YEA-MG-10010, Yeah Racing Hardened Steel Mod 1 Pinion Gear (5mm Bore) (20T)
Yeah Racing Hardened Steel Mod 1 Pinion Gear. Made from HD steel for extreme durability and strength. These pinions use a 5mm bore and are laser etched with pitch and teeth count for easy identification. These pinions are available in multiple sizes. Please select the size you need from the list above.
Features:
Made from hardened steel
Uses a 5mm bore
Laser etched with pitch and teeth count
This product was added to our catalog on November 26, 2021
PRO10170203, Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3)
Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires feature a High-Performance herringbone weave pattern Belt molded inside the tire. These belted slick Drag Racing tires were specifically made for no-prep Drag racing and will not balloon or expand during use, giving you more control when you are putting down the power! The Reaction HP SC tires provide the incredible grip that you expect from Pro-Line but will also provide unmatched stability. Just like all of Pro-Line's tires, they are proudly Made in the USA!
NOTE: Reaction HP tires have a maximum speed rating that, if exceeded, could result in permanent damage to the internal belt. For the Reaction HP SC tires that is 90 mph or about 7,000 RPM. Over revving your Reaction HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires.
Features:
Molded-in High-Performance Herringbone Weave Pattern Belt
Reaction HP Tire Will Not Balloon or Expand During Use
Specifically Made for No-prep Drag Racing
Available in Soft S3 and the Super Soft Ultra Blue compound to provide incredible grip
Belted Slicks Give You Control to Put the Power Down
Soft Foam Inserts Included
For use with Pro-Line 2.2"/3.0" Wheels like the Pomona Drag Specific Wheel
Made in the USA, since 1982
Specifications:
Height: 4.15" (105mm)
Width: 1.80" (46mm)
Includes:
(2) Reaction HP SC 2.2"/3.0" Drag Racing BELTED Tires
(2) Soft Foam Inserts
This product was added to our catalog on November 21, 2021
TRA3770A, Traxxas Alias Rear Tires w/All-Star Wheels (2) (Black Chrome) (Standard)
This is a set of two premounted Traxxas Alias Rear tires, mounted on All Star wheels. Choose from Black Chrome or Chrome finish.
This product was added to our catalog on September 7, 2021
TRA5830, Traxxas Slash 2WD LCG Conversion Kit
This is an optional Traxxas Slash 2WD LCG Conversion Kit. Traxxas now offers a complete Low Center-of-Gravity chassis conversion kit for 2WD Slash trucks! The Low-CG Conversion Kit lowers the chassis, battery, and electronic components to bring all the advantages of a low center of gravity to the 2WD short-course trucks including the Slash, Raptor, and Robby Gordon Edition Dakar Slash. No matter where you want to race, on the track or off, you will experience superior handling and better corner speed. The conversion kit includes all the parts and hardware required to convert one 2WD Slash to the Low-CG configuration.
The complete Low-CG Conversion Kit includes a blue low-CG chassis, black nerf bars and lower chassis, battery hold down, optimized low-CG front shock springs, and hardware. For personalized Slash low-CG chassis customization, the low-CG chassis, lower chassis, and nerf bars are also available separately in three colors: black, blue, and grey.
Features:
Complete kit, no additional parts required
Lowers chassis over one inch (1.3 in/33mm)
Battery positioned 45% lower compared to standard chassis
Low-CG enhances handling and increases cornering speed
Genuine Traxxas quality and precision
This product was added to our catalog on May 7, 2021
HRASHS88H25, Hot Racing Direct Drive (No adapters) Heavy Duty Aluminum Servo Saver 25 Tooth
Features:
CNC 6061-T6 aluminum construction
Black anodized
25 tooth (Futaba, Traxxas, SAVOX, Tactic) servo
Specifications:
Length: 1-1/2 inch (38mm)
Diameter: 1 inch (25mm)
This product was added to our catalog on January 9, 2022
TRA3632A, Traxxas Aluminum 30° Caster Blocks (Blue) (2)
Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on Rustler, Stampede, and the Slash. In addition to the strength and precision of the machined billet 6061-T6 aluminum these are anodized in a variety of color options and feature a high-contrast laser etched TRX logo. Simple bolt-on installation that anyone can perform inspires confidence for future upgrades. Package contains one right front 30° caster block, one left front 30° caster block and two suspension screw pins.
This product was added to our catalog on May 7, 2021
PTK-5141-22, ProTek RC 2S 50C 1100mAh Losi Mini T/B & JRX2 LiPo Battery w/EC2 Connector
The Protek R/C 2S 50C 1100mAh Losi Mini T/B and JRX2 LiPo Battery is built with performance in mind. Using Silicon Graphene technology this battery packs a punch with it's 50c discharge rating! Designed to work with the Losi Mini T, B and Mini JRX2 this pack offers extended runtimes with it's larger 1100mah capacity. Equipped with an EC2 style connector makes this a plug in option with no need to mess with adapters or to get out the soldering iron. With more time on the track and the ability to dish out the power this Protek battery pack is an excellent upgrade for your Mini T, B or JRX2 vehicles.
Features:
Direct fit for Losi Mini B, T and JRX2 vehicles
More runtime, with a dramatic increase in punch
Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery
Improved efficiency, lower operating temperatures, and lower internal resistance!
Factory installed EC2 plug
Battery Model
2s 50C 1100mAh
Application
Air, Ground
Type
Silicon Graphene
Voltage
7.4V nominal
Capacity @7.4V
1100mAh
Weight
68g
Connector Type
EC2
Balance Connector
XH Connector
Number of Cells
2 Cell
Configuration
2S1P
Dimensions (LxWxH)
58x32x20mm
Maximum Charge Rate
4C (4.4A)
Watt Hour @7.4V
8.14Wh
Includes:
(1) ProTek R/C Battery
This product was added to our catalog on September 1, 2022
HRAERVT54M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (54T)
Traxxas E-Revo VXL 2.0
Traxxas Maxx
Traxxas X-Maxx
Traxxas XO-1
Traxxas XRT
This product was added to our catalog on December 16, 2021
TRA8994, Traxxas WideMaxx Stub Axle Assembly
Replacement WideMaxx® outer stub axle assembly. Fits front or rear, left or right side.
This product was added to our catalog on September 7, 2021
Arrma Safe-D5 Mod1 Pinion Gear
Arrma Safe-D5 Mod1 Pinion Gears feature a "D" shaped hole that allows the motor shaft to key inside the pinion gear, eliminating the loss of drive and brakes if the set screws comes loose. This tough steel Pinion Gear is available in multiple tooth count options, allowing you to fine tune the gear ratio.
Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision manufactured wide tooth profile for smooth operation
'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out
Suits 5mm motor shaft diameter
Precision manufactured threaded set-screw hole
E-clip supplied for motor shaft pinion retention
Includes:
(1) Mod1 Safe-D Pinion Gear
(1) Set Screw - M4 x 4mm
(1) E-Clip - 3.2mm
This product was added to our catalog on March 14, 2021
TRA3669, Traxxas Talon Front Tires w/All-Star Wheels (2) (Chrome)
This is a pack of two Traxxas Talon Front Tires, premounted on All Star wheels. The Traxxas 2.8" Talon tires are the most versatile all-terrain tires available for your Traxxas model. The directional long-wear tread pattern provides extended tire life, while providing exceptional traction on most any surface. The 2.8" Talon integrates a soft rubber compound, large foam inserts, and a go-anywhere design that allows it to excel on asphalt as well as rocks, grass, dirt, or any other surface. The tapered tread design where the treads meet the sidewall enables the tire to slide on asphalt, to help avoid unwanted traction rolls. Increase the ride height and ground clearance of any Traxxas stadium truck by adding a set 2.8" Talon tires.*
Traxxas’ 2.8" All-Star and Twin-Spoke wheels redefine looks and convention by combining structural strength and futuristic stylings. The state-of-the-art design features a brilliant mirror-chrome face. The horizontal bead helps grab the tire, reducing the stress placed on the glue joint by tire expansion.
*NOTE: When using 2.8" Talon tires on the electric Rustler use a pinion gear that is 4-5 teeth smaller than stock
Features:
Talon Tires (with foam inserts) pre-glued on 2.8" All-Star Mirror Chrome Wheels
Durable nylon won't bend or corrode
Strong and lightweight for better suspension performance
Mirror-chrome finish
Genuine Traxxas quality and fit
Fits:
Traxxas Hoss
Traxxas Nitro Stampede
Traxxas Stampede 2wd
Traxxas Stampede 4x4
This product was added to our catalog on May 7, 2021
TRA7560X, Traxxas LaTrax Aluminum Oil Filled Shock Set w/Springs (4)
This is an optional LaTrax Aluminum Oil Filled Shock Set. These shocks feature machined aluminum, threaded shock bodies for smooth, precision suspension response. Additionally, the ability to hold oil improves performance, as well as delivers an increased level of tuning options by allowing the user to tune the suspension with different oil weights. Package includes four pre-built shocks, eight shock mount ball studs, and a bottle of LaTrax 30wt shock oil.
NOTE: Shocks are empty, and must be filled with oil prior to use.
This product was added to our catalog on September 7, 2021
HRAERVT50M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (50T)
Traxxas E-Revo VXL 2.0
Traxxas Maxx
Traxxas X-Maxx
Traxxas XRT
Traxxas XO-1
This product was added to our catalog on December 16, 2021
TRA8996, DRIVESHAFT ASSMBLY WIDEMAXX
This is an optional Traxxas WideMaxx Driveshaft Assembly. This driveshaft can be used in the left or right position. This is a fully assembled driveshaft assembly with an included screw pin. These parts are intended for use with the Traxxas Maxx equipped with the optional WideMaxx suspension kit (TRA8995)
This product was added to our catalog on September 7, 2021
TRA6747, Traxxas Steel 32P Pinion Gear (11T)
Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw
11-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.
This product was added to our catalog on May 7, 2021
TRA8247X, Traxxas TRX-4 Metal Steering Servo Horn
Traxxas TRX-4 Metal Steering Servo Horn. This is the optional sintered metal servo horn. Package includes one horn and one 3x14 button head screw.
This servo horn is compatible with any standard servo featuring a 25 tooth spline.
This product was added to our catalog on September 7, 2021
TRA3762A, Traxxas Ultra Shocks (XX-Long) (Grey) (2)
This is a set of replacement Traxxas XX-Long Grey Plastic Ultra Shocks. There are two shocks per package. They come with damper oil, springs, and preload spacers. These shocks are the stock replacement for the rear shocks on the Traxxas Rustler, Stampede. Nitro Stampede, Nitro Rustler, and Nitro Sport. They also fit front or rear on the T-Maxx or E-Maxx.
This product was added to our catalog on September 7, 2021
TRA3478, Traxxas Sledge Cooling Fan Wiring Harness
Traxxas Sledge Cooling Fan Wiring Harness. This replacement wiring harness is intended for the Traxxas Sledge equipped with the TRA3475 Cooling Fan. Package includes one wiring harness and one zip-tie.
This product was added to our catalog on August 1, 2022
Traxxas Machined Mod 1.0 Pinion Gear w/5mm Bore
Traxxas Machined Mod 1.0 Pinion Gear with 5mm Bore. This is an optional machined pinion gear intended for the Traxxas E-Revo 2.0 and the Traxxas Maxx.
The gear is available in a variety of tooth count options, please select the specific gear you want. Package includes one pinion gear.
NOTE: For use with steel spur gears.
This product was added to our catalog on April 12, 2021
TRA7754X, Traxxas X-Maxx/XRT Drive Cup (8S Spec)
This is a replacement Traxxas X-Maxx/XRT Drive Cup for use with the 8S-spec heavy duty driveshaft (TRA7750X) only.
This product was added to our catalog on September 7, 2021
TRA7743, Traxxas X-Maxx/XRT Suspension Pin Retainer (4)
Set of four replacement suspension pin retainers for hardened steel suspension pins.
This product was added to our catalog on September 7, 2021
Traxxas Battery Hold Down Plate
This is a replacement battery hold down plate with posts, and clips from Traxxas.
Traxxas Bandit
Traxxas Rustler 2wd
Traxxas Slash 2wd
This product was added to our catalog on September 7, 2021
2969 - Charger, AC, 2 amp NiMH peak detecting (5-7 cell, 6.0-8.4 volt, NiMH only)
TRA2969, 2AMP CHARGER AC
This product was added to our catalog on September 7, 2021
TRA3034, Traxxas Wiring Harness (RX Power Pack)
Wiring harness for RX Power Pack, Traxxas® nitro vehicles (includes on/off switch and charge jack)
This custom wiring harness simplifies the installation of a rechargeable receiver pack system in your Traxxas nitro model. It includes the on/off switch and a built-in charge jack, eliminating tedious splicing and soldering.
Accessory part for these models:
T-Maxx®
Nitro Rustler®
T-Maxx®
This product was added to our catalog on September 7, 2021
TRA6795, Traxxas Rustler 4x4 LED Light Set
The Traxxas Rustler 4x4 LED Light Set is an optional high-output off road LED light kit with a redesigned front bumper and roof skid. These pieces are made from a super tough composite material, and feature two forward facing bright-white LED light bars along with one rear light bar in red. The system is regulated by a chassis-mounted power supply for reliable lighting on all battery voltages. The Rustler 4X4 LED light kit keeps the fun going past sunset to add a new dimension to the Rustler 4X4 experience.
Features:
Efficient, high-intensity LED lighting
Front bumper with integrated LED lights
Roof skid with integrated front and rear light bars
Regulated power supply for stable lighting performance
Easy installation with included power tap connector
Includes:
(1) Front bumper with integrated LED light bar
(1) Roof skid with front and rear light bar
(1) Power Tap Connector
(1) 3V power supply
Misc. Hardware
This product was added to our catalog on May 7, 2021
TRA7650R, Traxxas LaTrax Aluminum Front/Rear Driveshaft (2) (Blue)
This is a pack of two optional LaTrax Aluminum Driveshafts. These blue anodized driveshafts are crafted from 6061-T6 aluminum alloy material and provide a direct fit for either the front or rear location in the vehicle. Package also includes two axle screws.
This product was added to our catalog on April 19, 2021
TRA1654R, Traxxas Wheel Hubs Hex Steel 4/Axle Pins 4
Wheel hubs, hex (steel) (2)/ axle pins (2)
12 mm steel wheel hex hubs provide superior strength and durability for high-horsepower applications.
This product was added to our catalog on April 16, 2021
TRA9798, Traxxas TRX-4M Utility Trailer Side Panels
The Traxxas TRX-4M Utility Trailer Side Panels are a great option to add scale detail to your mini crawler. Designed specifically for the Traxxas TRX-4M Utility Trailer (not included), these panels are made from molded composite and are given a realistic wood grain finish. Increase the hauling capacity of your TRX-4M with these panels! Package includes one side panel set.NOTE: Utility Trailer sold separately (TRA9795).
This product was added to our catalog on September 7, 2021
PRO1016810, Pro-Line Trencher HP Belted 2.8" Pre-Mounted Truck Tires (M2) (2) (Black) w/Raid Rear Wheels
This is a pair of Pro-Line Trencher Belted 2.8" M2 Compound Tires, Pre-Mounted on Raid Rear Wheels. Pro-Line is proud to introduce the History making Trencher HP 2.8" BELTED All Terrain Truck Tires! Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the relentless, tall and grippy tread of the Trencher HP. These are not your average belted tires! Made for All Terrain bashing, the Trencher HP 2.8" tires will not balloon or expand during use and will still provide the incredible grip that you expect from Pro-Line tires due to the soft M2 compound. Just like all Pro-Line's tires, they are proudly Made in the USA! Just like the original Trencher 2.8" tire, the next generation Trencher HP 2.8" is destined to become the ultimate, go-to Bash tire for your truck!
The Belted Trencher HP 2.8" tires come Pre-Mounted on the next generation 2.8" wheel design from Pro-Line, the Raid 2.8" Removable Hex Wheel! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! You can go from the included 12mm narrow offset (2wd Stampede®/Rustler® Rear) to the included 12mm wide offset hexes (2wd Stampede®/Rustler® Front and 4x4 Stampede®/Rustler® Front and Rear) quickly and easily.
Also, imagine being able to replace a damaged wheel hex without needing to replace your glued tires (PRO6335-00 Replacement Hexes). You can even upgrade your wheels to 17mm wheel hexes (PRO6336-00 Sold Separately) or go for Aluminum hex adapters for extreme bashing fun! These Raid 2.8" wheels accomplish all of this and more by using Pro-Line's unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the Trencher HP 2.8" Belted tires now!
PLEASE NOTE: The Trencher HP tires are not meant to be extreme speed run tires and have achieved up to 75 mph or about 5,000 RPM under ideal conditions in testing. Over revving your Trencher HP tires could result in breaking the internal belt, which will NOT be covered under manufacturer warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free spinning tire or tires.
Features:
Tires:
Molded-in High-Performance Herringbone Weave Pattern Belt
Trencher HP Tire Will Not Balloon or Expand at High Speed
Horizontal H Shaped Tread for Ridiculous Amounts of Traction and Stability
Over-sized Tall Tread is Second-to-none in Durability and Longevity
Perfect for 2.8" Monster Trucks
Extremely Detailed Sidewall Design for that Tough Off-Road Look
Optimum Handling, Durability and Longevity
Made in the Legendary M2 Compound
Made in the USA, since 1982 - Read about Pro-Line Racing's History
Wheels:
Removable Hexes Allow you to Change Wheel Offsets on the Fly
Easily Replace Damaged Hexes or Upgrade to 17mm hexes
The 2 Most Common 12mm Offsets are Included
Fits any of Pro-Line's 6x30 Removable Wheel Hexes
Wheel Made from High-strength, Durable DuPont Nylon Material
Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
M3 Wheel Hex Hardware Included
Specifications:
Height: 4.87" (123.7mm)
Width: 2.86" (72.64mm)
What's Included:
(2) Pre-mounted Trencher HP 2.8" Belted Tires on Raid Black 6x30 Removable Hex Wheels
(2 of each) 6x30 to 12mm Hex Adapters (Narrow & Wide)
(12) M3 x 12mm long SHCS hardware
Fits:
Stampede 2wd
Stampede 4x4
Rustler 2wd
Rustler 4x4
JATO Rear
This product was added to our catalog on May 7, 2021
TRA2753X, Traxxas Rear Stub Axles (2)
Replacement part for these models:
Traxxas Bandit
Traxxas Nitro Rustler
Traxxas Nitro Sport
Traxxas Nitro Stampede
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
This product was added to our catalog on May 7, 2021
TRA3760, Traxxas Ultra Shocks (Long) (Black) (2)
This is a set of two replacement long shocks from Traxxas. Includes all parts to build two shocks.
This product was added to our catalog or updated on April 4, 2022
RCE6412, Racers Edge Li-Ion 7.4V 1300mAh Battery Pack (TYPE 18500) w/T-Plug for Blackzon Slyder
This product was added to our catalog on October 28, 2021
PTK-5350, ProTek RC Heavy Duty EC5 Charge Lead Adapter (Male EC5 to Female XT60)
The ProTek R/C Heavy Duty EC5 Charge Lead Adapter features a "male" EC5 connector with male bullets, connected to a female XT60. Thanks to the 4 inch long 14awg wire, this adapter can be used for heavy duty charging and can handle charge rates more than 20 amps. This adapter can also be used for ESC to battery connections in some applications, allowing you to connect your EC5 equipped battery to an ESC with an XT60.
This product was added to our catalog on December 16, 2021
TRA2998, Traxxas EZ-Peak Live 4S "Completer Pack" Multi-Chemistry Battery Charger w/One Power Cell 4S Batteries (6700mAh)
Traxxas EZ-Peak Live 4S "Completer Pack" Multi-Chemistry Battery Charger that includes One Power Cell 4S Battery. The pack includes one 4-cell 6700mAh iD LiPo battery. Traxxas iD batteries are the easiest and safest LiPo charging solution when used with Traxxas exclusive iD chargers. You just plug in your iD battery and press start. The iD charger handles all the settings and quickly gives you an optimized charge every time.
Features:
Charger Features:
75-Watt 8-amp high output
Easy to use interface with charge progress indicator and audible alerts
Automatically recognizes Traxxas iD® batteries for optimal charger settings
Optimized for faster LiPo balance charging
One-button LiPo storage charge protects your battery investment
Advanced high-resolution peak detection delivers a perfect charge
Built-in cooling fan
Advanced Mode for full manual control of charger settings
Built-in balance port for conventional LiPo batteries
Charges 5-8-cell NiMH Traxxas iD® Batteries
Charges 2S, 3S, and 4S LiPo Traxxas iD® Batteries
Battery Features:
Traxxas High-Current Connectors
Integrated LiPo Balance Charging Wires
Semi-Rigid Construction for efficient packaging
Oversized Discharge Tabs for minimum resistance
Hard-wired 12-gauge Maxx Cable soldered to cells
Center Wire Exit for guaranteed proper fitment
Charger Specifications:
AC Input: 100-240V, 50-60Hz, 1.2A
Charge Current Range: Up to 8A
Discharge Current Range: 500mA
Current Drain for Balance Ports: 500mA
NiMH Battery Cell Count: 5-8 Cells
LiPo Cell Count: 2-4 Cells
Net Weight: 365g
Dimensions: 121 x 161 x 54 mm
Includes:
(1) TRA2981 EZ-Peak Plus 4S Multi-Chemistry Battery Charger
(1) TRA2890X 6700mAh 14.8V 4-cell 25C LiPo battery
This product was added to our catalog on May 15, 2021
TRA5352X, Traxxas Revo Slipper Clutch Rebuild Kit
This is a replacement slipper plate and slipper clutch shoes for the Traxxas Revo and T-Maxx monster trucks.
This product was added to our catalog on May 7, 2021
TRA3642X, Traxxas 3x12mm Shoulder Screws (Ultra Shocks) (6)
This is a pack of six replacement Traxxas 3x12mm Shoulder Screws. These are the screws used with Traxxas Ultra shocks.
This product was added to our catalog on September 7, 2021
1747G - Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
TRA1747G, NUTS 4MM FLANGED LOCK GREEN
This product was added to our catalog on September 7, 2021
