58276-74, Traxxas Slash VXL 1/10 RTR 2WD Short Course Truck w/Magnum 272R, TQi 2.4GHz Radio & TSM
The Traxxas Slash VXL 1/10 RTR 2WD Short Course Truck has been designed to give you the look and feel of the intense, high flying off road action. Since its introduction, the Slash has set the standard for durability, performance, and technology. Build on the proven Slash chassis, this short-course truck has been given the Traxxas Magnum 272R transmission. The all metal gear transmission is used to deliver competition grade performance to your Slash VXL.
At first glance, this Traxxas Slash chassis features an updated dual-bellcrank steering, updated heavy duty driveshafts, sealed beveled gear differential, torque control slipper and oil filled ultra shocks. Powering this chassis is the reliable Velineon Brushless Power System. The VXL-3S ESC supports up to a 3S LiPo and comes in a waterproof case. The Velineon 3500 Motor has been optimized for power and efficiency is 1/10th scale vehicles.
Features:
Magnum 272R transmission
Aluminum motor plate
All-metal internal gears
Sealed beveled-gear differential
ProGraphix paint
Velineon brushless power system
Traxxas Stability Management TSM
TQi 2.4GHz transmitter and receiver
Waterproof electronics
Digital high-torque waterproof steering servo
Precision steel turnbuckles with heavy-duty rod ends
100% Fully assembled and Ready-To-Race
Specifications:
Length: 22.4 inches (568 mm)
Front Track: 11.65 inches (296 mm)
Rear Track: 11.65 inches (296 mm)
Wheelbase: 13.2 inches (335 mm)
Height (overall): 8.43 inches (214 mm)
Weight: 90.4 ounces (2.56 kg)
Front Tires: Slash 2.2 (Pre-Glued with Inserts)
Rear Tires: Slash 2.2 (Pre-Glued with Inserts)
Front Wheels: 2.2" Satin or Chrome-Finish
Rear Wheels: 2.2" Satin or Chrome-Finish
Gear Ratio (internal): 2.72 (final drive: 10.2)
Gear Pitch: 48-Pitch
Center Ground Clearance: 3.5 inches (89 mm)
Top Speed: 60+mph (with 3S 5000mAh LiPo Battery, 31T Pinion and 76T Spur)
Skill Level: 1
Battery Tray Dimensions: 165x49.5x23mm
Includes:
(1) Traxxas Slash VXL 1/10 RTR 2WD Short Course Truck
Needed to Complete:
6 to 7 cell NiMH or 2S/3S LiPo battery & Charger with Traxxas iD connectors
(4) "AA" batteries for transmitter
This product was added to our catalog on July 7, 2022
68154-4, Traxxas Slash BL-2S 1/10 RTR 4X4 Brushless Short Course Truck w/BL-2S ESC & TQ 2.4GHz Radio
The Traxxas Slash 1/10 RTR 4X4 Short Course Truck has been meticulously crafted for durability, performance, and pure enjoyment. Equipped with the formidable 3300kV brushless powerhouse and the rock-solid reliability of the BL-2S electronic speed control, the Slash fearlessly tackles every high-flying, fender-banging adventure you throw its way. Its water-resistant electronics ensure the fun continues even in wet weather. Grab your transmitter and brace yourself for thrilling dirt-roosting power slides.
The Slash boasts a resilient design, built on the proven modular tub chassis featuring a fully independent suspension with heavy-duty steel turnbuckles for precise camber and toe adjustments. Powering its dynamic performance is the BL-2S 3300kV Brushless motor, seamlessly connected to Traxxas's upgraded extreme heavy-duty drivetrain. To keep those wheels spinning, Maxx-Duty Traxxas driveshafts ensure reliable power transfer received from the sealed steel gear differentials, making every ride a thrilling experience!
The resilient clipless body of the Slash steadfastly endures the most rigorous actions, secured by robust latches that tightly grip the frame. These heavy-duty latches, while holding the body securely, effortlessly release within seconds, granting swift access to the chassis. The ingenious hidden latching system of the Slash eliminates the need for cumbersome body clips, replacing them with sizable reinforced panels designed to withstand pull-through damage, ensuring durability and convenience.
Features:
Clipless body mounting system
Fully adjustable steel turnbuckles
Robust and overbuilt 4WD drivetrain
Pr-installed Traxxas Extreme Heavy Duty Upgrade Kit
Lightning-fast BL-2S 3300kV brushless motor delivers blistering speeds!
Reliable Waterproof BL-2S Electronic Speed Control with three driving profiles
100% Fully assembled and Ready-To-Race
Specifications:
Scale: 1/10
Length: 22.4in (568mm)
Width: 11.65in (296mm)
Height: 7.60in (193mm)
Wheelbase: 12.75in (324mm)
Weight: 84.96oz (2408.5g)
Power Source: Electric
ESC Voltage:
NiMH: 6-7 Cell NiMH (7.2-8.4V)
LiPo: 2S LiPo (7.4V MAX)
Drive: 4WD
Gear Pitch: 32P
Gear Ratio: 11.82:1
Assembly Level: Ready To Run
Includes:
(1) Traxxas RTR BL-2S 4X4 Slash
(1) User Manual
Needed To Complete:
(1) 6-7 Cell NiMH Battery or 7.4V 2S Lipo Battery (MAX)
(1) Compatible Battery Charger
(4) AA Batteries for Transmitter
This product was added to our catalog on September 7, 2023
EXO1985, Exotek Traxxas Slash/Bandit "Vader" Drag Race Chassis Conversion
TX Vader Drag Chassis Conversion, for the 2wd Slash / Bandit
TX VADER drag chassis conversion set.
Lightweight 'street eliminator' drag chassis conversion set for use with TRAXXAS 2WD SLASH OR BANDITS KITS.
Converts your Slash to be cash race ready for the hot 'Street Eliminator No Prep' race classes springing up around the US.
Provides the legal 13" wheelbase to fit under the hottest new no prep bodies that are on the market.
Based on the excellent handling and proven 22 VADER design.
This pro chassis conversion set features
- Carbon fiber made and machined in USA
- Heavy duty 2.5mm thick chassis and side rail plates
- Centralized servo mounting for improved balance
- Alloy servo mounting block that ties into the side rails for extra rigid and tweak free front chassis setup
- Modular chassis design- allows standard rear motor or optional mid motor gear box placement (see instructions for build notes)
- 6 heavy duty alloy side rail posts
- Pro AE B6 style full ball bearing supported steering rack and crank set
- Includes 25 spline clamping alloy servo horn (25 spline servo required like the Traxxas servo etc.)
- Alloy parts are finished in glossy black with blue chamfers for that factory racing look
- Carbon fiber top bulkhead plate
- Multi position shorty lipo mounting to adjust for wheelie/ no wheelie balance
- 2 level chassis design allows you to lower or raise the center of gravity for stability yet keeps the gear box higher to increase traction and keep the drive axles straighter for higher speeds
- The 2 layer rear chassis also raises the rear roll center which increases the forward launch traction while reducing side to side roll for improved high speed stability.
- Offers multiple weight balance options to maximize grip on the street or on the track
- Includes steel hex hardware (requires high quality metric hex tools, 2.0 & 2.5mm)
- Includes a lipo hold set
- Includes large Exotek logo stickers
- Includes instruction sheet
Other option parts shown not included.
Wheelie bar shown is not included.
Requires assembly. Shown assembled for display purposes only
Also required:
Traxxas 2wd SLASH or BANDIT kit
Traxxas body mount set TRA1914R
Traxxas toe link set TRA3745 or TRA3139A (2 sets needed)
This product was added to our catalog on December 16, 2021
EXO2131, Exotek Slash 4X4 HD Steel Front CVD Set
Exotek Slash 4X4 HD Steel Front CVD Set. Designed to be an optional upgrade for the Traxxas Slash 4X4, Rally and Stampede 4X4 this CVD set is an excellent way to add durability to your vehicle. Constructed from high quality steel insures that this set will be reliable over the long run even with high power brushless systems. The updated differential cups use two set screws each to give ultra secure and reliable mounting.NOTE: Requires blue thread lock and cvd oil or grease (not included).Includes:
(2) 72mm CVD Axle Assemblies
(2) Differential Outdrives
(6) Set Screws
This product was added to our catalog on January 19, 2022
EXO2132, Exotek Slash 4X4/2WD HD Steel Rear CVD Set
Exotek Slash 4X4/2WD HD Steel Rear CVD Set. Designed to be an optional upgrade for the Traxxas Slash 4X4, Slash 2WD, Rally and Stampede 4X4 this CVD set is an excellent way to add durability to your vehicle. Constructed from high quality steel insures that this set will be reliable over the long run even with high power brushless systems. The updated differential cups use two set screws each to give ultra secure and reliable mounting.
NOTE: Requires blue thread lock and cvd oil or grease (not included).
Includes:
(2) 76mm CVD Axle Assemblies
(2) Differential Outdrives
(6) Set Screws
This product was added to our catalog on May 19, 2021
HRASJT253, Hot Racing Traxxas 32P Steel Spur Gear (Grey) (53T)
This is the Hot Racing Steel 32 Pitch, 53 Tooth Spur Gear with grey hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4.
Features:
CNC machined and lightened hardened steel construction
Black oxide coating for durability and corrosion resistance
Grey-colored countersunk washers
Specifications:
Number of Teeth: 53
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: 6mm (0.24 inch)
Internal diameter: ~11mm (~0.43 inch)
Includes:
54 tooth 32 pitch spur gear
(3) mounting screws
(3) grey-colored countersunk washers
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
Requires:
Hardened clutch bell or pinon gear
Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
This product was added to our catalog on December 16, 2021
HRASJT254, Hot Racing Traxxas 32P Steel Spur Gear (Silver) (54T)
This is the Hot Racing Steel 32 Pitch, 54 Tooth Spur Gear with Silver hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4.
Features:
CNC machined and lightened hardened steel construction
Black oxide coating for durability and corrosion resistance
Silver-colored countersunk washers
Specifications:
Number of Teeth: 54
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: 6mm (0.24 inch)
Internal diameter: ~11mm (~0.43 inch)
Includes:
54 tooth 32 pitch spur gear
(3) mounting screws
(3) silver-colored countersunk washers
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
Requires:
Hardened clutch bell or pinon gear
Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
This product was added to our catalog on May 16, 2021
HRASLF288RCR, Hot Racing Slash 4x4 Rear Light Weight Metal CV Splined Drive Shaft Set
Traxxas Rustler 4x4
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Stampede 4x4
This is a replacement Hot Racing Slash Rear Light Weight Metal CV Splined Drive Shaft Set for the Slash, Slash 4X4, Stampede 4X4 and Rustler 4X4.
Features:
CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum construction
Replaces factory plastic drive axles
Hard Black Anodized Aluminum Slider
Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
Design eliminated CV pin setscrew
Hardened S2 Spring steel wheel shaft
#45 Steel is black finish S2 spring in Brown finish
Rubber dust boot to keep the Splined Drive for maximum protection against the elements
Includes:
(2) Rear Cv Splined Drive Shaft spline CVD shaft assemblies
(2) M4x2.5x11mm screw shafts
Specifications:Approximate overall collapsed length: 113mm
NOTES:
Replaces factory plastic Traxxas parts
Replacement parts include: SLD425 (M4x2.5x11mm screw shafts)
This product was added to our catalog on December 16, 2021
HRASTE282RP, Hot Racing Traxxas Slash Steel CV Drive Shafts
The Hot Racing Traxxas Slash Steel CV Drive Shafts are an excellent way to increase the reliability of your Traxxas Slash 2wd. Made with high strength steel these shafts offer higher strength over the stock plastic shafts along with smoother operation due to the CV (constant velocity) joint. Package includes two assembled steel CV drive shafts and two differential drive cups.
This product was added to our catalog on May 16, 2021
HRASTE288RC, Hot Racing Traxxas Slash Rear Light Weight CV Splined Drive Shaft (2)
This is a set of Hot Racing Traxxas Slash Rear Light Weight CV Splined Drive Shafts, intended for use with the Traxxas electric Stampede and Rustler models. This is an optional upgrade heavy duty splined star drive axle kit.
Features:
CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum construction
Replaces factory plastic drive axles
Hard Black Anodized Aluminum Slider
Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
Design eliminated CV pin setscrew
Hardened S2 Spring steel wheel shaft
#45 Steel is black finish S2 spring in Brown finish
Rubber dust boot to keep the Splined Drive for maximum protection against the elements
Replaces Traxxas TRA1951 half shafts, TRA2753X stub axles, and TRA4628 output yokes
Specifications:
Approximate overall collapsed length: 109mm
Includes:
(2) Rear Cv Splined Drive Shaft spline CVD shaft assemblies
(2) M4x2.5x11mm screw shafts
Fits:
Traxxas Rustler 2wd
Traxxas Stampede 2wd
This product was added to our catalog on December 16, 2021
HRATE117FL, Hot Racing Traxxas Slash 17mm Aluminum Hubs (F+3mm)
Hot Racing Traxxas Slash 17mm Aluminum Hub adapters for the Traxxas Electric Rustler, Slash, and Stampede 2WD vehicles are a great upgrade that will add approximately 4mm of width to the track width, helping to improve performance.
Features:
CNC machined 6061-T6 aluminum construction
17mm wheel nuts with o-ring grip
Adapters are anodized black in color, wheel nuts are anodized vibrant blue
Wheel mounting surface is approximately 4mm wider per side when compared to using the stock Traxxas TRA3654 hex hubs
Includes:
(2) Rear wheel adapters
(2) Front +3mm Wheel Adapters
(4) wheel nuts
(4) axle hub barrel nuts
(4) axle pins
(1) hex wrench
This product was added to our catalog on December 16, 2021
HRATE311PR, Hot Racing Traxxas Slash Sway Bar Push Rod (Blue) (2)
The Hot Racing Traxxas Slash Sway Bar Push Rod set is a replacement for Traxxas Slash 2wd trucks equipped with the Hot Racing HRATE311SLC sway bar kit.
Features:
Nylon rod ends
Blue anodized center aluminum spacer
Aluminum pivot balls on one side, steel pivot ball stud on the other
Use with Hot Racing HRATE311SLC Sway Bar
Specifications:
Overall length: 43mm
Length on centers: 32.5mm
This product was added to our catalog on December 16, 2021
JCO0365, 1955 Chevy Bel Air Street Eliminator Drag Racing Body (Clear)
The JConcepts 1955 Chevy Bel Air Street Eliminator Drag Racing Body is a no prep replica of one of the most popular cars in the door slammer racing since. Taking on this project was not an effortless task, doing a great deal of R&D, the team went for the more race inspired style and decided to split up the design into 3 different parts. First, the main Bel Air shell has been carefully crafted via CAD and hand shaped and finish to realize the many details found on the 1955. The stunning looks, slightly modified for drag racing, create a low-profile build, racy, laid-back front grille and unmistakable front headlight section.
JConcepts has designed the entire race body with the shoebox look as it was called in the 50’s. Along with the flatter straighter panels, the '55 also has modern cues like wrap-around glass on the windshield, and tail lights that jut outward. The body shell has built-in trim along the main panels which can be painted and detailed by the user to emulate the real steel. In the rear, the drop-dome roof glides toward the trunk deck which allows the 2-piece spoiler package to drop into place.
Sculpted and abbreviated (race-style) bumpers are molded with the body and just like all the rest, can be painted as desired. The front hood-scoop is a separate polycarbonate piece which has a special form just to under-cut and look the size and shape as a 1:1 counterpart. Slight fender flares give the user a hint of trimming direction for the 13” wheelbase and wheel well openings. The trim lines throughout the body provide a low-profile appearance and steady guide for a clean overall look.
Included in each body set, a 1955 Chevy Bel Air decal sheet, rear wing option including lower support and upper wing spoiler and the paint mask for all windows. A front hood-scoop is also part of each body set and ready for trim, fit and finishing. As always, each body set is backed with JConcepts customer support and racing heritage.
The Chevy Bel Air measures a 13.00" wheelbase and the inside dimensions of the body are 11.25" wide front and 12.00" rear. The body is built for a 2wd SCT wheelbase length and narrowed to more resemble the original 1:1 counterpart. It's helpful to plan your build, take measurements and modify your platform to fit inside the boundaries of the Chevy body.
NOTE:
The rear wing consists of two pieces, the lower section is designed with an L-shape with support ribs which require double-sided tape (not included) to attach to the back of the trunk lid. Once base is attached, apply more double-sided tape to match locations on the top wing and drop the main wing down into place. The hood-scoop is also applied with double-sided tape and it can be applied by installing 1 small strip of tape on both sides of the scoop. To finish, flex the scoop out and drop down and press firmly against tape. Photos show body mounted on Team Associated DR10.
Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Features:
1955 Chevy Bel Air drag racer faithful representation
Two-piece rear wing for street elimination competition
Fits an assortment of SCT length trucks with width modifications
Decal sheet with Chevy, Bel Air and JConcepts badges
Officially licensed by Chevrolet to JConcepts
JCO0418, JConcepts 2019 Cadillac ATS-V Street Eliminator Drag Racing Body (Clear)
The JConcepts 2019 Cadillac ATS-V Street Eliminator Drag Racing Body is a great way to add customization and a personalized flair to your Street Eliminator set-up.
The ATS-V is Cadillac's vigorous, brawny contender, eager to represent against all other performance rides. JConcepts took on recommendations from racers and dove into a project utilizing the coupe style vehicle for the drag racing community. The Cadillac features a V-forged front-end with details chiseled into the headlight area which draws up the fender and over the hood. Undercuts throughout the nose culminate at the bottom with built-in splitter and recess vents. The included front hood-scoop brings a drag racing flair and blends up to the gradually shaped windshield. The roof is slightly railed, channeling the air over the rear-end and coupe section down to the trunk-lid. Fender flares protrude from the main body shape blend into the railed and splitter along the rocker-panels. The rear trunk cover fits and flows around the back to a recessed center section and allows perfect positioning of the rear taillights. The included taillight decals fold around the individual sections of the quarter-panels to provide that all-important Cadillac look. An included lower support structure and upper top wing is included to bring out another side to the Cadillac which is a drag racing animal. Included in each body set, a 2019 Cadillac ATS-V decal sheet and the paint mask for all windows.
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Features:
2019 Cadillac ATS-V faithful representation
Direct fit for Team Associated DR10
Sized for an assortment of SCT length trucks with width modifications
Rear trunk deck spoiler with lower support structure
Decal sheet with Cadillac and JConcepts badges.
Officially licensed by Chevrolet to JConcepts.
Specifications:
Wheelbase: 13.00"
Inside Dimensions:
Front: 11.50"
Rear: 12.00”
This product was added to our catalog on December 16, 2021
JCO29102, JConcepts DR10/SR10 +2 Aluminum "Honeycomb" Motor Plate (Black)
The JConcepts DR10/SR10 +2 Aluminum "Honeycomb" Motor Plate, is a great way to add strength and allow for more gearing on your Team Associated DR10 or SR10. This motor plate features longer slots allowing for taller pinion sizes to be used. Made from 3mm thick aluminum with a distinct honeycomb patter machined to aid in heat dissipation, weight reduction and style. Package includes one motor plate.
Features:
Precision machined aluminum
Durable honeycomb milling
Longer slots allows for larger pinions
3mm thickness material
Chamfer highlight edging
Anodized Black
This product was added to our catalog on October 8, 2021
PRO2803-03, 1/10 Showtime Front Runner Front 2.2"/2.7" 12mm Drag Wheels (2) Black
Fits:
Losi® 22S™ No Prep Drag Car (LOS03035/LOS03041) Front with Pro-Line's Front Runner 2.2"/2.7" Tires (PRO10197203)
Slash® 2wd Front with Pro-Line's Front Runner 2.2"/2.7" Tires (PRO10197203)
AE DR10 Front with Pro-Line's Front Runner 2.2"/2.7" Tires (PRO10197203)
Slash® 4x4 Front with Pro-Line's Front Runner 2.2"/2.7" Tires (PRO10197203)
The Pro-Line Showtime Front Drag Racing Wheels with 12mm Hex are a performance driven wheel that will aid acceleration by removing some excess rotational mass. These wheels have been designed to be as narrow and lightweight as possible, all without taking away from the scale appearance. The outer bead is a standard 2.2", while the inner bead is a 2.7". When combined with the Pro-Line Front Runner Tires (PRO10197-203), expect nothing but performance and great scale looks. NOTE: Requires the use of the Pro-Line Front Runner Tires (PRO10197-203).Features:
Scale Spoke Pattern Mimics Full-Size Drag Wheels
Perfect fit for the Pro-Line's Front Runner Tires (PRO10197-203)
Super Narrow and Lightweight
Eliminates the Need for Tire Foam
Made in the USA
Specifications:
Scale: 1/10
Wheel Type: Showtime Front Runner
Wheel Position: Front
Package Type: Wheels Only
Track Surface: Drag Racing
Wheel Hex Size: 12mm
Outer Diameter: 2.2" (56 mm)
Product Height: 3.04" (77 mm)
Product Width: 0.55" (14 mm)
Includes:
(2) Showtime Front Runner Wheels
This product was added to our catalog on July 4, 2021
RCE1849BL, Slash 2/4WD Aluminum Front Shock (pr) - Blue
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment. Replaces the kit plastic shocks (TRA3760).
Firm Springs Included
Specifications:
Spring Length: 57mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
RCE1849RD, Slash 2/4WD Aluminum Front Shock (pr) - Red
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment. Replaces the kit plastic shocks (TRA3760).*Firm Springs Included
Specifications:
Spring Length: 57mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
RCE1850BL, Slash 2/4WD Aluminum Rear Shock (pr) - Blue
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment.*Firm Springs Included
Specifications:
Spring Length: 66mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
RCE1850R, Slash 2/4WD Aluminum Rear Shock (pr) - Red
Slash 2/4WD Aluminum Rear Shock (pr) - Red
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment.
Specifications:
Spring Length: 66mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
RPM73752, Front Bulkhead, Black: TRA 2WD
Product Details
Key Features
Fits Traxxas 2-Wheel drive 1/10 vehicles
Made from RPM's trademarked blend of incredibly strong nylons
RPM's industry-leading limited lifetime breakage warranty
Available in different colors
COMPATIBILITY
Traxxas Bandit
Traxxas Nitro Rustler
Traxxas Nitro Slash
Traxxas Nitro Sport
Traxxas Nitro Stampede
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
Overview
One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability.
Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments.
We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck.
Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM!
Tech Notes: Fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac). It does not fit the 4x4 versions of any of these vehicles.
* Weight comparison is based off of the stock bulkhead versus the RPM Front Bulkhead without the dust plate installed.
Product Specifications
Material
Nylon
Scale
1/10
RPM80242, RPM Front A-Arms (Black) (Rustler, Stampede & Slash) (2)
This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd. These arms are built to withstand abuse. Plus, they shave some unwanted unsprung weight as well! RPM Front A-arms are nearly 25% lighter than stock versions of the same A-arms, and are backed by RPM's world-renowned breakage warranty. Additionally, RPM has increased clearance areas in the outer portion of the A-arms to allow increased droop travel when used in conjunction with RPM oversized bearing carriers (RPM80372 & RPM80382).
RPM front A-arms for the Electric versions of the Traxxas Slash, Rustler & Stampede are sold in pairs and are available in black, green, blue and red. These A-arms are molded with what is fast becoming an RPM trademark design of angled leading and trailing edges to reduce frontal edge mass and improve the a-arm’s ability to ride up and over tall obstacles instead of slamming into them. RPM A-arms are extremely rigid for superior ride and stability over the roughest tracks and terrain.
Features:
Nearly 25% lighter than stock
Stronger material resists flexing and breaking
Increased clearance in outer area of arms
This product was added to our catalog on December 16, 2021
RPM80372, RPM Front Bearing Carrier Set (Black) (2) (Slash, Bandit, Rustler, Stampede)
RPM Traxxas Steering Blocks are the perfect solution for worn bushings and weak 5x8mm bearings. Give your electric the same bearing the nitro trucks come stock with - 5x11mm! The oversize bearings have higher load ratings than a 5x8mm bearing and will significantly increase the time between maintenance. In addition, these oversized bearing carriers are so strong, RPM guarantee that they won't ever break! When used in conjunction with the RPM Rear Bearing Carriers (RPM80382), you'll never have to worry about worn-out bushings or blown wheel bearings again!
NOTE: 5x11x4mm bearings are not included. 4 bearings are required.
Features:
Fits the 2WD Slash, Nitro Slash, Bandit, Electric Rustler and Electric Stampede
Replaces stock Traxxas #3736
5x11x4mm size bearings not included
Available in Black and Blue
This product was added to our catalog on October 13, 2021
RPM80375, Front Bearing Carrier, Blue: TRA 2WD
Product Details
Key Features
Fits the 2WD Slash, Nitro Slash, Electric Rustler and Electric Stampede
Replaces stock Traxxas #3736
5x11x4mm size bearings not included
Available in Black and Blue
Overview
Traxxas Bandit
Traxxas Nitro Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
RPM oversized bearing carriers are the perfect solution for worn bushings and weak 5 x 8mm. bearings! Give your electric the same performance the nitro trucks come stock with. 5 x 11mm. bearings have higher load ratings than a 5 x 8mm. bearing and will significantly increase the time between maintenance periods. In addition, our bearing carriers are so strong; we guarantee that they won't ever break! Molded in black. When used in conjunction with our #80382 Rear Bearing Carriers, you'll never have to worry about worn-out bushings or blown wheel bearings again!
Tech Notes: 5x11x4mm. bearings are not included with these kits (4 bearings are needed for each kit).
Product Specifications
Material
Plastic
Refinement Color
Blue
This product was added to our catalog on December 16, 2021
RPM80382, Rear Bearing Carriers, Black: RU, ST, BA, SLH
Product Details
Key Features
Strong and durable
Overview
Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM’s front and rear bearing carriers allow e-Rustler, e-Stampede, Slash & Bandit owners to install massive 5mm x 11mm bearings (not included) that will not only improve performance, but will increase the time interval between maintenance periods. In addition, our front and rear bearing carriers are molded in black from RPM’s killer blend of bulletproof nylons and are guaranteed not to break!
Product Specifications
Refinement Color
Black
Material
Plastic
RPM80712, Caster Blocks, for Traxxas Electric Slash, Stampede, Rustler, Nitro Slash, Black
Product Details
Traxxas Nitro Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
Overview
RPM Caster Blocks for the Traxxas Slash, e-Rustler & e-Stampede are the final link in for a complete, bulletproof front suspension from RPM for these trucks. RPM Caster Blocks are redesigned to slim down unnecessary bulk while improving strength and durability in this heavily impacted area. These are stock replacement items. No additional parts or modifications are necessary to mount a set to a vehicle.
RPM Caster Blocks are molded in our trademark blend of ultra durable and super strong nylons and backed by the best breakage warranty in the R/C industry. Each package contains one left side and one right side caster block.
Tech Notes: RPM #80715 Caster Blocks replace Traxxas stock #3632 Caster Blocks. RPM Caster Blocks retain stock Rustler & Stampede 30 degree caster settings. These Caster Blocks will not work on nitro versions of the Rustler & Stampede nor 4wd versions of the Stampede or Slash.
Product Specifications
Refinement Color
Black
Material
Plastic
RPM80832, R Shock Tower,Black: RU, ST, BA, SLH
Product Details
Overview
RPM rear shock towers for the electric versions of the Stampede, Rustler & Bandit as well as the Slash were designed with one thing in mind – rugged durability. Once again, we’ve exceeded our own expectations with this shock tower. While we’ve maintained all stock geometry on these shock towers, we’ve beefed them up in all the right places to eliminate annoying rear shock tower breakage. Our version of this shock tower uses an I-Beam construction that improves durability and rigidity as well. At the base of the shock tower, we’ve improved the screws’ head clearance of the bulkhead mounting screws to eliminate the bind normally associated with the stock rear shock tower. All these design elements combine to create the ultimate lightweight, bulletproof rear shock tower for the electric versions of the Rustler & Stampede.
RPM rear shock towers for the Traxxas Slash, Electric Stampede, Electric Rustler & Bandit are molded in black and are backed by our famous breakage warranty. These towers are direct replacement parts for ease of installation.
Product Specifications
Part Type
Shocks & Shock Parts
Refinement Color
Black
Material
Plastic
SPTST3677B, ST Racing Concepts Aluminum Rear Motor Guard (Blue)
Aluminum Rear Motor Guard, Blue, for Traxxas Slash / Stampede VXL / Rustler VXL / Bandit VXL
Precision CNC Machined from high grade aluminum, our rear aluminum motor guard adds extra protection around the motor area and provides more strength to the rear of your Traxxas vehicle, while enhancing the looks as well. Works with Traxxas Slash, Rustler VXL, Stampede VXL and Bandit VXL. Anodized Royal Blue
This product was added to our catalog on December 16, 2021
TFE1165, FastEddy Traxxas Slash 4X4 Ultimate Bearing Kit
Team FastEddy Traxxas Slash 4X4 Ultimate Bearing Kit. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(5) 10x15x4
(1) 12x18x4
(7) 5x11x4
(4) 5x8x2.5
(2) 6x12x4
(2) 8x16x5
NOTE:
Photo of unpackaged bearings shows random bearings and is not representative of what you will receive.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK your R/C before ordering to make sure you get all the proper bearings. FastEddy does their best to keep the kits updated. If you find a variation or mistake in this kit, please contact us.
This product was added to our catalog on June 29, 2021
Traxxas Slash 4X4 Ultimate Ceramic Rubber Sealed Bearing Kit
Steel Races and Cages combined with Ceramic Balls, Non Contact Rubber Seals , and Grease, will give you the absolute strongest and best off road performance available. We have included no contact rubber seals to keep the contamination out and the super slick grease in. This offers the outstanding durability that off road demands.This is truly a WINNING combination. The high-performance and durability of ceramic balls, and the No maintenance durability of rubber seals and grease will keep you going smoother and faster then any other bearing on the market.
(6) 5x11x4 Ceramic
(5) 10x15x4 Ceramic
(4) 6x12x4 Ceramic
(4) 5x8x2.5 Ceramic
(2) 12x18x4 Ceramic
(2) 8x16x5 Ceramic
(2) 5x10x4 Ceramic
You are purchasing the bearings listed above.In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. We try to keep the kits updated as best as we can. If you find a variation or mistake in our kits, please contact us so we can look into it.
Part #: TFE3599
