TRA3785, Traxxas Titan 550 Size Motor (12T)
The Titan 12T 550 modified motor is designed for incredible mod-motor power output with virtually maintenance-free operation, and long-lasting performance. The Titan 12T 550 motor’s integrated cooling fan pulls cool air through the motor to keep temperatures down. A cooler running motor allows faster speeds, longer runtime, and extended motor life.
NOTE: Titan 12T motors are intended for use in single motor and single battery pack applications, up to 8.4 volts. Traxxas does not recommend the use of Titan 12T motors in dual motor vehicles, such as the E-Maxx.
Replacement part for these models:
1/16 E-Revo
1/16 Slash 4WD
1/16 Summit
4-Tec 2.0 AWD Chassis
Bandit
BIGFOOT
Chevrolet Corvette Stingray
Factory Five '33 Hot Rod
Ford F-150 Raptor
Ford Fiesta ST Rally
Ford GT
Rustler
Slash
Stampede
Toyota GR Supra GT4
This product was added to our catalog on September 7, 2021
TRA7575R, Traxxas LaTrax 370 Motor w/Bullet Connectors
Fits:
LaTrax 1/18 Rally
LaTrax 1/18 SST
This product was added to our catalog on September 7, 2021
TRA2075, Traxxas 2075 Digital High Torque Waterproof Servo
This is a replacement Traxxas Digital High Torque Waterproof Servo.
Specifications:
Torque: 125 oz-in
Speed: 0.17 sec/60°
This product was added to our catalog on April 20, 2021
TRA6814, Traxxas VXL-3S Velineon Brushless Power System Combo (Waterproof)
The next generation of extreme brushless horsepower is here, Ready-To-Race® from Traxxas—and now waterproof! Velineon™ is the ultimate brushless system delivering the tire melting horsepower, supercharged speeds, and ease of use that you expect from Traxxas. Just plug it in and it works.
The key to the Velineon’s extreme power output is total system optimization. Each component, from the Traxxas high-current battery connector, to the powerful Velineon 3500 brushless motor, is carefully engineered to work with other system components to eliminate restriction and allow maximum power flow. High-frequency transistors and advanced circuit design delivers incredibly smooth and refined throttle control. The Velineon system accepts the widest range of battery types, including 3-cell Lithium Polymer packs (3S LiPo packs). Built-in low-voltage detection in the VXL-3s electronic speed control helps keep LiPo battery packs in top condition.
Traxxas’ exclusive waterproof technology allows the Velineon system to operate in wet conditions, including mud and snow, with no special precautions required. You decide where the Velineon powered adventure leads—the only limits are your imagination.
Key Features:
Now Waterproof
Compatible with brushed, brushless and sensored brushless motors
Auto-detects the motor type
Accepts NiCad, NiMH (4-10 cells), and LiPo (2-3cells) battery packs
Built-in-two-stage low-voltage detection for LiPo battery packs
3 drive profiles:Sport Mode, Race Mode, and Training Mode
Two-Stage Thermal shutdown protection
Velineon 3500 Brushless Motor
10-Turn, 3500kV
Optimized for extreme power and efficiency in 1/10 vehicles
This product was added to our catalog on May 7, 2021
TRA2075R, Traxxas Digital High Speed Waterproof Servo
The digital 2075R High-Speed Metal Gear Servo features a waterproof case for worry-free driving in water, mud, or snow. Ball bearings increase steering precision with the superior durability of all-metal gears for the ultimate driving experience.
This product was added to our catalog on September 7, 2021
TRA2075X, Traxxas 2075X High Torque Metal Gear Waterproof Digital Servo
This is a replacement Traxxas 2075X Digital High Torque Metal Gear Waterproof Servo. This servo is included with the TRX4 as standard equipment.
Features:
Metal Gear, Ball Bearing
Digital High-torque 125 oz-in.
Transit Time .17 sec/60°
L=55mm, H= 42.75mm, W=21.5mm
Fits:
Traxxas 4-Tec 3.0
Traxxas Drag Slash
Traxxas E-Revo VXL 2.0
Traxxas Hoss
Traxxas Rustler 4x4
Traxxas TRX-4
Traxxas TRX-4
Traxxas Unlimited Desert Racer
This product was added to our catalog on April 14, 2021
TRA3351R, Traxxas Velineon 3500 Brushless Motor (10T/3500kV)
This is the Traxxas Velineon 3500 Brushless Motor. The Velineon 3500 Brushless Motor features a precision balanced rotor, high-speed ball bearings, and ultra high-temperature Neodymium magnets for a great blend of power and long-life. The Velineon 3500 delivers consistent, high-power output, run after run.
Features:
Ultra high-temperature sintered Neodymium magnets provide
massive torque and linear power
Optimized for power and efficiency in 1/10th scale vehicles
Consistent, high-power output, run after run
Low-maintenance, unique Traxxas design
Efficient, high-speed ball bearings
Low maintenance design
Precision-balanced rotor
Protective end cap
10-Turn, 3500Kv
Rebuildable
Hex hardware
Brilliant blue-anodizing finish
Silicon steel laminations
Delivers more power than comparable brushed motors
Note: The motor is not compatible with the older TRA3355X ESC. It must be used with the newer TRA3355R ESC.
This product was added to our catalog on May 8, 2021
TRA3070X, Traxxas TRX Device Connector (2 Male)
Traxxas TRX Device Connector. Package includes two replacement connectors intended for Traxxas ESC's. NOTE: These connectors should only be used as replacement connectors for a Traxxas ESC.
This product was added to our catalog on May 7, 2021
TRA3064X, Traxxas Parallel Battery Wire Harness (Traxxas ID)
Traxxas Parallel Battery Wire Harness. Use the parallel harness to combine battery capacity and get extra long runtimes of your model. Dual-battery operation requires attention to precautions outlined in the model's owners manual. Follow all precautions to assure peak performance and reliability of your model and batteries.
Traxxas parallel and series Y-harnesses are for use with 2/3A battery packs only.
This product was added to our catalog on September 7, 2021
PTK-5211, ProTek RC Heavy Duty 15cm Universal Servo Y Extension Lead (1 Male/2 Female)
This is one 15cm (6") universal servo Y extension lead from ProTek R/C. These are excellent servo extension leads made with thick, high quality 22awg wire for maximum current carrying capacity and strength.
The male plug installed on these extension leads are JR style connectors and will work with any radio system. The two female ends are designed to accept Futaba connectors, as well as JR, Aitronics and HiTec connectors. When plugging JR style connectors into the female connector, be sure to check for the correct polarity.
This product was added to our catalog on December 16, 2021
TRA2085X, Traxxas X-Maxx/XRT/Maxx Waterproof Digital High-Torque Servo
This is the Traxxas X-Maxx/XRT Waterproof Digital High-Torque Servo. This metal gear (ball bearing) waterproof servo also includes the servo saver spring and assembled steering link.
The X-Maxx steering servo includes full metal gears and adds a massive 23% more torque to take on the most extreme environments. The kit also includes a stiffer servo saver spring and steel steering linkage for increased precision and control during high speed driving.
Accessory part for these models:
Traxxas Maxx
Traxxas X-Maxx
Traxxas XRT
This product was added to our catalog on May 7, 2021
TRA2046, Traxxas Servo connector, Y adapter (for dual-servo steering)
The Y-adapter allows you to connect two servos to a single receiver port for trucks with dual-servo steering.
This product was added to our catalog on May 7, 2021
TRA3975R, Traxxas TRX-4 Titan 550 Reverse Rotation Motor (21T)
The Titan 550 is a 21-turn fan-cooled 550 size motor capable of handling 14.4 volts. This powerful motor has a 30% longer armature than a standard 540 size motor for extreme monster torque.
Key Features:
21 turn/ 14V
fan-cooled
30% longer armature
This product was added to our catalog on September 7, 2021
TRA1844, Traxxas Large Servo Saver
This is a large servo saver from Traxxas. This servo saver mounts to the servo, and provides protection for your steering servo by allowing flex in the steering linkage during a crash.
This product was added to our catalog on September 7, 2021
TRA3355R, Traxxas VXL-3S Brushless ESC (Waterproof)
This is the Traxxas VXL-3S Brushless Electronic Speed Control. This Speed Control simplifies brushless technology with easy, built-in profiles and intuitive programming. Tri-mode operation auto detects the motor type for brushed, sensored, or sensorless brushless motors. The VXL-3s uses advanced circuit design that allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. It sets up, operates, and programs just like the Traxxas XL-5 family of ESCs so there's no tricky new procedures to learn. Traxxas exclusive patented Training Mode is also included to limit full throttle to 50% for young or inexperienced drivers. For the most advanced users, the VXL-3s is equipped with two-stage low voltage detection to allow LiPo battery use. The VXL-3s is manufactured by Traxxas to ensure the highest level of quality and support and is backed by the Traxxas Lifetime Electronics Warranty.
Features:
The VXL-3s auto-detects the motor type for brushless and sensored brushless motors.
Patented Traxxas High-Current Connector eliminates a common bottleneck and maintains pure, unrestricted power flow from the battery to the brushless power system.
Built-in two-stage low voltage detection for Lithium Polymer (LiPo) battery use provides a clear signal to the driver that the battery pack is nearing its minimum voltage threshold.
Widest range of battery options ranging from 4-cell NiMH or NiCad packs all the way up to 3S LiPo battery packs (11.1 volt)
The patented Training Mode™ is an exclusive Traxxas feature that reduces the overall power output of the VXL-3s by 50%, making it easier for new or younger drivers to control their model. When they're ready, simply change profiles to unleash full-throttle action.
Advanced circuit design allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. There's no need for additional sensor wiring and hardware complexity.
The EZ-Set® push-button setup operates and programs just like other Traxxas speed controls such as the XL-5. This eliminates the need to learn a new set of procedures.
The VXL-3s is programmable with three drive profiles:
Sport Mode – Fwd / Brake / Rev
Race Mode – Fwd / Brake
Training Mode**™ – 50% Fwd / Brake / 50% Rev
More Features:
Multi-color LED provides clear feedback
Since the VXL-3s allows experimentation with many kinds of motors, it is equipped with numerous failsafe features to help protect against common mishaps that can cause other systems to fail.
Two-stage thermal shutdown protection protects the VXL-3s from overheating.
Locked Rotor Protection™ prevents system damage by cutting power if the vehicle is stuck or the motor is bound.
Sensor Phase Detection™ protects against improperly wiring aftermarket sensored motors.
Sensored Motor Backup protection causes the VXL-3s to switch to sensorless operation if a motor sensor fails or sensor wires become disconnected. Sensored motors can be used without connecting the sensor wires to the sensor port on the ESC.
Battery Over-Voltage Protection™ causes the ESC to go into failsafe mode if the maximum input voltage is exceeded.
Water resistant case design uses rubber seals and o-rings to protect against damage caused by water and moisture.
Micro-fin aluminum heatsink dissipates heat.
The built-in auxiliary fan output powers a snap-on accessory fan for increased cooling capacity during extreme use. A handy clasp on the speed control case keeps the wire neatly in place until you are ready to use it.
MOSFET design provides high-current output (320 amp peak) with incredibly low resistance (.00075 (ohm)).
Gold plated 3.5mm bullet connectors on 12-gauge Maxx® Cable flow full power to the motor without performance strangling resistance.
Specifications:
Input Voltage: NiCad/NiMH 4-9 Cells (4.8 to 10.8 Volts DC);
LiPo 2-3 Cells: (7.4 to 11.1 Volts DC)
Case Size: 39mmW x 55mmD x 33mmH
Weight: 90 grams
Motor Limit (Brushed/Brushless): No motor limit
On Resistance Forward: 0.00075 Ohms
On Resistance Reverse: 0.00075 Ohms
Peak Current - Forward: 320A
Peak Current - Reverse: 320A
Braking Current: 320A
Continuous Current: 200A
BEC Voltage: 6.0 V
BEC Current: 2.5A (with 6-cell NiMH)
Power Wire: 12-Gauge Maxx® Cable
Input Harness Wire: 26 Gauge / 100mm
Transistor Type: MOSFET
Low Voltage Detection: 2-Stage indicators, switchable (on or off)
Thermal Protection: 2-Stage thermal shutdown
Single-Button Setup: Yes, Traxxas EZ-Set®
Battery Input Connector : Traxxas High-Current Connector
Motor Types (Autodetect): Brushed, brushless, sensored brushless
Ports: RX Input, motor sensor, auxiliary fan
Documents and Resources for TRA3355R
Traxxas VXL-3S Waterproof ESC Manual
This product was added to our catalog on April 12, 2021
SAVSH0263MGP, Savox SH-0263MGP Micro Metal Gear Digital Servo
The Savox SH-0263MGP Metal Gear Digital Micro Servo is quick and built tough. It's small size and superb overall performance makes this servo ideal for applications such as 450 size helicopters.
NOTE: "Plus" models feature Soft Start and Sanwa SSR Compatibility
Features:
Metal gear train ensures durability and longevity.
Aluminum middle case allows for cooler operating temperatures.
Ideal for small planes, and 450 size helicopters.
Dual ball bearing support.
Specifications:
Torque:
@4.8v: 1.8kg/25.0oz-in
@6.0v: 2.2kg/30.6oz-in
Speed:
@4.8v: 0.13 sec/60 deg
@6.0v: 0.10 sec/60 deg
Dimensions (LxWxH) 22.8 x 12.0 x 25.4mm
Weight: 15.0g
Includes:
(1) SH-0263MGP Micro Metal Gear Digital Servo
Plastic Servo Arms and Hardware
This product was added to our catalog on March 23, 2023
PTK-5042, ProTek RC Sheathed T-Style Plug (2 Male)
These ProTek R/C Sheathed T-Style Connectors are compatible with any standard generic T-Style plug, as well as Deans Ultra Plugs. These connectors feature a plastic protective sheath that snap onto the back of the connector concealing the solder joint.
Typical t-style plugs use shrink tubing which works fine, but provides a one-time solution. Using the sheath, you can snap it on or off to make any connector changes or modification, as well as create a sleek and professional look.
Package includes two male plugs and two protective sheaths.
Features:
T-Style connectors
60A max current
Sheathed backing
Concealed solder joint
Labeled polarity
Professional looks
Specifications:
Rated Current： 36A
Max Current: 60A
Internal Resistance: 0.4mΩ
Net Weight (pair): 5.6g
Recommended Wire: 12AWG
Pulling Force: 25N
Recommended Use: 1000 times
Rated Temperature： -20°C - 120°C (-4°F - 248°F)
Material： Brass and gold plated
This product was added to our catalog on December 16, 2021
SPMXCA508, Spektrum RC 4" IC5 Battery to IC3 Device SMART Battery Adapter Cable
The Spektrum 4" IC5 Battery to IC3 Device SMART Battery Adapter Cable allows you to connect batteries with an IC3 or EC3 connector to an IC5 connector equipped Spektrum Smart device. This adapter features a male bullet/female housing IC3 connector, combined with a female bullet/male housing IC5 connector, that is joined with 4"/100mm long 12awg wire.
This product was added to our catalog on May 31, 2021
SPMXCA503, Spektrum RC IC5 Device Connector (2) (Male)
Spektrum IC5 Device Connectors, including two Male IC5 Connectors.
This product was added to our catalog on December 31, 2021
TRA3070R, Traxxas 4S Male ESC Connector
Traxxas 4S Male ESC Connector. This optional connector is designed to allow for single 4S LiPo compatibility to the Traxxas VXL-6S ESC. Package includes two connectors and four terminals.NOTE:
This is for Traxxas ESC use ONLY.
Requires Traxxas TRA8527 jumper for unused battery lead.
This product was added to our catalog on September 7, 2021
PTK-5070, ProTek RC QS8 Anti-Spark Connector (1 Male/1 Female)
ProTek RC QS8 Anti-Spark Connectors are a high quality, high current connector that is perfect for high voltage applications. Not only is the connector capable of handling spikes in excess of 300 amps, the design provides an anti-spark connection that eliminates the dreaded POP when you plug in the battery helping to extend the life of the connector. High voltage bashers, speed run enthusiasts and pilots of all disciplines can benefit from this advanced connector technology.
The QS8 connector features 8mm bullets that can accommodate wire up to 6awg, inside a heavy duty nylon/fiber composite housing. Plus, an included plastic wire cap covers the soldered connection and eliminates the need for heat shrink to create an incredibly clean installation that works well, looks great and is easy to manage. NOTE: T-style connector shown in photos is for size reference only, and is not included.
Features:
Anti-Spark Technology Increases Lifespan of Connector
110A Constant/300A Peak Current Rating
8.0mm Gold Plated Brass Bullet
Great for all High Voltage Applications
Nylon/Fiber Composite Housing
Package Includes One Female Connector, One Male Connector & End Cap
Specifications:
Connector Diameter: 8.00mm
Metal Material: Gold Plated Brass
Plastic Material: Fiber Nylon Comp
Flame retardant rating: UL94 V0
Temperature Range: 200C Max
Rated Voltage: 600V DC
Continuous Current: 110A
Peak Current: 300A+
Weight: 41g (Male+Female Set)
Total Length: Approx 70mm (Male & Female w/End Cap)
Width: 29.5mm
Max Wire Gauge: 6awg
Includes:
(1) QS8 Female Anti-Spark Connector
(1) QS8 Male Antispark connector
(2) Wire Caps
NOTE: T-style connector shown in photos is for size reference only, and is not included.
This product was added to our catalog on December 16, 2021
TRA8247X, Traxxas TRX-4 Metal Steering Servo Horn
Traxxas TRX-4 Metal Steering Servo Horn. This is the optional sintered metal servo horn. Package includes one horn and one 3x14 button head screw.
This servo horn is compatible with any standard servo featuring a 25 tooth spline.
This product was added to our catalog on September 7, 2021
TRA3478, Traxxas Sledge Cooling Fan Wiring Harness
Traxxas Sledge Cooling Fan Wiring Harness. This replacement wiring harness is intended for the Traxxas Sledge equipped with the TRA3475 Cooling Fan. Package includes one wiring harness and one zip-tie.
This product was added to our catalog on August 1, 2022
PTK-5350, ProTek RC Heavy Duty EC5 Charge Lead Adapter (Male EC5 to Female XT60)
The ProTek R/C Heavy Duty EC5 Charge Lead Adapter features a "male" EC5 connector with male bullets, connected to a female XT60. Thanks to the 4 inch long 14awg wire, this adapter can be used for heavy duty charging and can handle charge rates more than 20 amps. This adapter can also be used for ESC to battery connections in some applications, allowing you to connect your EC5 equipped battery to an ESC with an XT60.
This product was added to our catalog on December 16, 2021
HWA30112003, Hobbywing Xerun XR10 Justock G3 1/10 Sensored Brushless ESC
The Hobbywing XERUN XR10 Justock G3 1/10 Sensored Brushless ESC is the next level in zero timing spec racing. The timing in this ESC has been fixed to a permanent 0° to comply with stock class racing. Package includes one Justock ESC.
Features:
Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system
Programmable via OTA Bluetooth module or 3in1 program box
Built-in capacitor module eliminates the need for external capacitors and unwanted space
RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box)
Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing
Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V
Calibration or preforming a factory-reset can be achieved by using this SET button. Simple and easy to use
Supports both CCW (counterclockwise) and CW (clockwise) motor directions
Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection
Supports ESC firmware upgrades
User-friendly and convenient for set-up
Specifications:
Continuous Current: 60A
Burst Current: 380A
Battery: 2S Lipo (Only 2S)
Built-in BEC: 6V/7.4V @ 4A(Switch-mode)
ESC programming: Independent programming port
Motor Supported: Sensor and sensorless brushless motor
Motor Limit: 10.5T 3650 Motor
Application: 1/10, 1/12 On-road and Off-road
Cooling Fan: Powered by BEC
Size: 40.9x33.9x32.1mm (LxWxH)
Weight: 75.4g (Including weight of wire)
This product was added to our catalog on May 3, 2023
TRA3063X, Traxxas Series Battery Wire Harness (NiMH Only)
Traxxas Series Battery Wire Harness. Use the series harness to combine battery voltage and unlock the 50+mph speed potential of your model. Dual-battery operation requires attention to precautions outlined in the model's owners manual. Follow all precautions to assure peak performance and reliability of your model and batteries. Traxxas parallel and series Y-harnesses are for use with 2/3A battery packs only.
This product was added to our catalog on May 7, 2021
PHBPH9022, QS8-S Male / Female Plug / Connector Set (QS8.0mm-S)
This system guarantees constant charging of the capacitors on ESC and allows the battery to be connected without sparks on your ESC when you first plug in.
The design also provides no chance of incorrect polarity connection. Once soldered up, there are plastic guards that clip on each connector giving you a neatly wired plug and helps prevent short circuits.
These QS8-S heavy duty gold plated connectors with built-in antispark resistors are great for high power electric models equipped with TMM 40063-3 X2-SERIES or TMM 25063-3 X2-SERIES
Continuous Current: 110AMax Peak Current: 500AMAX Wire: 6AWGDiameter: 8.0mmGuaranteed Long Battery LifeMetal Material: Gold Plated BrassPlastic Material: Nylon with fiber
CSE011-0119-00, Castle Creations Castle Link V3 USB Programmer Adapter
The Castle Creations Castle Link contains a proprietary interface adapter and standard USB cable that will give you in depth access to the programmable parameters of your Castle Creations ESC. All you need is an available USB port on your PC.
Program your Castle brushless ESCs and accessories on your Windows® PC with the Castle Link USB programming kit.
Set up of programmable options with point and click ease
View your current program settings
Air users can customize values for low-voltage cutoff, prop brake strength, governor gain and more
Surface users can customize values for low-voltage cutoff, drag brake, torque limiting and more
Download new software updates as they become available
Simple programming interface featuring:
All-in-one support for all Phoenix, Talon, Thunderbird, QuadPack, DMR, Mamba, Sidewinder, and Hydra controllers, as well as accessories like Telemetry Link, as well as all of our external switching regulators (BECs).
Demo Mode allows users to check available settings without connecting their Castle device to the computer
Simple to install software
Expanded programming and parameters for all Castle ESCs
Set-up instructions:
Download the interface software.
Plug the Castle Link into the receiver lead on your controller and attach the mini USB cable included in the kit.
Connect the USB cable to your PC.
System Requirements: Castle Link is compatible with Windows Vista, Windows 7, Windows 8 and Windows 10.
Note: Macintosh users may take advantage of software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8 and Windows 10. to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations.
This product was added to our catalog on August 31, 2021
TRA2018, Traxxas 2018 Plastic Gear Standard Servo
This is a Traxxas 2018 Plastic Gear Standard Servo. This servo is used in a variety of Traxxas models, including the Villain EX boat, Stampede, Rustler, Jato, T-Maxx and Revo trucks, as well as the Nitro 4-Tec.
Specifications:
Length: 1.59"
Width: 0.77"
Height: 1.58"
Torque: 42.0 oz-in
Transit Time: 0.22 seconds/60°
Weight: 1.5 oz
This product was added to our catalog on May 7, 2021
TRA2065T, Traxxas Servo Sub-Micro Waterproof
The 2065T waterproof sub-micro servo features a metal main gear for precise control and powerful steering authority.
This product was added to our catalog on October 3, 2022
CEGG36791A, CEN #6 Angled Hood Pin Body Clip (10)
This is a replacement pack of ten CEN F450 #6 Angled Hood Pins, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck.
This product was added to our catalog on March 15, 2021
ARA390292, Arrma IC5 Loop Connector - EC5 Compatible
This is the Arrma IC5 Loop Connector for use with models that use two IC5 or EC5 connectors, and using one battery is desired.
This ARRMA IC5 Loop Connector allows the use of a 4S or 6S LiPo battery pack in your ARRMA vehicle. It should be connected to one of the ESC-to-battery plugs when using a single 4S or 6S battery.
The IC5 connector provides a reliable, efficient connection between the ESC and battery.
This product was added to our catalog on June 19, 2021
TRA3018R, Traxxas XL-5 Waterproof ESC w/Low Voltage Detection
This is the Traxxas XL-5 Waterproof ESC. Designed and engineered by Traxxas, the XL-5 Electronic Speed Control handles the elements while smoothly supplying power to the motor. This high-performance ESC is packed with impressive specifications that are normally only found on more expensive high-end replacement units. The XL-5 features a completely waterproof design, three throttle profiles, Thermal Shutdown Protection, 4-8 cell compatibility, and built-in BEC. High frequency operation combined with ultra-low resistance make the XL-5 an efficient and ultra-smooth fully proportional speed control. An exclusive feature on the XL-5 is the patent pending Training Mode™. This profile reduces the overall power output of the XL-5 by 50% making it easier for young or new drivers to develop their control skills before unleashing full-power operation. The XL-5 is manufactured by Traxxas to ensure the highest level of quality and support. The XL-5 is backed by the Traxxas Lifetime Electronics Warranty.
Traxxas High-Current Connector:
The XL-5 ESC is equipped with the Traxxas high-current connectors for restriction-free current flow.
Patent-Pending Training Mode:
An exclusive feature that places the XL-5 ahead of the pack is the patent pending Training Mode. This feature reduces the overall power output of the XL-5 by 50% making it easier for new drivers to control their model. When they’re ready, simply change profiles to unleash full-throttle action. Only Traxxas has it!
XL-5 Waterproof ESC Features:
Innovative water sealed design
15-turn motor limit for 540 size motors
12-turn motor limit for 550 size motors
Fully-proportional forward, reverse, and braking control
Programmable with three drive profiles:
Sport Mode – Fwd / Brake / Rev
Race Mode – Fwd / Brake
Training Mode – 50% Fwd / Brake / 50% Rev
EZ-Set® push-button setup
Multi-color LED
Thermal shutdown protection
Efficient, low-loss MOSFET design
High-capacity heat sink
Smooth, high-frequency operation
Easy installation in Traxxas models
Backed by the Traxxas Lifetime Electronics warranty
XL-5 (WATERSEALED) ESC Specifications:
Input voltage: 4-7 Cells NIMH or 2S LiPo
Case Size: 1.23"W x 2.18"D x 0.61" H
Weight: 2.44 Ounce
Motor Limit:
15-turns** (540 Size)
12-turns** (550 Size)
On Resistance Forward: 0.007 Ohms
On Resistance Reverse: 0.014 Ohms
Peak Current - Forward: 100A
Peak Current - Reverse: 60A
Braking Current: 60A
Continuous Current: 14A
BEC Voltage: 6.0 VDC
BEC Current: 1A
Power Wire: 14 Gauge / 5"
Input Harness Wire: 26 Gauge / 9"
Transistor Type: MOSFET
PWM Frequency: 1600 Hz
Thermal Protection: Thermal shutdown
Profile selection:
Sport Mode: 100% FWD, 100% brakes, 100% REV
Race Mode: 100% FWD, 100% brakes, no REV
Training Mode: 50% FWD, 100% brakes, 50% REV
Single-button setup: Yes, Traxxas EZ-Set®
**NOTE: When properly geared
This product was added to our catalog on September 7, 2021
