Traxxas Slash (4WD) Bearing Kit
(4) 5X8x2.5
(2) 5X10x4
(6) 5x11x4
(4) 6X12x4
(2) 8X16x5
(5) 10X15x4
(2) 12X18x4
You are purchasing the bearings listed above.In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. We try to keep the kits updated as best as we can. If you find a variation or mistake in our kits, please contact us so we can look into it.
NOTE: PHOTOS ARE FOR IDENTIFICATION ONLYPhotos are for Seal / Shield / Bearing Style identification only and ARE NOT a photo of the exact bearing being ordered. Please reference the size.
Part #: TFE90
TFE90, FastEddy Traxxas Slash 4WD Bearing Kit
This product was added to our catalog on December 16, 2021
TKR6837, Tekno RC Nylon M6 Driveshaft Steering Block Set (2)
Front steering blocks for the Tekno RC M6 Driveshafts for Slash and Slash 4×4. Molded nylon composite for incredible strength and light weight. Added bump steer holes for better fine tuning the handling of your vehicle. Increased outer bearing size for increased durability.
Note: These are meant to be used with the Tekno RC M6 (6mm) Driveshafts and stub axles. These are not a direct stock replacement unless you are using the M6 Driveshafts.
This product was added to our catalog on December 16, 2021
TRA2753X, Traxxas Rear Stub Axles (2)
Replacement part for these models:
Traxxas Bandit
Traxxas Nitro Rustler
Traxxas Nitro Sport
Traxxas Nitro Stampede
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
This product was added to our catalog on May 7, 2021
TRA3654, Traxxas Front Hex Wheel Hub (2)
This is a pack of two replacement Traxxas Front Hex Wheel Hubs. This package also includes two axle pins.
Traxxas Drag Slash
Traxxas Nitro Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
This product was added to our catalog or updated on April 4, 2022
TRA3677, Traxxas Wheelie Bar Mount (Black)
This is a replacement Traxxas Wheelie Bar Mount, and is intended for use with the Traxxas 2wd models like the Slash, Bandit, Rustler and Stampede.
This product was added to our catalog on September 7, 2021
TRA3678, Traxxas Wheelie Bar Assembly (Black)
This is a replacement wheelie bar assembly from Traxxas. This wheelie bar mounts to the rear of the car to prevent if from flipping over backwards during hard acceleration.
The patented Traxxas adjustable wheelie bar features four-position adjustment to control the height of your wheelies. Durable composite nylon construction offers an extra level of protection for the motor and transmission case. Installation is quick and easy while optional aluminum wheels with rubber tires (5186 and 5186A) provide extra style and increased performance (sold separately).
Replacement part for these models:
Stampede® VXL
Accessory part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Ford® F-150 Raptor
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Stampede®
This product was added to our catalog on September 7, 2021
TRA3736, Traxxas Steering Blocks (2) (VXL)
This is a set of two replacement steering blocks from Traxxas. These steering blocks mount the the front uprights, and support the front axles.
This product was added to our catalog on May 29, 2021
TRA3739, Traxxas Screw Pin Set
This is a replacement suspension screw pin set from Traxxas. These suspension screw pins are used where the suspension arms pivot.
Fits:
Traxxas Bandit
Traxxas Hoss
Traxxas Nitro Slash
Traxxas Rally
Traxxas Rustler 2wd
Traxxas Rustler 4x4
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 2wd
This product was added to our catalog on April 12, 2021
TRA5827X, Traxxas Battery Expansion Hold Down Retainer Kit
This is an optional Traxxas Battery Hold Down Retainer. This extended battery strap for the Slash and Slash 4x4 allows the use of LiPo packs up to 42mm tall in the stock battery tray. Package includes the battery strap, battery strap retainer, battery post, foam spacer and an angled body clip.
This product was added to our catalog on September 7, 2021
TRA5862, Traxxas Big Bore Shocks (Traxxas Slash) (4)
Big Bore shocks (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts and springs) (front & rear) (4)
Big Bore shocks provide optimal bump and jump control for your Traxxas model. Hard-anodized aluminum bodies, PTFE-coated shock bores, and titanium nitride coated shafts offer incredible durability and near frictionless operation for ultra-smooth damping and long-lasting performance.
The all-inclusive kit contains 30-weight shock oil, ride height spacers, and progressive-rate springs for 2WD Slash models.
For other models, use the springs included with your vehicle.
Accessory part for these models:
Hoss® 4X4 VXL
Rustler® 4X4 VXL
Slash 4X4 Ultimate
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Ford® F-150 Raptor
Ford® Fiesta® ST Rally
Nitro Rustler®
Nitro Slash
Rustler® 4X4
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash 4X4 VXL
Slash 4X4
Slash VXL
Slash
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
Stampede® 4X4
Stampede® VXL
Stampede®
This product was added to our catalog on April 12, 2021
TRA5863R, Traxxas Tire/Wheel Assembled Glued S1 Compound SCT Black
This is a pair of Assembled Traxxas SCT S1 Tires and 5-Spoke Wheels.
This product was added to our catalog on May 7, 2021
TRA5883, Traxxas BFGoodrich KM2 Tire w/Split-Spoke Rear Wheel (2) (Black) (Standard))
This is a set of two Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires, Pre-Mounted on Split-Spoke SCT Wheels. These are intended for use on the front and rear of the Traxxas Slash 4x4 and the rear of the Traxxas Slash 2wd line of trucks. These are fully licensed BFGoodrich Mud-Terrain T/A tires, and have been proven performers in TORC series competition. The distinctive tread design has been faithfully re-created, complete with white sidewall lettering.
Fits:
Traxxas Nitro Slash
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Telluride 4x4
The design of the Split-Spoke SCT wheel features a black center and color molded beadlock detail in either blue or chrome for a realistic look. Fully compatible with factory Traxxas and aftermarket 2.2/3.0 tires, the wheels feature 12mm hexes and the same offset as Slash 2wd rear wheels.
This product was added to our catalog on May 10, 2021
6754 - Stub axle, front, 5mm (steel-splined constant-velocity driveshaft) (1)
TRA6754, STUB AXLE FRONT STEEL CV (1)
This product was added to our catalog on September 7, 2021
TRA6811R, Traxxas Slash 4X4 Heavy Duty Body (Clear)
This is an optional Traxxas Slash 4X4 Clear Heavy Duty Body, intended for use with the Traxxas Slash 4X4 and Traxxas Slayer short course trucks. This clear body is a blank canvas, ready for you to add your own unique paint scheme, and has been factory trimmed. This body includes window masks and decals.
This product was added to our catalog on September 7, 2021
6811X - Body, Slash 4X4, ProGraphix (Graphics are printed, requires paint & final color application)/ decal sheet
TRA6811X, BODY SLASH 4X4 PRGRPHX
This product was added to our catalog on September 7, 2021
TRA6835X, Traxxas Slash 4X4 Front Bumper (LED Compatible)
Traxxas Slash Front Bumper. This replacement front bumper is intended for the Traxxas Slash platforms.
Package includes one front bumper with a bumper mount.
This product was added to our catalog on February 9, 2022
TRA6837, Traxxas Left/Right Steering Block Set
Replacement part for these models:
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 VXL
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
Stampede® 4X4
Accessory part for these models:
Slash 4X4 Ultimate
This product was added to our catalog on September 7, 2021
TRA6852R, Traxxas Rear Heavy Duty Steel CV Driveshaft (2)
This is an optional Traxxas Rear Steel Constant-Velocity Driveshaft Set, and is intended for use with the Traxxas Slash 4X4 and Slash 2wd 1/10 scale short course trucks, as well as the Traxxas Rally. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and blue silicone boots add a custom look.
This product was added to our catalog on September 7, 2021
TRA6876, Traxxas BFGoodrich KM2 Tire w/SCT Rear Wheel (2) (Chrome/Green) (Standard)
Traxxas Nitro Slash
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Telluride 4x4
This is a set of two Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires, Pre-Mounted on SCT Chrome Wheels. These are intended for use on the front and rear of the Traxxas Slash 4x4 and the rear of the Traxxas Slash 2wd line of trucks. These are the fully licensed BFGoodrich Mud-Terrain T/A tires, and have been proven performers in TORC series competition. The distinctive tread design has been faithfully re-created in high grip rubber.
The design of the SCT wheel features a chrome center and color molded beadlock detail for a realistic look. Fully compatible with factory Traxxas and aftermarket 2.2/3.0 tires, the wheels feature 12mm hexes and the same offset as Slash 2wd rear wheels.
This product was added to our catalog on September 7, 2021
TRA7430X, Traxxas Slash 4X4 LCG Front Bulkhead
Traxxas Slash 4X4 LCG Front Bulkhead. This replacement bulkhead is intended for Traxxas vehicles equipped with the LCG Chassis (TRA7422 or TRA7422A).
Package includes one bulkhead.
This product was added to our catalog on September 7, 2021
TRA9032X, Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty Caster Blocks (Blue) (2)
Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty Caster Blocks. These caster blocks are intended for the Traxxas Hoss 4x4, Rustler 4x4 or Slash 4x4 when equipped with the optional Traxxas Heavy Duty Upgrade Kit (TRA9080). Package includes two caster blocks, two hinge pins and hardware.NOTE: These caster blocks are designed to be used with the TRA9080 upgrade kit only. They will not fit the factory suspension parts found on your model.
This product was added to our catalog on May 10, 2021
TRA9037, Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty Steering Blocks (Black) (2)
Replacement left and right steering blocks for the Extreme Heavy Duty Upgrade Kit with 3x20 mm screws (2). Steering blocks are for use with the 9080-series upgrade kit only and will not fit standard suspension parts.
This item was added to our catalog August 16, 2024
TRA9037X, Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty Steering Blocks (Blue) (2)
Replacement left and right steering blocks for the Extreme Heavy Duty Upgrade Kit with 3x20 mm screws (2). Steering blocks are for use with the 9080-series upgrade kit only and will not fit standard suspension parts.
This item was added to our catalog August 16, 2024
TRA9069, Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty 12mm Wheel Hexes (4)
Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty 12mm Wheel Hexes. These wheel hexes are intended for the Traxxas Hoss 4x4, Rustler 4x4 or Slash 4x4 when equipped with the optional Traxxas Heavy Duty Upgrade Kit (TRA9080). Package includes four wheel hexes and four pins.
NOTE: These hexes are designed to be used with the TRA9080 upgrade kit only. They will not fit the factory suspension parts found on your model.
This product was added to our catalog on September 7, 2023
TRA9495, Traxxas Magnum 272R Assembled Transmission
The Traxxas Magnum 272R Assembled Transmission has been developed specifically for hard hitting drag applications. This replacement transmission is intended for the Traxxas Drag Slash, however, it will work with the 2WD Bandit, Rustler, Stampede or Slash. Package includes one preassembled transmission.
Traxxas Bandit
Traxxas Drag Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
The transmission comes preassembled with all metal gears, bevel gear differential and easily removeable differential. To hold these components together, Traxxas has made an extremely rigid case that incorporates the suspension arm mounts and mount positions for the optional wheelie bar. Full metal gears are used allowing optimal power transfer. Sealed bevel gear differentials are easily tunable to help you get maximum traction on any surface. A removable cover on the bottom of the transmission case allows for ease of access to the differential making maintenance a breeze. All of these features and functions allow greater consistency and all around performance.
Features:
Extremely rigid case
Includes 3.2mm aluminum motor plate
Full metal gears
Tunable sealed differential
This product was added to our catalog on October 19, 2021
Traxxas Battery Hold Down Plate
This is a replacement battery hold down plate with posts, and clips from Traxxas.
Traxxas Bandit
Traxxas Rustler 2wd
Traxxas Slash 2wd
This product was added to our catalog on September 7, 2021
Traxxas Slash 1/10 Pre-Cut Short Course Truck Body (Clear)
Traxxas® Slash® 1/10 Pre-Cut Short Course Truck Body. This is a replacement body intended for use on the Traxxas Slash 1/10 2WD Short Course Truck. Alternatively, it will also fit the Traxxas Slash 1/10 Ultimate, 4x4, and 4x4 VXL platforms. This body is clear and unpainted, allowing you to add your own custom paint scheme to your truck. It is pre-trimmed with body holes already drilled for a seamless fit with the clipless mounting system (sold separately*).
Note:
*This body has pre-drilled holes specifically designed for the Traxxas Clipless Body Mounts (TRA6967) and the Traxxas Slash Clipless Body Latch Mount Retainers Set (TRA6966) sold separately.
Painted body shown in the photos is for illustrative purposes only. The product you will receive is clear and unpainted.
Features:
Pre-cut for a precise fit
Made from durable, high-quality polycarbonate material
Unpainted finish allows you to customize the paint job
Includes an overspray film to protect the body during painting
Pre-cut window masks ensure clean and clear windows
Add finishing touches and enhance the visual appeal with included decals
Engineered specifically for the Traxxas Slash 1/10 scale chassis
Pre-drilled body holes ready for the clipless mounting system available separately
Specifications:
Scale: 1/10
Length: 21.13in (536.58mm)
Wheelbase: 13.2in (335mm)
Width: 11.75in (298.45mm)
Height: 5.75in (146.05mm)
Application: Short Course Truck
Includes:
(1) Traxxas Slash 1/10 Pre-Cut Short Course Truck Body
(1) Window Masking Sheet
(1) Decal Sheet
This product was added to our catalog on July 22, 2024
Traxxas Slash Pre-Painted Body or Traxxas Slash ProGraphix Body (Clear)
Traxxas Slash Pre-Painted Body.
This pre-painted and pre-trimmed body is a replacement for the Traxxas Slash 2WD but can also be used as an option for the Slash 4WD short course truck. Package includes one pre-painted body.
Traxxas Slash ProGraphix Clear Body.
This clear, pre-trimmed body is an option intended for the Traxxas Slash 2WD but can also be used for the Slash 4WD short course truck. ProGraphix bodies come with detailed graphics factory applied and are ready to be painted in your own custom color. Package includes one clear body with protective overspray film and one decal sheet.
This product was added to our catalog on March 22, 2023
YEA-TRSL-015RBU, Yeah Racing Traxxas Slash/Stampede 4x4 HD Rear Driveshafts (Blue)
Yeah Racing Traxxas Slash/Stampede 4x4 HD Rear Driveshafts. These optional driveshafts are made from tool grade steel to provide extreme strength. The center section of the shaft is made from aluminum to keep weight low providing an excellent balance between weight and strength. Package includes two drive shafts intended for the Traxxas Slash 4x4 or Stampede 4x4.
This product was added to our catalog on December 16, 2021
YEA-TRSL-016BU, Yeah Racing 90mm Aluminum TR-XB Big Bore Shocks (Blue) (2)
Yeah Racing 90mm Aluminum TR-XB Big Bore Shocks. These optional shocks feature threaded bodies and are intended for the Traxxas Stampede, Slash or Bandit. Package includes two assembled shocks.
NOTE: These shocks do not come pre-oiled and will require you to fill with your shock fluid.
Features:
Perfect fit for the Traxxas Slash, Stampede or Bandit
Aluminum, threaded, shock bodies
This product was added to our catalog on December 30, 2021
YEA-TRSL-017RD, Yeah Racing Traxxas Slash/Stampede/Bandit Aluminum Big Bore Shocks (Red) (2)
Yeah Racing Traxxas Slash/Stampede/Bandit Aluminum Big Bore Shocks. These optional shocks are a great way to increase the handling performance of your Traxxas Slash, Stampede or Bandit.
These shocks come assembled and only require you to fill with the shock fluid of your choice (sold separately). Package includes two assembled shocks.
This product was added to our catalog on March 4, 2021
YEA-TRSL-018BU, Yeah Racing 105mm Aluminum TR-XB Big Bore Shocks (Blue) (2)
Yeah Racing 105mm Aluminum TR-XB Big Bore Shocks. These optional shocks feature threaded bodies and are intended for the Traxxas Stampede, Slash or Bandit.
Package includes two assembled shocks.
NOTE: These shocks do not come pre-oiled and will require you to fill with your shock fluid.
Features:
Perfect fit for the Traxxas Slash, Stampede or Bandit
Threaded aluminum shock bodies
This product was added to our catalog on December 16, 2021
YEA-TRSL-018RD, Yeah Racing 105mm Aluminum TR-XB Big Bore Shocks (Red) (2)
Yeah Racing 105mm Aluminum TR-XB Big Bore Shocks. These optional shocks feature threaded bodies and are intended for the Traxxas Stampede, Slash or Bandit. Package includes two assembled shocks.
NOTE: These shocks do not come pre-oiled and will require you to fill with your shock fluid.
Features:
Perfect fit for the Traxxas Slash, Stampede or Bandit
Threaded aluminum shock bodies
This product was added to our catalog on December 16, 2021
