01102213-1, Futaba, SBS-01T Temperature Sensor
This is an optional Futaba SBS-01T Temperature Sensor. This sensor simply plugs into the S.Bus2 slot on telemetry-enabled receivers, which transmit data directly to FASSTest systems.
Monitor temperatures on engines, motors, mufflers and batteries - nearly anything that radiates heat!
Specifications:Range: -4 to 392° F (-20 to 200°C)Weight: 0.16 oz (4.6g)Size: 535mm
This product was added to our catalog on March 15, 2023
01102289-1, Futaba, SBS-01V External Battery Voltage Sensor
This is the Futaba SBS-01RO Optical RPM Sensor. Getting the performance information you want has never been easier, lighter or more convenient! This sensor plugs into the S.Bus2 slot on telemetry-enabled receivers, and transmits the data directly to FASSTest systems.
Specifications:
Displays: revolutions per minute
Range: 360-300,000
Weight: 0.17 oz (4.9 g)
This product was added to our catalog on February 25, 2023
Sweep Max Forward 17mm Hex 1/8 Mounted GT Foam Tires have been specially developed for 1/8 scale drag racing and speed run applications. These pre-mounts feature a specially designed wheel, and high density foam that have been bonded using a proprietary process that eliminates the need for further balancing. This creates a tire that is perfectly trued, and perfectly balanced, so they are ready to rip right out of the package.Features:
MAX-FLAT Wheels: This wheel is specially made ONLY for Drag racing/Speed runs. This is not an off-road buggy wheel that will squat at the launch and wobble at the finish line. Flat face 17mm hex wheel with a 1mm edge that protects tires while side by side racing.
Foam: Made out of race proven high density foams, that is long lasting and durable yet provides high traction.
Gluing/Mounting Process: Each wheel and tire is mounted on a special machine, and have been sanded and trued to perfection by people with decades of experience in foam tires fabricating. Requires no further balancing.
Finished product: MAXIMUM grip, LONGER LIFE TIRES!
Race at your own risk!
Compound Applications:
X-HARD: Recommended for 90deg F to hotter, or SPEED RUNS
HARD: Recommended for 85F or higher
MEDIUM: Recommended for 70deg-90deg F
SOFT: Recommended for temps below 70deg, or when maximum grip is desired
Specifications:Weight: 80-86 grams (approx.)Diameter: 105mmWidth: 45mmApplication: 1/8 drag racing & speed run
Sweep Max Forward 17mm Hex 1/8 Mounted GT Foam Tires have been specially developed for 1/8 scale drag racing and speed run applications. These pre-mounts feature a specially designed wheel, and high density foam that have been bonded using a proprietary process that eliminates the need for further balancing. This creates a tire that is perfectly trued, and perfectly balanced, so they are ready to rip right out of the package.Features:
MAX-FLAT Wheels: This wheel is specially made ONLY for Drag racing/Speed runs. This is not an off-road buggy wheel that will squat at the launch and wobble at the finish line. Flat face 17mm hex wheel with a 1mm edge that protects tires while side by side racing.
Foam: Made out of race proven high density foams, that is long lasting and durable yet provides high traction.
Gluing/Mounting Process: Each wheel and tire is mounted on a special machine, and have been sanded and trued to perfection by people with decades of experience in foam tires fabricating. Requires no further balancing.
Finished product: MAXIMUM grip, LONGER LIFE TIRES!
Race at your own risk!
Compound Applications:
X-HARD: Recommended for 90deg F to hotter, or SPEED RUNS
HARD: Recommended for 85F or higher
MEDIUM: Recommended for 70deg-90deg F
SOFT: Recommended for temps below 70deg, or when maximum grip is desired
Specifications:Weight: 80-86 grams (approx.)Diameter: 105mmWidth: 45mmApplication: 1/8 drag racing & speed run
7PXR Transmitter – Super Response Digital Proportional RC System
For Use with Surface Models (01004395-3) (01004396-3)
FEATURES
FULL COLOR TOUCH SCREEN LCD:T7PXR has an HVGA 4.3 inch, full-color, backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility.
T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. (SR system does not support telemetry function.)
UPDATEABLE SOFTWARE:Software can be updated by microSD card. Model data can also be saved in a microSD card. In addition, telemetry log data can be saved.
MODEL MEMORY FOR 40 MODELS:Model names can use up to 15 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function.
NFC COMMUNICATION:It is possible to update the T7PXR itself in the future by NFC communication.
INTEGRAL TYPE DIAL SWITCH:A switch with both dial (DL1) and pus switch (PS6) functions.
BRAKE MIXING FOR LARGE CARS:Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently.
STEERING MIXING:Smooth cornering is possible by independent left and right steering servo setting.
4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE:This function can be used with crawlers and other 4WS type vehicles.
DUAL ESCS MIXING FOR CRAWLERS CARS:ESCs at the front and rear are controlled independently.
GYRO MIXING:The sensitivity of Futaba car rate gyros can be adjusted from the T7PXR.
TANK MIXING:This function is intended for vehicles such as tanks.
CPS-1 MIXING:LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only.
S.BUS SERVO:This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software.
MC-LINK:This dedicated function allows you set up the Link software so that your T7PXR can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR, etc.
THROTTLE SPEED:Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption.
STEERING SPEED :When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted.
NON-TELEMETRY LED:When the telemetry function is OFF to confirm that the telemetry function is not operating.
DIAL SELECT FUNCTION:This function assigns functions to dials (digital trim, drip dial, knob). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital.
SWITCH SELECT FUNCTION:This function assigns functions to 5 switches. The operating directions can also be set.
WHEEL AND TRIGGER POSITION CAN BE CHANGED:The wheel position can be offset by using an accessory APA wheel position offset adapter. The wheel angle can also be adjusted. The position of the throttle trigger can be moved forward and backward.
TRIGGER BRAKE LEVER REPLACEMENT:The trigger brake lever is selected from a narrow nylon type and wide type.
TRIM/DIAL LOCK FUNCTIONS:Lock functions which prohibit setting and operating by transmitter trim, and dials are provided.
LEFT-HANDED SUPPORT:The left and right installation direction of the wheel section can be reversed.
VIBRATOR BUILT INTO THE GRIP:The vibrator can be operated at racing timer lap navigation, time-up, and low battery, telemetry alarm. It sets it on each function screen.
CONTENTS
YOUR T7PXR INCLUDES THE FOLLOWING COMPONENTS:
-T7PXR Transmitter
-R334SBS OR R334SBS-E Receiver
-Dry Battery Holder
-Wheel Offset Adapter
-Wheel Adapter 32deg
-Large Diameter Steering Wheel (54 mm)
-Trigger Brake Lever (Narrow Type)
-Miniature Screwdriver
-Screen Protector
-3 x Receiver Plugs
TRANSMITTER SPECS
WHEEL SYSTEM, 7 CHANNELS (S-FHSS SYSTEM), 4 CHANNELS WITH TFHSS-SR, T-FHSS, FASST SYSTEM
TRANSMITTING FREQUENCIES:2.4 GHz band/ -Transmitting RF power output: 100 mW EIRP
PROTOCOLS:T-FHSS SR/T-FHSS/S-FHSS/FASST-C2
POWER REQUIREMENT:Ni-MH – NT5F1800B (6 V)LiFe – FT2F1700BV2 (6.6 V)
CURRENT DRAIN:350 mA or less (When the T-FHSS, Vibration off, back lighting on)
TRANSMITTING ANTENNA:1/2λ dipole
4.3 INCH BACKLIGHTED COLOR TFT LIQUID CRYSTAL TOUCH PANEL**When you turn on your 7PXR, bright dots may appear on your screen display. Your display contains an extremely large number of TFT and is manufactured using high-precision technology. Any bright dots that may appear on your display are intrinsic of the TFT manufacturing technology.
RECEIVER SPECS
R334SBS
T-FHSS SR
SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in
WEIGHT:7.5 g0.26 oz
OPERATING VOLTAGE:DC 3.7V-7.4V
R334SBS-E
T-FHSS SR
SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in
WEIGHT:7.2 g0.25 oz
OPERATING VOLTAGE:DC 3.7V-7.4V
7PXR US Limited Edition Transmitter – Super Response Digital Proportional RC System
For Use with Surface Models (01004407-3) (01004406-3)
FEATURES
FULL COLOR TOUCH SCREEN LCD:T7PXR has an HVGA 4.3 inch, full-color, backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility.
T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. (SR system does not support telemetry function.)
UPDATEABLE SOFTWARE:Software can be updated by microSD card. Model data can also be saved in a microSD card. In addition, telemetry log data can be saved.
MODEL MEMORY FOR 40 MODELS:Model names can use up to 15 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function.
NFC COMMUNICATION:It is possible to update the T7PXR itself in the future by NFC communication.
INTEGRAL TYPE DIAL SWITCH:A switch with both dial (DL1) and pus switch (PS6) functions.
BRAKE MIXING FOR LARGE CARS:Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently.
STEERING MIXING:Smooth cornering is possible by independent left and right steering servo setting.
4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE:This function can be used with crawlers and other 4WS type vehicles.
DUAL ESCS MIXING FOR CRAWLERS CARS:ESCs at the front and rear are controlled independently.
GYRO MIXING:The sensitivity of Futaba car rate gyros can be adjusted from the T7PXR.
TANK MIXING:This function is intended for vehicles such as tanks.
CPS-1 MIXING:LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only.
S.BUS SERVO:This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software.
MC-LINK:This dedicated function allows you set up the Link software so that your T7PXR can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR, etc.
THROTTLE SPEED:Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption.
STEERING SPEED :When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted.
NON-TELEMETRY LED:When the telemetry function is OFF to confirm that the telemetry function is not operating.
DIAL SELECT FUNCTION:This function assigns functions to dials (digital trim, drip dial, knob). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital.
SWITCH SELECT FUNCTION:This function assigns functions to 5 switches. The operating directions can also be set.
WHEEL AND TRIGGER POSITION CAN BE CHANGED:The wheel position can be offset by using an accessory APA wheel position offset adapter. The wheel angle can also be adjusted. The position of the throttle trigger can be moved forward and backward.
TRIGGER BRAKE LEVER REPLACEMENT:The trigger brake lever is selected from a narrow nylon type and wide type.
TRIM/DIAL LOCK FUNCTIONS:Lock functions which prohibit setting and operating by transmitter trim, and dials are provided.
LEFT-HANDED SUPPORT:The left and right installation direction of the wheel section can be reversed.
VIBRATOR BUILT INTO THE GRIP:The vibrator can be operated at racing timer lap navigation, time-up, and low battery, telemetry alarm. It sets it on each function screen.
CONTENTS
YOUR T7PXR INCLUDES THE FOLLOWING COMPONENTS:
-T7PXR Transmitter
-R334SBS OR R334SBS-E Receiver
-Dry Battery Holder
-Wheel Offset Adapter
-Wheel Adapter 32deg
-Large Diameter Steering Wheel (54 mm)
-Trigger Brake Lever (Narrow Type)
-Miniature Screwdriver
-Screen Protector
-3 x Receiver Plugs
TRANSMITTER SPECS
WHEEL SYSTEM, 7 CHANNELS (S-FHSS SYSTEM), 4 CHANNELS WITH TFHSS-SR, T-FHSS, FASST SYSTEM
TRANSMITTING FREQUENCIES:2.4 GHz band/ -Transmitting RF power output: 100 mW EIRP
PROTOCOLS:T-FHSS SR/T-FHSS/S-FHSS/FASST-C2
POWER REQUIREMENT:Ni-MH – NT5F1800B (6 V)LiFe – FT2F1700BV2 (6.6 V)
CURRENT DRAIN:350 mA or less (When the T-FHSS, Vibration off, back lighting on)
TRANSMITTING ANTENNA:1/2λ dipole
4.3 INCH BACKLIGHTED COLOR TFT LIQUID CRYSTAL TOUCH PANEL**When you turn on your 7PXR, bright dots may appear on your screen display. Your display contains an extremely large number of TFT and is manufactured using high-precision technology. Any bright dots that may appear on your display are intrinsic of the TFT manufacturing technology.
RECEIVER SPECS
R334SBS
T-FHSS SR
SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in
WEIGHT:7.5 g0.26 oz
OPERATING VOLTAGE:DC 3.7V-7.4V
R334SBS-E
T-FHSS SR
SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in
WEIGHT:7.2 g0.25 oz
OPERATING VOLTAGE:DC 3.7V-7.4V
ASC21563, Team Associated Factory Team Reflex 14B/14T Metal Drive Gear Set
This is an optional Team Associated Factory Team Reflex 14B/14T Metal Drive Gear Set, intended for use with the Reflex 14B 1/14 electric buggy kit.
Includes:
(1) Metal ring gear
(1) Metal pinion gear
This product was added to our catalog on January 29, 2021
ASC31383, Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10)
This is a pack of ten Team Associated 5.5x2.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications.
These small outside diameter shims, common for on-road, are now available separately. Great for all 1/10 scale vehicles.
This product was added to our catalog on April 28, 2021
Whether you race indoor or outdoor, protecting your chassis from premature wear will improve its lifespan and help maintain performance. These Factory Team pre-cut chassis sheets are made from adhesive-backed 18-mil vinyl and offer a protective surface while looking trick with intricate details for that Factory Driver look.This part fits the following vehicles:RC10SC6.4
ASC7662, Team Associated 32P Spur Gear (81T)
Team Associated 32 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed.
This product was added to our catalog on OCTOBER 5, 2023
ASC91466, Team Associated Diff & Idler Gear Set
Team Associated Diff & Idler Gear Set. Package includes replacement gear diff case, and idler gear.
This product was added to our catalog on April 26, 2021
ASC9653, Team Associated 48P Spur Gear (81T)
Team Associated 48 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed.
This product was added to our catalog on January 29, 2022
ASC9654, Team Associated 48P Spur Gear (87T)
Team Associated 48 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed.
This product was added to our catalog on January 29, 2021
CIU-3-USB Interface
For Communication Between Link-Supported Devices (01102291-1)
INTERFACE:USB Rev 2.0 Compliant
USB CONNECTOR:USB Series A Connector
DIMENSIONS:18.2 mm x 56.5 mm x 9.0 mm0.72 in x 2.22 in x 0.35 in
WEIGHT:7.5 g0.26 oz
OPERATING VOLTAGE:5.0 V ± 0.2 V (USB Bus Power)
OPERATING ENVIRONMENT:Temperature -10 ~ 45° C
CURRENT DRAIN (AT CONNECTION, IDLE):5.8 ± 1.7 mA
APPLICABLE OS:Windows 10 / 8 / 7 / Vista
A PC-LINK ADAPTER (DOUBLE EXTENSION CORD K500) IS SUPPLIED WITH CIU-3
EXO1940, 2WD Slash Eliminator Pro Spur Mount, for Kimbrough Spur Gear
Features:
Heavy duty yet light weight slipper eliminator spur gear mounting hub for all 1/10 Traxxas 2wd Slash and Bandit buggies and trucks.
Only weighing 2.7gr, this mount deletes the slipper components, cuts out about 10gr and allows greater gearing selection for speed runs and dragster set ups.
This mount uses Kimbrough on road spurs, Exotek Flite Spurs or similar on road spurs that have a 6 bolt pattern and inner hole diameter of 9.5mm.
EXO1978, Carbon Fiber Adjustable Wheelie Bar Set, Single Wheel, fits Slash
Extra long adjustable carbon fiber wheelie bar for 2wd Slash or Bandit 2wd street eliminator cars.
Extends from 9.5" to 12.5" (axle to axle) to match NPRC race class rules.
The longer bar gives you more stability, for straighter and faster passes without needing to let off the throttle as often.
You are able to finely adjust the wheel height via the 4mm turnbuckle or make large adjustments by adding spacers under the wheel (M3 spacers not included).
Made of heavy duty 3mm carbon fiber with alloy turnbuckles and mounts and includes a ball raced machined alloy wheel with oversized rubber o-ring tire.
EXO2025, 22S HD Front Pivot, 7075 Black with Silver
Heavy duty, 7075 alloy constructed front bulkhead for the LOSI 22S Drag and SC.Machined to be heavy duty, weighs 16gr and retains the stock geometry of the kit plastic pivots.Customized polished black base with silver chamfered accents goes great with your stock plastic parts or factory alloy parts.
EXO203022S HD Steering Set, Full Bearing Style, 7075 Black and Silver
Precision pro style steering set for the Losi 22S series.Designed with a beefier structure and engineered to have the most precision thanks to the robust 7075 alloy design that incorporates an additional 4 bearings to connect the steering drag link, instead of the nylon cup, which now eliminates all flex and slop.Also includes crush sleeves that go between the bearings, which help prolong the bearing life and maintains precise fit and operation of the rack.
