HRAMXX10W01, Hot Racing Traxxas Maxx Aluminum +10mm 17mm Splined Hubs
Hot Racing Traxxas Maxx Aluminum +10mm 17mm Splined Hubs increase the track width of the vehicle to increase stability and replace the existing hexes so the vehicle can accept wheels with a 17mm hex.
NOTE: Not compatible with WideMaxx optional Steel CV Driveshafts TRA8996A
Features:
+10mm hub extensions (each side) increase stability over terrain
Black anodized CNC machined aluminum hub extensions
Blue anodized CNC machined 17mm wheel nuts
Rubber o-ringed wheel nuts help prevent wheel loosening
Closed ends on wheel nuts protect against dirt and debris build-up in the axle or hub
Hardened steel axle nuts fit inside hex hub to secure axle to hub. Axle nuts are tightened with included hex wrench.
Includes:
(4) 17mm hex hubs
(4) 2.5x15mm pins
(4) M5 barrel nuts
(1) 4mm hex wrench
This product was added to our catalog on December 16, 2021
HRAMXX125, Hot Racing Traxxas Maxx Differential Locker Spool
The Hot Racing Traxxas Maxx Differential Locker Spool is a tuning option that eliminates the differential, and creates a solid spool. This can be used in the front or rear and is recommended for off-road use only.
Features:
Black oxide coated CNC machined steel
Fits front or rear
Recommended for off-road use ONLY
Replaces Traxxas TRA8982 output gears and TRA8981 gears case
Includes:
(1) differential spool shaft
This product was added to our catalog on April 21, 2021
HRAMXX288RC06, Hot Racing Traxxas Maxx Metal CV Splined Drive Shaft (Blue) (2)
The Hot Racing Traxxas Maxx Metal CV Splined Drive Shaft is an optional heavy duty splined star drive CVD axle kit that fits the front or rear of the Traxxas 1/10th scale Maxx monster truck.
NOTE:
Traxxas WIDE Maxx applications require optional 65mm center drive tube (HRASLD65T)
Must re-use the stock Drive pin and set screw Pin
Maintain CV joint and shaft spline with grease
Use medium thread lock on screws threading into metal
Features:
CNC machined #45 hardened carbon steel CVs, drive hub, male slider spline, and stub axle
CNC machined aluminum slider tube
Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
Rubber dust cover boots
Replaces factory front or rear driveshaft axles
Specifications:
Collapsed length (overall): 140mm
Extended length (overall resulting in zero shaft engagement): 156mm
Collapsed length (wheel pin to outdrive pin): 118mm
Extended length (wheel pin to outdrive pin resulting in zero shaft engagement): 132mm
Includes:
(2) splined axle assemblies
This product was added to our catalog on December 16, 2021
PHBPHMAXX01-Blue, Aluminum Wheelie Bar, Blue, fits Traxxas Maxx High-quality aluminum, durable and strong Increase overall performance and durability of your Maxx
This product was added to our catalog on October 14, 2021
PRO117810, Pro-Line Badlands 3.8" Pre-Mounted Truck Tires (2) (Black) w/Raid Wheels (M2)
The Badlands 3.8" tires now come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires. These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (PRO6345-00). The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere.
Arrma Kraton 6S BLX
HPI Savage Flux HP
HPI Savage X
HPI Savage XL
Team Associated MGT
Traxxas Revo Nitro
Traxxas Summit 1/10
Traxxas T-Maxx
Features:
Tire:
Readers' Choice Award Winning Tread Design
Aggressive Tire Design
Tire Based on Motocross Tread Technology
Large Tire Lugs for the Ultimate in Tire Durability
Made in the USA, since 1982
Wheel:
Removable Hexes Allow you to Easily Replace Damaged Hexes
17mm Wide Offset 8x32 Hexes are Included
Wheel Made from High-strength, Durable DuPont Nylon Material
Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
M3 Wheel Hex Hardware Included
Specifications:
Height: 5.85" (149mm)
Width: 2.72" (69mm)
Includes:
(2) Pre-Mounted Badlands 3.8" Tires on Raid Black 8x32 Removable Hex Wheels
(2) 8x32 to 17mm 1/2" Offset Hex Adapters
(16) M3 x 12mm long SHCS hardware
This product was added to our catalog on August 14, 2021
Suspension kit, WideMaxx™, (includes front & rear suspension arms, front toe links, outer half shafts (extended), rear shock springs)
SUSPENSION KIT WIDEMAXX
This product was added to our catalog on December 15, 2021
TRA2085R, Traxxas X-Maxx, XRT, and Maxx Servo, digital high-torque/high-speed, metal gear (ball bearing), waterproof
High Torque: 650 oz-in
78% more torque than stock 2085
High Speed: 0.13 sec/60°
30% faster than stock 2085
All metal gears with steel output gear and spline
Blue-anodized aluminum center case
Dual ball bearings
Includes metal steering link and heavy duty servo saver spring
Fits X-Maxx, XRT, and Maxx
This product was added to our catalog on May 7, 2021
TRA2085X, Traxxas X-Maxx/XRT/Maxx Waterproof Digital High-Torque Servo
This is the Traxxas X-Maxx/XRT Waterproof Digital High-Torque Servo. This metal gear (ball bearing) waterproof servo also includes the servo saver spring and assembled steering link.
The X-Maxx steering servo includes full metal gears and adds a massive 23% more torque to take on the most extreme environments. The kit also includes a stiffer servo saver spring and steel steering linkage for increased precision and control during high speed driving.
Accessory part for these models:
Traxxas Maxx
Traxxas X-Maxx
Traxxas XRT
This product was added to our catalog on May 7, 2021
TRA2889X, Traxxas Maxx 4S 25C LiPo Battery (14.8V/5000mAh)
This is a Traxxas 5000Mah 14.8V 4-Cell 25C Lipo Battery, a Certified iD-Equipped LiPo battery that is engineered to provide the punch and on-demand power for achieving the top speeds that Traxxas models designed to reach. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available.
Specifications:
Type: LiPo
Total Capacity: 5000mAh
Voltage: 14.8V
C Rating: 25
Length: 155mm
Height: 34mm
Width: 45mm
Weight: 16.8g
This product was added to our catalog on April 7, 2021
TRA2890X, Traxxas 4S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (14.8V/6700mAh)
The Traxxas 4S "Power Cell" 25C LiPo Battery delivers 6700mAh capacity and 50C burst discharge rate for power, performance, and runtime. Built using the same sturdy construction methods as the Traxxas 2-cell and 3-cell batteries, but checking in at over 30-volts in 8s configuration, Traxxas 4-cell LiPos will stand X-Maxx on its wheelie bar and have it catching massive air as fast as you can grab the throttle.
Features:
Traxxas High-Current Connectors
Integrated LiPo Balance Charging Wires
Semi-Rigid Construction for efficient packaging
Oversized Discharge Tabs for minimum resistance
Hard-wired 12-gauge Maxx Cable soldered to cells
Center Wire Exit for guaranteed proper fitment
(L) 185mm x (W) 50mm x (H) 44mm
675 Grams (average)
Accessory part for these models:
Traxxas Maxx
Traxxas Unlimited Desert Racer
Traxxas X-Maxx
Traxxas XRT
This product was added to our catalog on April 7, 2021
TRA3461, Traxxas Velineon 540XL Brushless Motor (2400Kv)
This is a replacement Traxxas Velineon 540XL 2400Kv Brushless Motor. This motor is a replacement for the Traxxas Maxx and features 12-gauge wire and gold-plated bullet connectors to make it easy to install.
Fits:
Traxxas Hoss
Traxxas Maxx WideMaxx
Traxxas Maxx
This product was added to our catalog on April 28, 2021
TRA3463, Traxxas Cooling Fan Kit w/Shroud
This is a replacement Traxxas Cooling Fan Kit with Shroud, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck and uses the Velineon 540XL motor.
This product was added to our catalog or updated on April 4, 2022
TRA3465, Traxxas Velineon VXL-4S Brushless Electronic Speed Control
Traxxas Velineon VXL-4S Brushless Electronic Speed Control. This ESC is a replacement for the Traxxas Maxx Monster Truck.
Specifications:
Input Voltage: 3S–4S LiPo (11.1V – 16.8V)
Case Size: 2.83 inches (72mm) x 2.32 inches (59mm) x 1.93 inches (49mm)
Weight: 201g (7.09oz)
BEC Voltage: 6.0 V
BEC Current Continuous: 10 A
BEC Current Peak: 20 A
Motor Connectors: Traxxas 6.5mm bullet connectors
Battery Connectors: Traxxas High-Current Connectors
Power Wire: 10-gauge Maxx Cable
Ports: RX input, auxiliary fan, Traxxas accessory port
This product was added to our catalog on May 2, 2021
TRA3465T, Traxxas Velineon VXL-4s High Output Electronic Speed Control, waterproof (brushless) (fwd/rev/brake)
Traxxas Velineon VXL-4S Brushless Electronic Speed Control. This ESC is a replacement for the Traxxas Maxx Monster Truck
Specifications:
Input Voltage: 3S–4S LiPo (11.1V – 16.8V)
Case Size: 2.83 inches (72mm) x 2.32 inches (59mm) x 1.93 inches (49mm)
Weight: 201g (7.09oz)
BEC Voltage: 6.0 V
BEC Current Continuous: 10 A
BEC Current Peak: 20 A
Motor Connectors: Traxxas 6.5mm bullet connectors
Battery Connectors: Traxxas High-Current Connectors
Power Wire: 10-gauge Maxx Cable
Ports: RX input, auxiliary fan, Traxxas accessory port
This product was added to our catalog on May 2, 2021
TRA3475, Traxxas Velineon VXL-8S Cooling Fan
Fits:
Traxxas Maxx
Traxxas Sledge
Traxxas X-Maxx
Traxxas XRT
This product was added to our catalog on May 7, 2021
TRA6448, Traxxas Mod 1.0 Spur Gear (50T)
Traxxas XO-1 Mod 1 Spur Gears are available in 46, 50 or 54 tooth count options to fine tune the gear ratio of your model.
Effects of Spur Gear Changes
Gear
Effects
Larger Spur
Increased acceleration
Decreased top speed
Use on smaller tracks for more punch
Use with larger pinion to get more overall torque, while maintaining the same gear ratio
Smaller Spur
Decreases acceleration, but smoother
Increases top speed
This product was added to our catalog on April 17, 2021
TRA6449X, Traxxas Mod 1.0 Spur Gear (54T)
Replacement part for these models:
X-Maxx®
Accessory part for these models:
Maxx®
This product was added to our catalog on September 7, 2021
TRA6590, Traxxas High-Voltage Power Amplifier
This is a Traxxas High-Voltage Power Amplifier, intended for use as a replacement with the Unlimited Desert Racer and as an accessory part for the Maxx and X-Maxx kits. This will allow you to change lighting modes on the fly when using the Traxxas Link app.
This product was added to our catalog on March 20, 2020
TRA7883, Traxxas Maxx/X-Maxx/XRT Rear LED Light Bar (Red/White)
Traxxas Maxx/X-Maxx Rear Led Light Bar. This optional 100mm wide light bar is intended for the rear of the Traxxas Maxx or X-Maxx body. Featuring red LED running lights and white LED reverse lights.
Package includes one light bar, one light bar mount and hardware.
This product was added to our catalog on September 7, 2021
TRA8654, Traxxas 17mm Splined Wheel Hub Hex (Blue) (4)
This is a pack of two replacement Traxxas 17mm Splined Wheel Hub Hexes, in Blue anodize. Also included are four 4x5mm set screws and four 3x14mm pins.
NOTE: Maxx users, TRA8980X or TRA8996X drive shafts are required for use.
Fits:
Traxxas E-Revo VXL 2.0
Traxxas Maxx
Traxxas Sledge
This product was added to our catalog on May 7, 2021
TRA8654R, Traxxas 17mm Splined Wheel Hub Hex (Red) (4)
Traxxas E-Revo VXL 2.0
Traxxas Maxx
Traxxas Sledge
This is a pack of two replacement Traxxas 17mm Splined Wheel Hub Hexes, in Red anodize. Also included are four 4x5mm set screws and four 3x14mm pins.
TECH NOTE: Maxx users, TRA8980X or TRA8996X drive shafts are required for use.
This product was added to our catalog on September 7, 2021
RA8798, Maxx Hardware Kit
Give your Traxxas Maxx a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware. Individual compartments keep everything organized with a handy label to measure and identify the parts.
This product was added to our catalog on October 5, 2023
TRA8798X, Maxx Stainless Hardware Kit
Give your Traxxas Maxx a complete upgrade with this stainless steel hardware kit. The hardware kit replaces the standard hardware on your vehicle with stainless steel hardware for long-lasting performance in wet conditions. Hex-drive heads deliver a positive and secure connection for easy installation and removal. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts.
This product was added to our catalog on October 5, 2023
TRA8799, Maxx Bearing Kit
Restore your Traxxas Maxx to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replacements. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts.
This product was added to our catalog on October 5, 2023
TRA8799X, Maxx Stainless Bearing Kit
Boost performance and reduce maintenance with this stainless steel bearing kit. The bearing kit replaces the standard bearings with high quality stainless steel bearings for long-lasting performance in wet conditions. High quality black seals offer ultimate protection from the elements with less maintenance in dirty environments. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts.
This product was added to our catalog on October 5, 2023
TRA8911G, Traxxas, BODY, MAXX®, GREEN W/ DECAL
Product Information:
TRA8911G, Traxxas, BODY, MAXX®, GREEN W/ DECAL
Traxxas Vehicles, Parts & Accessories
Traxxas
tra8911g
UPC: 020334891167
This product was added to our catalog or updated on April 4, 2022
TRA8919R, Traxxas Maxx Battery Hold-Down w/Mounts Set (352mm Wheelbase)
Battery hold-down/ mounts (front & rear)/ battery compartment spacers/ foam pads (fits Maxx® with extended chassis (352mm wheelbase))Battery hold down with front and rear mounts. Includes spacers and foam pads. Fits V2 (352 mm wheelbase) Maxx® chassis.
This product was added to our catalog on September 7, 2021
TRA8919X, BATTERY EXPANSION KIT MAXX
Battery expansion kit (allows for installation of taller battery packs in Maxx® with standard chassis (329mm wheelbase))
This product was added to our catalog on September 7, 2021
TRA8932X, Traxxas Maxx Aluminum Caster Blocks (Blue)
Traxxas aluminum caster blocks (C-hubs) take an already proven design and ratchet up the toughness and durability with 6061-T6 aluminum. The hubs are carefully machined from a block of aluminum to preserve their steering and suspension geometry. The brilliant anodized finish adds high-tech style to your machine. Includes 4x22 mm suspension pins (4), 3x6 mm screws (4), and screw retainers (4).
This product was added to our catalog on May 7, 2021
TRA8936X, Traxxas Maxx LED Light Rear Bumper
The Traxxas Maxx LED Light Rear Bumper is an optional upgrade for the Traxxas Maxx monster truck. This bumper allows the use of the Traxxas TRA8990 LED light kit (not included).
This product was added to our catalog on September 7, 2021
TRA8937G, Traxxas Maxx Aluminum Steering Blocks (Green)
Left and right aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these high-grade hop-up parts provide razor-sharp handling and high-tech style.
This product was added to our catalog on September 7, 2021
TRA8940, Traxxas Maxx Hardened Steel Suspension Screw Pins (10)
Suspension screw pin set, front or rear (hardened steel), 4x18mm (4), 4x38mm (2), 4x33mm (2), 4x43mm (2)Hardened steel suspension screw pin set includes 4x18 mm pins (4), 4x38 mm pins (2), 4x33 mm pins (2), and 4x43 mm pins (2). One pin set required per axle, two per truck.
This product was added to our catalog on September 7, 2021
TRA8940X, Traxxas Maxx Hardened Steel Suspension Pin Set
Suspension pin set, complete (hardened steel), 4x64mm (4), 4x22mm (4), 4x38mm (4), 4x33mm (4), 4x47mm (4)/ 3x8mm BCS (14)/ 3x6mm BCS (4)/ retainers (8)This easy-to-install kit replaces the screw-in suspension pins on Maxx® with premium hardened-steel pins for maximum strength and durability. The pins are captured by button-head screws and retaining caps for secure installation and the low-friction finish delivers super-smooth suspension performance. The complete set includes sixteen inner and outer pins for the upper and lower arms, four steering block kingpins, all required hardware, and illustrated instructions. Also compatible with the 8995 WideMaxx® Kit.
This product was added to our catalog on September 7, 2021
