Products
ARRMA ARAC7875, AR310424 Pinion Gear 15T 0.8mod 4x4
ARAC7875, AR310424 Pinion Gear 15T 0.8mod 4x4
$5.99
ARRMA ARAC7878, AR310876 Pinion Gear 20T 0.8 Mod 4x4 BLX 3S
ARAC7878, AR310876 Pinion Gear 20T 0.8 Mod 4x4 BLX 3S
$6.59
ARRMA ARAC7997, AR310421 Pinion Gear 32dp 15T
ARAC7997, AR310421 Pinion Gear 32dp 15T
$5.99
ARRMA ARAC7998, AR310372 Pinion Gear 48P 15T
ARAC7998, AR310372 Pinion Gear 48P 15T
$5.99
ARRMA Arrma Safe-D5 Mod1 Pinion Gear
Arrma Safe-D5 Mod1 Pinion Gear Arrma Safe-D5 Mod1 Pinion Gears feature a "D" shaped hole that allows the motor shaft to key inside the pinion gear, eliminating the loss of drive and brakes if the set screws comes loose. This tough steel Pinion Gear is available in multiple tooth count options, allowing you to fine tune the gear ratio. Features: Strong and durable steel for long-lasting performance in extreme RC conditions Precision manufactured wide tooth profile for smooth operation 'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out Suits 5mm motor shaft diameter Precision manufactured threaded set-screw hole E-clip supplied for motor shaft pinion retention Includes: (1) Mod1 Safe-D Pinion Gear (1) Set Screw - M4 x 4mm (1) E-Clip - 3.2mm This product was added to our catalog on March 14, 2021
$14.99
ARRMA Arrma Safe-D5 Steel Mod 0.8 Pinion Gear
Arrma Safe-D5 Steel Mod 0.8 Pinion Gears feature a D shaped hole that locks onto the motor shaft and helps to prevent the loss of drive and brakes if the set screw backs out. These gears are machined from steel for durability and fit 5mm motor shafts. Features: Strong and durable steel for long-lasting performance in extreme RC conditions Precision manufactured wide tooth profile for smooth operation 'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out Suits 5mm motor shaft diameter Precision manufactured threaded set-screw hole E-clip supplied for motor shaft pinion retention Includes: 0.8 Module Safe-D Pinion Gear (1) Set Screw - M4 x 4mm (1) E-Clip - 3.2mm This product was added to our catalog on March 23, 2021
$14.99
Axial AXIC0722, AX30722 Pinion Gear 32P 11T Steel 3mm Motor Shaft
AXIC0722, AX30722 Pinion Gear 32P 11T Steel 3mm Motor ShaftT
$6.99
CRC Products CLN64048, CRC "Gold Standard" 64P Aluminum Pinion Gear (48T)
CLN64048, CRC "Gold Standard" 64P Aluminum Pinion Gear (48T) CRC "Gold Standard" 64P Aluminum Pinion Gears are super lightweight, true and precision CNC machined in 7075 aluminum, then hard-coat anodized. All unnecessary material has been removed in an effort to produce the lightest pinion available. The face is undercut all the way out to the teeth diameter. Then on the larger pinions, the undercut face is scalloped in a triangle design to remove even more material. Complete with a 5-40 UNC set screw (1/16 inch wrench), each gear has the tooth number laser etched on the barrel, and the gears are available in a variety of tooth count options. Please choose from the pull down menu above. This product was added to our catalog on December 16, 2021
$6.99
Castle Creations CSE010-0065-09, Castle Creations Mod 1 Pinion Gear w/5mm Bore (15T)
CSE010-0065-09, Castle Creations Mod 1 Pinion Gear w/5mm Bore (15T) This is a Castle Creations Mod 1 CC Pinion Gear. High power applications require a reliable way to get the power from the motor to the drivetrain. Manufactured from hardened steel, with a Mod 1 tooth profile and 5mm bore, these pinions are ideal for 1/8 scale electric applications. Choose from 11T, 13T, 15T, 17T, 19T, 21T, or 23T tooth count. This product was added to our catalog on April 30, 2021
$12.99
Castle Creations CSE010-0065-10, Castle Creations Mod 1 Pinion Gear w/5mm Bore (17T)
CSE010-0065-10, Castle Creations Mod 1 Pinion Gear w/5mm Bore (17T) This is a Castle Creations Mod 1 CC Pinion Gear. High power applications require a reliable way to get the power from the motor to the drivetrain. Manufactured from hardened steel, with a Mod 1 tooth profile and 5mm bore, these pinions are ideal for 1/8 scale electric applications. Choose from 11T, 13T, 15T, 17T, 19T, 21T, or 23T tooth count. This product was added to our catalog on October 30, 2021
$14.99
Castle Creations CSE010-0065-11, Castle Creations Mod 1 Pinion Gear w/5mm Bore (19T)
CSE010-0065-11, Castle Creations Mod 1 Pinion Gear w/5mm Bore (19T) This is a Castle Creations Mod 1 CC Pinion Gear. High power applications require a reliable way to get the power from the motor to the drivetrain. Manufactured from hardened steel, with a Mod 1 tooth profile and 5mm bore, these pinions are ideal for 1/8 scale electric applications. Choose from 11T, 13T, 15T, 17T, 19T, 21T, or 23T tooth count. This product was added to our catalog on 03/08/2022
$12.99
Castle Creations CSE010-0065-13, Castle Creations Mod 1 Pinion Gear w/5mm Bore (23T)
CSE010-0065-13, Castle Creations Mod 1 Pinion Gear w/5mm Bore (23T) This is a Castle Creations Mod 1 CC Pinion Gear. High power applications require a reliable way to get the power from the motor to the drivetrain. Manufactured from hardened steel, with a Mod 1 tooth profile and 5mm bore, these pinions are ideal for 1/8 scale electric applications. Choose from 11T, 13T, 15T, 17T, 19T, 21T, or 23T tooth count. This product was added to our catalog on October 30, 2021
$12.99
Castle Creations CSE010-0065-24, Castle Creations Mod 1.5 Pinion Gear w/8mm Bore (14T)
CSE010-0065-24, Castle Creations Mod 1.5 Pinion Gear w/8mm Bore (14T) This is a Castle Creations Mod 1.5 CC Pinion Gear. High power applications require a reliable way to get the power from the motor to the drivetrain. Manufactured from hardened steel, with a Mod 1.5 tooth profile and 8mm bore, these pinions are ideal for 1/5 scale electric applications. Choose from 12T, 14T, 16T, or 18T tooth count. This product was added to our catalog on December 16, 2021
$15.99
Castle Creations CSE010-0065-32, Castle Creations Mod 1 Pinion Gear w/8mm Bore (32T)
CSE010-0065-32, Castle Creations Mod 1 Pinion Gear w/8mm Bore (32T) This is the Castle Creations Mod 1 Pinion Gear with 8mm Bore. Designed to offer a high strength 8mm bore option for large scale vehicles, this Mod 1 pinion has been constructed from carbon steel. This incredibly strong material matched with the precision of being CNC machined and a high wear case-hardened finish gives you a top tier pinion option. Package includes one pinion gear with set screw. This product was added to our catalog on April 18, 2021
$20.99
Castle Creations CSE010-0065-33, Castle Creations Mod 1 Pinion Gear w/8mm Bore (34T)
CSE010-0065-33, Castle Creations Mod 1 Pinion Gear w/8mm Bore (34T) Castle Creations Mod 1 Pinion Gear with 8mm Bore. Designed to offer a high strength 8mm bore option for large scale vehicles, this Mod 1 pinion has been constructed from carbon steel. This incredibly strong material matched with the precision of being CNC machined and a high wear case-hardened finish gives you a top tier pinion option. Package includes one pinion gear with set screw. This product was added to our catalog on January 14, 2023
$22.99
Castle Creations CSE010006506, CC Pinion 32P, 28T, 010-0065-06
CSE010006506, CC Pinion 32P, 28T, 010-0065-06 This item was added to our catalog March 2, 2022
$12.99
Castle Creations CSE010006531, Castle Creations Mod 1 Pinion Gear w/8mm Bore (30T)
CSE010006531, Castle Creations Mod 1 Pinion Gear w/8mm Bore (30T)
$21.99
Castle Creations CSE010006534, Castle Creations Mod 1 Pinion Gear w/8mm Bore (36T)
CSE010006534, Castle Creations Mod 1 Pinion Gear w/8mm Bore (36T)
$22.99
Castle Creations CSE010006535, Castle Creations Mod 1 Pinion Gear w/8mm Bore (38T)
CSE010006535, Castle Creations Mod 1 Pinion Gear w/8mm Bore (38T)
$23.99
Castle Creations CSE010006537, Castle Creations Mod 1 Pinion Gear w/8mm Bore (44T)
CSE010006537, Castle Creations Mod 1 Pinion Gear w/8mm Bore (44T)
$24.99
Castle Creations CSE010006538, Castle Creations Mod 1 Pinion Gear w/8mm Bore (48T)
Castle Creations Mod 1 Pinion Gear w/8mm Bore (48T)
$24.99
Castle Creations CSE011416536, Castle Creations Mod 1 Pinion Gear w/8mm Bore (40T)
CSE011416536, Castle Creations Mod 1 Pinion Gear w/8mm Bore (40T)
$24.99
Dynamite DYNS1217, Dynamite SCX24 Motor w/Pinion
DYNS1217, Dynamite SCX24 Motor w/Pinion The Dynamite SCX24 Motor with Pinion is a replacement motor intended for use with the Axial 1/24 Scale Deadbolt Mini Crawler. This package contains one motor with pinion and two screws. This product was added to our catalog on June 5, 2021
$9.00
Furitek FTK-FUK-2060, Furitek Micro 2.5A BEC
FTK-FUK-2060, Furitek Micro 2.5A BEC This product was added to our catalog on October 6, 2022
$15.99
Furitek FTK-FUR-2076, Furitek SCX24 Chameleon Brushed Motor w/Motor Mount & Pinion (80T)
FTK-FUR-2076, Furitek SCX24 Chameleon Brushed Motor w/Motor Mount & Pinion (80T) The Furitek SCX24 Chameleon Brushed Motor with Motor Mount and Pinion is a great option to increase the performance of your Axial SCX24. This motor features a brass pinion gear and metal and carbon brush technology allowing for a smooth power delivery. Completing the set is the Furitek carbon fiber motor mount for extreme performance and weight savings. Features: Direct fit for the Axial SCX24 Motor mount is made from high quality carbon fiber Includes 11T brass pinion gear Motor uses metal and carbon brush technology Specifications: Voltage: 2-3S LiPo Turn: 80T Motor Length: 26.8mm Motor Diameter: 15.5mm Motor Weight: 18.3g Includes: (1) 80T Brushed Motor (1) 11T Brass Pinion (1) Carbon Fiber Motor Mount This product was added to our catalog on March 2, 2022
$19.99
Furitek FTK-FUR-2102, Furitek SCX24 Stinger Brushless Power System w/1212-3450kV Brushless Motor
FTK-FUR-2102, Furitek SCX24 Stinger Brushless Power System w/1212-3450kV Brushless Motor The Furitek SCX24 Stinger Brushless Power System with 1212-3450kV Brushless Motor is a great way to get a light weight, high torque power system. This incredible combo includes the Furitek Micro Komodo Motor (FTK-FUR-2100). Don't let the size of this motor fool you, this 12-pole motor was specifically designed to provide high torque at low RPM. The included Lizard Pro ESC allows you to get the most out of this small but mighty motor.Features: Designed specifically for the Axial SCX24 Includes the Furitek Micro Komodo Motor FTK-FUR-2100 12-pole motor design allows for high torque at low RPM Includes Micro Komodo Motor Mount Includes the Furitek Lizard Pro ESC Includes: (1) Lizard Pro 30A/50A Brushed/Brushless ESC (1) Bluetooth module (1) Micro Komodo 1212-3450KV brushless motor (1) 11T 0.3M CNC Brass Pinion (1) CNC aluminum motor mount This product was added to our catalog on April 14, 2022
$129.99
Furitek FTK-FUR-2216, Furitek Greyhound 1410 Sensorless Brushless Motor (4500Kv)
FTK-FUR-2216, Furitek Greyhound 1410 Sensorless Brushless Motor (4500Kv) Furitek Greyhound Greyhound 1410 Sensorless Brushless Motor. This optional motor is a great upgrade to the Kyosho Mini-Z chassis. When paired with the Furitek Momentum ESC (not included), you can have extreme high end performance with advanced tuning options. Package includes one brushless motor.Features: 2 Pole strong magnetic rotor hi-torque motor design High purity and higher temperature copper windings, lower copper losses, maximizes efficiency Super thin (0.2 mm) stator lamination further maximizes efficiency High RPM ABEC5 bearings Precision balanced rotor, smoothness for best reliability and maximum 60,000 RPM CNC machined 6061 T6 aluminum heat sink vein can design Precision engineered for maximum energy conversion Special designed end cap with side locking screws that firmly secures the end cap and PCB Specifications:Voltage: 2-3SkV: 5500No-Load Current: 0.3AMax Current: 9AWatts: 80WResistance: 0.7ohmSize: 15x25mmWeight: 17g This product was added to our catalog on October 6, 2022
$34.99
Hot Racing HRANSG3227, Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear w/5mm Bore (27T)
HRANSG3227, Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear w/5mm Bore (27T) Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear. These pinion gears are an essential upgrade for your UDR. Precision machined hardened steel, combined with a black nitride coating help to make the gear durable, and with the availability of multiple tooth count options you have the gears to tune your ratio for a variety of conditions. Features: CNC machined Hardened steel to increased wear resistance and improve fatigue life Nitride coating to enhanced hardness and corrosion resistance 5mm Bore 32 pitch NOTE: 32 standard pitch is the same as 0.8 mod Includes: (1) pinion gear (1) M5x5mm set screw This product was added to our catalog on December 16, 2021
$12.99
Hot Racing HRANSG3234, Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear w/5mm Bore (34T)
HRANSG3234, Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear w/5mm Bore (34T) Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear. These pinion gears are an essential upgrade for your UDR. Precision machined hardened steel, combined with a black nitride coating help to make the gear durable, and with the availability of multiple tooth count options you have the gears to tune your ratio for a variety of conditions. Features: CNC machined Hardened steel to increased wear resistance and improve fatigue life Nitride coating to enhanced hardness and corrosion resistance 5mm Bore 32 pitch NOTE: 32 standard pitch is the same as 0.8 mod Includes: (1) pinion gear (1) M5x5mm set screw This product was added to our catalog on December 16, 2021
$12.99
Hot Racing HRASTE252, Hot Racing Traxxas 32P Steel Spur Gear (Red) (52T)
HRASTE252, Hot Racing Traxxas 32P Steel Spur Gear (Red) (52T) This is an optional Hot Racing Traxxas 32P 52T Steel Spur Gear with Red hardware for the 1/10 Traxxas Bandit, Rustler, 2WD Slash, 2WD Stampede, and Telluride vehicles. Features: CNC machined and lightened hardened steel construction Replaces stock nylon spur gear Rugged 0.8 Module/32pitch teeth for total reliability on brushless power Black oxide coated gear for durability and corrosion resistance Red anodized countersunk aluminum washers High strength hardware Specifications: Number of Teeth: 52 Gear Pitch: 32 pitch (0.8 module) Mounting Holes: 3 Tooth Face width: ~5mm Includes: (1) 52 tooth 32 pitch (0.8 Mod) spur gear (3) mounting screws (3) red anodized countersunk washers (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate) This product was added to our catalog on May 4, 2021
$19.99
Hot Racing HRASTE256, Hot Racing Traxxas 32P Steel Pinion & Spur Gear Set (Purple) (18T/56T) (Slash, Rustler, Stampede, Bandit)
HRASTE256, Hot Racing Traxxas 32P Steel Pinion & Spur Gear Set (Purple) (18T/56T) Hot Racing Traxxas 32P Steel Pinion & Spur Gear Set (Purple) (18T/56T) (Slash, Rustler, Stampede, Bandit) This is an optional Hot Racing 32 Pitch Steel Pinion and Spur Gear Set for use with the following Traxxas 2WD models: Bandit, Rustler, Slash and Stampede. Features: CNC machined and lightened hardened steel construction Replaces stock nylon spur gear Rugged 0.8 Module/32pitch teeth for total reliability on brushless power Aluminum pinion sleeve to allow for either 1/8 inch or 5mm motor shafts Black oxide coated gear for durability and corrosion resistance Purple anodized countersunk aluminum washers High strength hardware Specifications: Number of Teeth: 18T/56T Gear Pitch: 32 pitch (0.8 module) Mounting Holes: 3 Tooth Face width: ~5mm Includes: (1) 18 tooth 32 pitch (0.8 Mod) pinion gear (1) 56 tooth 32 pitch (0.8 Mod) spur gear (3) mounting screws (3) purple anodized countersunk washers (1) pinion adapter sleeve (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate) This product was added to our catalog on March 16, 2021
$25.99
ProTek RC PTK-8069, ProTek RC Steel Mod 1 Pinion Gear (5mm Bore) (16T)
PTK-8069, ProTek RC Steel Mod 1 Pinion Gear (5mm Bore) (16T) ProTek R/C Steel Mod 1 Pinion Gears are an affordable pinion gear option that doesn't skimp on quality. CNC machined from hardened steel material, these precision cut gears are durable and are perfect for any Mod 1 pitch application. Available in 11 - 20 tooth variants, these gears feature a 5mm bore with the tooth count engraved on the gear for easy identification. Plus, each gear includes a setscrew to make installation easy. This product was added to our catalog on December 16, 2021
$5.99
ProTek RC PTK-8073, ProTek RC Steel Mod 1 Pinion Gear (5mm Bore) (20T)
PTK-8073, ProTek RC Steel Mod 1 Pinion Gear (5mm Bore) (20T) ProTek R/C Steel Mod 1 Pinion Gears are an affordable pinion gear option that doesn't skimp on quality. CNC machined from hardened steel material, these precision cut gears are durable and are perfect for any Mod 1 pitch application. Available in 11 - 20 tooth variants, these gears feature a 5mm bore with the tooth count engraved on the gear for easy identification. Plus, each gear includes a setscrew to make installation easy. This product was added to our catalog on December 16, 2021
$8.99
Tamiya TAM50355, Tamiya 48P AV Pinion Gear Set (18/19T)
TAM50355, Tamiya 48P AV Pinion Gear Set (18/19T) This is the Tamiya MOD 0.6 AV Pinion Gear Set, including one 18 tooth and one 19 tooth pinion gear. This product was added to our catalog on December 16, 2021
$7.99
Traxxas TRA1918, Traxxas 48P Pinion Gear (18T)
TRA1918, Traxxas 48P Pinion Gear (18T) This product was added to our catalog or updated on April 4, 2022
$3.00
Traxxas TRA3917, Traxxas Gear 15-T Pinion 32P 3Mm Shaft/Set Screw
TRA3917, Traxxas Gear 15-T Pinion 32P 3Mm Shaft/Set Screw This product was added to our catalog on September 7, 2021
$5.99
Traxxas TRA4725, Traxxas 48P Pinion Gear (25T)
TRA4725, Traxxas 48P Pinion Gear (25T) This product was added to our catalog on September 7, 2021
$3.00
Traxxas TRA4728, Traxxas 48P Pinion Gear (28T)
TRA4728, Traxxas 48P Pinion Gear (28T) 28-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. This product was added to our catalog on September 7, 2021
$3.00
Traxxas TRA6447, Traxxas Mod 1.0 Spur Gear (46T)
TRA6447, Traxxas Mod 1.0 Spur Gear (46T) This product was added to our catalog on September 7, 2021
$3.00
Traxxas TRA6492, Traxxas Steel Mod 1.0 Pinion Gear w/5mm Bore (29T)
TRA6492, Traxxas Steel Mod 1.0 Pinion Gear w/5mm Bore (29T) Traxxas Mod 1 Pinion Gear. These gears are intended for use with the Traxxas XO-1 and are available in a variety of tooth count options to fine tune torque and top speed. Package includes one pinion gear and one set screw. This product was added to our catalog on May 26, 2021
$5.00
Traxxas TRA6493, Traxxas Steel Mod 1.0 Pinion Gear w/5mm Bore (34T)
TRA6493, Traxxas Steel Mod 1.0 Pinion Gear w/5mm Bore (34T) Traxxas Mod 1 Pinion Gear. These gears are intended for use with the Traxxas XO-1 and are available in a variety of tooth count options to fine tune torque and top speed. Package includes one pinion gear and one set screw. This product was added to our catalog on May 7, 2021
$6.00
Traxxas TRA6745, Traxxas Steel 32P Pinion Gear (9T)
TRA6745, Traxxas Steel 32P Pinion Gear (9T) Traxxas Steel 32 Pitch Pinion Gear. These gears are intended for use with the Traxxas Stampede 4x4 and are available in multiple tooth count options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one set screw. This product was added to our catalog on September 7, 2021
$3.50
Traxxas TRA6746, PINION GEAR 10-T 32-P STEEL
TRA6746, PINION GEAR 10-T 32-P STEELThis product was added to our catalog on September 7, 2021
$3.50
Traxxas TRA6747, Traxxas Steel 32P Pinion Gear (11T)
TRA6747, Traxxas Steel 32P Pinion Gear (11T) Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 11-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. This product was added to our catalog on May 7, 2021
$3.50
Traxxas TRA7592, Traxxas LaTrax Pinion Gear (14T)
TRA7592, Traxxas LaTrax Pinion Gear (14T) This product was added to our catalog on May 7, 2021
$3.00
Traxxas TRA7644, Traxxas LaTrax Pinion Gear (9T)
TRA7644, Traxxas LaTrax Pinion Gear (9T) This product was added to our catalog on September 7, 2021
$2.50
Traxxas TRA7645, Traxxas LaTrax Pinion Gear (10T)
TRA7645, Traxxas LaTrax Pinion Gear (10T) Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models: 1/18 LaTrax Desert Prerunner 1/18 LaTrax Rally 1/18 LaTrax Teton This product was added to our catalog on September 7, 2021
$2.50
Traxxas TRA9637A, Steering blocks, left & right/ steering block arms (aluminum, dark titanium-anodized) (2)/ 3x18mm CS (2)/ M3x0.5mm NL (2)
Steering blocks, left & right/ steering block arms (aluminum, dark titanium-anodized) (2)/ 3x18mm CS (2)/ M3x0.5mm NL (2)
$15.00
You have seen 96 out of 104 products