Traxxas Aluminum Center Driveshaft
his is a replacement Traxxas Aluminum Center Driveshaft, and is intended for use with the Traxxas Slash 4x4 short course truck.
This product was added to our catalog on September 7, 2021
TRA6852R, Traxxas Rear Heavy Duty Steel CV Driveshaft (2)
This is an optional Traxxas Rear Steel Constant-Velocity Driveshaft Set, and is intended for use with the Traxxas Slash 4X4 and Slash 2wd 1/10 scale short course trucks, as well as the Traxxas Rally. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and blue silicone boots add a custom look.
This product was added to our catalog on September 7, 2021
YEA-TRSL-015FBU, Yeah Racing Traxxas Slash/Stampede 4x4 HD Steel Front Drive Shafts (Blue)
The Yeah Racing Traxxas Slash/Stampede 4x4 HD Steel Front Drive Shafts are a great option for adding strength and style to your ride. The axle section and shaft are made from tool grade steel and the outer sleeve is made from aluminum to keep the weight low. These features allow for a great balance between weight and strength. Package includes two assembled drive shafts intended for the Traxxas Slash 4x4 or Stampede 4x4.Features:
Perfect fit for the Traxxas Slash or Stampede
Steel and aluminum construction
Center section is anodized aluminum to help keep weight down
This product was added to our catalog on December 16, 2021
HRASJT254, Hot Racing Traxxas 32P Steel Spur Gear (Silver) (54T)
This is the Hot Racing Steel 32 Pitch, 54 Tooth Spur Gear with Silver hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4.
Features:
CNC machined and lightened hardened steel construction
Black oxide coating for durability and corrosion resistance
Silver-colored countersunk washers
Specifications:
Number of Teeth: 54
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: 6mm (0.24 inch)
Internal diameter: ~11mm (~0.43 inch)
Includes:
54 tooth 32 pitch spur gear
(3) mounting screws
(3) silver-colored countersunk washers
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
Requires:
Hardened clutch bell or pinon gear
Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
This product was added to our catalog on May 16, 2021
TRA6851R, Traxxas Slash 4x4 and Stampede 4x4 Front Heavy Duty Steel CV Driveshaft (2)
This is an optional Traxxas Front Steel Constant-Velocity Driveshaft Set, and is intended for use with the Traxxas Slash 4x4 and Stampede 4x4 1/10 scale trucks. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin.
Traxxas Hoss
Traxxas Rustler 4x4
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 4x4
This product was added to our catalog on May 7, 2021
TRA5827X, Traxxas Battery Expansion Hold Down Retainer Kit
This is an optional Traxxas Battery Hold Down Retainer. This extended battery strap for the Slash and Slash 4x4 allows the use of LiPo packs up to 42mm tall in the stock battery tray. Package includes the battery strap, battery strap retainer, battery post, foam spacer and an angled body clip.
This product was added to our catalog on September 7, 2021
TRA5883, Traxxas BFGoodrich KM2 Tire w/Split-Spoke Rear Wheel (2) (Black) (Standard))
This is a set of two Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires, Pre-Mounted on Split-Spoke SCT Wheels. These are intended for use on the front and rear of the Traxxas Slash 4x4 and the rear of the Traxxas Slash 2wd line of trucks. These are fully licensed BFGoodrich Mud-Terrain T/A tires, and have been proven performers in TORC series competition. The distinctive tread design has been faithfully re-created, complete with white sidewall lettering.
Fits:
Traxxas Nitro Slash
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Telluride 4x4
The design of the Split-Spoke SCT wheel features a black center and color molded beadlock detail in either blue or chrome for a realistic look. Fully compatible with factory Traxxas and aftermarket 2.2/3.0 tires, the wheels feature 12mm hexes and the same offset as Slash 2wd rear wheels.
This product was added to our catalog on May 10, 2021
RCE1850BL, Slash 2/4WD Aluminum Rear Shock (pr) - Blue
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment.*Firm Springs Included
Specifications:
Spring Length: 66mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
TRA6837, Traxxas Left/Right Steering Block Set
Replacement part for these models:
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 VXL
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
Stampede® 4X4
Accessory part for these models:
Slash 4X4 Ultimate
This product was added to our catalog on September 7, 2021
TRA3739, Traxxas Screw Pin Set
This is a replacement suspension screw pin set from Traxxas. These suspension screw pins are used where the suspension arms pivot.
Fits:
Traxxas Bandit
Traxxas Hoss
Traxxas Nitro Slash
Traxxas Rally
Traxxas Rustler 2wd
Traxxas Rustler 4x4
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 2wd
This product was added to our catalog on April 12, 2021
TRA6842, Traxxas .8 Mod Spur Gear (50T) (Slash 4x4)
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.
Accessory part for these models:
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 Platinum
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
Stampede® 4X4
This product was added to our catalog on September 7, 2021
TRA6832, Traxxas Caster Block Set
This is a replacement Traxxas Caster Block Set, and is intended for use with the Traxxas Slash 4x4 short course truck.
This product was added to our catalog on September 7, 2021
TRA6845X, Traxxas Steering Bellcrank Set
This is a replacement Traxxas Steering Bellcrank Set. Package includes steering bellcranks, servo saver, servo saver spring, servo spring retainer, servo horn and hardware.
This product was added to our catalog on April 26, 2021
TRA6898, Traxxas Slash 4x4 Sway Bar Kit (Front/Rear)
This is an optional Traxxas Sway Bar Kit, and is intended for use with the Traxxas Slash 4x4 short course truck. This kit includes two front and two rear sway bars, as well as adjustable linkage and necessary hardware.
This product was added to our catalog on September 7, 2021
HRASLF288RCF, Hot Racing Traxxas Slash 4x4 Front Light Weight Metal CV Splined Drive Shaft
This is a set of Hot Racing Traxxas Slash 4x4 Light Weight Front Metal CV Splined Drive Shafts, an optional upgrade heavy duty splined star drive axle kit for the Traxxas electric Stampede 4X4, Slash 4x4, Rustler 4X4 models.
Features:
CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum construction
Replaces factory plastic drive axles
Hard Black Anodized Aluminum Slider
Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
Design eliminated CV pin setscrew
Hardened S2 Spring steel wheel shaft
#45 Steel is black finish S2 spring in Brown finish
Rubber dust boot to keep the Splined Drive for maximum protection against the elements
Replaces factory plastic Traxxas parts
Specifications:
Approximate overall collapsed length: 112mm
Includes:
(2) Front Cv Splined Drive Shaft spline CVD shaft assemblies
(2) M4x2.5x11mm screw shafts
This product was added to our catalog on December 16, 2021
Traxxas Slash 1/10 Pre-Cut Short Course Truck Body (Clear)
Traxxas® Slash® 1/10 Pre-Cut Short Course Truck Body. This is a replacement body intended for use on the Traxxas Slash 1/10 2WD Short Course Truck. Alternatively, it will also fit the Traxxas Slash 1/10 Ultimate, 4x4, and 4x4 VXL platforms. This body is clear and unpainted, allowing you to add your own custom paint scheme to your truck. It is pre-trimmed with body holes already drilled for a seamless fit with the clipless mounting system (sold separately*).
Note:
*This body has pre-drilled holes specifically designed for the Traxxas Clipless Body Mounts (TRA6967) and the Traxxas Slash Clipless Body Latch Mount Retainers Set (TRA6966) sold separately.
Painted body shown in the photos is for illustrative purposes only. The product you will receive is clear and unpainted.
Features:
Pre-cut for a precise fit
Made from durable, high-quality polycarbonate material
Unpainted finish allows you to customize the paint job
Includes an overspray film to protect the body during painting
Pre-cut window masks ensure clean and clear windows
Add finishing touches and enhance the visual appeal with included decals
Engineered specifically for the Traxxas Slash 1/10 scale chassis
Pre-drilled body holes ready for the clipless mounting system available separately
Specifications:
Scale: 1/10
Length: 21.13in (536.58mm)
Wheelbase: 13.2in (335mm)
Width: 11.75in (298.45mm)
Height: 5.75in (146.05mm)
Application: Short Course Truck
Includes:
(1) Traxxas Slash 1/10 Pre-Cut Short Course Truck Body
(1) Window Masking Sheet
(1) Decal Sheet
This product was added to our catalog on July 22, 2024
TRA6788, Traxxas Slash 4x4 Pro-Built Front Differential
The Traxxas Slash 4x4 Pro-Built Front Differential is a pre-built replacement for Slash 4x4 Short Course trucks. Traxxas Pro-Built parts allow you to get your rig back in action faster and with less effort. These components allow you to replace parts as a complete unit, no assembly required.
This product was added to our catalog on September 7, 2021
TRA6837X, Traxxas Aluminum Steering Block Set (Blue) (2)
The Traxxas Aluminum Steering Block Set is CNC Machined from 6061 Aluminum, and will increase the durability of the front end of the Slash 4x4, Rustler 4x4, Stampede 4x4, and others. For the ultimate in front end durability, pair with the Traxxas Aluminum Caster Block Set (TRA6832A).
This product was added to our catalog on May 7, 2021
HRASLF311, Hot Racing Traxxas Slash 4x4 Front & Rear Sway Bar
Hot Racing Traxxas Slash 4x4 Front & Rear Sway Bar. This is an optional front and rear sway bar set for the Traxxas Slash 4x4, Slash 4x4 LCG, and 1/10 Rally vehicles.
NOTE: Requires Traxxas TRA3932 for mounting the wire
Features:Adjustable spring steel sway bar wireA set of three sway bars for a wider range of adjustment to suit the current track conditionChrome 2mm (hard) (stock black)Blue 1.8mm (med) (stock silver)Red 1.6mm (soft)Includes:(2) soft red anti-roll bars(2) medium blue anti-roll bars(2) hard chrome anti-roll bars(4) push rods with ball end
This product was added to our catalog on December 16, 2021
HRASSLF254D, Hot Racing Steel Center Diff Spur Gear 32P 54T 0.8m
This is the Hot Racing 54 Tooth Center Diff Spur Gear for the 1/10 scale Traxxas Slash 4x4, or Stampede with Center Diff.
Traxxas Slash 4x4
Traxxas TRX-4
This product was added to our catalog on December 16, 2021
TRA6835X, Traxxas Slash 4X4 Front Bumper (LED Compatible)
Traxxas Slash Front Bumper. This replacement front bumper is intended for the Traxxas Slash platforms.
Package includes one front bumper with a bumper mount.
This product was added to our catalog on February 9, 2022
TRA9069, Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty 12mm Wheel Hexes (4)
Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty 12mm Wheel Hexes. These wheel hexes are intended for the Traxxas Hoss 4x4, Rustler 4x4 or Slash 4x4 when equipped with the optional Traxxas Heavy Duty Upgrade Kit (TRA9080). Package includes four wheel hexes and four pins.
NOTE: These hexes are designed to be used with the TRA9080 upgrade kit only. They will not fit the factory suspension parts found on your model.
This product was added to our catalog on September 7, 2023
TRA6832X, Traxxas Aluminum Caster Block Set (Blue) (2)
Traxxas Aluminum Caster Blocks are CNC Machined from 6061 Aluminum, and will increase the durability of the front end of the Slash 4x4, Rustler 4x4, Stampede 4x4, XO-1 and others. For the ultimate in front end durability, pair with the Traxxas Aluminum Steering Block Set (TRA6837X).
This product was added to our catalog on May 7, 2021
RCE1850R, Slash 2/4WD Aluminum Rear Shock (pr) - Red
Slash 2/4WD Aluminum Rear Shock (pr) - Red
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment.
Specifications:
Spring Length: 66mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
TFE2190, FastEddy Traxxas Slash 4X4 RTR TQi Bearing Kit
Team FastEddy Traxxas Slash 4X4 RTR TQi Bearing Kit. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(6) 5x11x4
(5) 10X15x4
(4) 6X12x4
(4) 5X8x2.5
(2) 12X18x4
(2) 8X16x5
(2) 5X10x4
This product was added to our catalog on December 16, 2021
TRA6928, Traxxas Slash 4X4 Body Conversion Kit w/Body Mounts
raxxas Body Conv Kit Slash 4X4 F/R Body Mounts
This product was added to our catalog on September 7, 2023
TRA6888, Traxxas Rear Center Drive Hub
This is a replacement Traxxas Center/Rear Drive Hub, and is intended for use with the Traxxas Slash 4x4 short course truck. This set includes one center rear hub, as well as one screw pin.
This product was added to our catalog on September 7, 2021
TRA6836X, Traxxas 4WD Slash Rear Bumper Set w/Mount
Traxxas 4WD Slash Rear Bumper Set with Mount. This replacement rear bumper is intended for the LED equipped Traxxas Slash 4WD. Package includes one bumper mount set.
This product was added to our catalog on August 12, 2021
TRA6856X, Traxxas Aluminum 17mm Wheel Adapter Set (Blue) (4)
This is an optional Traxxas Aluminum 17mm Wheel Adapter Set, and is intended for use with the Traxxas Slash 4x4 truck. This kit includes all the components necessary to convert your truck to 17mm 1/8 scale off-road tires including hubs, hub retainers, wheel pins, splined 17mm wheel nuts and an allen wrench for installation.
This product was added to our catalog on September 7, 2021
TRA6845A, Traxxas Slash 4x4 Aluminum Drag Link (Blue)
Traxxas Rally
Traxxas Rustler 4x4
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 4x4
This is an optional Traxxas Aluminum Drag Link, intended for use with Traxxas Slash 4x4, Rustler 4x4 and Stampede 4x4 models. This machined aluminum part is stronger than the stock plastic parts, and is available in a variety of colors.
This product was added to our catalog on September 7, 2021
TRA6860A, Traxxas Motor Mount w/Hardware
This is a replacement Traxxas Motor Mount, and is intended for use with the Traxxas Slash 4x4, Hoss, Telluride 4x4, and the Stampede 4x4. Package includes one mount.
This product was added to our catalog on September 7, 2021
TRA6823, Traxxas Aluminum Bulkhead Front & Rear Tie Bar Set (Blue)
This is a replacement Traxxas Bulkhead Front & Rear Aluminum Tie Bar Set, and is intended for use with the Traxxas Slash 4x4 short course truck.
This product was added to our catalog on September 7, 2021
TKR6837, Tekno RC Nylon M6 Driveshaft Steering Block Set (2)
Front steering blocks for the Tekno RC M6 Driveshafts for Slash and Slash 4×4. Molded nylon composite for incredible strength and light weight. Added bump steer holes for better fine tuning the handling of your vehicle. Increased outer bearing size for increased durability.
Note: These are meant to be used with the Tekno RC M6 (6mm) Driveshafts and stub axles. These are not a direct stock replacement unless you are using the M6 Driveshafts.
This product was added to our catalog on December 16, 2021
RPM70652, RPM Slash LCG 4x4 & Rally Nerf Bar Set (Black)
This is an optional RPM Slash LCG 4x4 & Rally Nerf Bar Set. The chassis layouts of the 1/10th scale Rally LCG & Slash 4x4 LCG changed the original design of the stock nerf bars, making the RPM80622 & RPM80625 nerf bars unusable. These LCG nerf bars fix that problem and are a direct, perfect fit!
RPM LCG Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to Black Nerf Bars for the 1/10th Rally, LCG Slash 2wd & LCG Slash 4x4. The additional cross bracing optimizes the rigidity while absorbing additional impact energy anything less than RPM would have crumpled under!
RPM Nerf Bars are stock replacement parts and work with all stock Traxxas chassis nerf bars TRA7423. RPM Nerf Bars are proudly made in the USA, molded in either blue or black from our engineering grade nylons and backed by our limited lifetime warranty against breakage.
Features:
Available in Black and Blue
This product was added to our catalog on July 31, 2021
Yeah Racing 3mm Aluminum Threaded Rod Ends. These standard threaded rod ends are great for 3mm turnbuckles. Best results if paired with the Yeah Racing reverse thread rod ends (YEA-YA-0572DB). Package includes five aluminum rod ends.NOTE: These are standard threaded (clockwise). Please be sure of thread direction prior to purchase.Features:
Made from machined aluminum for a strong finish
Available in multiple colors to best match your build
This product was added to our catalog on December 16, 2021
HRASLF117X06, Hot Racing Traxxas Slash 4x4 Light Weight Splined 17mm Hubs
Hot Racing Traxxas Slash 4x4 Light Weight Splined 17mm Hubs. These optional 17mm hex hub wheel adapters fit the Traxxas Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +6mm/side.
Features:
Black anodized CNC machined aluminum hex adapter
Blue anodized CNC machined 17mm wheel net with integrated o-ring to prevent nut from backing off
Mates to Traxxas stub axle using 2mm axle pin and M4 wheel nut
Replaces Traxxas 1654 12mm wheel hex
Specifications:
Offset from stock wheel hex: +6mm/side
Total length: 21.5mm
Hex: 17mm
Includes:
(4) 17mm hex hubs
(4) 17mm hex wheel nuts
(4) M4 wheel barrel nuts
(4) 2x9.7mm axle pins
(1) 4mm hex wrench
NOTE:
Use a removable thread lock on axle barrel nuts
Replacement M4 Wheel Barrel Nut Fastener is Hot Racing HRARSSLF117X
This product was added to our catalog on March 30, 2022
TRA9837, Bumper mount (front (1)/ rear (1)) (fits #9834 bumpers)
Bumper mount (front (1)/ rear (1)) (fits #9834 bumpers)Replacement front and rear bumper mounts for 9812-series TRX-4M™ F-150® bodies
This product was added to our catalog on September 7, 2021
TRA6895, Traxxas Front Sway Bar Linkage (2)
Traxxas Rally
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 4x4
Traxxas Telluride 4x4
This product was added to our catalog on September 7, 2021
TRA9080, Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty Suspension Upgrade Kit (Black)
Traxxas Hoss
Traxxas Rustler 4x4
Traxxas Slash 4x4
The Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty Suspension Upgrade Kit has been designed to turn your ride into the ultimate bashing machine. This optional suspension upgrade kit is intended for the Traxxas Hoss 4x4, Rustler 4x4 and Slash 4x4. The kit uses fully updated suspension components, as well as Maxx Duty driveshafts with 6mm stub axles and steel wheel hexes.
NOTE: May not work with sway bars or other accessories.
Features:
Designed for the Traxxas Hoss 4x4, Rustler 4x4 and Slash 4x4 models
Adds extreme durability to your ride
Fully updated suspension components, drivelines and hexes
Available in multiple color options to best match your build
This item was added to our catalog February 21, 2024
RPM70392, Front Shock Tower, Black: SLH 4x4, ST 4x4
Traxxas Rally
Traxxas Slash 4x4
Traxxas Stampede 4x4
This product was added to our catalog on December 16, 2021
HRATE48X01, Hot Racing Traxxas Slash Aluminum Steering Bellcrank w/Servo Saver
Hot Racing Traxxas Slash Aluminum Steering Bellcrank with Servo Saver. This optional steering bell crank is intended for the Traxxas Slash, Stampede, Rustler or Bandit. Package includes one steering bellcrank.Features:
Fully adjustable servo saver
Made with CNC-machined 6061 aluminum
Adjustable servo saver springs for different tension
Full ball bearing operation for ultra smooth steering
This product was added to our catalog on December 16, 2021
