RCE1622, Charge Adapter: EC3 Device to Male 4mm Bullets-300mm WireRacer's Edge offers a safe and convenient way to charge batteries equipped with an EC3 connector with any charger utilizing 4mm outputs. The overall length of 300mm (12 ) provides adequate distance between battery and charger and also allows for placing the battery in a safety sack while charging.
RCE1613, Racers Edge Battery/ESC Adapter: Female EC5 to Male XT90
The adapter allows the use of an XT90-equipped battery back in vehicles (such as ARRMA) with EC5 connectors on the ESC.
This product was added to our catalog on June 4, 2021
SPMXCA318, Spektrum RC 4" IC3 Battery to EC2 Device Charge Adapter
This Spektrum RC IC3 Battery to EC2 Device Adapter cable is used for connecting an IC3 Device such as Spektrum SMART Chargers, and connecting EC2 equipped batteries. Can also be used for ESC connections that use IC3 or EC3 ESC connectors to connect a battery with an EC2 connector.Specifications:
Overall length (end to end): 4.5"
Wire length: 3.25"
This product was added to our catalog on May 10, 2021
SPMXCA304, Spektrum RC IC3 6" Device Charge Lead w/4mm Bullets
Spektrum IC3 6" Device Charge Lead. Package includes one charge lead made with 13awg wire and 4mm bullets.
This product was added to our catalog on December 24, 2021
PTK-160TBL, ProTek RC 160TBL "Black Label" Low Profile High Torque Brushless Servo
Brushless servo technology has improved by leaps and bounds. Finally, brushless servos can deliver holding power, speed and precision that can compete with a coreless servo. Combine that with the superior efficiency and lifespan of a brushless motor and you have a servo that hits all the marks, with the performance and quality required for a pro level build.
A black anodized aluminum case with aluminum and gold accents give this servo a stealthy look that sets it apart from the rest. The aluminum upper case provides bomb proof durability and the heat sink center case offers efficient heat dissipation and helps to reduce weight. An aluminum, single arm clamping servo horn is included, as well as a full set of servo mounting washers for a rock solid and durable installation.
NOTE: If you experience glitching or poor performance while using a Futaba transmitter, you must turn off BLS mode. BLS mode is only compatible with Futaba BLS type servos.
Features:
Used by Ryan Maifield to win the 2019 Roar 4wd Off-Road National Championships
Ideal for any 1/10 to 1/8 surface application that can benefit from a low profile configuration
Full aluminum black anodized case
High voltage circuitry
0.08 transit speed, and 230 oz-in of torque @ 6.0V
0.06 transit speed, and 290 oz-in of torque @ 7.4V
Includes aluminum single arm clamping servo horn and servo mounting washers for a rock solid installation
140mm long servo lead
Full metal gears and dual ball bearings
Brushless motor
Servo Model
160TBL
Recommended Application
1/10 to 1/8 Scale Surface
Operating Voltage
4.8V - 7.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.08/60° sec
Operating Speed @ 7.4V
0.06/60° sec
Dynamic Torque @ 6.0V
230 oz-in (16.5 kg-cm)
Dynamic Torque @ 7.4V
290 oz-in (20.9 kg-cm)
Motor Type
Brushless
Output Shaft
25 Tooth
Gears
Metal
Weight
55g
Pulse/Frequency
1520?s / 333hz
Dimensions
39.5x20x30.6mm
Length (Bottom to Mount)
19.35mm
This product was added to our catalog on May 23, 2023
PTK-5201, ProTek RC T-Style Ultra Plug Male Device Pigtail (10cm, 14awg wire) (1)
This is a male T-style ultra plug pigtail from ProTek R/C. The ultra plug is connected to 10cm of 14awg silicone wire.
This product was added to our catalog on October 29, 2007
RCETM4GP, Traxxas Male Connector to 4.0mm Gold Plated Banana Plug with 14AWG Silica Gel Charge Cable
Connectors: compatible with Traxxas Male and 4.0 Banana Male
Wire Length: 30cm/11.8inch
Wire: 14awg Heatproof Soft Silicone Cable
Directly connect to your batteries compatible with Traxxas connectors, and to your charger with 4mm banana plugs
RCE1646, 36" (915mm) Universal Servo Extension 22AWG
Racer's Edge servo extensions feature a JR-style male plug and FUT-style female plug for a truly universal solution. Precision manufactured with gold-plated pins and robust yet flexible 22-gauge wire for minimal signal degradation regardless of overall length.
This product was added to our catalog on April 26, 2021
RCE1627, Racers Edge Female Traxxas to 4mm Bullets Battery Adapter w/2S XH Balance Plug
This 150mm long Racers Edge Adapter features a Female Traxxas to 4mm Bullets, which allows you to use the Traxxas connector with batteries that feature 4mm bullets.
This product was added to our catalog on March 17, 2021
SPMXCA301, Spektrum RC IC3 Device & Battery Connector Set (1 Male & 1 Female)
This is the Spektrum IC3 Device & Battery Connector Set, including one IC3 Male end and one IC3 Female end.
This product was added to our catalog on March 31, 2021
HWI30502001, Hobbywing Multifunction Gen2 LCD Professional Program Box
This Hobbywing Multifunction Gen2 LCD Professional Program Box is for programming Hobbywing brushless ESCs. The user friendly LCD interface makes ESC programming quick and easy. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. It is very compact, portable and applicable for field use.
NOTE: A external battery is needed for powering this program box when the ESC has no built-in/external BEC.
Features:
Works with Platinum, XeRun, EzRun, and Seaking series ESCs
Specifications:
Size: 91x51x17mm (LxWxH)
Weight: 65g
Input Voltage: 4.5V—12.6V
Interface: USB C
ESC interface: Futaba plug
Power supply interface: Futaba plug
This product was added to our catalog on June 4, 2021
ARA390301, Arrma Mega 570 Brushed Motor (9T)
Arrma Mega 570 Brushed Motor. This replacement motor is intended for the Arrma Infraction Mega 4x4. Package includes one pre-wired motor.
Features:
High-quality 9T 570 size brushed motor has a perfect balance of straight-line pace and low-speed torque
Cool ARRMA decal for eye-catching looks and easy motor recognition
Capable of running on 6-7 cell NiMh or 2S LiPo battery for great flexibility to suit your needs
Supplied fitted with 4mm male bullet connectors and 16awg wire
Internal fan to reduce running temperatures
Flux ring increases motor torque
Specifications:
Mounting Holes: M3 @ 25mm
Shaft Diameter: 3.175mm
Shaft Length: 17mm
Motor Diameter: 38.5mm
Motor Length: 65.0mm
Turns: 9
This product was added to our catalog on March 27, 2021
SPMXCA320, Spektrum RC 6" IC3 Battery to IC2 Device SMART Battery Adapter Cable
The Spektrum 6" IC3 Battery to IC2 Device SMART Battery Adapter Cable allows you to connect batteries with an IC2 or EC2 connector to an IC3 connector equipped Spektrum Smart device. This adapter features a male bullet/female housing IC2 connector, combined with a female bullet/male housing IC3 connector, that is joined with 6"/152.4mm long 18awg wire.
This product was added to our catalog on March 1, 2021
PTK-160T, ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
This is the ProTek R/C 160T Low Profile Digital "High Torque" Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.
The ProTek R/C 160T High Voltage Low Profile servo delivers an incredible 216 oz-in of torque and 0.08 transit speed at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 274 oz-in and 0.06! Spec's like these make this servo an excellent choice for any 1/12 to 1/10 scale vehicle application. Other features include a full aluminum case that provides bomb proof durability and improved heat dissipation, a metal gear train that is supported by dual ball bearings, a 160mm long 22awg connector wire with gold plated connectors, and a coreless motor.
Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. And for additional rigidity, four blue aluminum servo ear guides are included as alternatives to the rubber grommets. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.
Features:
Low-Profile case saves space and weight
Ideal for any 1/12 to 1/10 scale vehicle application
Full aluminum case
High voltage circuitry
0.08 transit speed, and 216 oz-in of torque @ 6.0V
0.06 transit speed, and 274 oz-in of torque @ 7.4V
Aluminum single arm servo horn
Full metal gears and dual ball bearings
160mm long 22awg connector wire w/gold plated connectors
Coreless motor
Servo Model
160T
Recommended Application
1/12 to 1/10 scale Surface
Operating Voltage
4.8V - 7.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.08/60° sec
Operating Speed @ 7.4V
0.06/60° sec
Dynamic Torque @ 6.0V
216 oz-in (15.5 kg-cm)
Dynamic Torque @ 7.4V
274 oz-in (19.7 kg-cm)
Motor Type
High Efficiency Coreless Motor
Output Shaft
25 Tooth
Gears
Metal
Weight
54.5g
Pulse/Frequency
1520?s / 333hz
Dimensions
39.5x20x30.3mm
Length (Bottom to Mount)
19.10mm
This product was added to our catalog on December 16, 2021
HWA30112401, Hobbywing Xerun XR10 Pro Stock Spec V4 Sensored Brushless ESC
The Hobbywing Xerun XR10 Pro Stock Spec V4 offers the latest in Hobbywing ESC technology, developed and optimized for stock spec class racing. Recommended for on-road and off-road spec racing, this high quality ESC features a tiny 31.5x25.6x16.1mm footprint, a full aluminum case, and 80 amp current delivery with burst up to 380 amps! Other features include 2S LiPo compatibility, and a 6V/3A switch mode BEC.
Specifications:
Current: Continuous: 80A / Burst: 380A
Battery: 5-7 cells NiMH/NiCd / 2S LiPo
Built-in BEC: 6V@3A (switch mode)
Motor Supported: Sensored and sensorless brushless motors
Suitable Motor: 3650 Motors,1/10 Touring Cars ≥10.5T, 1/10 Buggy≥13.5T
Application: STOCK class of 1/10th Touring Car & Buggy Racing
Cooling Fan: 5V - 7.4V (20x20x8mm)
Wires: 14AWG-200mm
Size: 31.5x25.6x16.1mm
Weight: 28g (without wires and cooling fan)
This product was added to our catalog on May 3, 2023
HWA30501003, Hobbywing LED Program Card
The Hobbywing LED Program Card is used to program Hobbywing ESC's. It features a user friendly interface and is easy to use. Package includes program box and 3-wire male/male plug for hooking the programmer to the ESC.
Compatible With:
Platinum V1/V2 series & FlyFun V5 series of brushless aircraft ESCs.
XeRun series (some XeRun ESCs, please take the instructions of relevant user manuals as standard.)
EzRun series
QuicRun series of brushless car ESCs
Quicrun 1080 & 880 brushed ESC
SeaKing series of brushless boat ESCs
Specifications:
Size: 88x58x14mm
Weight: 40g
Input Voltage: 4.8-6V
NOTE: If the ESC doesn't have a built-in BEC, you will need to use an additional 6.0V battery to supply power to the program box.
This product was added to our catalog on February 3, 2022
HWI30120201, Hobbywing Quicrun 1060 1/10 Brushed ESC
Features:
Water-proof and dust-proof, suitable for all weather races.
Small size, with built-in capacitor module.
Fwd/Rev/Br running mode fits various vehicles (Fwd =Forward, Br=Brake, Rev=Reverse).
Great current endurance capability.
Great built-in BEC output capacity.
Automatic throttle range calibration, easy to use.
ESC parameters are easy to set with jumpers.
Multiple protections:
Over Voltage Protection
Low voltage cut-off protection for battery
Over-heating protection
Throttle signal loss protection
Specifications:
Fwd Cont. Current /Peak Current/ Resistance: 60A/360A/0.001?
Rev Cont. Current /Peak Current/ Resistance: 30A/180A/0.002?
Motor Type Supported: Brushed Motor
Application: 1:10 Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
Suitable Battery: 2-3S LiPo, 6-9 cell NiMH
Brushed Motor Limit:
2S LiPo or 6 cell NiMH: 540 or 550 Size Motor: ?12T, Or RPM<30000 @7.2V
3S LiPo or 9 cell NiMH: 540 or 550 Size Motor: ?18T, Or RPM< 20000 @7.2V
BEC Output: 2A/5V (Switch Mode)
PWM Frequency: 1KHz
Size/ Weight: 35.5(L)*32.18(W)*18(H) / 39g
Running Modes: Forward/Reverse/Brake, Forward/Brake, Forward/Reverse
Cooling Fan: No need
This product was added to our catalog on May 20, 2021
PTK-5213, ProTek RC Receiver Charge Lead (Futaba Female to 4mm Banana Plugs)
This is one receiver charge lead lead from ProTek R/C. This charge lead has a Futaba style battery connector on one end that will accept both Futaba and JR/Airtronics style battery connectors, connected to 4mm banana plugs with high quality 22awg silicone wire.This product was added to our catalog on July 6, 2021
PTK-160SS, ProTek RC 160SS Low Profile Super Speed Metal Gear Servo High Voltage/Metal Case
This is the ProTek R/C 160SS Low Profile Digital "Super Speed" Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.
The ProTek R/C 160SS High Voltage Low Profile servo delivers an incredible 127 oz-in of torque and 0.05 transit speed at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 152 oz-in and 0.04! Spec's like these make this servo an excellent choice for any 1/12 to 1/10 scale vehicle application. Other features include a full aluminum case that provides bomb proof durability and improved heat dissipation, a metal gear train that is supported by dual ball bearings, a 160mm long 22awg connector wire with gold plated connectors, and a coreless motor.
Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. And for additional rigidity, four blue aluminum servo ear guides are included as alternatives to the rubber grommets. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.
Features:
Low-Profile case saves space and weight
Ideal for any 1/12 to 1/10 scale vehicle application
Full aluminum case
High voltage circuitry
0.05 transit speed, and 127 oz-in of torque @ 6.0V
0.04 transit speed, and 152 oz-in of torque @ 7.4V
Aluminum single arm servo horn
Full metal gears and dual ball bearings
160mm long 22awg connector wire w/gold plated connectors
Coreless motor
Servo Model
160SS
Recommended Application
1/12 to 1/10 scale Surface
Operating Voltage
4.8V - 7.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.05/60° sec
Operating Speed @ 7.4V
0.04/60° sec
Dynamic Torque @ 6.0V
127 oz-in (9.1 kg-cm)
Dynamic Torque @ 7.4V
152 oz-in (11 kg-cm)
Motor Type
High Efficiency Coreless Motor
Output Shaft
25 Tooth
Gears
Metal
Weight
54.5g
Pulse/Frequency
1520?s / 333hz
This product was added to our catalog on March 19, 2021
PTK-5072, ProTek RC QS8 Anti-Spark Connector (1 Female)
ProTek RC QS8 Anti-Spark Connectors are a high quality, high current connector that is perfect for high voltage applications. Not only is the connector capable of handling spikes in excess of 300 amps, the design provides an anti-spark connection that eliminates the dreaded POP when you plug in the battery helping to extend the life of the connector. High voltage bashers, speed run enthusiasts and pilots of all disciplines can benefit from this advanced connector technology.
The QS8 connector features 8mm bullets that can accommodate wire up to 6awg, inside a heavy duty nylon/fiber composite housing. Plus, an included plastic wire cap covers the soldered connection and eliminates the need for heat shrink to create an incredibly clean installation that works well, looks great and is easy to manage. NOTE: T-style connector shown in photos is for size reference only, and is not included.
Features:
Anti-Spark Technology Increases Lifespan of Connector
110A Constant/300A Peak Current Rating
8.0mm Gold Plated Brass Bullet
Great for all High Voltage Applications
Nylon/Fiber Composite Housing
Package Includes One Female Connector & Wire Cap
Specifications:
Connector Diameter: 8.00mm
Metal Material: Gold Plated Brass
Plastic Material: Fiber Nylon Composite
Flame retardant rating: UL94 V2
Temperature Range: 200C Max
Rated Voltage: 600V DC
Continuous Current: 110A
Peak Current: 300A
Weight: 20g ea (40g Male+Female Set)
Length: 37.5mm w/end cap
Width: 28mm
Total Length When Connected: Approx 70mm (Male & Female w/End Cap)
Max Wire Gauge: 6awg
Includes:
(1) QS8 Female Anti-Spark Connector
(1) Wire Cap
This product was added to our catalog on March 24, 2021
DYNC0044, Dynamite JST Male Connector w/Pigtail (2)
Dynamite JST Male Connectors. These pigtails feature 20AWG 300mm wire attached to a male JST connector. Package includes two JST pigtails.
This product was added to our catalog on May 18, 2021
TRA3370, Traxxas Velineon VXL-3M Waterproof 1/16 Scale Brushless Power System
Fits:
Traxxas 1/16 E-Revo
Traxxas 1/16 Mustang
Traxxas 1/16 Race Truck
Traxxas 1/16 Rally
Traxxas 1/16 Slash
Traxxas 1/16 Summit
This is the Traxxas Velineon® VXL-3m forward/reverse brushless electronic speed control/Velinion 380 motor combo, and is intended for use with 1/16 scale vehicles.
The Velineon ESC simplifies brushless technology with easy, built-in profiles and intuitive programming. The VXL-3m™ uses advanced circuit design that allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. It sets up, operates, and programs just like the Traxxas XL-5™ family of ESCs so there's no tricky new procedures to learn. Traxxas' exclusive patent-pending Training Mode™ is also included to limit full throttle to 50% for young or inexperienced drivers. For the most advanced users, the VXL-3m is equipped with two-stage low voltage detection to allow LiPo battery use, including powerful 11.1-volt 3S packs!
The Velineon® 380 Brushless Motor uses ultra high-temperature Neodymium magnets, high-speed ball bearings, and a precision balanced rotor for big power and long-life. Since there are no brushes or commutator to wear out, the need for maintenance is virtually eliminated. The Velineon 380 delivers consistent, high-power output, run after run.
Velineon VXL-3m Features:
Traxxas High-Current Connector maintains pure, unrestricted power flow from the battery to the brushless power system.
Built-in two-stage low voltage detection for Lithium Polymer (LiPo) battery use provides a clear signal to the driver that the battery pack is nearing its minimum voltage threshold.
Wide range of battery options, including 6-12 cell NiMH or NiCad packs
The patent-pending Training Mode™ is an exclusive Traxxas feature that reduces the overall power output of the VXL-3m by 50%, making it easier for new or younger drivers to control their model. When they're ready, simply change profiles to unleash full-throttle action.
Advanced circuit design allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. There's no need for additional sensor wiring and hardware complexity.
The EZ-Set® push-button setup operates and programs just like other Traxxas speed controls such as the XL-5. This eliminates the need to learn a new set of procedures.
The VXL-3m is programmable with three drive profiles:
Sport Mode – Fwd / Brake / Rev
Race Mode – Fwd / Brake
Training Mode™ – 50% Fwd / Brake / 50% Rev
Multi-color LED provides clear feedback
Two-stage thermal shutdown protection protects the VXL-3m from overheating.
Locked Rotor Protection™ prevents system damage by cutting power if the vehicle is stuck or the motor is bound.
Battery Over-Voltage Protection™ causes the ESC to go into failsafe mode if the maximum input voltage is exceeded.
Water resistent case design uses rubber seals and o-rings to protect against damage caused by water and moisture.
Micro-fin aluminum heatsink dissipates heat.
MOSFET design provides high-current output (326 amp peak) with incredibly low resistance (.0005 (Ohm)).
Gold plated 3.5mm bullet connectors on 16-gauge Maxx® Cable flow full power to the motor without performance-strangling resistance.
Velineon 380 Features:
Ultra high-temperature sintered Neodymium magnets provide
Massive torque and linear power
Optimized for power and efficiency in 1/16th scale vehicles
Consistent, high-power output, run after run
Low-maintenance, unique Traxxas design
Efficient, high-speed ball bearings
Precision-balanced rotor
8-Turn, 4000KV
Rebuildable
Hex hardware
Brilliant blue-anodized finish
Silicone steel laminations
Delivers more power than comparable brushed motors
VXL-3M Specifications:
Input Voltage: 6 to 12 cells NiMH, 2S to 3S LiPo
Case Size: 26.5mm W x 46.5mm D x 22mm H
Weight: 38 grams
Motors: Sensorless Brushless
Motor Limit: None
On Resistance: 0.0005 Ohms
PWM Frequency: 12,000Hz
Peak Current: 326A
Continuous Current: 52A
BEC Voltage: 6.0V DC
Motor / Battery Wiring: 16-Gauge Maxx® Cable
Transistor Type: MOSFET
Low Voltage Detection: 2-Stage indicators, switchable (on or off)
Thermal Protection: 2-Stage thermal shutdown
Single-button setup: Yes, Traxxas EZ-Set®
Battery Input Connector: Traxxas High-Current Connector
Motor Connector: TRX 3.5mm Bullet Connectors
Velineon 380 Specifications:
Type: Sensorless Brushless
kV (RPM/Volt): 4000kV (8T)
Magnet Type: High Temp Sintered Neodymium
Connection Type: TRX 3.5mm Bullet
Wire Size: 16g Maxx Cable
Continuous Current: 25A
Max Current: 50A Burst
Max RPM: 50,000
Weight: 140g (4.94oz)
This product was added to our catalog on May 7, 2021
TRA3025, Traxxas XL-5HV 3S Waterproof Electronic Speed Control
This is the Traxxas XL-5HV 3S Waterproof Electronic Speed Control. HV stands for compatibility with the high voltage 3S LiPo battery packs for greater efficiency and power. In addition to the three standard profiles (Sport, Race and Training Mode), the XL-5 HV features a Trail profile that serves up a little bit of drag brake for smooth intuitive driving for most of your adventures. A new Crawl profile introduces hill hold and instant reverse for extremely technical courses. Either will help you navigate the trail with ease.
This product was added to our catalog on April 7, 2021
YEA-YA-0574BK, Yeah Racing Aluminum Clamping Servo Horn (Black) (25T)
Yeah Racing Aluminum Clamping Servo Horn. This optional servo horn is great for any RC model requiring a 25T servo horn. Package includes one clamping servo horn and one servo clamp screw.
Dimensions:
Hole Distance: 17mm, 19.5mm
Thread Diameter: 3mm
This product was added to our catalog on December 16, 2021
TRA1275, Traxxas Stinger 540 Electric Motor (20T)
This is a Traxxas 20 turn Stinger electric motor. The Stinger motor is a mild modified motor that gives you a good balance of speed and run time, depending on how you have your car set-up and what kind of batteries you are using.
A "20-turn" single (which is the designation of the Stinger motor), indicates that a single thickness of wire is wound 20 times around the armature of the electric motor. The less times the wire is wound; the faster the motor will go. The thicknesses of wire around the armature determines how much torque the motor puts out. So, a 20-turn double would provide more torque than the 20-turn single. Remember, though, that a modified motor must be geared properly in order to achieve its maximum performance and may also eat up your battery causing you to have shorter run times.
This product was added to our catalog on May 7, 2021
CSE010016502, Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo w/1717 Sensored Motor (1650kV)
COMPATIBILITY:
Arrma Felony 6S BLX
Arrma Infraction 6S BLX
Arrma Infraction V2 6S BLX
Arrma Limitless
Arrma Outcast 8S BLX
The Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo with 1717 Sensored Motor is an incredible combo developed specifically for high voltage large scale applications. The MAMBA MONSTER X 8S ESC utilizes Castle’s proprietary CRYO-DRIVE technology helping to reduce the heat generated, and remove heat more efficiently. These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 40mm cooling fan and a forged elliptical fin heatsink, the design maximizes airflow throughout the system, taking thermal performance to a level never seen before.
Mamba Monster X 8S is a workhorse that will dominate in the harshest of environments. Designed with durability in mind, this ESC features a robust aluminum case, combined with epoxy potting helps to guarantee protection around the circuitry, as well as allowing all-weather use. You can easily optimize the ESC for any driving condition - rugged terrain, smooth pavement, or rock and gravel, the MMX8S can handle it all. Plus, the Castle Link Programming Suite will allow the user to create, save and download setup profiles using a Windows™ PC, or wirelessly with the convenience of the B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS. The MMX8S also allows tuning on-the-fly via the Auxiliary wire, allowing access to programming parameters such as Torque Control, Max Brake or Rock Race Mode, further optimizing your vehicle for any racing or bashing application you can imagine!
When paired with the included Castle 1717-1650KV sensored motor, heavy, high speed rigs will experience controllable low-end control without sacrificing power, punch or speed. This motor is a blast from the past with the added benefit of sensored capabilities! It is the perfect upgrade for any 1/6th scale vehicles weighing up to 20 lbs and running up to 8s LiPo; it is also a great upgrade for drivers looking for a reliable, high torque 8s motor for their 1/8th scale vehicles! The Castle 1717 1650KV sensored motor features an improved 4-POLE 12-SLOT design that boasts exceptional EFFICIENCY and produces LESS HEAT. SmartSense™ mode uses the motor’s sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is spinning, it seamlessly transitions to Castle’s ultra-efficient sensorless mode. You’ll put more power to the ground, where it should be, instead of wasting it through raw heat and RPMs.
Application Guidelines: Mamba Monster X 8S and 1717-1650Kv motor is intended for use in 1:6 scale vehicles weighing up to 20 lbs. and running up to 8S LiPo. Also a great upgrade for heavier 1/8th vehicles.
Features:
ESC:
Input Voltage Range 2S-8S LiPo
Sensorless, Sensored and SmartSense™ Running Modes
Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V)
CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs
ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the electronics and promote efficient heat transfer
Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation
Oversized factory equipped thermally controlled 40MM cooling fan
Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters
Waterproof design for all weather conditions
Data logging capability to capture and record performance data from your vehicle
Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter
Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff
Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake
Easily tune and update ESC with USB and Bluetooth™ programming options
Castle Link USB programming kit (coupon included with purchase)
Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store
Proudly designed and manufactured in Olathe, KS USA and backed by Castle Creations' 1-year warranty
Motor:
4-POLE 12-SLOT sensored design that boasts exceptional efficiency and produces less heat
Proprietary stator winding produces low internal resistance for a cooler running motor
Oversized NMB bearings and vibration dampening system ensure the longest possible bearing life
High-strength, high-temperature grade neodymium sintered magnets combined with high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions and high RPMs
Specifications:
ESC:
Input Voltage Range: MIN: 2S LiPo , MAX: 8S LiPo 33.6V
BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Operating Environment: Waterproof* design allows for use in nearly any environment.
Brake: Proportional
Reversible: Yes, but may be disabled for racing.
On/Off Switch: Yes, waterproof
Cooling Fan: Yes, factory equipped (40MM), fully removable** (see Product Use Statements below)
Size: L x W x H 69.5mm x 54.1mm x 47mm
Weight (with no battery connector): 5.75 oz. (163 grams)
Connectors: 6.5mm female bullets for motor connection.
Items Needed for Operation: A high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors, soldered to the battery leads.
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows™ software, or the Castle Link iOS® or Android® app with B-LINK™ Bluetooth™ Adapter (sold separately).
Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX transmitters.
Motor:
Input Voltage Range: 3S-8S LiPo
Kv: 1650
Max. RPM: 56,000
Size: Length: 3.35" (85.1mm) Diameter: 1.87" (47.6mm)
Weight (w/wires): 21.08oz. /597.6g
Shaft Diameter: 5mm
Mounting Hole Specifications: M3 and M4@25.4mm (1.0") Diameter
Cooling Fan: Not available
Connectors: 6.5mm male connectors
Application Guidelines: Ideal for vehicles up to 20lbs running 6s – 8s LiPo. Examples include Losi LST2-E; Arrma™: Limitless™, Typhon™ 6s, Infraction™, Talion™ 6s; Traxxas: E-Maxx™, E-Revo™, UDR™, Summit™; Redcat Shredder™
ESC Product Use Statements:
Recommended battery capacity for 1:6th scale vehicles is 5000mah. We recommend using 50C continuous discharge or higher LiPo batteries.
Surge ratings should never be used to determine a pack’s suitability for a brushless application.
Castle recommends a high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors.
Applying voltages higher than 33.6V will cause irreparable damage to ESC.
Although Mamba Monster X 8S is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC with clean water after exposure to corrosives or dirt.
The ESC cooling fan must be removed prior to driving in wet conditions. It is not waterproof.
Tech Notes:
This motor includes 10AWG wire and 6.5mm connectors for use specifically this ESC/Motor combo.
Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs.
Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.
Includes:
Mamba Monster X 8S ESC
4-POLE Sensored 1717-1650KV Motor
Castle Sensor Harness Adapter
200mm Sensor Wire
Mamba Decals
Coupon for free Castle Link USB
ESC Quick Start Guide
Motor Quick Start Guide
This product was added to our catalog on June 23, 2021
SPMXCA509, Spektrum RC IC5 6" Battery Parallel Y-Harness Connector
This is a Spektrum IC5 6" Battery Parallel Y-Harness, featuring two male IC5 battery connectors wired in Parrallel to a female IC5 device connector. This harness allows you to use two batteries with one model.
This product was added to our catalog on December 31, 2021
TRA3481, Traxxas Maxx SLash/Unlimited Desert Racer Brushless Motor (2200Kv)
The Traxxas Unlimited Desert Racer Motor is a 4-pole 2200Kv, brushless motor. This is the replacement motor for the UDR. Motor is factory wired with 6.5mm bullet connectors.
Specifications:
Can Length: 77.5mm
Can Diameter: 41.8mm
Total Length: 98.5mm
Shaft Length: 21mm
Shaft Diameter: 4.99mm
This product was added to our catalog on April 16, 2021
TRA2275, Traxxas 2275 High Torque Metal Gear Waterproof Digital Servo
Traxxas 2275 High Torque Metal Gear Waterproof Digital Servo. This is a replacement servo intended for the Traxxas Sledge, however this will work as a strong upgrade servo for several other 1/10 and 1/8 scale vehicles. This servo features waterproof construction, high torque and durable metal gears.
Specifications:
Torque: 347oz-in @ 6.0V
Gears: Metal
Case: Aluminum center w/ full ball bearings
Length: 45mm
Width: 20mm
Height: 55mm
This product was added to our catalog or updated on April 4, 2022
DYNC0045, Dynamite JST Female Connector w/Pigtail (2)
Dynamite JST Female Connectors. These pigtails feature 20AWG 300mm wire attached to a female JST connector. Package includes two JST pigtails.
This product was added to our catalog on March 19, 2021
TRA3024R, Traxxas XL-2.5 ESC w/Low Voltage Detection (Waterproof)
This is the Traxxas XL 2.5 Electronic Speed Control, with Low Voltage Detection. Designed and engineered by Traxxas, the XL-2.5 Brushed Electronic Speed Control provides smooth throttle control with 380-size and smaller mini-motors and is completely waterproof for all-weather R/C driving fun. This high-performance ESC is packed with impressive specifications and features that are normally only found on expensive high-end replacement units. The XL-2.5 features three throttle profiles, Thermal Shutdown Protection, 6-8 cell NiMH and 2S LiPo compatibility, and built-in BEC. High-frequency operation combined with ultra-low resistance make the XL-2.5 an efficient and ultra-smooth fully proportional speed control. The XL-2.5 is manufactured by Traxxas to ensure the highest level of quality and support and is backed by the Traxxas Lifetime Electronics Warranty.
Traxxas High-Current Connector
The XL-2.5 ESC is equipped with the Traxxas high-current connectors for restriction-free current flow.
Patent-Pending Training Mode™
An exclusive feature that places the XL-2.5 ahead of the pack is the patent pending Training Mode. This feature reduces the overall power output of the XL-2.5 by 50% making it easier for new drivers to control their model. When they’re ready, simply change profiles to unleash full-throttle action. Only Traxxas has it!
XL-2.5 Waterproof ESC Features:
Innovative waterproof design
10-turn motor limit for 380 size motors
Fully-proportional forward, reverse, and braking control
Programmable with three drive profiles:
Sport Mode – Fwd / Brake / Rev
Race Mode – Fwd / Brake
Training Mode – 50% Fwd / Brake / 50% Rev
EZ-Set® push-button setup
Multi-color LED
Thermal shutdown protection
Efficient, low-loss MOSFET design
High-capacity heat sink
Smooth, high-frequency operation
Easy installation in Traxxas models
Backed by the Traxxas Lifetime Electronics warranty
XL-2.5 Waterproof ESC Specifications:
Input Voltage: 4-8 cells NiMH; 2S LiPo
Case Size: 26.5mm W x 46.5mm D x 22mm H
Weight: 33 Grams
Motor Limit: 10-turns (380 size)
On Resistance (@Trans): 0.008 Ohms
Reverse Delay: None
BEC Voltage: 6.0V DC
Power Wire: 16 Gauge / 40mm
Input Harness Wire: 26 Gauge / 130mm
Motor Wires: 26 Gauge / 130mm
Transistor Type: MOSFET
PWM Frequency: 2300 Hz
Thermal Protection: Thermal shutdown
Profile selection:
Sport Mode: 100% FWD, 100% brakes, 100% REV
Race Mode: 100% FWD, 100% brakes, No REV
Training Mode: 50% FWD, 100% brakes, 50% REV
Single-button setup: Yes, Traxxas EZ-Set®
This product was added to our catalog on May 7, 2021
Waterproof High Voltage Digital Servo 0.13sec / 444.4oz @ 7.4V - Black Edition
The SW-1210SG-BE is the premier waterproof digital servo in the Savox Lineup. This coreless servo provides great torque and is a great upgrade if your looking to drive your RC vehicle in any condition...rain, sleet, or snow.
Features:
Strong unique steel gears provide durability and assurance.
Capable of HV operation.
Waterproof construction for harsh elements.
Ideal for cars, truck, and boats subject to water or snow.
Specifications:
Torque @ 6v - 20.0kg/277.7oz-in
Torque @ 7.4v - 32.0kg/444.4oz-in
Speed @ 6v - 0.15 sec/60 deg
Speed @ 7.4v - 0.13 sec/60 deg
Dimensions L x W x H (mm): 40.6 x 20.7 x 42.0
Weight: 71g
