the back of the connector concealing the solder joint.
Typical t-style plugs use shrink tubing which works fine, but provides a one-time solution. Using the sheath, you can snap it on or off to make any connector changes or modification, as well as create a sleek and professional look.
Package includes two male plugs and two protective sheaths.
Features:
T-Style connectors
60A max current
Sheathed backing
Concealed solder joint
Labeled polarity
Professional looks
Specifications:
Rated Current： 36A
Max Current: 60A
Internal Resistance: 0.4mΩ
Net Weight (pair): 5.6g
Recommended Wire: 12AWG
Pulling Force: 25N
Recommended Use: 1000 times
Rated Temperature： -20°C - 120°C (-4°F - 248°F)
Material： Brass and gold plated
This product was added to our catalog on December 16, 2021
PRO10188203, Pro-Line Reaction+ HP Belted Wide Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3)
Pro-Line Reaction+ HP Belted Wide Drag Slick 2.2/3.0 SCT Rear Tires are about 20% wider than the original Reaction HP tire for massively improved grip off the line, which can mean the difference between victory or defeat. Once you reach full throttle, you can have 100% confidence in the stability of this tire because it is belted with an extra wide belt that wraps further into the corners of the tire to prevent any expansion.
The Reaction+ tire is so wide that it will not fit standard width SC wheels, so Pro-Line engineers developed a Wide SC wheel specifically for use with the Reaction+ HP - the Showtime+ Wide SC Wheel (PRO2794-03). Just like the original, the Reaction+ is made from Pro-Line's soft S3 compound, which is a proven winner taking the win and the top 4 spots at the 2021 King of the Streets drag race in Las Vegas. Just like all of Pro-Line's tires, they are proudly Made in the USA!
NOTE: Reaction+ HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. For the Reaction+ HP Wide SC tires that is 90 mph or about 7,000 RPM. Over revving your Reaction+ HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires.
Features:
Nearly 20% Wider than the Original Reaction HP Tire
Massively Improved Grip Off the Line – the Difference Between Victory or Defeat
Extra Wide Molded-in Belt Provides Incredible Stability at High Speed
Wide SC Format Tire only fits Pro-Line Wide SC wheels like the Showtime+ Wide SC wheel (2794-03)
Specifically Made for No-prep Drag Racing
Made from Pro-Line’s Winning S3 compound
Belted Slicks Give You Control to Put the Power Down
Soft Foam Inserts Included
Made in the USA, since 1982
Specifications:
Height: 4.15" (105mm)
Width: 2.12" (54mm)
Includes:
(2) Reaction+ HP Wide SC Drag Racing BELTED Tires
(2) Soft Foam Inserts
This product was added to our catalog on August 10, 2021
SPMXCA508, Spektrum RC 4" IC5 Battery to IC3 Device SMART Battery Adapter Cable
The Spektrum 4" IC5 Battery to IC3 Device SMART Battery Adapter Cable allows you to connect batteries with an IC3 or EC3 connector to an IC5 connector equipped Spektrum Smart device. This adapter features a male bullet/female housing IC3 connector, combined with a female bullet/male housing IC5 connector, that is joined with 4"/100mm long 12awg wire.
This product was added to our catalog on May 31, 2021
TRA6851R, Traxxas Slash 4x4 and Stampede 4x4 Front Heavy Duty Steel CV Driveshaft (2)
This is an optional Traxxas Front Steel Constant-Velocity Driveshaft Set, and is intended for use with the Traxxas Slash 4x4 and Stampede 4x4 1/10 scale trucks. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin.
Traxxas Hoss
Traxxas Rustler 4x4
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 4x4
This product was added to our catalog on May 7, 2021
SPMXCA503, Spektrum RC IC5 Device Connector (2) (Male)
Spektrum IC5 Device Connectors, including two Male IC5 Connectors.
This product was added to our catalog on December 31, 2021
TRA3070R, Traxxas 4S Male ESC Connector
Traxxas 4S Male ESC Connector. This optional connector is designed to allow for single 4S LiPo compatibility to the Traxxas VXL-6S ESC. Package includes two connectors and four terminals.NOTE:
This is for Traxxas ESC use ONLY.
Requires Traxxas TRA8527 jumper for unused battery lead.
This product was added to our catalog on September 7, 2021
TRA7885, Traxxas X-Maxx/XRT LED Light Kit w/High Voltage Controller
Traxxas X-Maxx LED Light Kit with High Voltage Controller. This optional light kit is intended for the Traxxas X-Maxx. The included high voltage amplifier powers both high-power light bars. The regulated output provides stable lighting performance, without flickering or dimming as the battery voltage drops. Package includes one LED light kit, one LED light controller and hardware.
Features:
Compatible with the Velineon VXL-8s ESC
Fully functioning brake lights
Fully waterproof
Low and high beam brightness settings
This product was added to our catalog on September 7, 2021
PTK-1610, ProTek RC "TruGrip" Maximum Traction Tire Compound (4oz)
The ProTek R/C TruGrip Maximum Compound is ideal for racers looking to break-in new tires and when maximum tire softening is desired. It is a great solution for damp, wet or extra slick track surfaces and cool outdoor temperatures. The Maximum compound is the most "potent" of the three compounds.
This product was added to our catalog on December 16, 2021
PTK-5216, ProTek RC Heavy Duty T-Style Ultra Plug Charge Lead (Male to 4mm Banana)
This is the ProTek R/C Heavy Duty T-Style Charge Lead, featuring a T-style ultra plug on one end connected to 4mm banana plugs with high quality 14awg silicone wire.
This charge lead can be used for heavy duty charging due to the 14awg wire, and can be used to charge at rates more than 20 amps. In total length, the lead measures 8.5 inches (21.6cm) long from end to end.
This product was added to our catalog on December 16, 2021
Traxxas Aluminum Steering Bellcrank Set w/Bearings
The Traxxas Aluminum Steering Bellcrank Set with Bearings is a machined aluminum upgrade for the Rustler, Bandit, Nitro Slash, and Slash models. This bellcrank set will enhance steering precision, strength, and looks. These ball bearing equipped bellcranks offer silky smooth operation for reduced friction and long life.
Fits:
Traxxas Bandit
Traxxas Drag Slash
Traxxas Nitro Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
The pre-assembled units are easy to install, include detailed installation instructions, and are available in a variety of anodized colors with laser-etched Traxxas logo.
This product was added to our catalog on April 12, 2021
TRA3773A, Traxxas Anaconda Rear Tires w/All-Star Wheels (2) (Black Chrome) (Standard)
This is a set of two Traxxas Anaconda tires, premounted on chrome All-Star rear wheels, and are intended for use with Traxxas Rustler electric trucks. Choose from Chrome, or Black Chrome finish wheels.
Anaconda performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires are available separately or mounted and pre-glued on futuristic All-Star™ chrome wheels for no-hassle, out-of-the-box bolt-on traction. Molded-foam inserts coupled with the directional tread design provide a balanced feel for the ultimate high-speed on-road experience.
This product was added to our catalog on May 4, 2021
R304SB-E, Futaba R304SB-E T-FHSS 4-Channel Telemetry 2.4GHz Receiver (EP Only)
The Futaba R304SB-E T-FHSS 4-Channel Telemetry 2.4GHz Receiver is only compatible with Futaba T-FHSS telemetry compatible transmitters. The R304SB-E is very similar to the R304SB (FUTL7680) in that they both feature 4-channels, both feature S.Bus2, both are Telemetry enabled and both cost roughly the same price.
However, the two receivers differ in two fundamental areas: this R304SB-E is only intended for electric vehicles and features the benefit of having a non-exposed built-in antenna. The R304SB is compatible with electric/nitro/gas applications and the antenna is fully exposed.
NOTE:
The R304SB-E receiver is recommended for electric powered models only. This is NOT recommended for use with nitro or gas powered models.
Not compatible with the Futaba FHSS, S-FHSS, FASSTest or FASST transmitters.
Features:
T-FHSS System
Telemetry Enabled
4-Channels
Built-in Hidden Antenna
Electric Vehicle Use Only
Specifications:
Futaba System: T-FHSS
S.Bus2: Yes
Channels: 4
Range: 70m (230ft) (at best conditions)
Power Requirement Rated Voltage: 4.8-7.4V
Usable Voltage: 3.5-8.4V
Size: 1.38x0.91x0.33" (35.1x23.2x12.5mm)
Weight: 0.23oz (6.7g)
Number of Ports: 5
PWM Output: 4
SBUS Ports: 0
SBUS2 Ports: 1
FASST: No
Telemetry: Yes (T-FHSS)
S-FHSS: No
High Speed: Yes
High Voltage: Yes
Connector: J (STND)
Range: Only for Electric Powered Car Models
NOTE:
The R304SB-E receiver is recommended for electric powered models only. This is NOT compatible with nitro or gas powered models.
Not compatible with the Futaba S-FHSS, FHSS, FASSTest or FASST transmitters.
This product was added to our catalog on May 4, 2021
TRA6532, Traxxas TQi/Aton Transmitter Phone Mount
The Traxxas TQi/Aton Transmitter Phone Mount provides a secure mounting base for your mobile device on TQi and Aton transmitters.
This product was added to our catalog on April 12, 2021
SPMX223S30, Spektrum RC 3S Smart G2 LiPo 30C Battery Pack (11.1V/2200mAh) w/IC3 Connector
The Spektrum RC 3S Smart G2 LiPo 30C Battery Pack with IC3 Connector provides pilots and drivers with an array of Smart benefits; Not only are charging parameters and performance data stored and uploaded automatically to Smart chargers, but no balance lead is needed — just one easy IC connection.
Smart G2 batteries come from the factory programmed to discharge automatically to a safe storage voltage of 3.90V after 72 hours of inactivity. The benefits include longer battery life, better performance over the life of the pack, and the peace of mind that comes from knowing your Smart battery is maintenance-free. You can change the battery's Auto Storage settings based on your own preferences. G2 batteries also offer a storage discharge rate that's three times faster than the previous G1 Smart batteries.
Enjoy the Smart Battery advantage of not having to set your own charging preferences. When a Smart G2 LiPo battery is connected to a Spektrum Smart charger, its unique charging parameters and health information upload to the charger from the battery's integrated memory microchip. Through the charger you can view and set preferences such as charge rates, so all that's required to charge the pack is connecting it to your Smart charger. That's the Smart Battery Advantage!
Note: G2 batteries require the use of a Spektrum™ G2 Smart Charger or earlier Smart Charger with G2 update.
Features:
Simpler and safer to use
Balance charge through the IC3® or IC5® connector data wire — with only one connection, no balance lead required
Faster Auto Discharge at up to 1.5A to safe storage voltage for long battery life and improved performance
Thicker internal metal side plates protect cells and improve heat dissipation
Integrated microchip stores unique parameters for each battery
IC3® and IC5® connectors are also compatible with EC3™ and EC5™ styles
Specifications:
Capacity: 2200mAh
Hard Case: No
Maximum Charge Rate: 5C
Number of Cells: 3
Application: Aircraft
Product Length: 4.4" (112 mm)
Battery Voltage: 11.1V
Product Width: 1.34" (34 mm)
Battery Capacity: 2000-2999mAh
Normal/Standard Charge Rate: 1C
Technology: Smart
Battery Type: LiPo (3.7V per cell)
Product Height: 0.956" (24mm)
Battery Balance Connector: G2 Smart
Charge Protection Circuitry: Yes
Normal/Standard Charge Current: 2.2A
Maximum Burst Discharge Rate: 30C
Watt Hours: 24.42
Connector Type: IC3
Product Weight: 7.4oz (210g)
Wire Gauge: 12 AWG
This product was added to our catalog on March 19, 2021
PTK-2112, ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Blue/Black)
The ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan is a great option to keep your ESC and motor temps in check. The fan features a machined aluminum case that helps to dissipate heat, allowing cooler operation of the fan motor at high voltage specs. Plus the aluminum frame work adds strength to the assembly, helping protect the fan blades in the event of a crash.
The fan is a true 2S HV component, that has been built to last with dual ball bearings, and pre-wired 30mm long 2 pin JST connector. Plus, we include a 200mm long adapter plug that allows you to connect the fan directly to the receiver or another source of power. The fan can be mounted directly to the chassis with double side tape, or by using an optional fan mount (not included).
NOTE: This fan should be installed at least 5mm away from the motor to allow sufficient air flow and prevent magnet interference.
Features:
30mm aluminum cooling fan
Ideal for ESC and motor applications
Aluminum casing helps protect the fan blades
Compatible with 2S HV LiPo systems (8.75V max)
Anodized black with blue chamfered edges
Perfect for 1/12, 1/10 and 1/8 scale platforms
2 pin JST connector and included extension for easy installation
Product Model
High Speed HV Cooling Fan
Application
1/12 - 1/8 Motor & ESC
Fan Speed
28,000 RPM
Dimensions (LxWxH)
31x31x10.5mm
Mounting Pattern
24x24mm
Material
Aluminum Case w/Plastic Fan
Weight
12.5g
Operation Voltage
5V - 8.75V
Connector
2 Pin JST
Current
0.45A
This product was added to our catalog on December 16, 2021
HRAERVT46M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (46T)
Traxxas E-Revo VXL 2.0
Traxxas Maxx
Traxxas X-Maxx
Traxxas XO-1
Traxxas XRT
The Hot Racing hardened steel Mod 1 spur gear is an optional upgrade for the Traxxas E Revo 2.0, X-Maxx 6S and 8S, Maxx 4S and XO-1 models. Choose from 50, 52 and 54 tooth options.
NOTE:
Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 Adjusting Gear Mesh)
With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.
Features:
CNC machined hardened steel construction
Black oxide finished
Laser etched tooth count marking
Upgrade for factory plastic spur gear
Specifications:
Overall diameter: 52.8mm
Gear face width: 8mm
Includes:
One (1) mod 1 steel spur gear
This product was added to our catalog on December 16, 2021
PTK-5070, ProTek RC QS8 Anti-Spark Connector (1 Male/1 Female)
ProTek RC QS8 Anti-Spark Connectors are a high quality, high current connector that is perfect for high voltage applications. Not only is the connector capable of handling spikes in excess of 300 amps, the design provides an anti-spark connection that eliminates the dreaded POP when you plug in the battery helping to extend the life of the connector. High voltage bashers, speed run enthusiasts and pilots of all disciplines can benefit from this advanced connector technology.
The QS8 connector features 8mm bullets that can accommodate wire up to 6awg, inside a heavy duty nylon/fiber composite housing. Plus, an included plastic wire cap covers the soldered connection and eliminates the need for heat shrink to create an incredibly clean installation that works well, looks great and is easy to manage. NOTE: T-style connector shown in photos is for size reference only, and is not included.
Features:
Anti-Spark Technology Increases Lifespan of Connector
110A Constant/300A Peak Current Rating
8.0mm Gold Plated Brass Bullet
Great for all High Voltage Applications
Nylon/Fiber Composite Housing
Package Includes One Female Connector, One Male Connector & End Cap
Specifications:
Connector Diameter: 8.00mm
Metal Material: Gold Plated Brass
Plastic Material: Fiber Nylon Comp
Flame retardant rating: UL94 V0
Temperature Range: 200C Max
Rated Voltage: 600V DC
Continuous Current: 110A
Peak Current: 300A+
Weight: 41g (Male+Female Set)
Total Length: Approx 70mm (Male & Female w/End Cap)
Width: 29.5mm
Max Wire Gauge: 6awg
Includes:
(1) QS8 Female Anti-Spark Connector
(1) QS8 Male Antispark connector
(2) Wire Caps
NOTE: T-style connector shown in photos is for size reference only, and is not included.
This product was added to our catalog on December 16, 2021
TRA5378X, Traxxas Revo Pivot Ball Caps w/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust
Replacement part for these models:
Traxxas E-Revo VXL 2.0
Traxxas Revo Nitro
This product was added to our catalog on September 7, 2021
PTK-5235, ProTek RC EC3 Style to T-Style Ultra Plug Adapter (Female EC3/Male Ultra)
This is a female EC3 style plug to male T-Style Ultra plug adapter from ProTek R/C.
This product was added to our catalog on October 9, 2021
TRA5827X, Traxxas Battery Expansion Hold Down Retainer Kit
This is an optional Traxxas Battery Hold Down Retainer. This extended battery strap for the Slash and Slash 4x4 allows the use of LiPo packs up to 42mm tall in the stock battery tray. Package includes the battery strap, battery strap retainer, battery post, foam spacer and an angled body clip.
This product was added to our catalog on September 7, 2021
TRA5186A, Traxxas Aluminum Wheelie Bar Wheel Set w/Rubber Tires (Blue) (2)
This is a replacement Traxxas Aluminum Wheelie Bar Wheel Set, and is intended for use with the Traxxas Wheelie Bar Assembly. The precision 6061-T6 aluminum wheels feature a stunning anodized finish and they ride on rubber-sealed 5x8mm ball bearings. For controllable and seemingly never-ending wheelies, Traxxas developed a durable, soft compound rubber tire that reduces side-to-side movement for stable, consistent wheelies. The rubber tires are available separately and they also install on the stock nylon wheels.
Fits:
Traxxas Bandit
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
Traxxas Stampede 4x4
Traxxas Telluride 4x4
This product was added to our catalog on April 7, 2021
SPMX50003S100H3, Spektrum RC 11.1V 5000mAh 3S 100C Smart Hardcase LiPo Battery: IC3
LiPo batteries with Spektrum Smart™ Technology give you more control over your batteries than ever before.
Specifications:
Battery Type
LiPo (3.7V per cell)
Balance Lead Length
about 4 inches
Product Height
1.38 in. (35mm)
Capacity
5000mAh
Maximum Charge Rate
3C
Maximum Continuous Discharge Current
100C
Wire Gauge
12 AWG
Number of Cells
3
Charge Protection Circuitry
Yes
Battery Balance Connector
JST/XH
Battery Capacity
5000-5999mAh
Hard Case
Yes
Search Keywords
smartspmx_surfbat, smartspmx_lipobat
Application
Surface
Connector Type
IC3
Product Length
5.45 in. (138.5mm)
Product Weight
1.09lbs (495g)
Technology
Smart
Battery Voltage
11.1V
Product Width
1.83 in. (46.5mm)
This product was added to our catalog on June 4, 2021
DTXC2369, DuraTrax Pit Tech Deluxe Car Stand (Black)
The Duratrax Pit Tech Deluxe Car Stand is a convenient workstation for your cars and trucks. No matter where you are, or where you are going, the sturdy stand disassembles easily and stores flat, making it perfect for carrying in a toolbox or field bag.
Features:
Ideal for all 1/10 cars, trucks and buggies.
Molded rubber inserts in the upper plate grip chassis securely.
Built-in holes keep shocks handy when rebuilding.
Plate rotates to allow access from all sides; the dropped center accommodates racing chassis with lowered battery channels to provide a stable work platform.
Extra-large parts tray in the base is designed to be easily accessible.
This product was added to our catalog on June 8, 2021
TRA1747R, Traxxas 4mm Aluminum Flanged Serrated Nuts (Blue) (4)
Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking washer keep them snug on the wheel during even the most intense action.
This product was added to our catalog on September 7, 2021
TRA6792, Traxxas Sledgehammer 2.8" Pre-Mounted Tires w/12mm Hex (2) (Black)
Traxxas Sledgehammer 2.8" Pre-Mounted Tires with 12mm Hex. The Sledgehammer tire was designed for extreme traction and control in off-road terrain. The Sledgehammer's increased overall diameter provides additional ground clearance, while the open block tread design clears mud and debris for great traction in loose surfaces. Package includes two pre-mounted tires intended for the Traxxas Rustler 4x4, Hoss 4x4 and Stampede 4x4.
Fits:
Traxxas Hoss
Traxxas Rustler 4x4
Traxxas Stampede 4x4
This product was added to our catalog on September 7, 2021
TRA7740, Traxxas X-Maxx/XRT Hardened Steel Suspension Pin Set (1x 4x85mm, 3x 4x47mm & 2x 4x33mm)
Hardened steel suspension pin set includes 4x85 mm pin, 4x47 mm pins (3), 4x33 mm pins (2). Fits one corner. (Four sets required for entire truck)
This product was added to our catalog on May 7, 2021
