68154-4, Traxxas Slash BL-2S 1/10 RTR 4X4 Brushless Short Course Truck w/BL-2S ESC & TQ 2.4GHz Radio
The Traxxas Slash 1/10 RTR 4X4 Short Course Truck has been meticulously crafted for durability, performance, and pure enjoyment. Equipped with the formidable 3300kV brushless powerhouse and the rock-solid reliability of the BL-2S electronic speed control, the Slash fearlessly tackles every high-flying, fender-banging adventure you throw its way. Its water-resistant electronics ensure the fun continues even in wet weather. Grab your transmitter and brace yourself for thrilling dirt-roosting power slides.
The Slash boasts a resilient design, built on the proven modular tub chassis featuring a fully independent suspension with heavy-duty steel turnbuckles for precise camber and toe adjustments. Powering its dynamic performance is the BL-2S 3300kV Brushless motor, seamlessly connected to Traxxas's upgraded extreme heavy-duty drivetrain. To keep those wheels spinning, Maxx-Duty Traxxas driveshafts ensure reliable power transfer received from the sealed steel gear differentials, making every ride a thrilling experience!
The resilient clipless body of the Slash steadfastly endures the most rigorous actions, secured by robust latches that tightly grip the frame. These heavy-duty latches, while holding the body securely, effortlessly release within seconds, granting swift access to the chassis. The ingenious hidden latching system of the Slash eliminates the need for cumbersome body clips, replacing them with sizable reinforced panels designed to withstand pull-through damage, ensuring durability and convenience.
Features:
Clipless body mounting system
Fully adjustable steel turnbuckles
Robust and overbuilt 4WD drivetrain
Pr-installed Traxxas Extreme Heavy Duty Upgrade Kit
Lightning-fast BL-2S 3300kV brushless motor delivers blistering speeds!
Reliable Waterproof BL-2S Electronic Speed Control with three driving profiles
100% Fully assembled and Ready-To-Race
Specifications:
Scale: 1/10
Length: 22.4in (568mm)
Width: 11.65in (296mm)
Height: 7.60in (193mm)
Wheelbase: 12.75in (324mm)
Weight: 84.96oz (2408.5g)
Power Source: Electric
ESC Voltage:
NiMH: 6-7 Cell NiMH (7.2-8.4V)
LiPo: 2S LiPo (7.4V MAX)
Drive: 4WD
Gear Pitch: 32P
Gear Ratio: 11.82:1
Assembly Level: Ready To Run
Includes:
(1) Traxxas RTR BL-2S 4X4 Slash
(1) User Manual
Needed To Complete:
(1) 6-7 Cell NiMH Battery or 7.4V 2S Lipo Battery (MAX)
(1) Compatible Battery Charger
(4) AA Batteries for Transmitter
This product was added to our catalog on September 7, 2023
EXO2131, Exotek Slash 4X4 HD Steel Front CVD Set
Exotek Slash 4X4 HD Steel Front CVD Set. Designed to be an optional upgrade for the Traxxas Slash 4X4, Rally and Stampede 4X4 this CVD set is an excellent way to add durability to your vehicle. Constructed from high quality steel insures that this set will be reliable over the long run even with high power brushless systems. The updated differential cups use two set screws each to give ultra secure and reliable mounting.NOTE: Requires blue thread lock and cvd oil or grease (not included).Includes:
(2) 72mm CVD Axle Assemblies
(2) Differential Outdrives
(6) Set Screws
This product was added to our catalog on January 19, 2022
EXO2132, Exotek Slash 4X4/2WD HD Steel Rear CVD Set
Exotek Slash 4X4/2WD HD Steel Rear CVD Set. Designed to be an optional upgrade for the Traxxas Slash 4X4, Slash 2WD, Rally and Stampede 4X4 this CVD set is an excellent way to add durability to your vehicle. Constructed from high quality steel insures that this set will be reliable over the long run even with high power brushless systems. The updated differential cups use two set screws each to give ultra secure and reliable mounting.
NOTE: Requires blue thread lock and cvd oil or grease (not included).
Includes:
(2) 76mm CVD Axle Assemblies
(2) Differential Outdrives
(6) Set Screws
This product was added to our catalog on May 19, 2021
HRASJT254, Hot Racing Traxxas 32P Steel Spur Gear (Silver) (54T)
This is the Hot Racing Steel 32 Pitch, 54 Tooth Spur Gear with Silver hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4.
Features:
CNC machined and lightened hardened steel construction
Black oxide coating for durability and corrosion resistance
Silver-colored countersunk washers
Specifications:
Number of Teeth: 54
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: 6mm (0.24 inch)
Internal diameter: ~11mm (~0.43 inch)
Includes:
54 tooth 32 pitch spur gear
(3) mounting screws
(3) silver-colored countersunk washers
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
Requires:
Hardened clutch bell or pinon gear
Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
This product was added to our catalog on May 16, 2021
HRASLF10X08, Hot Racing Traxxas Slash 4x4 Aluminum 12mm Hex Wheel Extensions (Silver) (28mm)
Hot Racing Traxxas Slash 4x4 Aluminum 12mm Hex Wheel Extensions add 28mm of width to the Traxxas Slash 4X4, Stampede 4X4, and Rally vehicles with 5mm diameter outer stub axles.Features:
Extends the width of your buggy or truck for a wider stance and greater control
Fits over axles and secures in place with included pins and setscrews
Specifications:Length: (28mm) from the back of the hub to the front of the hex portionHex size: 12mmAxle diameter: 5mmCross pin diameter: 2mm
This product was added to our catalog on December 16, 2021
HRASLF117X06, Hot Racing Traxxas Slash 4x4 Light Weight Splined 17mm Hubs
Hot Racing Traxxas Slash 4x4 Light Weight Splined 17mm Hubs. These optional 17mm hex hub wheel adapters fit the Traxxas Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +6mm/side.
Features:
Black anodized CNC machined aluminum hex adapter
Blue anodized CNC machined 17mm wheel net with integrated o-ring to prevent nut from backing off
Mates to Traxxas stub axle using 2mm axle pin and M4 wheel nut
Replaces Traxxas 1654 12mm wheel hex
Specifications:
Offset from stock wheel hex: +6mm/side
Total length: 21.5mm
Hex: 17mm
Includes:
(4) 17mm hex hubs
(4) 17mm hex wheel nuts
(4) M4 wheel barrel nuts
(4) 2x9.7mm axle pins
(1) 4mm hex wrench
NOTE:
Use a removable thread lock on axle barrel nuts
Replacement M4 Wheel Barrel Nut Fastener is Hot Racing HRARSSLF117X
This product was added to our catalog on March 30, 2022
HRASLF288RCF, Hot Racing Traxxas Slash 4x4 Front Light Weight Metal CV Splined Drive Shaft
This is a set of Hot Racing Traxxas Slash 4x4 Light Weight Front Metal CV Splined Drive Shafts, an optional upgrade heavy duty splined star drive axle kit for the Traxxas electric Stampede 4X4, Slash 4x4, Rustler 4X4 models.
Features:
CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum construction
Replaces factory plastic drive axles
Hard Black Anodized Aluminum Slider
Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
Design eliminated CV pin setscrew
Hardened S2 Spring steel wheel shaft
#45 Steel is black finish S2 spring in Brown finish
Rubber dust boot to keep the Splined Drive for maximum protection against the elements
Replaces factory plastic Traxxas parts
Specifications:
Approximate overall collapsed length: 112mm
Includes:
(2) Front Cv Splined Drive Shaft spline CVD shaft assemblies
(2) M4x2.5x11mm screw shafts
This product was added to our catalog on December 16, 2021
HRASLF288RCR, Hot Racing Slash 4x4 Rear Light Weight Metal CV Splined Drive Shaft Set
Traxxas Rustler 4x4
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Stampede 4x4
This is a replacement Hot Racing Slash Rear Light Weight Metal CV Splined Drive Shaft Set for the Slash, Slash 4X4, Stampede 4X4 and Rustler 4X4.
Features:
CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum construction
Replaces factory plastic drive axles
Hard Black Anodized Aluminum Slider
Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
Design eliminated CV pin setscrew
Hardened S2 Spring steel wheel shaft
#45 Steel is black finish S2 spring in Brown finish
Rubber dust boot to keep the Splined Drive for maximum protection against the elements
Includes:
(2) Rear Cv Splined Drive Shaft spline CVD shaft assemblies
(2) M4x2.5x11mm screw shafts
Specifications:Approximate overall collapsed length: 113mm
NOTES:
Replaces factory plastic Traxxas parts
Replacement parts include: SLD425 (M4x2.5x11mm screw shafts)
This product was added to our catalog on December 16, 2021
HRASLF311, Hot Racing Traxxas Slash 4x4 Front & Rear Sway Bar
Hot Racing Traxxas Slash 4x4 Front & Rear Sway Bar. This is an optional front and rear sway bar set for the Traxxas Slash 4x4, Slash 4x4 LCG, and 1/10 Rally vehicles.
NOTE: Requires Traxxas TRA3932 for mounting the wire
Features:Adjustable spring steel sway bar wireA set of three sway bars for a wider range of adjustment to suit the current track conditionChrome 2mm (hard) (stock black)Blue 1.8mm (med) (stock silver)Red 1.6mm (soft)Includes:(2) soft red anti-roll bars(2) medium blue anti-roll bars(2) hard chrome anti-roll bars(4) push rods with ball end
This product was added to our catalog on December 16, 2021
HRASLF311E, Hot Racing Front/Rear Sway Bar Kit
These are the optional Hot-Racing Front and Rear Sway Bar Kit for the 1/10 scale Traxxas 4x4 Slash, Slash LCG and Rally Vehicles. jxs 06/23/15 ir/jxs
Traxxas Rally
Traxxas Slash 4x4
This product was added to our catalog on December 16, 2021
HRASLF4801, Hot Racing Traxxas Slash 4x4 Adjustable Steering Bellcrank & Servo Saver
The Hot Racing Traxxas Slash 4x4 Adjustable Steering Bellcrank & Servo Saver is an optional upgrade for the 1/10 Traxxas Rally 4X4, Slash 4X4, and Stampede 4X4.
Features:
CNC machined aluminum construction
Adjustable spring loaded steering arm protects servo gears during impact
NOTE:
Reuses stock steering bellcrank bearing
Recommended to use a removable thead-locking adhesive on screws threading into metal
Using a high pressure grease on the servo saver cam surfaces can smooth the servo saver action
This product was added to our catalog on December 16, 2021
HRASSLF254D, Hot Racing Steel Center Diff Spur Gear 32P 54T 0.8m
This is the Hot Racing 54 Tooth Center Diff Spur Gear for the 1/10 scale Traxxas Slash 4x4, or Stampede with Center Diff.
Traxxas Slash 4x4
Traxxas TRX-4
This product was added to our catalog on December 16, 2021
HRASSLF254X, Hot Racing Traxxas Slash Super Duty Slipper Spur Gear (54T)
The Hot Racing Traxxas Slash Super Duty Slipper Spur Gear is an excellent way to add durability and performance to the Slash 4x4. Using a steel 32P spur gear and upgraded slipper unit this kit can handle some of the most high performance power systems.
NOTE: Replaces Traxxas stock slipper unit.
Features:
Hardened steel gear and slipper wear surface increase durability and add long life
Cross-drilled and vented gear to reduce rotational mass and help dissipate heat
Aluminum slipper back plate, cross-drilled for reduced rotating mass and heat dissipation
Metallic slipper pad provides an excellent balance of friction and wear resistance
Ball bearing hub for reduced friction
Designed to handle Traxxas VXL brushless power
Specifications:
Gear: 54T, 32P (mod 0.8)
Outer Diameter: 44.5mm
Inner Diameter: 5mm
Weight 47g
Included:
(1) 54T Spur Gear
(1) Aluminum Back Plate
(1) Slipper Pad
(1) 7x13x4mm Ball Bearing
(1) Aluminum Bushing
This product was added to our catalog on November 2, 2023
HRATE48X01, Hot Racing Traxxas Slash Aluminum Steering Bellcrank w/Servo Saver
Hot Racing Traxxas Slash Aluminum Steering Bellcrank with Servo Saver. This optional steering bell crank is intended for the Traxxas Slash, Stampede, Rustler or Bandit. Package includes one steering bellcrank.Features:
Fully adjustable servo saver
Made with CNC-machined 6061 aluminum
Adjustable servo saver springs for different tension
Full ball bearing operation for ultra smooth steering
This product was added to our catalog on December 16, 2021
HRATRX15EPL06, Hot Racing Traxxas Slash 4x4 Power Up Gear Adapter (Short)
Fits:
Traxxas E-Maxx
Traxxas E-Revo
Traxxas Rally
Traxxas Revo Nitro
Traxxas Slash 4x4
Traxxas Slayer
Traxxas Stampede 4x4
Traxxas Summit 1/10
Traxxas T-Maxx
This product was added to our catalog on May 16, 2021
RCE1849BL, Slash 2/4WD Aluminum Front Shock (pr) - Blue
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment. Replaces the kit plastic shocks (TRA3760).
Firm Springs Included
Specifications:
Spring Length: 57mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
RCE1849RD, Slash 2/4WD Aluminum Front Shock (pr) - Red
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment. Replaces the kit plastic shocks (TRA3760).*Firm Springs Included
Specifications:
Spring Length: 57mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
RCE1850BL, Slash 2/4WD Aluminum Rear Shock (pr) - Blue
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment.*Firm Springs Included
Specifications:
Spring Length: 66mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
RCE1850R, Slash 2/4WD Aluminum Rear Shock (pr) - Red
Slash 2/4WD Aluminum Rear Shock (pr) - Red
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment.
Specifications:
Spring Length: 66mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
RCZTRA060, RC Screwz Traxxas Slash 4x4 TSM/OBA Stainless Screw Kit
RCScrewz Traxxas Slash 4x4 Stainless Steel Screw Kits are 100% complete. Your kit will include everything needed to do a full conversion and more. Stainless Steel Screw Kits are far superior to the screws that come stock with your RC. RCScrewz kits are made with the best stainless steel money can buy. No more bent, rusted, or corroded screws. Never worry about stripped heads again. You will not find a better screw kit for your RC at any price and RCScrewz Guarantee's it. If for any reason your not 100% satisfied with your kit, return your screw kit to RCScrewz and they will send you a full refund for the price of the kit.
All RCScrewz Kits include:
All socket screws + Extras
Button Screws + Extras
Flat Head Screws + Extras
Set Screws + Extras
Nuts + Extras
Washers + Extras
Bondhus Short Arm hex Wrenches All Sizes
Quality Reusable plastic pit case
General Screw Installation & Notes: Use either a wax or grease on the threads to help prevent stripping while going into new or hard material. Some screws that are included in the these kits remain phillips heads but are still stainless steel. This has been done for strength, as a result of field testing, on small diameter screws (2mm and 2-56" dia). This may include some chassis screws and differential screws. All other remain socket head.
This product was added to our catalog on December 16, 2021
Revolution Design Traxxas Slash 4X4 Ultra Bearing Set. This optional bearing set is intended for the Traxxas Slash 4X4. Precision made, these bearings are designed to perform at their best no matter the conditions. Package includes one complete bearing set.
RPM70392, Front Shock Tower, Black: SLH 4x4, ST 4x4
Traxxas Rally
Traxxas Slash 4x4
Traxxas Stampede 4x4
This product was added to our catalog on December 16, 2021
RPM70652, RPM Slash LCG 4x4 & Rally Nerf Bar Set (Black)
This is an optional RPM Slash LCG 4x4 & Rally Nerf Bar Set. The chassis layouts of the 1/10th scale Rally LCG & Slash 4x4 LCG changed the original design of the stock nerf bars, making the RPM80622 & RPM80625 nerf bars unusable. These LCG nerf bars fix that problem and are a direct, perfect fit!
RPM LCG Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to Black Nerf Bars for the 1/10th Rally, LCG Slash 2wd & LCG Slash 4x4. The additional cross bracing optimizes the rigidity while absorbing additional impact energy anything less than RPM would have crumpled under!
RPM Nerf Bars are stock replacement parts and work with all stock Traxxas chassis nerf bars TRA7423. RPM Nerf Bars are proudly made in the USA, molded in either blue or black from our engineering grade nylons and backed by our limited lifetime warranty against breakage.
Features:
Available in Black and Blue
This product was added to our catalog on July 31, 2021
RPM80702, RPM Traxxas Slash 4x4 Front or Rear A-arms (Black)
RPM A-arms for the Traxxas Slash 4x4 are everything you’ve come to expect from RPM and more!
Features:
They eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, they cut 6.5 grams of weight off of each A-arm! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions!
We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over the RPM traditional look with our 30 degree leading and trailing edges, and huge bosses for the shock and sway bar mounts. Additionally, you now have the option of a bit of color with either blue or black to choose from.
RPM A-arms are molded in RPM trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA!
This product was added to our catalog on March 2, 2021
TFE2190, FastEddy Traxxas Slash 4X4 RTR TQi Bearing Kit
Team FastEddy Traxxas Slash 4X4 RTR TQi Bearing Kit. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(6) 5x11x4
(5) 10X15x4
(4) 6X12x4
(4) 5X8x2.5
(2) 12X18x4
(2) 8X16x5
(2) 5X10x4
This product was added to our catalog on December 16, 2021
TKR6837, Tekno RC Nylon M6 Driveshaft Steering Block Set (2)
Front steering blocks for the Tekno RC M6 Driveshafts for Slash and Slash 4×4. Molded nylon composite for incredible strength and light weight. Added bump steer holes for better fine tuning the handling of your vehicle. Increased outer bearing size for increased durability.
Note: These are meant to be used with the Tekno RC M6 (6mm) Driveshafts and stub axles. These are not a direct stock replacement unless you are using the M6 Driveshafts.
This product was added to our catalog on December 16, 2021
TRA1952X, Traxxas Aluminum Rear Stub Axle Carriers (Blue) (2)
This is a set of two optional Traxxas Rear Stub Axle Carriers and are intended for use with the Traxxas Slash 4x4, Nitro Rustler, Nitro Stampede and Nitro Sport. These will not only add strength to the rear suspension of your Traxxas Truck, these high quality CNC machined 6061-T6 aluminum axle carriers will help to give your ride a "Pro" Truck look.
Includes:
(2) Aluminum Rear Stub Axle Carriers
(2) 3x3mm Set Screws
(2) 3x12mm Flat Head Phillips Screws
(2) 3x31.5mm Pins
(6) 6mm E-Clips
This product was added to our catalog on May 7, 2021
TRA3655X, Traxxas Suspension Arms
This is a set of replacement Traxxas Suspension Arms, and are intended for use with the Traxxas Slash 4x4 short course truck. The suspension arms are supported on the chassis by the hinge pins and are the mounting point for the lower shock ends, as well as the axle carriers.
Replacement part for these models:
Traxxas Rally
Traxxas Rustler 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 2wd
Traxxas Stampede 4x4
Traxxas XO-1
This product was added to our catalog on May 7, 2021
TRA3739, Traxxas Screw Pin Set
This is a replacement suspension screw pin set from Traxxas. These suspension screw pins are used where the suspension arms pivot.
Fits:
Traxxas Bandit
Traxxas Hoss
Traxxas Nitro Slash
Traxxas Rally
Traxxas Rustler 2wd
Traxxas Rustler 4x4
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 2wd
This product was added to our catalog on April 12, 2021
TRA5827X, Traxxas Battery Expansion Hold Down Retainer Kit
This is an optional Traxxas Battery Hold Down Retainer. This extended battery strap for the Slash and Slash 4x4 allows the use of LiPo packs up to 42mm tall in the stock battery tray. Package includes the battery strap, battery strap retainer, battery post, foam spacer and an angled body clip.
This product was added to our catalog on September 7, 2021
