TRA8940X, Traxxas Maxx Hardened Steel Suspension Pin Set
Suspension pin set, complete (hardened steel), 4x64mm (4), 4x22mm (4), 4x38mm (4), 4x33mm (4), 4x47mm (4)/ 3x8mm BCS (14)/ 3x6mm BCS (4)/ retainers (8)This easy-to-install kit replaces the screw-in suspension pins on Maxx® with premium hardened-steel pins for maximum strength and durability. The pins are captured by button-head screws and retaining caps for secure installation and the low-friction finish delivers super-smooth suspension performance. The complete set includes sixteen inner and outer pins for the upper and lower arms, four steering block kingpins, all required hardware, and illustrated instructions. Also compatible with the 8995 WideMaxx® Kit.
This product was added to our catalog on September 7, 2021
TRA8919X, BATTERY EXPANSION KIT MAXX
Battery expansion kit (allows for installation of taller battery packs in Maxx® with standard chassis (329mm wheelbase))
This product was added to our catalog on September 7, 2021
TRA8919R, Traxxas Maxx Battery Hold-Down w/Mounts Set (352mm Wheelbase)
Battery hold-down/ mounts (front & rear)/ battery compartment spacers/ foam pads (fits Maxx® with extended chassis (352mm wheelbase))Battery hold down with front and rear mounts. Includes spacers and foam pads. Fits V2 (352 mm wheelbase) Maxx® chassis.
This product was added to our catalog on September 7, 2021
TRA8954, Traxxas Maxx Front Drive Hub w/3x10mm Screw Pin
This is a replacement Traxxas Maxx Front Drive Hub with a 3x10mm Screw Pin, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck.
This product was added to our catalog on September 7, 2021
TRA8992, Traxxas Maxx Complete Rear Differential Assembly
The Pro Built® rear differential comes completely assembled and ready to install in your Maxx®. Includes differential pinion gear and bearings.
This product was added to our catalog on June 5, 2021
TRA8950X, Traxxas Maxx Steel Constant-Velocity Driveshaft Set (4)
The Traxxas Maxx Steel Constant-Velocity Driveshaft Set is a heavy duty upgrade for your Traxxas Maxx. Package includes the parts needed to replace all four driveshafts, as well as bearings and hardware.
NOTE: TRA7758 wheel nuts and TRA8654 wheel hubs are required for completion.
This product was added to our catalog on May 7, 2021
HRAMXX288RC06, Hot Racing Traxxas Maxx Metal CV Splined Drive Shaft (Blue) (2)
The Hot Racing Traxxas Maxx Metal CV Splined Drive Shaft is an optional heavy duty splined star drive CVD axle kit that fits the front or rear of the Traxxas 1/10th scale Maxx monster truck.
NOTE:
Traxxas WIDE Maxx applications require optional 65mm center drive tube (HRASLD65T)
Must re-use the stock Drive pin and set screw Pin
Maintain CV joint and shaft spline with grease
Use medium thread lock on screws threading into metal
Features:
CNC machined #45 hardened carbon steel CVs, drive hub, male slider spline, and stub axle
CNC machined aluminum slider tube
Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
Rubber dust cover boots
Replaces factory front or rear driveshaft axles
Specifications:
Collapsed length (overall): 140mm
Extended length (overall resulting in zero shaft engagement): 156mm
Collapsed length (wheel pin to outdrive pin): 118mm
Extended length (wheel pin to outdrive pin resulting in zero shaft engagement): 132mm
Includes:
(2) splined axle assemblies
This product was added to our catalog on December 16, 2021
TRA2890X, Traxxas 4S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (14.8V/6700mAh)
The Traxxas 4S "Power Cell" 25C LiPo Battery delivers 6700mAh capacity and 50C burst discharge rate for power, performance, and runtime. Built using the same sturdy construction methods as the Traxxas 2-cell and 3-cell batteries, but checking in at over 30-volts in 8s configuration, Traxxas 4-cell LiPos will stand X-Maxx on its wheelie bar and have it catching massive air as fast as you can grab the throttle.
Features:
Traxxas High-Current Connectors
Integrated LiPo Balance Charging Wires
Semi-Rigid Construction for efficient packaging
Oversized Discharge Tabs for minimum resistance
Hard-wired 12-gauge Maxx Cable soldered to cells
Center Wire Exit for guaranteed proper fitment
(L) 185mm x (W) 50mm x (H) 44mm
675 Grams (average)
Accessory part for these models:
Traxxas Maxx
Traxxas Unlimited Desert Racer
Traxxas X-Maxx
Traxxas XRT
This product was added to our catalog on April 7, 2021
TRA6590, Traxxas High-Voltage Power Amplifier
This is a Traxxas High-Voltage Power Amplifier, intended for use as a replacement with the Unlimited Desert Racer and as an accessory part for the Maxx and X-Maxx kits. This will allow you to change lighting modes on the fly when using the Traxxas Link app.
This product was added to our catalog on March 20, 2020
HRAMXX125, Hot Racing Traxxas Maxx Differential Locker Spool
The Hot Racing Traxxas Maxx Differential Locker Spool is a tuning option that eliminates the differential, and creates a solid spool. This can be used in the front or rear and is recommended for off-road use only.
Features:
Black oxide coated CNC machined steel
Fits front or rear
Recommended for off-road use ONLY
Replaces Traxxas TRA8982 output gears and TRA8981 gears case
Includes:
(1) differential spool shaft
This product was added to our catalog on April 21, 2021
PHBPHMAXX01-Blue, Aluminum Wheelie Bar, Blue, fits Traxxas Maxx High-quality aluminum, durable and strong Increase overall performance and durability of your Maxx
This product was added to our catalog on October 14, 2021
HRAMXX10W01, Hot Racing Traxxas Maxx Aluminum +10mm 17mm Splined Hubs
Hot Racing Traxxas Maxx Aluminum +10mm 17mm Splined Hubs increase the track width of the vehicle to increase stability and replace the existing hexes so the vehicle can accept wheels with a 17mm hex.
NOTE: Not compatible with WideMaxx optional Steel CV Driveshafts TRA8996A
Features:
+10mm hub extensions (each side) increase stability over terrain
Black anodized CNC machined aluminum hub extensions
Blue anodized CNC machined 17mm wheel nuts
Rubber o-ringed wheel nuts help prevent wheel loosening
Closed ends on wheel nuts protect against dirt and debris build-up in the axle or hub
Hardened steel axle nuts fit inside hex hub to secure axle to hub. Axle nuts are tightened with included hex wrench.
Includes:
(4) 17mm hex hubs
(4) 2.5x15mm pins
(4) M5 barrel nuts
(1) 4mm hex wrench
This product was added to our catalog on December 16, 2021
TRA8991, Differential, front, complete (fits Maxx®)
The Pro Built® front differential comes completely assembled and ready to install in your Maxx®. Includes differential pinion gear and bearings.
This product was added to our catalog on June 5, 2021
TRA8948X, Traxxas Maxx Aluminum Front Toe Link
This is an optional set of Traxxas Maxx Aluminum Front Toe Links, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. These parts are anodized blue and machined from quality 7075-T6 aluminum to be stronger than titanium and stock parts.Includes:
(2) Rod ends, rear
(4) Rod ends, front
(1) Aluminum wrench
This product was added to our catalog on September 7, 2021
TRA8936X, Traxxas Maxx LED Light Rear Bumper
The Traxxas Maxx LED Light Rear Bumper is an optional upgrade for the Traxxas Maxx monster truck. This bumper allows the use of the Traxxas TRA8990 LED light kit (not included).
This product was added to our catalog on September 7, 2021
TRA8798X, Maxx Stainless Hardware Kit
Give your Traxxas Maxx a complete upgrade with this stainless steel hardware kit. The hardware kit replaces the standard hardware on your vehicle with stainless steel hardware for long-lasting performance in wet conditions. Hex-drive heads deliver a positive and secure connection for easy installation and removal. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts.
This product was added to our catalog on October 5, 2023
RA8798, Maxx Hardware Kit
Give your Traxxas Maxx a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware. Individual compartments keep everything organized with a handy label to measure and identify the parts.
This product was added to our catalog on October 5, 2023
TRA8799X, Maxx Stainless Bearing Kit
Boost performance and reduce maintenance with this stainless steel bearing kit. The bearing kit replaces the standard bearings with high quality stainless steel bearings for long-lasting performance in wet conditions. High quality black seals offer ultimate protection from the elements with less maintenance in dirty environments. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts.
This product was added to our catalog on October 5, 2023
TRA8799, Maxx Bearing Kit
Restore your Traxxas Maxx to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replacements. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts.
This product was added to our catalog on October 5, 2023
TRA8911G, Traxxas, BODY, MAXX®, GREEN W/ DECAL
Product Information:
TRA8911G, Traxxas, BODY, MAXX®, GREEN W/ DECAL
Traxxas Vehicles, Parts & Accessories
Traxxas
tra8911g
UPC: 020334891167
This product was added to our catalog or updated on April 4, 2022
Suspension kit, WideMaxx™, (includes front & rear suspension arms, front toe links, outer half shafts (extended), rear shock springs)
SUSPENSION KIT WIDEMAXX
This product was added to our catalog on December 15, 2021
