ARA310479, Arrma Steel Mod1 Pinion Gear (w/5mm Bore) (18T)
These Arrma Pinion Gears are MOD1 and are offered in a variety of tooth counts. Each package includes one Steel pinion gear and one set screw.
Arrma Kraton 6S BLX
Arrma Mojave 6S BLX
Arrma Nero 6S BLX
Arrma Notorious 6S BLX
Arrma Outcast 6S BLX
Arrma Senton 6S BLX
Arrma Typhon 6S BLX
Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision manufactured tooth profile for smooth operation
Precision manufactured double set screw holes for the fitment of set screws either side of the motor shaft for extra secure fitting
For fitment to 5mm motor shaft
This product was added to our catalog on December 12, 2021
Product Details
This tough steel 18T 0.8 Module Safe-D Pinion Gear is the perfect part to carry in your RC tool box
Features
Strong and durable steel for long-lasting performance in extreme RC conditions - Precision manufactured wide tooth profile for smooth operation - 'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out - Suits 5mm motor shaft diameter - Precision manufactured threaded set-screw hole - E-clip supplied for motor shaft pinion retention
Includes
1 x 18T 0.8 Module Safe-D Pinion Gear
1 x Set Screw - M4 x 4mm
1 x E-Clip - 3.2mm
ARA311002, Arrma Safe-D5 Steel Mod 0.8 Pinion Gear (19T)
Arrma Safe-D5 Steel Mod 0.8 Pinion Gears feature a D shaped hole that locks onto the motor shaft and helps to prevent the loss of drive and brakes if the set screw backs out. These gears are machined from steel for durability and fit 5mm motor shafts.
Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision manufactured wide tooth profile for smooth operation
'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out
Suits 5mm motor shaft diameter
Precision manufactured threaded set-screw hole
E-clip supplied for motor shaft pinion retention
Includes:
0.8 Module Safe-D Pinion Gear
(1) Set Screw - M4 x 4mm
(1) E-Clip - 3.2mm
This product was added to our catalog on January 19, 2021
ARA311007, Arrma Safe-D5 Steel Mod 0.8 Pinion Gear (24T)
Arrma Safe-D5 Steel Mod 0.8 Pinion Gears feature a D shaped hole that locks onto the motor shaft and helps to prevent the loss of drive and brakes if the set screw backs out. These gears are machined from steel for durability and fit 5mm motor shafts.
Fits:
Arrma Big Rock 3S BLX
Arrma Granite 3S BLX
Arrma Senton 3S BLX
Arrma Typhon 3S BLX
Arrma Vendetta 3S BLX
Arrma Vorteks 3S BLX
Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision manufactured wide tooth profile for smooth operation
'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out
Suits 5mm motor shaft diameter
Precision manufactured threaded set-screw hole
E-clip supplied for motor shaft pinion retention
Includes:
0.8 Module Safe-D Pinion Gear
(1) Set Screw - M4 x 4mm
(1) E-Clip - 3.2mm
This product was added to our catalog on April 18, 2021
Product Details
This tough steel 27T 0.8 Module Safe-D Pinion Gear is the perfect part to carry in your RC tool box
Features
Strong and durable steel for long-lasting performance in extreme RC conditions - Precision manufactured wide tooth profile for smooth operation - 'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out - Suits 5mm motor shaft diameter - Precision manufactured threaded set-screw hole - E-clip supplied for motor shaft pinion retention
Includes
1 x 27T 0.8 Module Safe-D Pinion Gear
1 x Set Screw - M4 x 4mm
1 x E-Clip - 3.2mm
ARA311013, 30T 0.8Mod Safe-D5 Pinion Gear
Product Details
This tough steel 30T 0.8 Module Safe-D Pinion Gear is the perfect part to carry in your RC tool box
Features
Strong and durable steel for long-lasting performance in extreme RC conditions - Precision manufactured wide tooth profile for smooth operation - 'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out - Suits 5mm motor shaft diameter - Precision manufactured threaded set-screw hole - E-clip supplied for motor shaft pinion retention
Includes
1 x 30T 0.8 Module Safe-D Pinion Gear
1 x Set Screw - M4 x 4mm
1 x E-Clip - 3.2mm
Product Specifications
Part Type
Gears
ARA311041, Arrma Safe-D8 Mod1 Pinion Gear (21T)
Arrma Safe-D8 Mod1 Pinion Gears feature a "D" shaped hole that allows the motor shaft to key inside the pinion gear, eliminating the loss of drive and brakes if the set screws comes loose. This tough steel Pinion Gear is available in multiple tooth count options, allowing you to fine tune the gear ratio. Use the pull down menu above to pick the pinion gear for your application.
Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision manufactured wide tooth profile for smooth operation
'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out
Suits 8mm motor shaft diameter
Precision manufactured threaded set-screw hole
E-clip supplied for motor shaft pinion retention
Includes:
(1) Mod1 Safe-D Pinion Gear
(1) Set Screw - 4x4mm
(1) E-Clip - 5.6mm
This product was added to our catalog on December 29, 2022
ARA311043, Arrma Safe-D8 Mod1 Pinion Gear (23T)
Arrma Safe-D8 Mod1 Pinion Gears feature a "D" shaped hole that allows the motor shaft to key inside the pinion gear, eliminating the loss of drive and brakes if the set screws comes loose. This tough steel Pinion Gear is available in multiple tooth count options, allowing you to fine tune the gear ratio. Use the pull down menu above to pick the pinion gear for your application.
Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision manufactured wide tooth profile for smooth operation
'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out
Suits 8mm motor shaft diameter
Precision manufactured threaded set-screw hole
E-clip supplied for motor shaft pinion retention
Includes:
(1) Mod1 Safe-D Pinion Gear
(1) Set Screw - 4x4mm
(1) E-Clip - 5.6mm
This product was added to our catalog on December 29, 2022
ARA311050, Arrma Safe-D8 Mod1 Pinion Gear (30T)
Arrma Safe-D8 Mod1 Pinion Gears feature a "D" shaped hole that allows the motor shaft to key inside the pinion gear, eliminating the loss of drive and brakes if the set screws comes loose. This tough steel Pinion Gear is available in multiple tooth count options, allowing you to fine tune the gear ratio. Use the pull down menu above to pick the pinion gear for your application.
Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision manufactured wide tooth profile for smooth operation
'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out
Suits 8mm motor shaft diameter
Precision manufactured threaded set-screw hole
E-clip supplied for motor shaft pinion retention
Includes:
(1) Mod1 Safe-D Pinion Gear
(1) Set Screw - 4x4mm
(1) E-Clip - 5.6mm
This product was added to our catalog on December 29, 2022
ARA311081, Arrma CNC Steel Mod 0.8 Pinion Gear (1/8" Bore) (19T)
This is an Arrma CNC Steel Mod 0.8 Pinion Gear intended for use with the Infraction 4WD MEGA Truck. This pinion uses a 1/8" bore and is a Mod 0.8 gear pitch. Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision CNC machined
Wide tooth profile for smooth operation
Suits 1/8" (3.175mm) motor shaft diameter
Laser etched with tooth count for easy identification
Precision manufactured threaded set-screw hole
4x4mm set screw included
Includes:
(1) 0.8 Mod Pinion Gear
(1) Set Screw (4x4mm)
This product was added to our catalog on August 5, 2022
ARA311113, Arrma Infraction MEGA Composite Motor Mount Set
Arrma Infraction MEGA Composite Motor Mount Set. This replacement motor mount set is intended for the Arrma Infraction MEGA. Made from high quality composite, this motor mount is designed to provide long lasting durability. Package includes one motor mount and one gear cover.Features:
Sliding motor position design allows for fine-tuning of the gear ratio using different sized pinions
Gear cover has been revised to offer clearance for longer motor shafts and bigger pinions
Designed to add protection to spur, pinion and slipper clutch from dirt and debris
Tough composite material for long-lasting durability
This product was added to our catalog on December 10, 2023
ARAC7778, AR310478 Steel Pinion Gear 17T Mod1 5mm
Product Details
This super-tough steel 17T MOD1 Pinion Gear provides a direct replacement for your stock item.
Features
Strong and durable steel for long-lasting performance in extreme RC conditions - Precision manufactured tooth profile for smooth operation - Precision manufactured double set screw holes for the fitment of set screws either side of the motor shaft for extra secure fitting - For fitment to 5mm motor shaft
Includes
1 x Steel 17T MOD1 Pinion Gear
2 x M4x4mm Set Screws
Product Specifications
Manufacturer #
AR310478
Part Type
Gears
