AXI90081, Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler w/2.4GHz Radio
The Axial SCX24 Deadbolt RTR 1/24 Scale Mini Crawler is the first Axial® off-roader in 1/24 scale. At less than 8" long, it's ideal for indoor fun, but performs so well, its equally suited to outdoor adventures as well. Even new drivers will be well-equipped to tackle tough climbs and rough trails. Like it's SCX10 big brother, the SCX24 uses plenty of steel components - from the C-channel frame rails to the front and rear axles and dogbones. Offering ready to run simplicity, scale looks, and confident handling on any trail, the SCX24 has the strength to keep pushing onward and upward.
The SCX24 chassis features a three-link front and four-link rear suspension for realistic handling. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. Plus, worm gear axles provide high ground clearance with a low gear ratio that helps to reduce torque twist.
Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. The shrunk down Deadbolt body provides the classic stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar that makes the 1/10 Deadbolt a performer - and the realism continues right down to the licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.
Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter!
Features:
Includes radio system, ESC and transmitter batteries
Includes motor and on-board LiPo battery
Realistic narrow-stance rock crawler body in olive green or red
Molded roll cage with realistic light bar
Realistic driver figure and many other scale details
Officially licensed KMC XD229 Machete Crawl wheels
Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread)
Full-time 4WD
Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
Steel front and rear axles, front stub axles and dogbones provide strength and durability
Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
Front and rear axles consist of a two-piece, molded plastic solid axle design
3-Link front and 4-link rear suspension supply optimal handling
Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance
Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist
Two LEDs in the front bumper for night driving
Specifications:
Approximate Assembly Time: No assembly required
Batteries: 7.4V 350mAh 30C LiPo
Body: Painted and trimmed Axial Deadbolt
Charger: USB LiPo charger
Chassis: Stamped steel rails
Completion Level: Ready-To-Run
Differential: Worm gear 16T/4T
Drivetrain: 4WD
Gear Pitch: 32-Pitch
Ground Clearance: 1.06" (27mm)
Height: 4.73" (120.2mm)
Length: 7.8" (199.5mm)
Motor Size: 180
Motor Type: Brushed
Pinion: 10T
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Size/Scale: 1/24
Speed Control: AE-6 ESC receiver/combo
Spur Gear: 55T
Suspension: Solid axle, front and rear
Tire Diameter: 2.0" (51mm)
Tire Tread: Nitto Trail Grappler M/T, large block tread
Track: 3.9" 99.5mm)
Vehicle Type: Crawler
Water-Resistant: No
Weight: 0.5lb (0.22kg)
Wheel Diameter: 1.0" (26mm)
Wheel Type: Black Plastic Licensed KMC XD229 Machete Crawl
Wheel Width: 0.48" (12.4mm)
Wheelbase: 5.25" (133.5mm)
Width: 3.9" (99.5mm)
Includes:
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
(1) Axial AE-6 ESC/receiver combo (installed)
(1) Dynamite® 88T brushed electric motor (installed)
(1) Axial AS-1 steering servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Manual
Needed to Complete:
Nothing! Everything you need to begin having fun with your 1/24 scale Deadbolt is included!
This product was added to our catalog on May 29, 2019
AXI00003, Axial AX24 XC-1 1/24 4WD RTR 4WS Mini Crawler w/2.4GHz Radio, Battery & Charger
The Axial AX24 XC-1 1/24 4WD Ready to Run Mini 4WS Crawler is designed to push the limits of 1/24 RTR crawlers. The AX24 platform provides stability, durability, high clearance, generous articulation, and everything else extreme rock crawling enthusiasts need to overcome the impossible. Flat chassis side plates with rock sliders help you move through tight formations. Long travel shocks, a 4-link suspension, and a worm gear drivetrain combine for easy handling, dependable power delivery, and the ability to clear rough terrain. With 4-Wheel Steer, there are three transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl".
The AX24 XC-1 isn't just for experienced RC rock crawling hobbyists. Everyone will find it to be a highly capable mini crawler to run on indoor or outdoor courses. Get ready to push past boundaries and conquer more trails with the Axial AX24 XC-1 Rock Crawler RTR. This AX24 includes everything you need to get out and start having fun!
Features:
Three 4-wheel steering (4WS) modes give all drivers terrain conquering ability.
Side plate chassis allows greater articulation for improved handling over rough terrain.
LED rock lights mounted in the rock sliders keep your path visible in low light.
1.0" Rockstar wheels and Rock Lizards tires produce trail-taming traction.
Fully equipped — you can hit the trails almost immediately!
Specifications:
Scale: 1/24
Length: 7.8" (198 mm)
Width: 4.5" (114 mm)
Height: 3.7" (94 mm)
Ground Clearance: 1.3 in (34mm)
Wheelbase: 5.3" (135 mm)
Drivetrain: 4WD
Power Type: Electric
Connector Type: PH 2.0 (High-Current Ultra Micro)
Motor Type: Brushed
Pinion: 11T
Spur Gear: 55T
Completion Level: Ready-To-Run
Includes:
(1) Axial AX24 XC-1 1/24 Scale 4WS RTR Rock Crawler
(1) Spektrum SLT3 2.4GHz 3-Channel Radio System
(4) AA Transmitter Batteries
(1) Dynamite 350mAh 2S 7.4V LiPo
(1) 0.5 Amp USB Charger
(1) Product Manual
Needed to Complete:
Nothing! Everything you need to get out and have fun is in the box!
This product was added to our catalog on January 27, 2023
AXI00005, Axial SCX24 Jeep JT Gladiator 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio
Axial SCX24 Micro Size Rock Crawler, with Jeep JT Gladiator Body!
The Axial SCX24 Jeep JT Gladiator 1/24 4WD RTR Scale Mini Crawler, is a longer wheelbase SCX24 that is ready to hit the trail or the desk. The included Jeep JT Gladiator body depicts a scale interior, driver and detailed Tuff Stuff Overland scale accessories. Based on the proven SCX24 chassis, your everyday life has just become an excellent course. Unfolded laundry? More like a mountain for your truck to get up. Bored at work? Crawl on your desk, we won't tell HR. Out on a hike? Take this with you for an action packed day. With water-resistant electronics and performance driven design, this truck is ready to go the distance and perform like a champ.
For extreme crawling performance, this mini crawler has been extended 22mm to increase stability and allow a more scale fitment of the body. The axles use steel front and rear axles, steel stub axles and steel dogbones to give you peace of mind while tackling any obstacle. An 88T motor and 2S LiPo battery are used to provide precise, dependable control. The detailed body rides on licensed KMC Machete wheels with scale Nitto Trail Grappler M/T tires. The body uses a hinged designed, allowing for quick battery access for less downtime on the trails. Two LEDs are preinstalled into the front bumper for great night crawling options. The SCX24 Jeep JT Gladiator comes ready-to-run with radio and electronics included.
Features:
Factory-assembled and ready-to-run
Detailed Jeep Gladiator body with scale interior, scale driver and Tuff Stuff Overland scale accessory pack
Two LED lights in front bumper
Officially licensed Nitto Trail Grappler M/T tires mounted on officially licensed KMC XD Machete wheels
True full-time 4-wheel drive
22mm longer wheelbase for best body fitment
Durable 3-link front/4-link rear suspension for optimal crawling performance
Worm drive front and rear differential gears for increased ground clearance
Sturdy steel C-channel frame rails with bracing for added strength and proper alignment
Durable steel axles provide strength and durability to match tough climbs and rough trails
Hook-and-loop body hinge for easy, tilt-open battery access
Specifications:
Scale: 1/24
Drive: 4WD
Motor Type: Brushed
Vehicle Type: Rock Crawler
Includes:
(1) Axial SCX24 Jeep Gladiator 1/24 Scale 4WD RTR with:
(1) Horizon 2.4GHz 2-Channel Radio System
(1) Axial AS-1 Servo
(1) Horizon ESC/Receiver Combo
(1) Dynamite 88T Brushed Electric Motor
(1) Dynamite 350mAh 2S LiPo 7.4V
(1) USB Charger
(4) AA Batteries for Transmitter
Needed to Complete:
Nothing! This truck is ready to go out of the box.
This product was added to our catalog on February 3, 2022
AXI00002V2, Axial SCX24 2019 Jeep Wrangler JLU CRC 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio
The Axial SCX24 2019 Jeep Wrangler JLU CRC 1/24 4WD RTR Scale Mini Crawler with 2.4GHz Radio is ready to crawl the trail or the desk. Your everyday life has just become an excellent course. Unfolded laundry? More like a mountain for your truck to get up. Bored at work? Crawl on your desk, we won't tell HR. Out on a hike? Take this with you for an action packed day. With water-resistant electronics and performance driven design, this truck is ready to go the distance and perform like a champ.
Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The Axial SCX24 Jeep Wrangler JLU CRC performs like a winner. The detailed body rides on licensed KMC Machete wheels with scale Nitto Trail Grappler tires. The body uses a hinged designed, allowing for quick battery access for less downtime on the trails. Two LEDs are preinstalled into the front bumper for great night crawling options. The SCX24 Jeep Wrangler JLU CRC comes ready-to-run with radio and electronics included and installed.
Features:
3-Link front and 4-link rear suspension for optimal handling
Two LED lights are included in the front bumper for night driving
Realistic steel frame rails add strength
True, full-time 4-wheel-drive
Comes with ESC, motor, and servo already installed
Specifications:
Scale: 1/24
Length: 7.8" (198mm)
Width: 3.9" (99mm)
Height: 4.2" (107mm)
Wheelbase: 5.2" (132mm)
Ground Clearance: 1.06" (27mm)
Front Track Width: 3.9" (99.5mm)
Rear Track Width: 3.9" (99.5mm)
Tire Tread: Nitto Trail Grappler
Wheel Width: 0.48" (12.4mm)
Pinion: 10T
Spur: 55T
Differential: 16T/4T (Worm Gear)
Includes:
(1) 1/24 Axial SCX24 2019 Jeep Wrangler JLU CRC 4WD Rock Crawler Brushed RTR with
(1) ESC/Receiver (installed)
(1) 88T Motor (installed)
(1) AS-1 Micro Servo (installed)
(1) 4-Channel 2.4Ghz Surface Transmitter
(1) Dynamite 7.4v 350mAh 2S LiPo Battery
(1) USB Charger
(4) AA Batteries
Needed to Complete:
Nothing! Everything you need to get crawling is in the box.
This product was added to our catalog on December 10, 2021
AXI03022B, Axial Capra 1.9 4WS Unlimited Trail Buggy 1/10 RTR 4WD Rock Crawler w/DX3 2.4GHz Radio
The Axial Capra 1.9 4WS Unlimited Trail Buggy 1/10 RTR 4WD Rock Crawler is ready to give you a more effective way to combat the trail. Axial has equipped this Capra model with 4-wheel steer for enhanced maneuverability and performance. Using the functions found on the included transmitter, you can steer the axle from 0 (straight), to 50% or 100% left and right. Get ready to dominate the trail with the Axial Capra 1.9 equipped with 4-wheel steering.
The transmission includes an optional Dig setup that is disabled from the factory (and requires an optional to a 4-channel radio and micro servo for use - not included). To have Dig and rear steering capabilities, remove the spacer from inside the transmission and install your micro servo. With the flick of a transmitter button, you can now activate Dig and lock the rear drive axle. That allows you to pull the buggy around by the front end while holding the rear in place.
The tube chassis of the Capra 1.9 4WS Unlimited Trail Buggy offers realistic scale rock crawler buggy looks and is optimized for suspension and tire clearance. Currie F9 Portal Axles deliver 45° of steering with extra ground clearance. Both axles feature metal universals that produce smooth action for an efficient and durable drivetrain. All links and suspension pivots are made of rust-proof stainless steel and provide precise, durable suspension points.
The included Spektrum DX3 transmitter features exclusive DSMR technology for superior range, response, and interference resistance. It's also fully compatible with the Smart telemetry potential provided by the vehicle's Spektrum Firma 2-in-1 40A Smart ESC/Receiver. Using a Spektrum Smart LiPo pack, you can follow on-board battery capacity on the transmitter's voltage level indicator while driving with confidence in any weather and trail conditions - the electronics are protected by a waterproof and dustproof design.
Features:
Includes front and rear steering out of the box for the ultimate in precise maneuverability
Also includes an optional Dig setup — unlock the Dig transmission and upgrade to a 4-channel radio and micro servo to operate the Dig feature while also having rear steering
Currie F9 Portal Axles offer 45° of steering with extra ground clearance for the best crawling performance
Tube chassis design offers the realistic scale looks of a rock crawler buggy and is optimized for suspension and tire clearance
Included Spektrum™ DX3™ 2.4GHz DSMR® radio provides superior range, response, and interference resistance and is compatible with Smart technology
Front and rear axles each come with a Spektrum™ S614 Metal-Gear servo installed for steering
Licensed Nitto Trail Grappler M/T tires offer a wider tire patch and more traction
Metal universal joints on both axles provide smooth action and 45 degrees of steering for an efficient, high-performance drivetrain
Specifications:
Length: 17" (432 mm)
Width: 10.25" (260 mm)
Height: 8.25" (210 mm)
Weight: 4.5lbs (2.04kg)
Wheelbase: 12.5" (318 mm)
Front Track: 8.75" (222.25mm)
Rear Track: 8.75" (222.25mm)
Ground Clearance: 3" (76.2mm)
Internal Gear Ratio: 5.14:1
Final Drive Ratio: 37:1
Includes:
(1) Axial Capra 1.9 1/10 4WS Unlimited Trail Buggy RTR with:
(1) Spektrum Firma 40A Brushed Smart 2-in-1 ESC and Receiver (installed)
(1) Axial 35T Brushed Motor (installed)
(2) Spektrum 15Kg Waterproof Servo 23T (installed)
(1) Axial LED Light Set (installed)
(1) Spektrum DX3 2.4GHz Smart 3-Channel Radio Transmitter
(4) AA Transmitter Batteries
(1) Product manual
Needed to Complete:
(1) 2-3S LiPo Battery with IC3 or EC3 Connector
(1) Compatible Battery Charger
This product was added to our catalog on March 2, 2022
AXI00007, Axial SCX24 40's 4 Door Dodge Power Wagon 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio
The Axial & SCX24 Power Wagon comes out of the box fully assembled and ready-to-run. The SCX24 Power Wagon features an exceptionally detailed and extra-durable ABS hard body with an overlanding rack and accessories, included for optional installation, to add to the scale realism. it looks ready to take on all the wilderness excursions! This authentic scale body is available in two color options based on classic Dodge colors. Serious scale modelers will find that this Power Waggon not only looks the part but performs just as good as it looks while bringing next level realism to the SCX24 platform. Completing this monstrous trail killer are a sticky set of Pro-Line Interco Super Swamper tires mounted on a mean set of matte black Pro-Line Impulse Bead-Loc wheels.
The SCX24 Dodge Power Waggon is built on the proven and easy-to-drive SCX24 chassis. The SCX24 makes it easy to find RC adventures everywhere. Go crawling on your desk, Turn a messy room into an obstacle course, Build an indoor crawling course on the kitchen table, or take your SCX24 outdoors and set up an exciting trail with a few holes, twigs, and rocks. Whatever course you follow, the SCX24 chassis meets every challenge with full-time 4-wheel drive, a trail-taming 3-link wishbone front with 4-link rear suspension, and much more. Realistic steel frame rails stand up to hard knocks. Worm gears on the axles increase ground clearance. Steel front and rear axles, front stub axles, and steel dogbones let you crawl and climb with confidence. Power is supplied by a Dynamite 88T 180-size motor and Spektrum 2S LiPo battery, while a Spektrum SLT2 2.4GHz radio system is included for precise, dependable control. Adventure is out there! just waiting to be explored!
Features:
Factory-assembled and ready-to-run, with Spektrum SLT2 radio, 180 brushed motor, servo, ESC/receiver unit, and "AA" transmitter batteries included
Pro-Line Interco Super Swamper tires mounted on Pro-Line Impulse Bead-Loc wheels
Working head lights and tail lights, with molded lenses
True full-time 4-wheel drive
Durable solid axle front and rear suspension and coilover shocks for optimal handling and crawling performance
Worm drive gears in front and rear differentials increase ground clearance
Sturdy steel C-channel frame rails with bracing for added strength and proper alignment
Durable steel axles provide strength and durability to match tough climbs and rough trails
2-Year limited warranty (see product manual for details)
Specifications:
Scale: 1/24
Length: 9.65" (245mm)
Width: 4.1" (104.1mm)
Height: 4.2" (107mm)
Wheelbase: 6.1" (155mm)
Weight: 11.5oz (325.5g)
Includes:
(1) Axial® SCX24™ 40's 4 Door Dodge Power Wagon 1/24 Scale 4WD RTR
(1) Spektrum SLT2 2.4GHz Transmitter
(1) Axial® AS-1 Micro Servo
(1) Spektrum 2 in 1 10Amp ESC/Receiver
(1) Spektrum USB LiPo Charger
(1) Dynamite 88T 180-Size Brushed Electric Motor With Pinion
(1) Spektrum 350mAh 2S 30C 7.4V LiPo Battery
(4) AA Batteries for Transmitter
(2) Decal Sheets
(1) Product Manual
Needed to Complete:
Everything you need to drive is included
This product was added to our catalog on October 3, 2023
AXI05001T2, SCX6 Trail Honcho: 1/6 4WD RTR Sand
For those who want the biggest, baddest RC rock crawler ever, the legendary Axial® Honcho™ is now available on the 1/6 scale SCX6™ 4WD platform. With its 2-speed transmission and powerful Spektrum™ Smart electronics, this massive RTR is an absolute beast!
Based on the legendary Axial® Honcho™
New vehicle option on the SCX6™ platform
Increased performance due to body design
Two-speed metal gear transmission
Spektrum™ Smart 3-channel radio and electronics
AXI05000, 1/6 SCX6 Jeep JLU Wrangler 4WD Rock Crawler RTR
Overview
Fans of rock crawling, large-scale models, and Jeep® vehicles alike will be thrilled with the extreme detail and high-performance functionality of the SCX6™ Jeep® JLU Wrangler 4WD RTR. At 1/6 scale, it takes Axial® off-road adventuring to a new level.
In The Box
(1) Axial® SCX6™ Jeep® JLU Wrangler 1/6 Scale 4WD RTR
(1) Spektrum™ DX3™ Smart Transmitter with Thumb Steer
(1) Spektrum™ 5-Channel DSMR® Sport Receiver
(1) Spektrum™ 1/6 40kg Waterproof Digital Servo
(1) Spektrum™ 15kg Servo for 2-speed Shifting
(1) Spektrum™ Firma™ Crawler 120A Sensored Brushless Smart ESC
(1) Spektrum™ Firma™ 1200Kv Sensored Brushless Motor
(1) Servo Adapter for Large Scale Servos
Needed to Complete
(1) 2S-3S Standard or “Shorty” LiPo Battery
(1) Compatible Battery Charger
Features
The first ever Axial® 1/6 scale chassis design based on the proven SCX10™ III
Includes AR90 "Standard" axles with a heavy-duty spool
Metal gear transmission comes configured for two speeds with high and low gears
Durable three-link front and four-link rear suspension setup provides optimal handling
Replica V8 engine cover adds to the realistic appearance
Spektrum™ DX3™ 2.4GHz DSMR® radio provides superior range, response, and interference resistance and is compatible with Smart technology
Spektrum™ Firma™ Crawler 120A ESC feeds telemetry data to the DX3™ transmitter in real time
Includes a powerful Spektrum™ S905 Large Scale Metal Gear steering servo (also accepts larger 1/5 scale servos with the included adapter)
Detailed Jeep® JLU Wrangler body with LED headlights and taillights provides exceptional scale looks
High-traction, 7" tall BFGoodrich® KM3 tires are mounted on Black Rhino Primm 3-piece beadlock wheels
Battery trays adjust to fit a wide range of battery sizes
2-Year limited warranty (see product manual for details)
Axial Takes Scaling To A New Level
At 1/6 scale, the ready-to-run SCX6™ Jeep® JLU Wrangler 4WD brings a whole new dimension to RC crawling — and Axial® engineers have done it right. Whether you're a fan of full-size Jeep® vehicles, rock crawling, large-scale models, or all of the above, you'll be thrilled by the amount of realistic detail and high-performance functionality found here.
The SCX6™ Jeep® JLU Wrangler 4WD takes Axial® "scaling" to the next level. Based on the proven SCX10™ III, the SCX6™ chassis might be considered its big brother. It's engineered for extreme durability and performance with AR90 axles. For optimal handling, the chassis has a three-link Panhard front and four-link rear suspension setup. The transmission offers high and low gears out of the box, with a Spektrum™ S614 Metal-Gear Servo included and installed for the two-speed linkage.
While the 1/6 scale size allows more room for impressive detail, the SCX6™ Jeep® JLU Wrangler 4WD still fits conveniently into the trunk of your car — and most rock gardens and hiking trails provide plenty of exciting challenges to overcome. As you navigate the trails, you'll admire how well the Jeep® JLU Wrangler body reproduces its full-size counterpart. Even the most demanding Jeep® enthusiasts will appreciate the accuracy of the details molded throughout. When the sun goes down, LED headlights and taillights add even more realism.
Massive, 7" tall BFGoodrich® KM3 tires provide excellent grip and ground clearance for dirt, rocks, and all other off-road surfaces. They're mounted on licensed Black Rhino Primm injection-molded, 3-piece beadlock wheels so that the tires can be removed and replaced easily without gluing. Forest, desert, lake, mountains...the SCX6™ Jeep® JLU Wrangler 4WD is ready to go anywhere.
With the included Spektrum™ DX3™ radio, you'll enjoy the superior range, response, and interference resistance of exclusive DSMR® technology. Together with the installed Firma™ Crawler 120A Smart Sensored-Brushless ESC, it also comes ready to deliver the telemetry advantages of exclusive Spektrum™ Smart technology. Install a Spektrum™ Smart LiPo battery and you can view vehicle battery capacity on the transmitter's voltage level indicator. Outfit the DX3™ with the optional BT2000 Bluetooth module, download the free Spektrum™ Dashboard app to your smart device, and you're ready to use more Smart real-time telemetry — without needing on-board sensors or modules.
With its 1/6 scale size, popular Jeep® styling, and unstoppable Axial® engineering, the SCX6™ Jeep® JLU Wrangler 4WD takes RC scaling to an exciting new level. Just add your choice of suitable battery and take on the rocks!
Video Overview
SCX6™ CHASSIS
Based on the proven SCX10™ III layout, the 1/6 scale SCX6™ takes durability, functionality, and performance to the next level with features that include a steel chassis, 4-wheel drivetrain, multi-link suspension, AR90 axles, oil-filled shocks, and more.
TWO-SPEED METAL GEAR TRANSMISSION
Out of the box, the Axial® SCX6™ Jeep® JLU Wrangler 4WD RTR is configured for two speeds with high and low gears. A Spektrum™ S614 Metal-Gear Servo is included for the two-speed linkage.
3-LINK FRONT/4-LINK REAR SUSPENSION
For optimal handling, the SCX6™ suspension features a durable three-link front and four-link rear setup.
JEEP® JLU WRANGLER SCALE BODY
The Jeep® JLU Wrangler body mirrors its full-size counterpart, with many molded scale details throughout the interior and exterior that even the most demanding Jeep® enthusiasts will admire. LED headlights and taillights add to the realism after dark.
SCALE ENGINE DETAIL
A replica V8 engine covers and protects the included Spektrum™ Firma™ Smart ESC while adding to the model's realistic appearance.
SPEKTRUM™ DX3™ 2.4GHz DSMR® TRANSMITTER
The included Spektrum™ DX3™ radio features exclusive DSMR® technology for superior range, response, and interference resistance. It's also fully compatible with the Smart telemetry potential provided by the vehicle's installed Spektrum™ Firma™ 120A Smart ESC.
SPEKTRUM™ FIRMA™ CRAWLER 120A SENSORED BRUSHLESS SMART ESC
The factory-installed, waterproof Firma™ Crawler 120A Smart ESC delivers power and intelligence all-in-one — no additional vehicle modules or links required. This brushless ESC gives your SCX6™ Jeep® JLU Wrangler 4WD the ultimate drive while feeding important telemetry data straight to your DX3™ transmitter in real time.
SPEKTRUM™ S905 STEERING SERVO
Included and installed, the waterproof Spektrum™ S905 Large-Scale Metal-Gear Servo produces impressive torque (537.72 oz-in at 6V, 555.50 oz-in at 7V) for responsive, dependable steering control. The chassis will also accept larger 1/5 scale servos, if desired, with the included adapter.
BFGOODRICH® KM3 TIRES
Massive, 7" tall BFGoodrich® KM3 tires provide excellent grip and ground clearance for dirt, rocks, and all other off-road trails. They're mounted to licensed Black Rhino Primm injection-molded, 3-piece beadlock wheels so that tires can be removed and replaced easily without gluing.
MULTIPLE BATTERY MOUNTING LOCATIONS
Battery trays are included on both the right and left sides of the chassis. You can install a single battery or add a second on the opposite side (using a parallel Y-harness, SPMXCA509) to extend run time.
Product Specifications
Ball Bearings
Complete Vehicle
Battery
Sold Separately
Body
Polycarbonate
Charger
Sold Separately
Chassis
Stamped Steel
Completion Level
Ready-To-Run
Differential
Locked
Drivetrain
4WD
Drive Type
Forward/Brake/Reverse
Final Drive Ratio
85.02:1 / 25.1:1
Front Track
14.88 in (378 mm)
Power Type
Electric
Gear Pitch
1.0 MOD
Ground Clearance
4.25 in (107.9 mm)
Internal Gear Ratio
23.73:1 / 7.20:1
Motor Size
1/6 "5684"
Motor Type
Brushless - Sensored
Pinion
14T
Product Height
14.55" (370 mm)
Product Length
33.55" (852 mm)
Product Weight
25 lb (11.3 kg)
Product Width
14.88" (378 mm)
Radio
Included
Rear Track
14.88 in (378 mm)
Receiver
Included
Scale
1/6
Servos
Included
Shock Type
Oil-Filled/Coil-Over Spring
Speed Control
Included
Spur Gear
50T
Suspension
Multi-Link Solid Axle
Tire Compound
Soft
Tire Tread
BFGoodrich KM3
Vehicle Type
Rock Crawler
Wheelbase
19.74" (501 mm)
Wheel Width
2.05 in (52 mm)
Introduction
The iconic paint scheme of the classic Grave Digger® 1950s-style panel van — a ghoulish blend of black, purple and green — has thrilled fans of the full-scale Monster Jam® legend for many years. Axial® Racing obtained the license from Feld Motorsports to offer the Grave Digger® for the first time as a true-to-scale, 4-wheel drive, straight-axle RC monster truck. The RC Grave Digger® rides on the Axial® SMT10™ tube frame chassis, which was developed for maximum bashing strength and an extremely detailed appearance. High-quality electronics also contribute to the Grave Digger® model’s never-say-die performance. Available ready-to-run, the vehicle comes with a 2.4GHz Spektrum™ radio system and powerful Dynamite® motor and ESC. Together with incomparable Axial® engineering, they make the 1/10 scale SMT10™ Grave Digger® the perfect bashing monster truck for everyone from scale RC enthusiasts to full-size monster truck fans. On grass, gravel, pavement and asphalt tracks, it’s ready to make your competition scream!
Overview
Monster Jam® is the world’s largest and most famous monster truck tour, where world-class drivers compete in racing and freestyle events before capacity crowds. One of its most celebrated attractions is Grave Digger®, which thrills monster truck fans with jaw-dropping, gravity-defying feats. For its part, Axial® Racing has become synonymous with RC crawler vehicles that inspire endless adventure and creative freedom. Put them together and you have a true-to-scale, 4-wheel drive, straight-axle Monster Jam® RC truck that’s the perfect basher for everyone from scale RC enthusiasts to full-size monster truck fans — the Axial® SMT10™ Grave Digger® 1/10 4WD Monster Jam® Truck RTR.
Licensed from Feld Motor Sports, Inc., the genuine Grave Digger® ‘50s-era panel van body is as ghoulishly real as it gets, from the trademark graveyard paint scheme and chrome Zoomie headers to the driver figure with glow-in-the-dark helmet. BKT Monster Jam® style tires with foam inserts add more scale realism along with impressive grip and handling on a wide range of terrain.
Everything going on beneath the scale body is just as exciting. Axial® designers went all out when creating the chassis and roll cage for the SMT10™ Grave Digger® monster truck. Very similar to those of full-size Monster Jam® trucks, the SMT10™ tube frame chassis was developed for maximum strength and has an extremely realistic appearance. There are a variety of shock mounting points for suspension tuning options, with additional mounting points on the cage and at the axle for moving the shocks to a more scale, vertical position if desired. Mated to the proven Axial® AR60™ axle, the 4-link suspension soaks up any obstacles in its path.
The Axial® SMT10™ Grave Digger® 1/10 4WD Monster Jam® Truck comes factory-built and ready-to-run with updated, improved electronics and radio gear. The Dynamite® 550-size motor provides higher torque and top speed for pulling off radical monster truck moves. It’s matched with a LiPo- and NiMH-compatible Dynamite® 60A ESC that features forward/brake/reverse, forward/brake and crawler drive modes.
The included FHSS 2.4GHz radio gear is all high-quality Spektrum™ brand equipment. The STX2® 2-channel transmitter and SRX200 receiver provide fast response and outstanding range. Enjoy precise, interference-free control while striking terror in your bashing competition!
Grave Digger, Monster Jam and all related logos and characters/designs are intellectual property of and used under license from Feld Motor Sports, Inc
Needed to Complete
2S LiPo Battery Pack with IC3™ connector
Battery Charger
(4) AA batteries for the transmitter
What's in the Box?
(1) Axial® SMT10™ Grave Digger® 4WD Ready-to-Run
(1) Spektrum™ STX2® 2.4GHz Transmitter
(1) Spektrum™ SRX200 Receiver
(1) Spektrum™ S614 Servo
(1) Dynamite® DYNS1222 12-Turn 550 Brushed Motor
(1) Dynamite® DYNS2210 60A FWD/REV Brushed ESC
Video Overview
