Products
CEN Racing CEGCQ0225, CEN F450 Slipper Pad (2)
This is a replacement set of two CEN F450 SD Slipper Pads, intended for use with the CEN Ford F450 SD scale truck. This product was added to our catalog on February 16, 2021
$10.00
CEN Racing CEGCQ0227, CEN F450 Center Outdrive (2)
CEGCQ0227, CEN F450 Center Outdrive (2) This is a replacement set of two CEN F450 SD Center Outdrives, intended for use with the CEN Ford F450 SD scale truck. CEN Ford F250 CEN Ford F450 This product was added to our catalog on February 15, 2021
$15.00
CEN Racing CEGCQ0248, CEN F450 Slipper Spring
This is a replacement CEN F450 SD Slipper Spring, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck.
$3.00
CEN Racing CEGCQ0302, Steering Knuckle, for the Q & MT Series (2pcs)
Steering Knuckle, for the Q & MT Series (2pcs)
$9.00
CEN Racing CEGCQ0303, C-Hub A, B, for the Q & MT Series
C-Hub A, B, for the Q & MT Series
$8.00
CEN Racing CEGCQ0304, CEN F450 Straight Axle Adapter (2)
This is a replacement CEN F450 SD Straight Axle Adapter, intended for use with the CEN Ford F450 SD scale truck. Package includes two rear axle lockout straight axle adapters. This product was added to our catalog on February 16, 2021
$8.00
CEN Racing CEGCQ0305, CEN F450 4-Link Bracket
This is a replacement CEN F450 SD 4-Link Bracket, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck. This product was added to our catalog on March 15, 2021
$8.00
CEN Racing CEGCQ0306, Solid Axle Housing Cover, Front or Rear, for the Q & MT Series
Solid Axle Housing Cover, Front or Rear, for the Q & MT Series
$13.00
CEN Racing CEGCQ0311, CEN Turnbuckle M3 X 30mm, for the Q & MT Series (1pc)
CEGCQ0311, CEN Turnbuckle M3 X 30mm, for the Q & MT Series (1pc)
$3.50
CEN Racing CEGCQ0317, CEN F450 Steering Drag Link
This is a replacement CEN F450 SD Steering Drag Link, intended for use with the CEN Ford F450 SD scale truck.
$5.00
CEN Racing CEGCQ0331, 5.8mm Flanged Pivot Balls, for the Q & MT Series (16pcs)
5.8mm Flanged Pivot Balls, for the Q & MT Series (16pcs)
$6.00
CEN Racing CEGCQ0332, CEN F450 5.8mm Pivot Ball (16)
CEN F450 SD 5.8mm Pivot Balls. These are a replacement pivot ball designed for use with the CEN F450 Custom Dually. Includes: (16) Pivot Balls
$6.00
CEN Racing CEGCQ0333, CEN F450 5.8mm Rod End (6)
The CEN F450 SD 5.8mm Rod Ends. These are a replacement for the CEN Ford F450 SD. COMPATIBILITY CEN Ford F450
$5.00
CEN Racing CEGCQ0410, CEN F450 Receiver Box
This is a replacement CEN F450 SD Receiver Box, intended for use with the CEN Ford F450 SD scale truck
$12.00
CEN Racing CEGCQ0801, CEN 40 Amp Waterproof Brushed Hobbywing ESC
CEGCQ0801, CEN 40 Amp Waterproof Brushed Hobbywing ESC CEN Racing 40 Amp Waterproof Brushed Hobbywing ESC. This WP-1040 ESC is designed and produced by Hobbywing for the CEN Racing Fiat Abarth, Ford B50, Ford F450 and Suzuki Jimny models. Featuring a power switch, standard brushed motor connectors and a pre-soldered T-style connector. Package includes one brushed ESC. This product was added to our catalog on October 14, 2021
$40.00
CEN Racing CEGCQ0821, CQ0821 Savox RTR-08 Servo (12KG)
CEGCQ0821, CQ0821 Savox RTR-08 Servo (12KG) This product was added to our catalog on November 7, 2023
$30.00
CEN Racing CEGG36144, CEN F450 SD 2x8mm Flat Head Screw (10)
This is a replacement pack of ten CEN F450 SD M2x8mm Flat Head Screws, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck. This product was added to our catalog on March 15, 2021
$3.00
CEN Racing CEGG36256, CEN 3x16mm Set Screw (10)
This is a replacement pack of ten CEN 3x16mm Set Screws, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck. This product was added to our catalog on February 15, 2021
$3.00
CEN Racing CEGG36267, CEN F450 King Pin (6)
This is a replacement pack of six CEN F450 SD King Pins, intended for use with the CEN Ford F450 SD scale truck. This product was added to our catalog on March 4, 2021
$3.00
CEN Racing CEGG36268, CEN F450 Servo Saver Springs (2)
This is a replacement set of two CEN F450 SD Servo Saver Springs, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck. This product was added to our catalog on February 15, 2021
$3.00
CEN Racing CEGG36311A, CEN 3x10mm Button Head Screw (10)
This is a replacement set of ten CEN 3x10mm Button Head Screws, intended for use with the CEN Ford F450 SD scale truck. COMPATIBILITY CEN Ford B50 CEN Ford F450 CEN Reepe
$3.00
CEN Racing CEGG36401, CEN Ford F450 SD M3 Nylon Locknuts (10)
CEGG36401, CEN Ford F450 SD M3 Nylon Locknuts (10) This is a pack of ten CEN M3 Nylon Locknuts, intended for use with the CEN Ford F450 SD scale truck. This product was added to our catalog on March 4, 2022
$2.50
CEN Racing CEGG36706, CEN F450 2x8mm Pin (6)
This is a replacement pack of six CEN F450 2x8mm Pins, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck. COMPATIBILITY CEN Fiat Abarth CEN Ford B50 CEN Ford F450 CEN Suzuki Jimny
$3.00
CEN Racing CEGG36791A, CEN #6 Angled Hood Pin Body Clip (10)
CEGG36791A, CEN #6 Angled Hood Pin Body Clip (10) This is a replacement pack of ten CEN F450 #6 Angled Hood Pins, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck. This product was added to our catalog on March 15, 2021
$2.99
CEN Racing CEGG73301, CEN F450 32P Spur Gear (56T)
CEGG73301, CEN F450 32P Spur Gear (56T) This is a replacement CEN F450 32 Pitch 56 Tooth Spur Gear, intended for use with the CEN Ford F450 SD scale truck. This product was added to our catalog on February 7, 2024
$5.00
CEN Racing CEGG73601, CEN F450 5.8mm Extended Pivot Ball
This is a replacement CEN F450 5.8mm Extended Pivot Ball, intended for use with the CEN Ford F450 SD scale truck. This product was added to our catalog on February 16, 2021
$4.00
CEN Racing CEGG73901, CEN 5x8x2.5mm Ball Bearing (2)
This is a set of two CEN 5x8x2.5mm Ball Bearings, intended for use with the CEN Ford F450 SD scale truck. This product was added to our catalog on March 4, 2021
$5.50
CEN Racing cegg73902, CEN 5x10x4mm Ball Bearing (2)
This is a replacement set of two CEN F450 5x10x4mm Ball Bearings, intended for use with the CEN Ford F450 SD scale truck. This product was added to our catalog on February 16, 2021
$5.50
CEN Racing CEGG73907, CEN 10x15x4mm Ball Bearing (2)
CEGG73907, CEN 10x15x4mm Ball Bearing (2) This is a replacement set of two CEN 10x15x4mm Ball Bearings, intended for use with the CEN Ford F450 SD scale truck. This product was added to our catalog on February 16, 2021
$6.50
CEN Racing CEGGS001, CEN Differential Case (2)
This is a replacement CEN Racing Aluminum Differential Case Set, and is intended for use with the CEN Racing GST 7.7 and GST-E monster trucks. Package includes two differential cases and hardware. This product was added to our catalog on September 23, 2020
$15.99
CEN Racing CEGGS248, CEN Upper Suspension Arm
CEN Upper Suspension Arm. Package includes replacement upper suspension arm for the CEN Reeper monster truck. COMPATIBILITY CEN Reeper
$4.99
CEN Racing CEGGS517, CEN Lower Suspension Arm
CEN Lower Suspension Arm. Package includes replacement suspension arm for the CEN Reeper and Colossus XT monster trucks. This suspension arm can be used in the front or rear position, on both the left and right side of the chassis. COMPATIBILITY CEN Reeper
$4.99
CEN Racing CEN Ford F450 SD KG1 Edition 1/10 RTR Custom Dually Truck w/2.4GHz Radio
CEN Ford F450 SD KG1 Edition 1/10 RTR Custom Dually Truck w/2.4GHz Radio The CEN Officially Licensed Ford F450 SD KG1 Edition 1/10 RTR Custom Truck is an exciting, unique True Scale contender to the scale truck scene. This dually truck was developed to create the look of a custom lifted truck, with the features needed to keep you rollin' for the long haul. The KG1 Edition includes officially licensed KG1 Trident D wheels, and is available in either a silver mercury with black wheels, or candy apple red with gold wheels to create the ultimate cruiser. This truck was made dust and water proof to protect the components on any track or trail. Over heat protection and throttle signal loss prevention give you the feedback needed to not over-do a good time or lose control of your truck. A Pistol-Grip AMP 30 3 Channel Transmitter is included in this Ready to Run, featuring digital trim and a built in fail-safe to help you stay in control. CEN paid attention to the details with the components as well, with hardened steel components, super scale features and a full selection of option parts designed to allow easy customization. Features: SC-40A WP-1040-Brushed (Powered by HobbyWing): Water-proof and dust-proof for all weather Built-In Capacitor Module Automatic throttle range calibration Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery Over-Heat protection and throttle signal loss protection Easily programmed with jumpers Motor-RS-550 high Torque Motor (Power By Mabuchi Motor) Servo -12Kg Servo O.E.M. by Savox: 4.8V 0.26 sec/60deg 10.0 kg-cm 6.0V 0.23 sec/60deg 12.0 kg-cm 25T Horn Gear Spline Radio System: Pistol-Grip AMP 30 3 Channel Transmitter Digital Trimming Steering Dual-Rate (ST D/R) Adjustment End Point Adjustment (EPA) Built in Fail-safe Chassis: Steel Frame Rails CMS (Chassis Mounted Servo) Chassis Design Stamped Steel Shock Hoops Steel Skid Plate Full Precision Ball Bearing Support Adjustable Turnbuckles High Torque Servo Horn Safer Suspension: 3 Links Suspension with Panhard Bar Design Big Bore Oil Filled Adjustable Coil Over Shocks Harden Steel Steering Drag Link Sway bar included 6mm Aluminum Linkage Drivetrain: 4 Wheel Drive Center Shaft Drive Train for more power transferred to the wheels Highly Efficient Transmission System Wide Range Easy Changeable Gear Box Design Sealed transmission eliminates dirt and dust Sealed Axle housing 5mm Hardened Steel Axle shaft Differential Center Locker Front/Rear Planetary Gear Type Metal Transmission Gears Planetary Gear type Differential Specifications: Length: 26.70inch (678.18mm) Width: 11.41inch (290mm) Wheelbase: 17.60inch (447mm) Ground Clearance: 2.52inch (64mm) Weight: 5.51 lb. (2.5kg) Battery: 2s Lipo recommended Includes: (1) Ford F450 SD KG1 Edition True 1/10 Scale RTR Custom Truck Needed to complete: 2S Lipo w/T-Style Connector Battery Charger (4) "AA" Batteries for Transmitter This product was added to our catalog on December 29, 2021
$419.99
CEN Racing CEN Racing Ford F450 1/10 4WD Solid Axle RTR Dually Truck
Ford F450 1/10 4WD Solid Axle RTR Dually Truck CEN Racing official Licensed FORD F450 SD 1/10 4WD RTR (Blue) Custom Truck DL-Series. True 1/10 scale RTR. Product Manual ESC-40A WP-1040-Brushed (Powered by HobbyWing):Water-proof and dust-proof for all weatherBuilt-In Capacitor ModuleAutomatic throttle range calibrationLow voltage cut-off protection for Li-Po (lithium polymer) and NiMH batteryOver-Heat protection and throttle signal loss protectionEasily programmed with jumpersMotor-RS-550 high Torque Motor - Power By Mabuchi MotorServo -12Kg Servo O.E.M. by Savox:4.8V 0.26 sec/60deg 10.0 kg-cm6.0V 0.23 sec/60deg 12.0 kg-cm25T Horn Gear Spline Radio System:Pistol-Grip AMP 30 3 Channel TransmitterDigital TrimmingSteering Dual-Rate (ST D/R) AdjustmentEnd Point Adjustment (EPA)Built in Failsafe Chassis:- Steel Frame Rails- CMS (Chassis Mounted Servo) Chassis Design- Stamped Steel Shock Hoops- Steel Skid Plate- Full Precision Ball Bearing Support- Adjustable Turnbuckles- High Torque Servo Horn Safer Suspension:- 3 Links Suspension with Panhard Bar Design- Big Bore Oil Filled Adjustable Coil Over Shocks- Harden Steel Steering Drag Link- 6mm Aluminum Linkage Drivetrain:Sway bar included4 Wheel DriveCenter Shaft Drive Train for more power transferred to the wheelsHighly Efficient Transmission SystemWide Range Easy Changeable Gear Box DesignSealed transmission eliminates dirt and dustSealed Axle housing5mm Hardened Steel Axle shaftDifferential Center Locker Front/Rear Planetary Gear TypeMetal Transmission GearsPlanetary Gear type Differential Specifications: Length: 26.70inch (678.18mm) Width: 11.41inch (290mm) Wheelbase: 17.60inch (447mm) Ground Clearance: 2.52inch (64mm) Weight: 2.51 lb. 2.5kg
$419.99
CEN Racing Ford F450 American Force Wheel and Fury Tire 1/10 4WD RTR Custom Truck DL- Series
Ford F450 American Force Wheel and Fury Tire 1/10 4WD RTR Custom Truck DL- Series The CEN Ford F450 SD V2 1/10 RTR Custom Dually Truck features custom updates to this already unique scale truck. When first released the CEN Ford F450 quickly became a cult classic, sparking scale inspired builds and custom options. The V2 takes the same features that created this icon and adds a custom touch. The most noticeable are the updated body colors; Blue Galaxy(CEG8984) and Grey Titanium(CEG8985). Adding to this look are the chrome wheels and links offered with the Blue Galaxy model and the Gold wheels and links offered on the Grey Titanium model. This creates a custom look further setting the CEN Ford F450 apart from the competition. With a stout and durable drivetrain the CEN F450 offers the same proven performance you would expect from a heavy duty truck. Using scale steel frame rails as a base for the 3 link suspension this truck features 4wd drivetrain offering an abundance of traction with the rear axle having four tires digging for grip. Powering this drivetrain is a large 550 size brushed motor and Hobbywing 40A WP-1040 ESC. Steering is handled by a high torque Savox servo and an AMP 30 3-Channel transmitter providing precise steering and throttle control. Packed full of features out of the box and topped off with custom looks that no other truck offers it is easy to see why the CEN Ford F450 is so popular! Features: SC-40A WP-1040-Brushed (Powered by HobbyWing): Water-proof and dust-proof for all weather Built-In Capacitor Module Automatic throttle range calibration Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery Over-Heat protection and throttle signal loss protection Easily programmed with jumpers Motor-RS-550 high Torque Motor (Power By Mabuchi Motor) Servo -12Kg Servo O.E.M. by Savox: 4.8V 0.26 sec/60deg 10.0 kg-cm 6.0V 0.23 sec/60deg 12.0 kg-cm 25T Horn Gear Spline Radio System: Pistol-Grip AMP 30 3 Channel Transmitter Digital Trimming Steering Dual-Rate (ST D/R) Adjustment End Point Adjustment (EPA) Built in Fail-safe Chassis: Steel Frame Rails CMS (Chassis Mounted Servo) Chassis Design Stamped Steel Shock Hoops Steel Skid Plate Full Precision Ball Bearing Support Adjustable Turnbuckles High Torque Servo Horn Safer Suspension: 3 Links Suspension with Panhard Bar Design Big Bore Oil Filled Adjustable Coil Over Shocks Harden Steel Steering Drag Link Sway bar included 6mm Aluminum Linkage Drivetrain: 4 Wheel Drive Center Shaft Drive Train for more power transferred to the wheels Highly Efficient Transmission System Wide Range Easy Changeable Gear Box Design Sealed transmission eliminates dirt and dust Sealed Axle housing 5mm Hardened Steel Axle shaft Differential Center Locker Front/Rear Planetary Gear Type Metal Transmission Gears Planetary Gear type Differential Specifications: Length: 26.70inch (678.18mm) Width: 11.41inch (290mm) Wheelbase: 17.60inch (447mm) Ground Clearance: 2.52inch (64mm) Weight: 5.51 lb. (2.5kg) Battery: 2s Lipo recommended Includes: (1) Ford F450 SD V2 1/10 RTR Custom Dually Truck Needed to complete: 2S Lipo w/T-Style Connector Battery Charger (4) "AA" Batteries for Transmitter This product was added to our catalog on August 1, 2022
$419.99
StupidRC Parts STP1901, STUPID RC CEN F-450 SIDE STEPS
STP1901, STUPID RC CEN F-450 SIDE STEPS Aluminum Side Steps for CEN RACING F450 This item was added to our catalog February 29, 2024
$34.00
StupidRC Parts STP1902, CEN Racing F450 Front Bumper with Winch Support for F450 Cen Racing
Aluminum Front Bumper with Winch Support Designed for the Cen Racing F450 *Winch not included Features:- Robust aluminum construction- Winch support This item was added to our catalog January 2, 2024
$50.00
StupidRC Parts STP1904, Cen Racing F450 17mm Wheel Hex Extension Hubs
Cen Racing F450 Wheel Hex Extension Hubs - StupidRC This kit was designed so you can fit 17mm hex wheels onto your Cen Racing F450 SD RC *CAR AND WHEELS NOT INCLUDED Features: - 40mm extension - All Aluminum parts - Integrated brake discs Includes: - Aluminum Wheel Hex Extension hubs (x4) - All necessary parts and hardware (screws and nuts) SHIPPING & HANDLING POLICIES a) Import duties, taxes and charges are not included in the price or shipping. These charges are buyer€™s responsibility. b) Please check with your country€™s customs office to determine what these additional costs will be prior to bidding/buying.
$69.90
You have seen 86 out of 86 products