PHBPH9022, QS8-S Male / Female Plug / Connector Set (QS8.0mm-S)
This system guarantees constant charging of the capacitors on ESC and allows the battery to be connected without sparks on your ESC when you first plug in.
The design also provides no chance of incorrect polarity connection. Once soldered up, there are plastic guards that clip on each connector giving you a neatly wired plug and helps prevent short circuits.
These QS8-S heavy duty gold plated connectors with built-in antispark resistors are great for high power electric models equipped with TMM 40063-3 X2-SERIES or TMM 25063-3 X2-SERIES
Continuous Current: 110AMax Peak Current: 500AMAX Wire: 6AWGDiameter: 8.0mmGuaranteed Long Battery LifeMetal Material: Gold Plated BrassPlastic Material: Nylon with fiber
CSE011-0119-00, Castle Creations Castle Link V3 USB Programmer Adapter
The Castle Creations Castle Link contains a proprietary interface adapter and standard USB cable that will give you in depth access to the programmable parameters of your Castle Creations ESC. All you need is an available USB port on your PC.
Program your Castle brushless ESCs and accessories on your Windows® PC with the Castle Link USB programming kit.
Set up of programmable options with point and click ease
View your current program settings
Air users can customize values for low-voltage cutoff, prop brake strength, governor gain and more
Surface users can customize values for low-voltage cutoff, drag brake, torque limiting and more
Download new software updates as they become available
Simple programming interface featuring:
All-in-one support for all Phoenix, Talon, Thunderbird, QuadPack, DMR, Mamba, Sidewinder, and Hydra controllers, as well as accessories like Telemetry Link, as well as all of our external switching regulators (BECs).
Demo Mode allows users to check available settings without connecting their Castle device to the computer
Simple to install software
Expanded programming and parameters for all Castle ESCs
Set-up instructions:
Download the interface software.
Plug the Castle Link into the receiver lead on your controller and attach the mini USB cable included in the kit.
Connect the USB cable to your PC.
System Requirements: Castle Link is compatible with Windows Vista, Windows 7, Windows 8 and Windows 10.
Note: Macintosh users may take advantage of software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8 and Windows 10. to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations.
This product was added to our catalog on August 31, 2021
TRA2018, Traxxas 2018 Plastic Gear Standard Servo
This is a Traxxas 2018 Plastic Gear Standard Servo. This servo is used in a variety of Traxxas models, including the Villain EX boat, Stampede, Rustler, Jato, T-Maxx and Revo trucks, as well as the Nitro 4-Tec.
Specifications:
Length: 1.59"
Width: 0.77"
Height: 1.58"
Torque: 42.0 oz-in
Transit Time: 0.22 seconds/60°
Weight: 1.5 oz
This product was added to our catalog on May 7, 2021
TRA2065T, Traxxas Servo Sub-Micro Waterproof
The 2065T waterproof sub-micro servo features a metal main gear for precise control and powerful steering authority.
This product was added to our catalog on October 3, 2022
CEGG36791A, CEN #6 Angled Hood Pin Body Clip (10)
This is a replacement pack of ten CEN F450 #6 Angled Hood Pins, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck.
This product was added to our catalog on March 15, 2021
HADMCL4155, Maclan EC5 Connectors (4 Female)
Maclan EC5 Female Connectors. These are genuine EC5 connectors and are compatible with any application that uses a female EC5. Standard applications for the female connector recommend that the female end be installed in battery applications. Package includes four connector housings and eight female 5mm bullets.
This product was added to our catalog on September 28, 2021
HWA81030010, Hobbywing EZRun 18A Sensorless Brushless ESC/Motor Combo (18.0T/5200kV) w/Program Box
This is the Hobbywing EZRun 18A Sensorless Brushless ESC and Motor Combo, with an included Program Box. This combo combines an 18 Amp Brushless/Sensorless ESC with a 18.0 Turn, 5200kV Brushless/Sensorless Motor for an electronic package suitable for 1/18 and 1/16 scale on-road and off-road sport fun.
Features:
Compatible with sensorless brushless motors.
High quality components, big current endurance.
Excellent start-up, acceleration and linearity features.
Plenty of programmable items, suitable for various of chassis's, tires and racing tracks.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
Internal timing can be changed easily to make the ESC suitable for various of motors.
Easily programmed with the SET button, LED Program Box, Multifunction LCD Program Box and USB Link Software.
ESC firmware can be updated through the USB adapter in the LCD Program Box.
Top quality motor:
Aluminum shell (case)
High quality magnets
Copper wires of high temperature endurance
Good quality bearings
ESC Specifications:
Output: Continuous 18A, burst 50A.
Input: 4-9 cells NiMH/NiCd or 2-3S LiPo.
BEC: 6V/1A (Linear mode built-in BEC).
Resistance: 0.01 Ohm.
Motor Supported: Sensorless Brushless Motor.
Suitable Car: 1/18 on-road sport.
Cooling Fan: Not included.
Size: 31.5mm(L) * 27.5mm(W) * 15mm(H).
Weight: 19g (Without wires)
Motor Specifications:
kV: 5200
Motor Diameter: 20mm
Motor Length: 30
Shaft Diameter: 2mm
Shaft Length: 10mm
Weight: 46g
Programmer Specifications:
Size: 88x58x14mm
Weight: 40g
Input Weight: 4.8-6V
Includes:
EZRun 18A Brushless/Sensorless ESC
EZRun 2030 18.0T/5200kV Brushless/Sensorless Motor
LED Program Box
Note: The battery lead coming off the ESC uses a Mini Tamiya male plug. You will either need a battery with a Mini Tamiya female plug, or solder on new connectors.
This product was added to our catalog on May 4, 2023
ARA390292, Arrma IC5 Loop Connector - EC5 Compatible
This is the Arrma IC5 Loop Connector for use with models that use two IC5 or EC5 connectors, and using one battery is desired.
This ARRMA IC5 Loop Connector allows the use of a 4S or 6S LiPo battery pack in your ARRMA vehicle. It should be connected to one of the ESC-to-battery plugs when using a single 4S or 6S battery.
The IC5 connector provides a reliable, efficient connection between the ESC and battery.
This product was added to our catalog on June 19, 2021
HADMCL4156, Maclan EC5 Connectors (4 Male)
Maclan EC5 Male Connectors. These are genuine EC5 connectors and are compatible with any application that uses a female EC5. Standard applications for the male connector recommend that the male end be used in ESC or battery charger applications. Package includes four connector housings and eight male 5mm bullets.
This product was added to our catalog on October 3, 2021
TRA3018R, Traxxas XL-5 Waterproof ESC w/Low Voltage Detection
This is the Traxxas XL-5 Waterproof ESC. Designed and engineered by Traxxas, the XL-5 Electronic Speed Control handles the elements while smoothly supplying power to the motor. This high-performance ESC is packed with impressive specifications that are normally only found on more expensive high-end replacement units. The XL-5 features a completely waterproof design, three throttle profiles, Thermal Shutdown Protection, 4-8 cell compatibility, and built-in BEC. High frequency operation combined with ultra-low resistance make the XL-5 an efficient and ultra-smooth fully proportional speed control. An exclusive feature on the XL-5 is the patent pending Training Mode™. This profile reduces the overall power output of the XL-5 by 50% making it easier for young or new drivers to develop their control skills before unleashing full-power operation. The XL-5 is manufactured by Traxxas to ensure the highest level of quality and support. The XL-5 is backed by the Traxxas Lifetime Electronics Warranty.
Traxxas High-Current Connector:
The XL-5 ESC is equipped with the Traxxas high-current connectors for restriction-free current flow.
Patent-Pending Training Mode:
An exclusive feature that places the XL-5 ahead of the pack is the patent pending Training Mode. This feature reduces the overall power output of the XL-5 by 50% making it easier for new drivers to control their model. When they’re ready, simply change profiles to unleash full-throttle action. Only Traxxas has it!
XL-5 Waterproof ESC Features:
Innovative water sealed design
15-turn motor limit for 540 size motors
12-turn motor limit for 550 size motors
Fully-proportional forward, reverse, and braking control
Programmable with three drive profiles:
Sport Mode – Fwd / Brake / Rev
Race Mode – Fwd / Brake
Training Mode – 50% Fwd / Brake / 50% Rev
EZ-Set® push-button setup
Multi-color LED
Thermal shutdown protection
Efficient, low-loss MOSFET design
High-capacity heat sink
Smooth, high-frequency operation
Easy installation in Traxxas models
Backed by the Traxxas Lifetime Electronics warranty
XL-5 (WATERSEALED) ESC Specifications:
Input voltage: 4-7 Cells NIMH or 2S LiPo
Case Size: 1.23"W x 2.18"D x 0.61" H
Weight: 2.44 Ounce
Motor Limit:
15-turns** (540 Size)
12-turns** (550 Size)
On Resistance Forward: 0.007 Ohms
On Resistance Reverse: 0.014 Ohms
Peak Current - Forward: 100A
Peak Current - Reverse: 60A
Braking Current: 60A
Continuous Current: 14A
BEC Voltage: 6.0 VDC
BEC Current: 1A
Power Wire: 14 Gauge / 5"
Input Harness Wire: 26 Gauge / 9"
Transistor Type: MOSFET
PWM Frequency: 1600 Hz
Thermal Protection: Thermal shutdown
Profile selection:
Sport Mode: 100% FWD, 100% brakes, 100% REV
Race Mode: 100% FWD, 100% brakes, no REV
Training Mode: 50% FWD, 100% brakes, 50% REV
Single-button setup: Yes, Traxxas EZ-Set®
**NOTE: When properly geared
This product was added to our catalog on September 7, 2021
PTK-5071, ProTek RC QS8 Anti-Spark Connector (1 Male)
ProTek RC QS8 Anti-Spark Connectors are a high quality, high current connector that is perfect for high voltage applications. Not only is the connector capable of handling spikes in excess of 300 amps, the design provides an anti-spark connection that eliminates the dreaded POP when you plug in the battery helping to extend the life of the connector. High voltage bashers, speed run enthusiasts and pilots of all disciplines can benefit from this advanced connector technology.The QS8 connector features 8mm bullets that can accommodate wire up to 6awg, inside a heavy duty nylon/fiber composite housing. Plus, an included plastic wire cap covers the soldered connection and eliminates the need for heat shrink to create an incredibly clean installation that works well, looks great and is easy to manage. NOTE: T-style connector shown in photos is for size reference only, and is not included.
Features:
Anti-Spark Technology Increases Lifespan of Connector
110A Constant/300A Peak Current Rating
8.0mm Gold Plated Brass Bullet
Great for all High Voltage Applications
Nylon/Fiber Composite Housing
Package Includes One Male Connector & Wire Cap
Specifications:
Connector Diameter: 8.00mm
Metal Material: Gold Plated Brass
Plastic Material: Fiber Nylon
Flame retardant rating: UL94 V2
Temperature Range: -20C to +100C
Rated Voltage: 600V DC
Continuous Current: 110A
Peak Current: 300A
Weight: 20g ea (40g Male+Female Set)
Length: 35.9mm w/end capWidth:
Width: 29.5mm
Total Length When Connected: Approx 70mm (Male & Female w/End Cap)
Max Wire Gauge: 6awg
Includes:
(1) QS8 Male Anti-Spark Connector
(1) Wire Cap
This product was added to our catalog on March 24, 2021
PTK-5041, ProTek RC Sheathed T-Style (Deans) Plug (1 Male/1 Female)
These ProTek R/C Sheathed T-Style Connectors are compatible with any standard generic T-Style plug, as well as Deans Ultra Plugs. These connectors feature a plastic protective sheath that snap onto the back of the connector concealing the solder joint.
Typical t-style plugs use shrink tubing which works fine, but provides a one-time solution. Using the sheath, you can snap it on or off to make any connector changes or modification, as well as create a sleek and professional look.
Package includes one male plug, one female plug and two protective sheaths.
Features:
T-Style connectors
60A max current
Sheathed backing
Concealed solder joint
Labeled polarity
Professional looks
Specifications:
Rated Current： 36A
Max Current: 60A
Internal Resistance: 0.4mΩ
Net Weight (pair): 5.6g
Recommended Wire: 12AWG
Pulling Force: 25N
Recommended Use: 1000 times
Rated Temperature： -20°C - 120°C (-4°F - 248°F)
Material： Brass and gold plated
This product was added to our catalog on March 16, 2021
DYNC0030, Dynamite EC5 to EC3 Connector Adapter (EC5 Female to EC3 Male)
This is a Dynamite EC5 Female to EC3 Male connector adapter. It adapts an EC5 device to accept an EC3 battery.
For the reverse adapter, see part EFLAEC509.
This product was added to our catalog on March 13, 2021
SPMXCA505, Spektrum RC IC5 4" Battery Connector
This is a Spektrum IC5 4" Battery Connector. This connector uses a Female IC5 plug and 10AWG, 4" long wire.
This product was added to our catalog on March 31, 2021
SPMXCA501, Spektrum RC IC5 Battery Connector (2) (Female)
This is a pack of Spektrum IC5 Battery Connectors, including two female IC5 plugs.
This product was added to our catalog on March 31, 2021
SPMXCA317, Spektrum RC IC3 Battery Adaptor Plug (Device to Deans) (2)
The IC3 Battery Adaptor Plug from Device to Deans style adapter. These are used to convert IC3 or EC3 equipped batteries to be used with applications that require a Deans connector. Package includes two adapter plugs.
This product was added to our catalog on May 14, 2021
TRA3465, Traxxas Velineon VXL-4S Brushless Electronic Speed Control
Traxxas Velineon VXL-4S Brushless Electronic Speed Control. This ESC is a replacement for the Traxxas Maxx Monster Truck.
Specifications:
Input Voltage: 3S–4S LiPo (11.1V – 16.8V)
Case Size: 2.83 inches (72mm) x 2.32 inches (59mm) x 1.93 inches (49mm)
Weight: 201g (7.09oz)
BEC Voltage: 6.0 V
BEC Current Continuous: 10 A
BEC Current Peak: 20 A
Motor Connectors: Traxxas 6.5mm bullet connectors
Battery Connectors: Traxxas High-Current Connectors
Power Wire: 10-gauge Maxx Cable
Ports: RX input, auxiliary fan, Traxxas accessory port
This product was added to our catalog on May 2, 2021
PTK-5059, ProTek RC EC2 Connector (1 Male/1 Female)
Protek R/C EC2 Connectors. Package includes one male, and one female connector housing, with male and female bullets.
This product was added to our catalog on December 16, 2021
DYNC0142, Dynamite Battery Adapter (EC3 Male to XT60 Female)
Dynamite XT60 Female to EC3 Male style adapter. This adapter features a male EC3 (device side) and female XT60 (battery side). This allows you to use a battery with an EC3 on a model with an XT60 plug on the ESC. This is can also be used as a charge cable adapter to connect an EC3 equipped battery to a charger with an XT60.
This product was added to our catalog on May 12, 2021
SPMXCA303, Spektrum RC IC3 Device Connector (2) (Male)
Spektrum IC3 Device Connector Set, including two Male IC3 connectors.
This product was added to our catalog on December 31, 2021
MCL4115, Maclan XT90 Connector (3 Female/3 Male) (Yellow)
Maclan XT90 Connector Set. Package includes three male and three female XT90 Connectors.
Features:
Authentic XT90 connectors
This product was added to our catalog on April 30, 2021
2250 - Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof
TRA2250, SERVO 330 HIGH TORQUE CORELESS
This product was added to our catalog on September 7, 2021
PTK-130T, ProTek RC 130T Standard Digital "High Torque" Metal Gear Servo (High Voltage)
This is the ProTek R/C 130T Digital Hi-Torque Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.
The ProTek R/C 130T High Voltage Hi-Torque servo delivers an incredible 288 oz-in of torque with a 0.10 transit speed at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 355 oz-in and 0.08! Spec's like these make this servo an excellent choice for any 1/10 to 1/8 scale vehicle application. Other features include a full metal gear train that is supported by dual ball bearings, a 200mm long 22awg connector wire with gold plated connectors, a coreless motor and an aluminum middle case that helps to dissipate heat and helps to increase efficiency.
Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.
Warning! This ProTek R/C servo requires that you use a m3x10mm screw to attach the servo horn to the output shaft. If you choose to use another screw, be sure to use a 10mm length screw. Use of a shorter screw can cause failure and will void your warranty.
Features:
Ideal for any 1/10 to 1/8 scale vehicle application
Aluminum middle case
High voltage circuitry
0.10 transit speed, and 288 oz-in of torque @ 6.0V
0.08 transit speed, and 355 oz-in of torque @ 7.4V
Aluminum single arm servo horn
Full metal gears and dual ball bearings
200mm long 22awg connector wire w/gold plated connectors
Coreless motor
Servo Model
130T
Recommended Application
1/10 to 1/8 scale surface
Operating Voltage
4.8V - 7.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.10/60° sec
Operating Speed @ 7.4V
0.08/60° sec
Dynamic Torque @ 6.0V
288 oz-in (20.7 kg-cm)
Dynamic Torque @ 7.4V
355 oz-in (25.6 kg-cm)
Motor Type
High Efficiency Coreless Motor
Output Shaft
25 Tooth
Gears
Metal
Weight
61g
Pulse/Frequency
1520?s / 333hz
This product was added to our catalog on December 16, 2021
TRA8527, Connector, 25.2 volt to 14.8 volt jumper (allows a Traxxas dual-battery 25.2V ESC to run on a single 14.8V battery pack)
This product was added to our catalog on May 7, 2021
