Traxxas Steel Mod 1.0 Pinion Gear w/5mm Bore (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
Traxxas Steel Mod 1.0 Pinion Gear. This durable steel pinion gear has a 5mm bore and a Mod 1 tooth pitch, making it compatible with a variety of applications. The gear is available in a variety of tooth count options, please select the specific gear you want from the pull down list above. Package includes pinion gear and set screw.
This product was added to our catalog on April 12, 2021
TRA3070X, Traxxas TRX Device Connector (2 Male)
Traxxas TRX Device Connector. Package includes two replacement connectors intended for Traxxas ESC's. NOTE: These connectors should only be used as replacement connectors for a Traxxas ESC.
This product was added to our catalog on May 7, 2021
TRA2754, Traxxas Stub Axle Pins (4)
This is a set of four replacement rear axle stub pins from Traxxas. These axle stub pins go through the axle stub, and lock into the wheel hubs.
This product was added to our catalog on April 12, 2021
TRA5116A, Traxxas 5x11x4mm Ball Bearings (2)
Pair of 5x11x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty environments.
This product was added to our catalog on September 7, 2021
TRA3740, Traxxas Suspension King Pins w/ E-Clips (2)
This is a set of two replacement suspension king pins with e-clips from Traxxas.
This product was added to our catalog on April 29, 2021
TRA3768, Traxxas Shock Spring Retainers (Upper & Lower)
Upper and lower spring retainers for Ultra Shocks with 2-hole pistons (2) and 3-hole pistons (2)
This product was added to our catalog on September 7, 2021
TRA3458, Traxxas Velineon 540XL Motor Heat Sink
The Traxxas Velineon 540XL Motor Heat Sink fits Velineon XL brushless motors TRX3351R and TRX3461 when installed in 4X4 vehicles. (Does not fit 2WD configurations)
This product was added to our catalog on May 7, 2021
TRA6852X, Traxxas Heavy Duty Rear Driveshaft Assembly
This is a replacement Traxxas Heavy Duty Rear Driveshaft Assembly, and is intended for use with the Traxxas Stampede 4x4. This package includes the parts needed to replace one rear driveshaft.
Fits:
Traxxas Nitro Slash
Traxxas Rally
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 4x4
This product was added to our catalog on May 7, 2021
TRA7511, Traxxas LaTrax 1/18 Rally Body (Clear)
This is an optional LaTrax 1/18 Rally Clear Body. This tough, rally-inspired body design is clear, pre-cut and ready for your custom paint job. Package includes a body and window/grill detail decals.
This product was added to our catalog on September 7, 2021
YEA-TRSL-015RBU, Yeah Racing Traxxas Slash/Stampede 4x4 HD Rear Driveshafts (Blue)
Yeah Racing Traxxas Slash/Stampede 4x4 HD Rear Driveshafts. These optional driveshafts are made from tool grade steel to provide extreme strength. The center section of the shaft is made from aluminum to keep weight low providing an excellent balance between weight and strength. Package includes two drive shafts intended for the Traxxas Slash 4x4 or Stampede 4x4.
This product was added to our catalog on December 16, 2021
Traxxas 32P Hardened Steel Pinion Gear w/5mm Bore
These are Traxxas 32 Pitch Hardened Steel Pinion Gears. These gears are used for various Traxxas models and feature 5mm Bore center hole, compatible with 5mm motor shafts.
This product was added to our catalog on April 12, 2021
HRAAC03EZ02, Hot Racing 1/10 Aluminum EZ Pulls w/Body Clips (Red) (4)
The Hot Racing 1/10 Aluminum EZ Pulls with Body Clips are an optional accessory for any 1/10 scale to upgrade the body clips and add a little pop of color. The pulls are CNC machined from durable Aluminum for lasting performance and anodized a variety of colors for added strength and style. Attach the pulls to the included body clips to minimize the fumbling and struggle of removing the body from the mounting posts.
Features:
CNC Machine from durable Aluminum
Anodized a variety of colors
Remove body clips with ease
Specifications:
EZ pulls: 0.4 x 0.71 (10 x 18mm)
Body clips: 0.35 x 1.02 (08 x 22mm)
Includes:
(4) EZ Pulls
(8) Body clips
This product was added to our catalog on December 16, 2021
PRO603100, Pro-Line Pro-Bond CA Tire Glue (0.7oz)
This is a 0.7 ounce bottle of Pro-Line Pro-Bond CA Tire Glue. Pro-Line’s Pro-Bond Tire Glue has a hold strength of 3,200 PSI (Test Method: Steel on Steel in Tensile Shear) which is the highest strength of any tire glue available. Pro-Line’s unique glue formula also provides the fastest drying glue possible while drying crystal clear with no yellowing or whitening found when gluing tires with other glues. The Pro-Line development team did not just stop with improving the glue. Pro-Line Engineers began the design process with the clear goal of revolutionizing the glue delivery system (bottle and applicator tip).The Pro-Line Pro-Bond Tire Glue features a super soft and squeezable round bottle that improves feel as you apply the glue, with the added benefit of the round bottle being significantly more stable on your pit table when compared to the elliptical shape found in all other glue bottles. The single biggest advancement of the Pro-Bond Tire Glue system is the translucent yellow Pro-Bond applicator tips. The tips are specifically intended around Pro-Line’s exclusive round bottle design and snap into place for a secure fit while gluing. The Pro-Bond applicator tips are re-usable unlike the throw-away tubes and have the perfect size applicator hole for gluing tires.
Features:
Custom Glue Formula Specifically Designed for Maximum Bond with Tires
Super-Fast and Crystal Clear Drying
Maximum Strength Bond – 3,200 PSI Holding Strength
Unique Super Soft Round Bottle for Optimum Feel and Stability
Re-Usable Snap Fit Yellow Pro-Bond Applicator Tips
Includes:
(1) Pro-Bond Tire Glue (0.7oz/20g)
(2) Pro-Bond Yellow Applicator Tips
This product was added to our catalog on April 18, 2023
TRA1747, Traxxas 4mm Locknut (10)
Nuts, 4mm nylon locking (10)
Set of ten 4 mm Nylon locking nuts
This product was added to our catalog on September 7, 2021
TRA2912, Traxxas Power Adapter AC USB-C 45W
Power adapter, AC, USB-C (45W) (110 volt, North America only)
This product was added to our catalog on September 27, 2023
TRA6851X, Traxxas Heavy Duty Front Driveshaft Assembly
Fits:
Traxxas Rally
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 4x4
This product was added to our catalog on September 7, 2021
TRA3643, Traxxas 49mm Camber Link Turnbuckle (2) (82mm center to center)
This is a pack of two replacement Traxxas 49mm Turnbuckles. These turnbuckles are 82mm from center to center and come assembled with rod ends and hollow balls. Package includes one left and one right side.
Fits:
Traxxas Hoss
Traxxas Rally
Traxxas Rustler 2wd
Traxxas Rustler 4x4
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 2wd
Traxxas Stampede 4x4
Traxxas XO-1
This product was added to our catalog on April 7, 2021
TRA2916, Traxxas Power Cable USB-C 100W
Power Cable, USB-C, 100W (high output), 5 ft. (1.5m)
This product was added to our catalog on September 27, 2023
TRA3437, Traxxas Hobby Knife w/5-Pack Blades
The Traxxas Hobby Knife is built tough to provide years of use. Featuring a high quality aluminum handle and carbon steel blades. Each hobby knife set includes a slip-resistant knurled aluminum handle. Designed to securely hold a variety of industry standard blades, the handle is finished with an engraved Traxxas logo.
This product was added to our catalog on April 17, 2021
TRA5116, Traxxas 5x11x4mm Ball Bearing (TMX 3.3, Revo) (2)
Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction.
This product was added to our catalog on September 7, 2021
TRA3064X, Traxxas Parallel Battery Wire Harness (Traxxas ID)
Traxxas Parallel Battery Wire Harness. Use the parallel harness to combine battery capacity and get extra long runtimes of your model. Dual-battery operation requires attention to precautions outlined in the model's owners manual. Follow all precautions to assure peak performance and reliability of your model and batteries.
Traxxas parallel and series Y-harnesses are for use with 2/3A battery packs only.
This product was added to our catalog on September 7, 2021
TRA2823X, Traxxas 3S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (11.1V/1400mAh)
NOTE: Traxxas VXL Brushless models are 3S/2S LiPo compatible; XL-5 Brushed models are only 2S LiPo compatible! Keep this in mind when choosing a battery for your Traxxas model.
This is the Traxxas 3S, 11.1V, 1400mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge!
All Traxxas iD Power Cell Battery Packs are optimized for free-flowing power and maximum punch with premium quality, low-resistance cells; flexible, silicone-jacketed 12-gauge wire; heavy-duty welded tabs; and patented Traxxas' high-output, gold plated, High-Current Connectors.
High-Current Connector
Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards.
Charging with a Traxxas iD Charger
The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus (TRA2970) recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus does all the work for you.
Features:
Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time.
Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run.
Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times.
Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs.
Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery.
Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models.
Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked!
Specifications:
Type: LiPo
Total Capacity: 1400
Voltage: 11.1
Continuous Discharge: 25C (35A)
Max Burst Rate: 50C (70A)
Watt Hours: 15.54
Max Charge Rate: 1C (2.8)
Dimensions: 88x20x35mm
Weight: 4.2oz (118g)
CHARGING NOTE: This battery can only be safely charged with a Traxxas iD Battery Charger. NEVER, UNDER ANY CIRCUMSTANCES, charge this battery using a non Traxxas iD Battery Charger.
This product was added to our catalog on May 7, 2021
PTK-5211, ProTek RC Heavy Duty 15cm Universal Servo Y Extension Lead (1 Male/2 Female)
This is one 15cm (6") universal servo Y extension lead from ProTek R/C. These are excellent servo extension leads made with thick, high quality 22awg wire for maximum current carrying capacity and strength.
The male plug installed on these extension leads are JR style connectors and will work with any radio system. The two female ends are designed to accept Futaba connectors, as well as JR, Aitronics and HiTec connectors. When plugging JR style connectors into the female connector, be sure to check for the correct polarity.
This product was added to our catalog on December 16, 2021
TRA7539, Traxxas Camber Rods, 2-Degree/3-Degree (6 Each)
Camber rods, 2-degree/3-degree (6 each)
Tune the handling of your LaTrax rally by changing the camber with these 2° and 3° camber rods.
This product was added to our catalog on May 7, 2021
TRA2889X, Traxxas Maxx 4S 25C LiPo Battery (14.8V/5000mAh)
This is a Traxxas 5000Mah 14.8V 4-Cell 25C Lipo Battery, a Certified iD-Equipped LiPo battery that is engineered to provide the punch and on-demand power for achieving the top speeds that Traxxas models designed to reach. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available.
Specifications:
Type: LiPo
Total Capacity: 5000mAh
Voltage: 14.8V
C Rating: 25
Length: 155mm
Height: 34mm
Width: 45mm
Weight: 16.8g
This product was added to our catalog on April 7, 2021
TRA1815, Traxxas Universal Body Washers
Body washers (8)
Body washers reinforce the mounting point surface area to help prevent body clips from pulling through the body.
This product was added to our catalog on September 7, 2021
TRA2046, Traxxas Servo connector, Y adapter (for dual-servo steering)
The Y-adapter allows you to connect two servos to a single receiver port for trucks with dual-servo steering.
This product was added to our catalog on May 7, 2021
TRA3170X, Traxxas 4-Cell Battery Holder w/Switch
4 AA battery holder with receiver-style connector with On/Off switch
This product was added to our catalog on September 7, 2021
TRA7550R, Traxxas LaTrax Aluminum Driveshaft Assembly (Blue) (2)
This is an optional LaTrax Aluminum Driveshaft Assembly. Package includes two factory assembled driveshafts that can be used on the front or rear of the chassis, and two wheel nuts.
This product was added to our catalog on September 7, 2021
PTK-8151, ProTek RC Pit Mat w/Closeable Mesh Bag (120x60cm)
This is the ProTek R/C Pit Mat. The ProTek R/C pit mat will take your work space from suitable, to stunning. With a 24 x 48 footprint and nearly 8 square feet of coverage, this mat is the perfect size for your work space. Made from durable 4mm thick foam material, this mat is easy to clean, roll up and store away. Plus, unlike other pit mats, the ProTek R/C Pit Mat includes a closeable mesh carry bag that makes it easy to throw the mat over your shoulder and haul around. Ditch the dirty towels and silly rubber mats, and start wrenching like a boss with this high quality mat from ProTek R/C.
Features:
Approximately 24 x 48 in. (60 x 120 cm)
Textured surface helps to prevent parts rolling onto the floor
4mm thick padded material provides clean, flat, anti-fatigue surface
Closeable, mesh bag makes for easy storage and transportation
Eye-catching ProTek R/C Styling
This product was added to our catalog on December 2, 2021
TRA7541X, Traxxas LaTrax Bearing Set
This is an optional LaTrax Bearing Set. Package includes all the bearings needed to convert the entire drivetrain to bearings. This helps to improve speed and efficiency compared to the bushings that are included in the kit.
Includes:
(2) 4x8mm Bearings
(8) 6x10mm Bearings
(5) 8x12mm Bearings
This product was added to our catalog on September 7, 2021
TRA5891, Traxxas Paddle Tires w/SCT Split Spoke Rear Wheel (2) (Black/Chrome)
Accessory part for these models:
Ford F-150 Raptor
Slash 2WD Unassembled Kit
Slash 4X4 Platinum
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash VXL
Slash
Traxxas Paddle Tires let you tear up sand, snow - and even water! These short course size paddles are pre-mounted on Split Spoke Slash Rear Wheels that will fit a variety of trucks, and will allow you to explore a whole new dimension of traction. Package includes two pre-mounted tires.
This product was added to our catalog on May 7, 2021
Traxxas Aluminum Center Driveshaft
his is a replacement Traxxas Aluminum Center Driveshaft, and is intended for use with the Traxxas Slash 4x4 short course truck.
This product was added to our catalog on September 7, 2021
TRA6852R, Traxxas Rear Heavy Duty Steel CV Driveshaft (2)
This is an optional Traxxas Rear Steel Constant-Velocity Driveshaft Set, and is intended for use with the Traxxas Slash 4X4 and Slash 2wd 1/10 scale short course trucks, as well as the Traxxas Rally. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and blue silicone boots add a custom look.
This product was added to our catalog on September 7, 2021
TRA3975R, Traxxas TRX-4 Titan 550 Reverse Rotation Motor (21T)
The Titan 550 is a 21-turn fan-cooled 550 size motor capable of handling 14.4 volts. This powerful motor has a 30% longer armature than a standard 540 size motor for extreme monster torque.
Key Features:
21 turn/ 14V
fan-cooled
30% longer armature
This product was added to our catalog on September 7, 2021
