TRA6856X, Traxxas Aluminum 17mm Wheel Adapter Set (Blue) (4)
This is an optional Traxxas Aluminum 17mm Wheel Adapter Set, and is intended for use with the Traxxas Slash 4x4 truck. This kit includes all the components necessary to convert your truck to 17mm 1/8 scale off-road tires including hubs, hub retainers, wheel pins, splined 17mm wheel nuts and an allen wrench for installation.
This product was added to our catalog on September 7, 2021
TRA6730G, Traxxas Rustler/Slash 4x4 LCG Chassis Brace Kit (Green)
Chassis brace kit, green (fits Rustler® 4X4 or Slash 4X4 models equipped with Low-CG chassis)
This product was added to our catalog on May 7, 2021
TRA6845A, Traxxas Slash 4x4 Aluminum Drag Link (Blue)
Traxxas Rally
Traxxas Rustler 4x4
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 4x4
This is an optional Traxxas Aluminum Drag Link, intended for use with Traxxas Slash 4x4, Rustler 4x4 and Stampede 4x4 models. This machined aluminum part is stronger than the stock plastic parts, and is available in a variety of colors.
This product was added to our catalog on September 7, 2021
TRA6860A, Traxxas Motor Mount w/Hardware
This is a replacement Traxxas Motor Mount, and is intended for use with the Traxxas Slash 4x4, Hoss, Telluride 4x4, and the Stampede 4x4. Package includes one mount.
This product was added to our catalog on September 7, 2021
TRA6823, Traxxas Aluminum Bulkhead Front & Rear Tie Bar Set (Blue)
This is a replacement Traxxas Bulkhead Front & Rear Aluminum Tie Bar Set, and is intended for use with the Traxxas Slash 4x4 short course truck.
This product was added to our catalog on September 7, 2021
TKR6837, Tekno RC Nylon M6 Driveshaft Steering Block Set (2)
Front steering blocks for the Tekno RC M6 Driveshafts for Slash and Slash 4×4. Molded nylon composite for incredible strength and light weight. Added bump steer holes for better fine tuning the handling of your vehicle. Increased outer bearing size for increased durability.
Note: These are meant to be used with the Tekno RC M6 (6mm) Driveshafts and stub axles. These are not a direct stock replacement unless you are using the M6 Driveshafts.
This product was added to our catalog on December 16, 2021
RPM70652, RPM Slash LCG 4x4 & Rally Nerf Bar Set (Black)
This is an optional RPM Slash LCG 4x4 & Rally Nerf Bar Set. The chassis layouts of the 1/10th scale Rally LCG & Slash 4x4 LCG changed the original design of the stock nerf bars, making the RPM80622 & RPM80625 nerf bars unusable. These LCG nerf bars fix that problem and are a direct, perfect fit!
RPM LCG Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to Black Nerf Bars for the 1/10th Rally, LCG Slash 2wd & LCG Slash 4x4. The additional cross bracing optimizes the rigidity while absorbing additional impact energy anything less than RPM would have crumpled under!
RPM Nerf Bars are stock replacement parts and work with all stock Traxxas chassis nerf bars TRA7423. RPM Nerf Bars are proudly made in the USA, molded in either blue or black from our engineering grade nylons and backed by our limited lifetime warranty against breakage.
Features:
Available in Black and Blue
This product was added to our catalog on July 31, 2021
Yeah Racing 3mm Aluminum Threaded Rod Ends. These standard threaded rod ends are great for 3mm turnbuckles. Best results if paired with the Yeah Racing reverse thread rod ends (YEA-YA-0572DB). Package includes five aluminum rod ends.NOTE: These are standard threaded (clockwise). Please be sure of thread direction prior to purchase.Features:
Made from machined aluminum for a strong finish
Available in multiple colors to best match your build
This product was added to our catalog on December 16, 2021
RCE1849RD, Slash 2/4WD Aluminum Front Shock (pr) - Red
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment. Replaces the kit plastic shocks (TRA3760).*Firm Springs Included
Specifications:
Spring Length: 57mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
TRA6787X, 4X4 Stainless Hardware Kit
Give your Traxxas model a complete upgrade with this stainless steel hardware kit. The hardware kit replaces the standard hardware on your vehicle with stainless steel hardware for long-lasting performance in wet conditions. Hex-drive heads deliver a positive and secure connection for easy installation and removal. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. Not all hardware compatible with BL-2s models
This product was added to our catalog on October 4, 2023
TRA6787, Traxxas Hardware Kit 4X4 Hoss/Slash/Stampede/Rustler
Give your Traxxas model a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware. Individual compartments keep everything organized with a handy label to measure and identify the parts. Not all hardware compatible with BL-2s models.
This product was added to our catalog on October 4, 2023
HRASLF117X06, Hot Racing Traxxas Slash 4x4 Light Weight Splined 17mm Hubs
Hot Racing Traxxas Slash 4x4 Light Weight Splined 17mm Hubs. These optional 17mm hex hub wheel adapters fit the Traxxas Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +6mm/side.
Features:
Black anodized CNC machined aluminum hex adapter
Blue anodized CNC machined 17mm wheel net with integrated o-ring to prevent nut from backing off
Mates to Traxxas stub axle using 2mm axle pin and M4 wheel nut
Replaces Traxxas 1654 12mm wheel hex
Specifications:
Offset from stock wheel hex: +6mm/side
Total length: 21.5mm
Hex: 17mm
Includes:
(4) 17mm hex hubs
(4) 17mm hex wheel nuts
(4) M4 wheel barrel nuts
(4) 2x9.7mm axle pins
(1) 4mm hex wrench
NOTE:
Use a removable thread lock on axle barrel nuts
Replacement M4 Wheel Barrel Nut Fastener is Hot Racing HRARSSLF117X
This product was added to our catalog on March 30, 2022
TRA5848, Traxxas Slash 4X4 Pre-Painted Body (Rock N' Roll)
Traxxas Slash 4X4 Pre-Painted Body. Package includes factory painted and trimmed body with decals applied.
This product was added to our catalog on April 12, 2021
Revolution Design Traxxas Slash 4X4 Ultra Bearing Set. This optional bearing set is intended for the Traxxas Slash 4X4. Precision made, these bearings are designed to perform at their best no matter the conditions. Package includes one complete bearing set.
TRA9837, Bumper mount (front (1)/ rear (1)) (fits #9834 bumpers)
Bumper mount (front (1)/ rear (1)) (fits #9834 bumpers)Replacement front and rear bumper mounts for 9812-series TRX-4M™ F-150® bodies
This product was added to our catalog on September 7, 2021
TRA6876, Traxxas BFGoodrich KM2 Tire w/SCT Rear Wheel (2) (Chrome/Green) (Standard)
Traxxas Nitro Slash
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Telluride 4x4
This is a set of two Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires, Pre-Mounted on SCT Chrome Wheels. These are intended for use on the front and rear of the Traxxas Slash 4x4 and the rear of the Traxxas Slash 2wd line of trucks. These are the fully licensed BFGoodrich Mud-Terrain T/A tires, and have been proven performers in TORC series competition. The distinctive tread design has been faithfully re-created in high grip rubber.
The design of the SCT wheel features a chrome center and color molded beadlock detail for a realistic look. Fully compatible with factory Traxxas and aftermarket 2.2/3.0 tires, the wheels feature 12mm hexes and the same offset as Slash 2wd rear wheels.
This product was added to our catalog on September 7, 2021
TRA6895, Traxxas Front Sway Bar Linkage (2)
Traxxas Rally
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 4x4
Traxxas Telluride 4x4
This product was added to our catalog on September 7, 2021
TRA9080, Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty Suspension Upgrade Kit (Black)
Traxxas Hoss
Traxxas Rustler 4x4
Traxxas Slash 4x4
The Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty Suspension Upgrade Kit has been designed to turn your ride into the ultimate bashing machine. This optional suspension upgrade kit is intended for the Traxxas Hoss 4x4, Rustler 4x4 and Slash 4x4. The kit uses fully updated suspension components, as well as Maxx Duty driveshafts with 6mm stub axles and steel wheel hexes.
NOTE: May not work with sway bars or other accessories.
Features:
Designed for the Traxxas Hoss 4x4, Rustler 4x4 and Slash 4x4 models
Adds extreme durability to your ride
Fully updated suspension components, drivelines and hexes
Available in multiple color options to best match your build
This item was added to our catalog February 21, 2024
HRASSLF254X, Hot Racing Traxxas Slash Super Duty Slipper Spur Gear (54T)
The Hot Racing Traxxas Slash Super Duty Slipper Spur Gear is an excellent way to add durability and performance to the Slash 4x4. Using a steel 32P spur gear and upgraded slipper unit this kit can handle some of the most high performance power systems.
NOTE: Replaces Traxxas stock slipper unit.
Features:
Hardened steel gear and slipper wear surface increase durability and add long life
Cross-drilled and vented gear to reduce rotational mass and help dissipate heat
Aluminum slipper back plate, cross-drilled for reduced rotating mass and heat dissipation
Metallic slipper pad provides an excellent balance of friction and wear resistance
Ball bearing hub for reduced friction
Designed to handle Traxxas VXL brushless power
Specifications:
Gear: 54T, 32P (mod 0.8)
Outer Diameter: 44.5mm
Inner Diameter: 5mm
Weight 47g
Included:
(1) 54T Spur Gear
(1) Aluminum Back Plate
(1) Slipper Pad
(1) 7x13x4mm Ball Bearing
(1) Aluminum Bushing
This product was added to our catalog on November 2, 2023
RPM70392, Front Shock Tower, Black: SLH 4x4, ST 4x4
Traxxas Rally
Traxxas Slash 4x4
Traxxas Stampede 4x4
This product was added to our catalog on December 16, 2021
HRATE48X01, Hot Racing Traxxas Slash Aluminum Steering Bellcrank w/Servo Saver
Hot Racing Traxxas Slash Aluminum Steering Bellcrank with Servo Saver. This optional steering bell crank is intended for the Traxxas Slash, Stampede, Rustler or Bandit. Package includes one steering bellcrank.Features:
Fully adjustable servo saver
Made with CNC-machined 6061 aluminum
Adjustable servo saver springs for different tension
Full ball bearing operation for ultra smooth steering
This product was added to our catalog on December 16, 2021
HRASLF10X08, Hot Racing Traxxas Slash 4x4 Aluminum 12mm Hex Wheel Extensions (Silver) (28mm)
Hot Racing Traxxas Slash 4x4 Aluminum 12mm Hex Wheel Extensions add 28mm of width to the Traxxas Slash 4X4, Stampede 4X4, and Rally vehicles with 5mm diameter outer stub axles.Features:
Extends the width of your buggy or truck for a wider stance and greater control
Fits over axles and secures in place with included pins and setscrews
Specifications:Length: (28mm) from the back of the hub to the front of the hex portionHex size: 12mmAxle diameter: 5mmCross pin diameter: 2mm
This product was added to our catalog on December 16, 2021
HRASLF311E, Hot Racing Front/Rear Sway Bar Kit
These are the optional Hot-Racing Front and Rear Sway Bar Kit for the 1/10 scale Traxxas 4x4 Slash, Slash LCG and Rally Vehicles. jxs 06/23/15 ir/jxs
Traxxas Rally
Traxxas Slash 4x4
This product was added to our catalog on December 16, 2021
TRA6844, Traxxas Slash 4X4 Pre-Painted Body (Orange & Blue)
Traxxas Slash 4X4 Pre-Painted Body. This is a replacement body intended for the Slash 4x4 and comes in a pre-painted orange and blue paint scheme. Package includes one body.
This product was added to our catalog on September 7, 2021
TRA6841, Traxxas Center Driveshaft Cover (Clear)
This is a set of replacement Traxxas Center Driveshaft Cover, and are intended for use with the Traxxas Slash 4x4 short course truck.
This product was added to our catalog on September 7, 2021
TRA6786, 4X4 Bearing Kit
Restore your Traxxas model to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replacements. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. Not all bearings compatible with BL-2s models
This product was added to our catalog on October 4, 2023
TRA6786X, 4X4 Stainless Bearing Kit
Boost performance and reduce maintenance with this stainless steel bearing kit. The bearing kit replaces the standard bearings with high quality stainless steel bearings for long-lasting performance in wet conditions. High quality black seals offer ultimate protection from the elements with less maintenance in dirty environments. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. Not all bearings compatible with BL-2s models
This product was added to our catalog on October 4, 2023
EXO2131, Exotek Slash 4X4 HD Steel Front CVD Set
Exotek Slash 4X4 HD Steel Front CVD Set. Designed to be an optional upgrade for the Traxxas Slash 4X4, Rally and Stampede 4X4 this CVD set is an excellent way to add durability to your vehicle. Constructed from high quality steel insures that this set will be reliable over the long run even with high power brushless systems. The updated differential cups use two set screws each to give ultra secure and reliable mounting.NOTE: Requires blue thread lock and cvd oil or grease (not included).Includes:
(2) 72mm CVD Axle Assemblies
(2) Differential Outdrives
(6) Set Screws
This product was added to our catalog on January 19, 2022
EXO2132, Exotek Slash 4X4/2WD HD Steel Rear CVD Set
Exotek Slash 4X4/2WD HD Steel Rear CVD Set. Designed to be an optional upgrade for the Traxxas Slash 4X4, Slash 2WD, Rally and Stampede 4X4 this CVD set is an excellent way to add durability to your vehicle. Constructed from high quality steel insures that this set will be reliable over the long run even with high power brushless systems. The updated differential cups use two set screws each to give ultra secure and reliable mounting.
NOTE: Requires blue thread lock and cvd oil or grease (not included).
Includes:
(2) 76mm CVD Axle Assemblies
(2) Differential Outdrives
(6) Set Screws
This product was added to our catalog on May 19, 2021
HRASLF4801, Hot Racing Traxxas Slash 4x4 Adjustable Steering Bellcrank & Servo Saver
The Hot Racing Traxxas Slash 4x4 Adjustable Steering Bellcrank & Servo Saver is an optional upgrade for the 1/10 Traxxas Rally 4X4, Slash 4X4, and Stampede 4X4.
Features:
CNC machined aluminum construction
Adjustable spring loaded steering arm protects servo gears during impact
NOTE:
Reuses stock steering bellcrank bearing
Recommended to use a removable thead-locking adhesive on screws threading into metal
Using a high pressure grease on the servo saver cam surfaces can smooth the servo saver action
This product was added to our catalog on December 16, 2021
