TRA5848, Traxxas Slash 4X4 Pre-Painted Body (Rock N' Roll)
Traxxas Slash 4X4 Pre-Painted Body. Package includes factory painted and trimmed body with decals applied.
This product was added to our catalog on April 12, 2021
TRA5883, Traxxas BFGoodrich KM2 Tire w/Split-Spoke Rear Wheel (2) (Black) (Standard))
This is a set of two Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires, Pre-Mounted on Split-Spoke SCT Wheels. These are intended for use on the front and rear of the Traxxas Slash 4x4 and the rear of the Traxxas Slash 2wd line of trucks. These are fully licensed BFGoodrich Mud-Terrain T/A tires, and have been proven performers in TORC series competition. The distinctive tread design has been faithfully re-created, complete with white sidewall lettering.
Fits:
Traxxas Nitro Slash
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Telluride 4x4
The design of the Split-Spoke SCT wheel features a black center and color molded beadlock detail in either blue or chrome for a realistic look. Fully compatible with factory Traxxas and aftermarket 2.2/3.0 tires, the wheels feature 12mm hexes and the same offset as Slash 2wd rear wheels.
This product was added to our catalog on May 10, 2021
TRA6730G, Traxxas Rustler/Slash 4x4 LCG Chassis Brace Kit (Green)
Chassis brace kit, green (fits Rustler® 4X4 or Slash 4X4 models equipped with Low-CG chassis)
This product was added to our catalog on May 7, 2021
TRA6786, 4X4 Bearing Kit
Restore your Traxxas model to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replacements. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. Not all bearings compatible with BL-2s models
This product was added to our catalog on October 4, 2023
TRA6786X, 4X4 Stainless Bearing Kit
Boost performance and reduce maintenance with this stainless steel bearing kit. The bearing kit replaces the standard bearings with high quality stainless steel bearings for long-lasting performance in wet conditions. High quality black seals offer ultimate protection from the elements with less maintenance in dirty environments. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. Not all bearings compatible with BL-2s models
This product was added to our catalog on October 4, 2023
TRA6787, Traxxas Hardware Kit 4X4 Hoss/Slash/Stampede/Rustler
Give your Traxxas model a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware. Individual compartments keep everything organized with a handy label to measure and identify the parts. Not all hardware compatible with BL-2s models.
This product was added to our catalog on October 4, 2023
TRA6787X, 4X4 Stainless Hardware Kit
Give your Traxxas model a complete upgrade with this stainless steel hardware kit. The hardware kit replaces the standard hardware on your vehicle with stainless steel hardware for long-lasting performance in wet conditions. Hex-drive heads deliver a positive and secure connection for easy installation and removal. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. Not all hardware compatible with BL-2s models
This product was added to our catalog on October 4, 2023
TRA6788, Traxxas Slash 4x4 Pro-Built Front Differential
The Traxxas Slash 4x4 Pro-Built Front Differential is a pre-built replacement for Slash 4x4 Short Course trucks. Traxxas Pro-Built parts allow you to get your rig back in action faster and with less effort. These components allow you to replace parts as a complete unit, no assembly required.
This product was added to our catalog on September 7, 2021
TRA6789, Traxxas Slash 4x4 Pro-Built Rear Differential
The Traxxas Slash 4x4 Pro-Built Rear Differential is a prebuilt replacement for Slash 4X4 Short Course Trucks. Traxxas Pro-Built parts allow you to get your rig back in action faster and with less effort. These components allow you to replace parts as a complete unit, no assembly required.
This product was added to our catalog on September 7, 2021
TRA6811R, Traxxas Slash 4X4 Heavy Duty Body (Clear)
This is an optional Traxxas Slash 4X4 Clear Heavy Duty Body, intended for use with the Traxxas Slash 4X4 and Traxxas Slayer short course trucks. This clear body is a blank canvas, ready for you to add your own unique paint scheme, and has been factory trimmed. This body includes window masks and decals.
This product was added to our catalog on September 7, 2021
TRA6823, Traxxas Aluminum Bulkhead Front & Rear Tie Bar Set (Blue)
This is a replacement Traxxas Bulkhead Front & Rear Aluminum Tie Bar Set, and is intended for use with the Traxxas Slash 4x4 short course truck.
This product was added to our catalog on September 7, 2021
TRA6832, Traxxas Caster Block Set
This is a replacement Traxxas Caster Block Set, and is intended for use with the Traxxas Slash 4x4 short course truck.
This product was added to our catalog on September 7, 2021
TRA6832X, Traxxas Aluminum Caster Block Set (Blue) (2)
Traxxas Aluminum Caster Blocks are CNC Machined from 6061 Aluminum, and will increase the durability of the front end of the Slash 4x4, Rustler 4x4, Stampede 4x4, XO-1 and others. For the ultimate in front end durability, pair with the Traxxas Aluminum Steering Block Set (TRA6837X).
This product was added to our catalog on May 7, 2021
TRA6835X, Traxxas Slash 4X4 Front Bumper (LED Compatible)
Traxxas Slash Front Bumper. This replacement front bumper is intended for the Traxxas Slash platforms.
Package includes one front bumper with a bumper mount.
This product was added to our catalog on February 9, 2022
TRA6836X, Traxxas 4WD Slash Rear Bumper Set w/Mount
Traxxas 4WD Slash Rear Bumper Set with Mount. This replacement rear bumper is intended for the LED equipped Traxxas Slash 4WD. Package includes one bumper mount set.
This product was added to our catalog on August 12, 2021
TRA6837, Traxxas Left/Right Steering Block Set
Replacement part for these models:
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 VXL
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
Stampede® 4X4
Accessory part for these models:
Slash 4X4 Ultimate
This product was added to our catalog on September 7, 2021
TRA6837X, Traxxas Aluminum Steering Block Set (Blue) (2)
The Traxxas Aluminum Steering Block Set is CNC Machined from 6061 Aluminum, and will increase the durability of the front end of the Slash 4x4, Rustler 4x4, Stampede 4x4, and others. For the ultimate in front end durability, pair with the Traxxas Aluminum Caster Block Set (TRA6832A).
This product was added to our catalog on May 7, 2021
TRA6841, Traxxas Center Driveshaft Cover (Clear)
This is a set of replacement Traxxas Center Driveshaft Cover, and are intended for use with the Traxxas Slash 4x4 short course truck.
This product was added to our catalog on September 7, 2021
TRA6842, Traxxas .8 Mod Spur Gear (50T) (Slash 4x4)
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.
Accessory part for these models:
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 Platinum
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
Stampede® 4X4
This product was added to our catalog on September 7, 2021
TRA6844, Traxxas Slash 4X4 Pre-Painted Body (Orange & Blue)
Traxxas Slash 4X4 Pre-Painted Body. This is a replacement body intended for the Slash 4x4 and comes in a pre-painted orange and blue paint scheme. Package includes one body.
This product was added to our catalog on September 7, 2021
TRA6845A, Traxxas Slash 4x4 Aluminum Drag Link (Blue)
Traxxas Rally
Traxxas Rustler 4x4
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 4x4
This is an optional Traxxas Aluminum Drag Link, intended for use with Traxxas Slash 4x4, Rustler 4x4 and Stampede 4x4 models. This machined aluminum part is stronger than the stock plastic parts, and is available in a variety of colors.
This product was added to our catalog on September 7, 2021
TRA6845X, Traxxas Steering Bellcrank Set
This is a replacement Traxxas Steering Bellcrank Set. Package includes steering bellcranks, servo saver, servo saver spring, servo spring retainer, servo horn and hardware.
This product was added to our catalog on April 26, 2021
TRA6851R, Traxxas Slash 4x4 and Stampede 4x4 Front Heavy Duty Steel CV Driveshaft (2)
This is an optional Traxxas Front Steel Constant-Velocity Driveshaft Set, and is intended for use with the Traxxas Slash 4x4 and Stampede 4x4 1/10 scale trucks. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin.
Traxxas Hoss
Traxxas Rustler 4x4
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 4x4
This product was added to our catalog on May 7, 2021
TRA6852R, Traxxas Rear Heavy Duty Steel CV Driveshaft (2)
This is an optional Traxxas Rear Steel Constant-Velocity Driveshaft Set, and is intended for use with the Traxxas Slash 4X4 and Slash 2wd 1/10 scale short course trucks, as well as the Traxxas Rally. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and blue silicone boots add a custom look.
This product was added to our catalog on September 7, 2021
TRA6856X, Traxxas Aluminum 17mm Wheel Adapter Set (Blue) (4)
This is an optional Traxxas Aluminum 17mm Wheel Adapter Set, and is intended for use with the Traxxas Slash 4x4 truck. This kit includes all the components necessary to convert your truck to 17mm 1/8 scale off-road tires including hubs, hub retainers, wheel pins, splined 17mm wheel nuts and an allen wrench for installation.
This product was added to our catalog on September 7, 2021
TRA6860A, Traxxas Motor Mount w/Hardware
This is a replacement Traxxas Motor Mount, and is intended for use with the Traxxas Slash 4x4, Hoss, Telluride 4x4, and the Stampede 4x4. Package includes one mount.
This product was added to our catalog on September 7, 2021
TRA6876, Traxxas BFGoodrich KM2 Tire w/SCT Rear Wheel (2) (Chrome/Green) (Standard)
Traxxas Nitro Slash
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Telluride 4x4
This is a set of two Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires, Pre-Mounted on SCT Chrome Wheels. These are intended for use on the front and rear of the Traxxas Slash 4x4 and the rear of the Traxxas Slash 2wd line of trucks. These are the fully licensed BFGoodrich Mud-Terrain T/A tires, and have been proven performers in TORC series competition. The distinctive tread design has been faithfully re-created in high grip rubber.
The design of the SCT wheel features a chrome center and color molded beadlock detail for a realistic look. Fully compatible with factory Traxxas and aftermarket 2.2/3.0 tires, the wheels feature 12mm hexes and the same offset as Slash 2wd rear wheels.
This product was added to our catalog on September 7, 2021
TRA6878, Traxxas Slipper Clutch, Complete (for Slash 4x4)
This slipper clutch comes completely assembled and ready to install into your 1/10 scale 4X4 vehicle. The slipper clutch can be used as a standard replacement for existing clutches, or as an upgrade for vehicles with a high-stall clutch.
The slipper clutch comes equipped with a pre-installed 54-tooth 32-pitch spur gear.
Replacement part for these models:
Rustler® 4X4
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
Stampede® 4X4
Accessory part for these models:
Ford® Fiesta® ST Rally
Rustler® 4X4
Ford® Fiesta® ST Rally
Rustler® 4X4 VXL
This product was added to our catalog on September 7, 2021
TRA6888, Traxxas Rear Center Drive Hub
This is a replacement Traxxas Center/Rear Drive Hub, and is intended for use with the Traxxas Slash 4x4 short course truck. This set includes one center rear hub, as well as one screw pin.
This product was added to our catalog on September 7, 2021
TRA6894, Traxxas Slash 4x4 LED Light Kit w/Front & Rear Bumpers
Traxxas Slash 4x4 LED Light Kit with Front and Rear Bumpers. These replacement bumpers is intended for the Traxxas Slash 4x4. Four LEDs are installed to the front bumper and two LEDs are installed to the rear bumper. The LEDs are factory installed and pre-wired for ease of use. Package includes one front bumper, one rear bumper, One Y-harness and hardware.
This product was added to our catalog on August 1, 2022
TRA6895, Traxxas Front Sway Bar Linkage (2)
Traxxas Rally
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 4x4
Traxxas Telluride 4x4
This product was added to our catalog on September 7, 2021
TRA6898, Traxxas Slash 4x4 Sway Bar Kit (Front/Rear)
This is an optional Traxxas Sway Bar Kit, and is intended for use with the Traxxas Slash 4x4 short course truck. This kit includes two front and two rear sway bars, as well as adjustable linkage and necessary hardware.
This product was added to our catalog on September 7, 2021
TRA6928, Traxxas Slash 4X4 Body Conversion Kit w/Body Mounts
raxxas Body Conv Kit Slash 4X4 F/R Body Mounts
This product was added to our catalog on September 7, 2023
TRA9069, Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty 12mm Wheel Hexes (4)
Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty 12mm Wheel Hexes. These wheel hexes are intended for the Traxxas Hoss 4x4, Rustler 4x4 or Slash 4x4 when equipped with the optional Traxxas Heavy Duty Upgrade Kit (TRA9080). Package includes four wheel hexes and four pins.
NOTE: These hexes are designed to be used with the TRA9080 upgrade kit only. They will not fit the factory suspension parts found on your model.
This product was added to our catalog on September 7, 2023
TRA9080, Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty Suspension Upgrade Kit (Black)
Traxxas Hoss
Traxxas Rustler 4x4
Traxxas Slash 4x4
The Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty Suspension Upgrade Kit has been designed to turn your ride into the ultimate bashing machine. This optional suspension upgrade kit is intended for the Traxxas Hoss 4x4, Rustler 4x4 and Slash 4x4. The kit uses fully updated suspension components, as well as Maxx Duty driveshafts with 6mm stub axles and steel wheel hexes.
NOTE: May not work with sway bars or other accessories.
Features:
Designed for the Traxxas Hoss 4x4, Rustler 4x4 and Slash 4x4 models
Adds extreme durability to your ride
Fully updated suspension components, drivelines and hexes
Available in multiple color options to best match your build
This item was added to our catalog February 21, 2024
TRA9837, Bumper mount (front (1)/ rear (1)) (fits #9834 bumpers)
Bumper mount (front (1)/ rear (1)) (fits #9834 bumpers)Replacement front and rear bumper mounts for 9812-series TRX-4M™ F-150® bodies
This product was added to our catalog on September 7, 2021
Traxxas Aluminum Center Driveshaft
his is a replacement Traxxas Aluminum Center Driveshaft, and is intended for use with the Traxxas Slash 4x4 short course truck.
This product was added to our catalog on September 7, 2021
Traxxas Slash 1/10 Pre-Cut Short Course Truck Body (Clear)
Traxxas® Slash® 1/10 Pre-Cut Short Course Truck Body. This is a replacement body intended for use on the Traxxas Slash 1/10 2WD Short Course Truck. Alternatively, it will also fit the Traxxas Slash 1/10 Ultimate, 4x4, and 4x4 VXL platforms. This body is clear and unpainted, allowing you to add your own custom paint scheme to your truck. It is pre-trimmed with body holes already drilled for a seamless fit with the clipless mounting system (sold separately*).
Note:
*This body has pre-drilled holes specifically designed for the Traxxas Clipless Body Mounts (TRA6967) and the Traxxas Slash Clipless Body Latch Mount Retainers Set (TRA6966) sold separately.
Painted body shown in the photos is for illustrative purposes only. The product you will receive is clear and unpainted.
Features:
Pre-cut for a precise fit
Made from durable, high-quality polycarbonate material
Unpainted finish allows you to customize the paint job
Includes an overspray film to protect the body during painting
Pre-cut window masks ensure clean and clear windows
Add finishing touches and enhance the visual appeal with included decals
Engineered specifically for the Traxxas Slash 1/10 scale chassis
Pre-drilled body holes ready for the clipless mounting system available separately
Specifications:
Scale: 1/10
Length: 21.13in (536.58mm)
Wheelbase: 13.2in (335mm)
Width: 11.75in (298.45mm)
Height: 5.75in (146.05mm)
Application: Short Course Truck
Includes:
(1) Traxxas Slash 1/10 Pre-Cut Short Course Truck Body
(1) Window Masking Sheet
(1) Decal Sheet
This product was added to our catalog on July 22, 2024
YEA-TRSL-015FBU, Yeah Racing Traxxas Slash/Stampede 4x4 HD Steel Front Drive Shafts (Blue)
The Yeah Racing Traxxas Slash/Stampede 4x4 HD Steel Front Drive Shafts are a great option for adding strength and style to your ride. The axle section and shaft are made from tool grade steel and the outer sleeve is made from aluminum to keep the weight low. These features allow for a great balance between weight and strength. Package includes two assembled drive shafts intended for the Traxxas Slash 4x4 or Stampede 4x4.Features:
Perfect fit for the Traxxas Slash or Stampede
Steel and aluminum construction
Center section is anodized aluminum to help keep weight down
This product was added to our catalog on December 16, 2021
