92056-4, Traxxas TRX-4 1/10 High Trail Edition RC Crawler w/'79 Chevrolet K10 Truck Body w/TQi 2.4GHz Radio The Traxxas TRX-4 1/10 Trail Crawler Truck with 1979 Chevrolet K10 Truck Body has been designed to offer scale performance and adventure. Thanks to its factory-installed Long Arm Lift Kit and oversize tires, the highly detailed K10 replica body stands over an inch taller than the standard TRX-4 chassis. The K10’s extended wheelbase further enhances the TRX-4’s legendary off-road capability for better performance on the trail. To further the appearance, this truck uses the Traxxas Clipless Body Mounting for added scale realism. The TRX-4 High Trail Edition is the perfect vehicle for the driver who wants it all: extreme all-terrain capability, stunning scale looks, and extreme durability. This High Trail Edition TRX-4 uses portal axles, 110mm threaded shocks and a lift kit for extreme ground clearance. Oversized Canyon Trail tires are mounted to chrome 2.2" wheels to improve both performance and ground clearance. When the going gets tough, use your transmitter to shift into low range for incredible 4-wheel drive pulling torque. Shift into high range for blasting down the trail. Traxxas gives you the versatility to lock and unlock the front and rear differentials to suit your driving needs directly from your transmitter. Leave the differentials unlocked for relaxed driving on the trail with smooth, tight turning and better handling at high speeds. When the trail gets technical, lock the front and rear differentials, or just the front, for superior grip over extreme terrain.  Features: Molded Scale Detail: The 1979 Chevrolet K10 Pickup Body comes with authentic-looking chrome wheels, side mirrors and windshield wipers. Clip-less Body Mounting System: Traditional posts and body clips are gone, and instead an integrated quick-release system secures the body invisibly. The hidden mechanism holds tight on the trail yet releases in just seconds to access the chassis. Trail-tuned XL-5 HV Waterproof Electronic Speed Control: HV electronic speed control brings 3s LiPo capability for strong efficient running. The powerful 21T Titan motor provides torque for hauling heavy loads and climbing steep grades. Factory-Installed Long Arm Lift Kit: The lift kit not only gives you an extra inch of ground clearance but also maintains the TRX-4's suspension geometry. Extended Wheelbase: The K10’s steel frame rails extend the wheelbase out to 336mm to capture the pickup’s real-world proportions perfectly. The Power of Portals: The K10’s portal axles work in tandem with the Lift Kit to lift the truck for huge center ground clearance. The portal axles’ internal gear reduction virtually eliminates torque twist, keeping the K10 straight and on course. Extended Aluminum GTS Shocks: These shocks are 20mm longer than the standard GTS shocks. The threaded shock bodies are silver-anodized to deliver silky-smooth dampening. Oversize Wheels and Tires: The aggressive Canyon Trail tires feature large lugs for increased grip with foam inserts for realistic trail performance. Chrome Mag wheels come with replica locking hubs to conceal the wheel nuts. Sealed Ball Bearings: Reliable sealed ball bearings are used throughout the chassis for long-lasting performance. Specifications: Scale: 1/10 Length: 22.20inches (563mm) Track Width (Front/Rear): 10.60inches (270mm) Center Ground Clearance: 4inches (99mm) Height (Overall): 10.89inches (277mm) Wheelbase: 13.23inches (336mm) Weight (w/o Battery): 7.38lbs (3.35kg) Shock Length (Front/Rear): 4.33inches (110mm) Wheels (Front/Rear): 2.2 x 1.34inches (56x34mm) Tires (Front/Rear): 5.3 x 2.14inches (135x54mm) Approach Angle: 70° Departure Angle: 52° Breakover Angle: 67° Hex Size: 12mm Gear Pitch: 32P Battery Tray Size (LxWxH): 158.75x47x23/26mm Includes (1) Traxxas TRX-4 with K10 Body (1) TQi 2.4 GHz 4-Channel Transmitter Maintenance Tools Needed to Complete: (4) "AA" Batteries (for transmitter) (1) NiMH Battery (4-7 cell) or LiPo Battery (2S/3S) (1) Compatible Battery Charger This product is expected to become available for purchase on Thursday, April 6, 2023

Read more less

82016-4, Traxxas TRX-4 1/10 Scale Trail Rock Crawler Assembly Kit w/TQi 2.4GHz Radio The Traxxas TRX-4 Scale and Trail Crawler chassis kit offers the same innovative features as the RTR vehicle, combined with the fun and excitement of building your own kit. Build your own portal axles, high/low range transmission, and remotely locking differentials. All the parts are organized neatly in labeled bags with waterproof electronics and pre-assembled shocks and suspension links. A fully illustrated color manual makes the kit as much fun to construct as it is to take off-road. Easy to Follow Assembly InstructionsThe TRX-4 Chassis Kit isn’t just for expert hobbyists. Traxxas goes the extra mile to make the full-color instruction book easy to follow and fun to use. Each section corresponds to a labeled bag with step-by-step assembly instructions. True-to-scale part illustrations and ruler charts make it easy to differentiate between different screws, bearings, and gears. Helpful assembly tips and clear illustrations take the frustration out of the assembly process. Have fun on the workbench and on the trail with the new TRX-4 Chassis Kit. Features: Easy to follow full-color assembly manual Trail-tuned XL-5 HV Waterproof Electronic Speed Control Powerful Titan™ 21T reverse rotation motor Portal Axles Rigid Steel Frame Full-time shaft driven 4-wheel drive Tough 6mm stub axles Steel front CV driveshafts Hardened steel rear axle shafts Remote locking steel gear differentials with cable-actuation Steel gear transfer case Innovative Battery Compartments Secondary battery mount over front axle for forward weight bias Two speed high/low range transmission with remote shifting Superior 45° steering angle Front — 3 link with panhard Rear — Triangulated 4 link Pre-assembled heavy-duty rod ends with steel hollow balls 5mm diameter steel link rods with 4mm threaded ends Coilover GTS shocks exclusive to TRX-4 chassis Silver-anodized aluminum bodies Threaded bodies with collars easily adjust ride height Silky smooth damping for the toughest trails O-ring cap seal and dual X-ring shaft seals Shock oil included in kit 1.9” Canyon Trail tires with trail-tuned foam inserts Tough black scale wheels Trail tuned S1 rubber compound 12mm steel hex Tire glue required TQi™ 2.4GHz 4-channel transmitter Patented O-Ring sealed watertight receiver box keeps the micro receiver dry Sealed Ball Bearings Hex hardware with rust-resistant black oxide coating Specifications: Length: 20.57 inches (523mm) Front Track: 9.78 inches (249mm) Rear Track: 9.78 inches (249mm) Ground Clearance: 3.14 inches (80mm) Weight: 6.42lb (2.91kg) Height: 10.47 inches (266mm) Wheelbase: 12.28 inches (312mm) Front Shock Length: 3.54 inches (90mm) Rear Shock Length: 3.54 inches (90mm) Approach Angle: 63.82° Departure Angle: 43.22° Breakover Angle: 58.93° Front Wheels: 1.9 x 1.02 inches (49 x 26mm) Rear Wheels: 1.9 x 1.02 inches (49 x 26mm) Front Tires: 4.64 x 1.89 inches (118 x 48mm) Rear Tires: 4.64 x 1.89 inches (118 x 48mm) Wheel Hex: 12mm Speed Control: XL-5™ HV Motor (electric): Titan® 21T Reverse Rotation Transmission: 2-speed Hi-Lo, Remote Shifting Gear Pitch: 32 Brake Type: Electronic “Hill Hold” Skill Level: 2 Battery Tray: 158.75 L x 47 W x 23/26mm H Includes: Unassembled TRX-4 Chassis Kit TQi™ 2.4GHz 4-channel radio system Steering Servo 3 Sub Micro Servos (2-speed & diff locks) XL-5 HV waterproof ESC Titan® 21T 550 motor Full-color step-by-step assembly manual Needed to Complete: TRX-4 compatible body (313mm wheelbase) (4) AA batteries for transmitter 6 or 7 cell NiMH or 2s or 3s LiPo battery pack with Traxxas High-Current Connector Battery charger Metric hex drivers (1.5mm, 2.0mm, 2.5mm) Basic hand tools (screwdrivers, needle nose pliers) CA glue Safety glasses This product was added to our catalog on May 27, 2022

Read more less

82010-4, Traxxas TRX-4 Sport 1/10 Scale Trail Rock Crawler Assembly Kit The Traxxas TRX-4 Sport 1/10 Scale Trail Rock Crawler Assembly Kit combines all the technical capability of a TRX-4, with the flexibility to build it your way, for your terrain and off-road mission. The kit includes everything you need to assemble a complete roller, but allows you to choose your preferred electronics. This is the perfect kit for enthusiasts who want to customize the vehicle with their own choice of electronics. It also includes over $70 of highly detailed scale accessories that are sure to win points. Traxxas makes assembly easy with a full-color assembly guide with step by step instructions.  Features: Unassembled kit Pre-cut clear TRX-4 Sport body Includes over $70 of scale accessories Full color step-by-step assembly manual Portal Axles Steel-gear single speed transmission Aluminum coilover GTS shocks 1.9” Canyon Trail S1 compound tires with trail-tuned foam inserts Rugged black 5-spoke wheels Includes: Expedition Rack with traction boards, shovel, axe, jack, fire extinguisher, and fuel cans (#8120X) LED-ready front grill with lenses (Light kit #8116, sold separately)  LED-ready rear tail gate with lenses (Light kit #8117, sold separately) Snorkel with side mirrors (#8119) Tires and Wheels Needed to Complete: Transmitter & Receiver 1/10 Crawler ESC & Motor High Torque Steering Servo 2S to 3S LiPo Battery (158.75 L x 47 W x 23/26mm H Max) & Charger AA size Batteries for Radio System Paint for Body   Tools for assembly    This product was added to our catalog on April 17, 2021

Read more less