BetaFPV
RaceDayQuads GEPRC CL25 Cinelog25 Cinewhoop 2.5" Micro Frame Kit
Does not come with naked Gopro mount. Please refer to the includes list at the bottom of the listing for all included items. The classic CL25 Frame, designed by the GEPRC team, has been upgraded. They've redesigned the shock absorption structure of the camera mount, eliminated the jelly coming from the FPV camera, and you can now use 3, 4, and 5 damping rings according to the flight state to obtain the best stability in vibration and noise. The CL25 can be used for Vista HD digital image transmission system or Analog image transmission system. The center of gravity of the quadcopter is in the middle, Check out all our DJI-compatible frames, electronics, and accessories as well as our whole GEPRC product line! Specifications Dimensions: 109mm Frame Style: Cinewhoop Top Plate: 2.5mm Bottom Plate: 1.5mm Bottom Plate(camera): 2mm Stack Size: 26.5x26.5mm Motor Mount: 9x9mm (compatible with 1105/1204/1206 motors) Camera Mount: 14-20mm (Nano and Micro-sized) Weight: 47.8g Recommended: Motor: BetaFPV 1404 4500Kv Micro Motor 4 Pack FC/ESC: GEPRC F411 2-6S AIO Flight Controller w/ 35A 4in1 ESC Prop: Gemfan D63 Ducted Durable Tri-Blade 2.5" Cinewhoop Prop 8 Pack LiPo: RDQ Series 14.8V 4S 650mAh 80C LiPo Micro Battery Includes 1x Top plate 2.5mm 1x Bottom plate 1.5mm 1x Bottom Plate (Camera)1.5mm 4x (M2x3.5x25mm) Aluminum posts 2x (M2x3.5x8mm) Aluminum posts 28x (M2x6mm) YFS Round head screws 2x (M2x8mm) YFS Round head screws 4x (M2x12mm) YFS countersunk head screws 16x (M2x2mm) Nylon Nuts 4x (M2x18mm) YFS countersunk head screws 5x Damping Rings 1x (19x19mm) Mount of camera 1x (14x14mm) Mount of camera 1x 3D print part of XM antenna 1x 3D print part of TBS antenna 1x Naked Camera Mount (This is just the base, NOT the actual camera case) 2x Batteries pads 2x EVA Landing pads 4x 2.5-inch Guards 1x EVA Damping Ring of Guard 2x Antenna Tubes 2x Batteries straps (M15x150mm）
$31.99
RaceDayQuads BetaFPV F722 V2 2-6S AIO Whoop/Toothpick Flight Controller (w/ 35A 32Bit 4in1 ESC) - ICM42688
F722 2-6S AIO 35A FC is a very reliable FC that is made to meet your advanced FPV needs. Comes with an F722 chip and a BLHeli_32 ESC, this board provides a better performance capability and higher calculation speed, which brings pilots a more stable and smoother flight. What's more, F722 AIO FC has specially added a 6-pin connector for DJI Digital VTX, just plug & play, less solder work needed, super easy to install. It can handle 35A continuous current (40A burst), supports the 2-6S lipo battery. Check out all our whoop flight controllers, and all our BetaFPV gear! A very in-depth video on the BetaFPV F722 V2 2-6S AIO Whoop/Toothpick Flight Controller. Features Built-in STM32F722RET6 CPU, F722 FC is more powerful than F4. It features a fast processing speed and stable performance, providing reliable and smooth flight for 4"-5" drones. F722 AIO 35A FC has specially added a 6-pin connector for HD Digital VTX, just plug & play, less solder work needed, perfect for the pilots who enjoy the HD Digital VTX system. 6 full UARTs are available on this board. With plenty of UARTS, Pilots could have more options for external parts like VTX, GPS, Receiver, and other components. It can handle 35A continuous current (40A burst), supports the 2-6S lipo battery, and gives the drone a more robust flight performance. With the 6S battery and this F722 35A AIO FC, the drone will break through the limit of the power of the toothpick drone, exploring more possibilities in 4-5'' drones. The new BLHeli_32 ESC version is built-in a 16MB flash memory chip dedicated to Blackbox logging, which is an extremely powerful tool for tuning and troubleshooting an FPV drone. It has a faster processing speed and up to 128k PWM frequency, providing a more stable and smoother flight for pilots. V2 with BLHeli_32 ESC V1 with BLHeli_S ESC PWM Frequency 24k-128k 24k-96k ESC Firmware BLHeli_32.9, 32-bit BLUEJAY V0.16, 8-bit Blackbox 16MB Not included Weight 9.00g 7.06g Board Thickness 1.6mm 1.4mm BLHeli_32 ESC Firmware The F722 35A AIO FC has two boards with different ESC versions for choice. The V2 board uses AT32F421G8U7 MCU, a 32-bit ESC chip, with BLHeli_32 ESC firmware. This firmware supports up to 128k PWM frequency, featuring faster processing speed and unlocking more functions for the flight. BLHeli_32 ESC BLHeli_S ESC MCU AT32F421G8U7 EFM8BB21F16G-C Firmware Version BLHeli_32.9, 32-bit BLUEJAY V0.16, 8-bit PWM Frequency 24k-128k 24k-96k Bidirectional DSHOT Support Support Signal Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 Know More About ICM42688 Gyro The F722 FC ICM42688 version has the same solder pad and layout as BMI270 except for the gyro chip. Besides, you can also find the difference in Betaflight settings. The ICM42688 gyro supports 8.00 kHz gyro update frequency compared with the BMI270 gyro which supports 3.20 kHz. When using a 6S battery, the ICM42688 gyro has a good performance. The degree between ICM42688 and BMI270 gyro is different. When configuring F722 FC ICM42688 version, the gyro degree should be set to CW270°. Diagram for F722 35A AIO FC The below picture is the top front of the F722 35A AIO Brushless FC. (Both V1 and V2 boards have the same solder pad and connector ports.) The below picture is the bottom front of the F722 35A AIO Brushless FC. (Both V1 and V2 boards have the same solder pad and connector ports.) There are 2 LEDs on the bottom of the board to indicate the status, including the FC LED (Blue) and FC Power LED (Red). The LED status for V1 and V2 boards are the same. LED Status Description FC LED (Blue) Solid Armed FC LED (Blue) Extinguished Disarmed Power LED (Red) Solid Power on How to Connect the External RX&VTX To connect the external RX&VTX, please refer to the below diagram. F722 35A AIO V1 and V2 boards have the same soldering pad and connecting ports. Specifications Flight Controller Item: F722 35A AIO Brushless Flight Controller Weight: 9.00g (BLHeli_32) CPU: STM32F722RET6 Six-Axis: ICM42688 Mounting hole size: 26mmx26mm Firmware version: betaflight_4.3.0_STM32F7X2 OSD: Built-in BetaFlight OSD (OSD chip: AT7456E) Support programmable LED like WS2812 etc Built-in current sensor Blackbox: 16MB (V2 with BLHeli_32 ESC included) ESC Signal support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/Flysky Receiver/DSMX Receiver/TBS Crossfire Receiver (requires external connection) Input voltage: 2S-6S Lipo Continuous current: 35A Peak current: 40A ESC firmware: BETAFPV_35A_V2_BLHeli_32_Multi_32_9 (BLHeli_32) Indicators: Power indicator (Red) / FC indicator (Blue) Capacitance: CS|5*10*13mm|470μF|35V Connector: 80mm 14AWG silicone cable with XT60 Recommended motors: 14XX series, 15XX series, 16XX series, 18XX series, 20XX series Includes 1x BetaFPV F722 V2 2-6S AIO Whoop/Toothpick Flight Controller (w/ 35A 32Bit 4in1 ESC) - ICM42688
$94.99
RaceDayQuads DarwinFPV BNF Baby Ape II Analog 3.5" Micro Quad - 6S - Choose Your Receiver
Pre-Orders shipping ASAP! For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer. DarwinFPV has always been committed to designing cost-effective FPV drone. They have accepted feedback from pilots, solved the problems that pilots are most concerned about, and brought better products to everyone who uses them. Adhering to these beliefs, DarwinFPV brings BabyApe Ⅱ. BabyApe Ⅱ is a 3.5-inch small freestyle FPV drone with a take-off weight of less than 250g that fulfills most countries' regulations. The BabyApe Ⅱ has a more powerful configuration, adopts a more reliable manufacturing process and a new power system, and has a higher level of performance, durability, and power. The flight time can reach 13 minutes, the flight distance is 1.5 kilometers, and the maximum speed is up to 92km/h. The 6S version comes with powerful 1504-2300Kv motors, and choose between PNP (No RX) or ELRS 2.4GHz for your receiver! Check out our other pre-built quads, as well as the rest of our DarwinFPV selection! Features Compared with similar products of other brands, BabyApe Ⅱ only sells for $139.99, which once again perfectly reflects the super high cost performance； It comes with 1504 motors and 3.5-inch propellers, the power is stronger and the response speed is faster; The camera and stack are protected by glue potting, which effectively prevents the risk of damage due to contact with metal particles, fine sand, gravel, weeds or dew, and the entire electronic system is more reliable and durable; The addition of a buzzer and extra LED lights is extremely beneficial for beginners, who frequently confront circumstances such as over-discharge the battery and locating drones due to mistakes that lead the drone to crash; The independent action camera base can be used with naked gopro, thumb camera, etc. to record amazing images during flight at 4K/60 frames. Specifications Brand: DarwinFPV Model: BabyApe Ⅱ 6S Frame: Wide X Wheelbase: 156mm Size: 126mmx150mmx50mm Flight Control: F411 MPU6500 AT7456E Firmware： DARWINF411 Firmware: BETAFPV_Nano_2400_RX The receiver's factory firmware is ELRS_V3.2.0 Reserved port: 1x SBUS(RX1 reverse)、2x Uarts(1,2)、2x Softserial, 1x I2C、1x RGB、1x Buzzer、1x USER(A15)、1x USB ESC: Bluejay 48KHz 3-6S 30A Motor： 6S version：1504-2300KV Propeller: HQProp T3.5x2x3GR-PC Weight: 135.4 g(analog version) Receiver: ELRS 2.4GHz Darwin FPV "Cement" Ultra Durable FPV Drone Camera Sensor type：1/3" CMOS Sensor Image：16:9 TV System: NTSC Horizontal Resolution：1200TVL Lens：2.1mm 160° Electronic Shutter: 1/50~1/100000 sec Video Output: CVBS Min. Illumination：0.001Lux wb: automatic DNR: 3D DNR WDR: 100db Input voltage: DC 3.7-24V Working current：80mA@DC12V/170mA@DC5V IP: IP67 Size：19x19mm Weight：7.9g DarwinFPV 25/200/400/600mW VTX Output Power: 25/200/400/600mW(adjustable) Frequency: 5.8Hz 40port Power Supply Voltage Range: 5V Weight: 3.5g Pitch: 28x15mm(length x width) Protocol: SmartAudio Indicator Light Description: Includes 1x DarwinFPV BNF Baby Ape V2 3.5" Analog Quad - 6S - Choose Your Receiver 4x HQProp T3.5x2x3GR-PC 2x Battery cable strip ( 10x170mm) 2x EVA shock pad（thickness：10㎜） 1x Spare screws bag 1x Sticker 1x Manual
$157.99
BetaFPV DarwinFPV BNF Baby Ape II Analog 3.5" Micro Quad - 4S - Choose Your Receiver
Pre-Orders shipping ASAP! For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer. DarwinFPV has always been committed to designing cost-effective FPV drone. They have accepted feedback from pilots, solved the problems that pilots are most concerned about, and brought better products to everyone who uses them. Adhering to these beliefs, DarwinFPV brings BabyApe Ⅱ. BabyApe Ⅱ is a 3.5-inch small freestyle FPV drone with a take-off weight of less than 250g that fulfills most countries' regulations. The BabyApe Ⅱ has a more powerful configuration, adopts a more reliable manufacturing process and a new power system, and has a higher level of performance, durability, and power. The flight time can reach 13 minutes, the flight distance is 1.5 kilometers, and the maximum speed is up to 92km/h. The 4S version comes with powerful 1504-3600Kv motors, and choose between PNP (No RX) or ELRS 2.4GHz for your receiver! Check out our other pre-built quads, as well as the rest of our DarwinFPV selection! Features Compared with similar products of other brands, BabyApe Ⅱ only sells for $139.99, which once again perfectly reflects the super high-cost performance； It comes with 1504 motors and 3.5-inch propellers, the power is stronger and the response speed is faster; The camera and stack are protected by glue potting, which effectively prevents the risk of damage due to contact with metal particles, fine sand, gravel, weeds or dew, and the entire electronic system is more reliable and durable; The addition of a buzzer and extra LED lights is extremely beneficial for beginners, who frequently confront circumstances such as over-discharge the battery and locating drones due to mistakes that lead the drone to crash; The independent action camera base can be used with naked GoPro, thumb camera, etc. to record amazing images during flight at 4K/60 frames. Specifications Brand: DarwinFPV Model: BabyApe Ⅱ 4S Frame: Wide X Wheelbase: 156mm Size: 126mmx150mmx50mm Flight Control: F411 MPU6500 AT7456E Firmware：DARWINF411 Firmware: BETAFPV_Nano_2400_RX The receiver's factory firmware is ELRS_V3.2.0 Reserved port: 1x SBUS(RX1 reverse)、2x Uarts(1,2)、2x Softserial, 1x I2C、1x RGB、1x Buzzer、1x USER(A15)、1x USB ESC: Bluejay 48KHz 3-6S 30A Motor: 4S version：1504-3600KV Propeller: HQProp T3.5x2x3GR-PC Weight: 135.4 g (analog version) Receiver: ELRS 2.4GHz Darwin FPV "Cement" Ultra Durable FPV Drone Camera Sensor type：1/3" CMOS Sensor Image：16:9 TV System: NTSC Horizontal Resolution：1200TVL Lens：2.1mm 160° Electronic Shutter: 1/50~1/100000 sec Video Output: CVBS Min. Illumination：0.001Lux wb: automatic DNR: 3D DNR WDR: 100db Input voltage: DC 3.7-24V Working current：80mA@DC12V/170mA@DC5V IP: IP67 Size：19x19mm Weight：7.9g DarwinFPV 25/200/400/600mW VTX Output Power: 25/200/400/600mW(adjustable) Frequency: 5.8Hz 40port Power Supply Voltage Range: 5V Weight: 3.5g Pitch: 28x15mm(length x width) Protocol: SmartAudio Indicator Light Description: Includes 1x DarwinFPV BNF Baby Ape V2 3.5" Analog Micro Quad - 4S - Choose Your Receiver 4x HQProp T3.5x2x3GR-PC 2x Battery cable strip ( 10x170mm) 2x EVA shock pad（thickness：10㎜） 1x Spare screws bag 1x Sticker 1x Manual
$157.99
