TRA3785, Traxxas Titan 550 Size Motor (12T)
The Titan 12T 550 modified motor is designed for incredible mod-motor power output with virtually maintenance-free operation, and long-lasting performance. The Titan 12T 550 motor’s integrated cooling fan pulls cool air through the motor to keep temperatures down. A cooler running motor allows faster speeds, longer runtime, and extended motor life.
NOTE: Titan 12T motors are intended for use in single motor and single battery pack applications, up to 8.4 volts. Traxxas does not recommend the use of Titan 12T motors in dual motor vehicles, such as the E-Maxx.
Replacement part for these models:
1/16 E-Revo
1/16 Slash 4WD
1/16 Summit
4-Tec 2.0 AWD Chassis
Bandit
BIGFOOT
Chevrolet Corvette Stingray
Factory Five '33 Hot Rod
Ford F-150 Raptor
Ford Fiesta ST Rally
Ford GT
Rustler
Slash
Stampede
Toyota GR Supra GT4
This product was added to our catalog on September 7, 2021
TRA7575R, Traxxas LaTrax 370 Motor w/Bullet Connectors
Fits:
LaTrax 1/18 Rally
LaTrax 1/18 SST
This product was added to our catalog on September 7, 2021
TRA2075, Traxxas 2075 Digital High Torque Waterproof Servo
This is a replacement Traxxas Digital High Torque Waterproof Servo.
Specifications:
Torque: 125 oz-in
Speed: 0.17 sec/60°
This product was added to our catalog on April 20, 2021
TRA6814, Traxxas VXL-3S Velineon Brushless Power System Combo (Waterproof)
The next generation of extreme brushless horsepower is here, Ready-To-Race® from Traxxas—and now waterproof! Velineon™ is the ultimate brushless system delivering the tire melting horsepower, supercharged speeds, and ease of use that you expect from Traxxas. Just plug it in and it works.
The key to the Velineon’s extreme power output is total system optimization. Each component, from the Traxxas high-current battery connector, to the powerful Velineon 3500 brushless motor, is carefully engineered to work with other system components to eliminate restriction and allow maximum power flow. High-frequency transistors and advanced circuit design delivers incredibly smooth and refined throttle control. The Velineon system accepts the widest range of battery types, including 3-cell Lithium Polymer packs (3S LiPo packs). Built-in low-voltage detection in the VXL-3s electronic speed control helps keep LiPo battery packs in top condition.
Traxxas’ exclusive waterproof technology allows the Velineon system to operate in wet conditions, including mud and snow, with no special precautions required. You decide where the Velineon powered adventure leads—the only limits are your imagination.
Key Features:
Now Waterproof
Compatible with brushed, brushless and sensored brushless motors
Auto-detects the motor type
Accepts NiCad, NiMH (4-10 cells), and LiPo (2-3cells) battery packs
Built-in-two-stage low-voltage detection for LiPo battery packs
3 drive profiles:Sport Mode, Race Mode, and Training Mode
Two-Stage Thermal shutdown protection
Velineon 3500 Brushless Motor
10-Turn, 3500kV
Optimized for extreme power and efficiency in 1/10 vehicles
This product was added to our catalog on May 7, 2021
TRA2075R, Traxxas Digital High Speed Waterproof Servo
The digital 2075R High-Speed Metal Gear Servo features a waterproof case for worry-free driving in water, mud, or snow. Ball bearings increase steering precision with the superior durability of all-metal gears for the ultimate driving experience.
This product was added to our catalog on September 7, 2021
TRA2075X, Traxxas 2075X High Torque Metal Gear Waterproof Digital Servo
This is a replacement Traxxas 2075X Digital High Torque Metal Gear Waterproof Servo. This servo is included with the TRX4 as standard equipment.
Features:
Metal Gear, Ball Bearing
Digital High-torque 125 oz-in.
Transit Time .17 sec/60°
L=55mm, H= 42.75mm, W=21.5mm
Fits:
Traxxas 4-Tec 3.0
Traxxas Drag Slash
Traxxas E-Revo VXL 2.0
Traxxas Hoss
Traxxas Rustler 4x4
Traxxas TRX-4
Traxxas TRX-4
Traxxas Unlimited Desert Racer
This product was added to our catalog on April 14, 2021
TRA3351R, Traxxas Velineon 3500 Brushless Motor (10T/3500kV)
This is the Traxxas Velineon 3500 Brushless Motor. The Velineon 3500 Brushless Motor features a precision balanced rotor, high-speed ball bearings, and ultra high-temperature Neodymium magnets for a great blend of power and long-life. The Velineon 3500 delivers consistent, high-power output, run after run.
Features:
Ultra high-temperature sintered Neodymium magnets provide
massive torque and linear power
Optimized for power and efficiency in 1/10th scale vehicles
Consistent, high-power output, run after run
Low-maintenance, unique Traxxas design
Efficient, high-speed ball bearings
Low maintenance design
Precision-balanced rotor
Protective end cap
10-Turn, 3500Kv
Rebuildable
Hex hardware
Brilliant blue-anodizing finish
Silicon steel laminations
Delivers more power than comparable brushed motors
Note: The motor is not compatible with the older TRA3355X ESC. It must be used with the newer TRA3355R ESC.
This product was added to our catalog on May 8, 2021
SPMXCA507, Spektrum RC 4" IC3 Battery to IC5 Device SMART Battery Adapter Cable
The Spektrum 4" IC3 Battery to IC5 Device SMART Battery Adapter Cable allows you to connect batteries with an IC5 or EC5 connector to your IC3 connector equipped device. This charge lead features a male bullet/female housing IC5 connector, combined with a female bullet/male housing IC3 connector, that is joined with 4"/100mm long 12awg wire.
This product was added to our catalog on May 24, 2021
TRA3070X, Traxxas TRX Device Connector (2 Male)
Traxxas TRX Device Connector. Package includes two replacement connectors intended for Traxxas ESC's. NOTE: These connectors should only be used as replacement connectors for a Traxxas ESC.
This product was added to our catalog on May 7, 2021
TRA2065R, Traxxas Servo Sub-Micro Waterproof Metal Gear
Servo, sub-micro, waterproof, metal gearThe 2065R waterproof sub-micro servo adds the superior durability of all-metal gears for the best driving experience possible.
Accessory part for these models:
1/18 LaTrax® Desert Prerunner
1/18 LaTrax® Rally
1/18 LaTrax® Teton®
Summit
TRX-4M™ 1/18 Ford® Bronco®
TRX-4M™ 1/18 Land Rover® Defender®
TRX-4® 1979 Chevrolet® Blazer®
TRX-4® 1979 Ford® Bronco®
TRX-4® Chevrolet® K10 High Trail Edition™
TRX-4® Equipped with Traxx®
TRX-4® Ford® Bronco®
TRX-4® Ford® F-150® High Trail Edition™
TRX-4® Land Rover® Defender®
TRX-4® Sport Unassembled Kit
TRX-4® Sport
TRX-4® Unassembled Kit
TRX-6® Mercedes-Benz® G 63® AMG 6X6
This product was added to our catalog on September 7, 2021
PTK-5626, ProTek RC Heavy Duty EC5 Charge Lead (Male EC5 to 4mm Banana Plugs)
This is a ProTek R/C EC5 Device Charge Lead. This charge lead features two 4mm bullets fixed to 14awg wire.
This product was added to our catalog on December 16, 2021
TRA3064X, Traxxas Parallel Battery Wire Harness (Traxxas ID)
Traxxas Parallel Battery Wire Harness. Use the parallel harness to combine battery capacity and get extra long runtimes of your model. Dual-battery operation requires attention to precautions outlined in the model's owners manual. Follow all precautions to assure peak performance and reliability of your model and batteries.
Traxxas parallel and series Y-harnesses are for use with 2/3A battery packs only.
This product was added to our catalog on September 7, 2021
PTK-5211, ProTek RC Heavy Duty 15cm Universal Servo Y Extension Lead (1 Male/2 Female)
This is one 15cm (6") universal servo Y extension lead from ProTek R/C. These are excellent servo extension leads made with thick, high quality 22awg wire for maximum current carrying capacity and strength.
The male plug installed on these extension leads are JR style connectors and will work with any radio system. The two female ends are designed to accept Futaba connectors, as well as JR, Aitronics and HiTec connectors. When plugging JR style connectors into the female connector, be sure to check for the correct polarity.
This product was added to our catalog on December 16, 2021
TRA2085X, Traxxas X-Maxx/XRT/Maxx Waterproof Digital High-Torque Servo
This is the Traxxas X-Maxx/XRT Waterproof Digital High-Torque Servo. This metal gear (ball bearing) waterproof servo also includes the servo saver spring and assembled steering link.
The X-Maxx steering servo includes full metal gears and adds a massive 23% more torque to take on the most extreme environments. The kit also includes a stiffer servo saver spring and steel steering linkage for increased precision and control during high speed driving.
Accessory part for these models:
Traxxas Maxx
Traxxas X-Maxx
Traxxas XRT
This product was added to our catalog on May 7, 2021
TRA2046, Traxxas Servo connector, Y adapter (for dual-servo steering)
The Y-adapter allows you to connect two servos to a single receiver port for trucks with dual-servo steering.
This product was added to our catalog on May 7, 2021
TRA3975R, Traxxas TRX-4 Titan 550 Reverse Rotation Motor (21T)
The Titan 550 is a 21-turn fan-cooled 550 size motor capable of handling 14.4 volts. This powerful motor has a 30% longer armature than a standard 540 size motor for extreme monster torque.
Key Features:
21 turn/ 14V
fan-cooled
30% longer armature
This product was added to our catalog on September 7, 2021
TRA1844, Traxxas Large Servo Saver
This is a large servo saver from Traxxas. This servo saver mounts to the servo, and provides protection for your steering servo by allowing flex in the steering linkage during a crash.
This product was added to our catalog on September 7, 2021
TRA3355R, Traxxas VXL-3S Brushless ESC (Waterproof)
This is the Traxxas VXL-3S Brushless Electronic Speed Control. This Speed Control simplifies brushless technology with easy, built-in profiles and intuitive programming. Tri-mode operation auto detects the motor type for brushed, sensored, or sensorless brushless motors. The VXL-3s uses advanced circuit design that allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. It sets up, operates, and programs just like the Traxxas XL-5 family of ESCs so there's no tricky new procedures to learn. Traxxas exclusive patented Training Mode is also included to limit full throttle to 50% for young or inexperienced drivers. For the most advanced users, the VXL-3s is equipped with two-stage low voltage detection to allow LiPo battery use. The VXL-3s is manufactured by Traxxas to ensure the highest level of quality and support and is backed by the Traxxas Lifetime Electronics Warranty.
Features:
The VXL-3s auto-detects the motor type for brushless and sensored brushless motors.
Patented Traxxas High-Current Connector eliminates a common bottleneck and maintains pure, unrestricted power flow from the battery to the brushless power system.
Built-in two-stage low voltage detection for Lithium Polymer (LiPo) battery use provides a clear signal to the driver that the battery pack is nearing its minimum voltage threshold.
Widest range of battery options ranging from 4-cell NiMH or NiCad packs all the way up to 3S LiPo battery packs (11.1 volt)
The patented Training Mode™ is an exclusive Traxxas feature that reduces the overall power output of the VXL-3s by 50%, making it easier for new or younger drivers to control their model. When they're ready, simply change profiles to unleash full-throttle action.
Advanced circuit design allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. There's no need for additional sensor wiring and hardware complexity.
The EZ-Set® push-button setup operates and programs just like other Traxxas speed controls such as the XL-5. This eliminates the need to learn a new set of procedures.
The VXL-3s is programmable with three drive profiles:
Sport Mode – Fwd / Brake / Rev
Race Mode – Fwd / Brake
Training Mode**™ – 50% Fwd / Brake / 50% Rev
More Features:
Multi-color LED provides clear feedback
Since the VXL-3s allows experimentation with many kinds of motors, it is equipped with numerous failsafe features to help protect against common mishaps that can cause other systems to fail.
Two-stage thermal shutdown protection protects the VXL-3s from overheating.
Locked Rotor Protection™ prevents system damage by cutting power if the vehicle is stuck or the motor is bound.
Sensor Phase Detection™ protects against improperly wiring aftermarket sensored motors.
Sensored Motor Backup protection causes the VXL-3s to switch to sensorless operation if a motor sensor fails or sensor wires become disconnected. Sensored motors can be used without connecting the sensor wires to the sensor port on the ESC.
Battery Over-Voltage Protection™ causes the ESC to go into failsafe mode if the maximum input voltage is exceeded.
Water resistant case design uses rubber seals and o-rings to protect against damage caused by water and moisture.
Micro-fin aluminum heatsink dissipates heat.
The built-in auxiliary fan output powers a snap-on accessory fan for increased cooling capacity during extreme use. A handy clasp on the speed control case keeps the wire neatly in place until you are ready to use it.
MOSFET design provides high-current output (320 amp peak) with incredibly low resistance (.00075 (ohm)).
Gold plated 3.5mm bullet connectors on 12-gauge Maxx® Cable flow full power to the motor without performance strangling resistance.
Specifications:
Input Voltage: NiCad/NiMH 4-9 Cells (4.8 to 10.8 Volts DC);
LiPo 2-3 Cells: (7.4 to 11.1 Volts DC)
Case Size: 39mmW x 55mmD x 33mmH
Weight: 90 grams
Motor Limit (Brushed/Brushless): No motor limit
On Resistance Forward: 0.00075 Ohms
On Resistance Reverse: 0.00075 Ohms
Peak Current - Forward: 320A
Peak Current - Reverse: 320A
Braking Current: 320A
Continuous Current: 200A
BEC Voltage: 6.0 V
BEC Current: 2.5A (with 6-cell NiMH)
Power Wire: 12-Gauge Maxx® Cable
Input Harness Wire: 26 Gauge / 100mm
Transistor Type: MOSFET
Low Voltage Detection: 2-Stage indicators, switchable (on or off)
Thermal Protection: 2-Stage thermal shutdown
Single-Button Setup: Yes, Traxxas EZ-Set®
Battery Input Connector : Traxxas High-Current Connector
Motor Types (Autodetect): Brushed, brushless, sensored brushless
Ports: RX Input, motor sensor, auxiliary fan
Documents and Resources for TRA3355R
Traxxas VXL-3S Waterproof ESC Manual
This product was added to our catalog on April 12, 2021
SAVSH0263MGP, Savox SH-0263MGP Micro Metal Gear Digital Servo
The Savox SH-0263MGP Metal Gear Digital Micro Servo is quick and built tough. It's small size and superb overall performance makes this servo ideal for applications such as 450 size helicopters.
NOTE: "Plus" models feature Soft Start and Sanwa SSR Compatibility
Features:
Metal gear train ensures durability and longevity.
Aluminum middle case allows for cooler operating temperatures.
Ideal for small planes, and 450 size helicopters.
Dual ball bearing support.
Specifications:
Torque:
@4.8v: 1.8kg/25.0oz-in
@6.0v: 2.2kg/30.6oz-in
Speed:
@4.8v: 0.13 sec/60 deg
@6.0v: 0.10 sec/60 deg
Dimensions (LxWxH) 22.8 x 12.0 x 25.4mm
Weight: 15.0g
Includes:
(1) SH-0263MGP Micro Metal Gear Digital Servo
Plastic Servo Arms and Hardware
This product was added to our catalog on March 23, 2023
PTK-5042, ProTek RC Sheathed T-Style Plug (2 Male)
These ProTek R/C Sheathed T-Style Connectors are compatible with any standard generic T-Style plug, as well as Deans Ultra Plugs. These connectors feature a plastic protective sheath that snap onto the back of the connector concealing the solder joint.
Typical t-style plugs use shrink tubing which works fine, but provides a one-time solution. Using the sheath, you can snap it on or off to make any connector changes or modification, as well as create a sleek and professional look.
Package includes two male plugs and two protective sheaths.
Features:
T-Style connectors
60A max current
Sheathed backing
Concealed solder joint
Labeled polarity
Professional looks
Specifications:
Rated Current： 36A
Max Current: 60A
Internal Resistance: 0.4mΩ
Net Weight (pair): 5.6g
Recommended Wire: 12AWG
Pulling Force: 25N
Recommended Use: 1000 times
Rated Temperature： -20°C - 120°C (-4°F - 248°F)
Material： Brass and gold plated
This product was added to our catalog on December 16, 2021
SPMXCA508, Spektrum RC 4" IC5 Battery to IC3 Device SMART Battery Adapter Cable
The Spektrum 4" IC5 Battery to IC3 Device SMART Battery Adapter Cable allows you to connect batteries with an IC3 or EC3 connector to an IC5 connector equipped Spektrum Smart device. This adapter features a male bullet/female housing IC3 connector, combined with a female bullet/male housing IC5 connector, that is joined with 4"/100mm long 12awg wire.
This product was added to our catalog on May 31, 2021
SPMXCA503, Spektrum RC IC5 Device Connector (2) (Male)
Spektrum IC5 Device Connectors, including two Male IC5 Connectors.
This product was added to our catalog on December 31, 2021
SPMXSEM0501, Spektrum RC Firma Brushless Motor/ESC 2-in-1 Combo (6000Kv)
This is the Spektrum RC Firma Brushless Motor/ESC 2-in-1 Combo. This powerful brushless combo is an excellent drop in brushless system for Mini vehicles such as the Losi Mini-T, Mini-B and Mini JRX2. This system contains a high-torque and high speed 6000kv brushless sensorless motor that is designed for bashing and sport racing applications. The motor features the same basic dimensions and mounting patterns as industry-standard, 1/16 to 1/18, 280-size brushed motors, making it easy to install and setup. These motors also offer high performance over a longer lifetime with little to no maintenance.
Features:
Drop-in brushless upgrade for Losi Mini-T, Mini-B and Mini JRX2
Integrated 20 amp ESC
2-in-1 design reduces space requirements
EC2 connector that is compatible with popular battery types used in 1/18th scale models
Perfect upgrade for brushed 280 motors with the same diameter
Industry standard mounting hole patterns
High torque and high RPM 6000kv Brushless Sensorless motor
Counter-clockwise operation only
Easy programming via one-button interface
High-quality construction with ball bearings
Hardened steel 2mm motor shaft
Low maintenance design
Easy installation
Specifications:
Input Voltage: 2S LiPo
RPM/Volt (Kv): 6000
Motor Type: Brushless
Maximum Burst Current: 40A
Maximum Continuous Current: 20A
Connector Type: EC2
BEC: Yes
BEC Type: Switching
BEC Continuous Current: 1A
Motor Design: Inrunner
Reverse: Yes
Forward: Yes
Auto Cutoff: Yes
Overload Protection: Yes
Shaft Diameter: 0.07" (2mm)
Outer Diameter: 0.94" (24mm)
Product Length: 1.41" (36mm)
Includes:
(1) Firma Brushless Motor/ESC 2-in-1 Combo (6000Kv)
(1) Product Manual
This product was added to our catalog on December 12, 2022
TRA3070R, Traxxas 4S Male ESC Connector
Traxxas 4S Male ESC Connector. This optional connector is designed to allow for single 4S LiPo compatibility to the Traxxas VXL-6S ESC. Package includes two connectors and four terminals.NOTE:
This is for Traxxas ESC use ONLY.
Requires Traxxas TRA8527 jumper for unused battery lead.
This product was added to our catalog on September 7, 2021
TRA2255, Traxxas 400 High Torque Metal Gear Waterproof Brushless Servo (Red) (High Voltage)
The Traxxas 400 High Torque Metal Gear Waterproof Brushless Servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting edge brushless motor provides 400 ounce-inches of torque for extreme applications.* The High-Torque 400 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit.
The Power to Perform
With over 3 times more torque than the standard #2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single #2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.
Waterproof Not "Water Resistant"
Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.
For TRX-4 Installation
The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit (TRA2262) and a steel servo horn (TRA8247X) is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.
NOTE:
*Compatible with most Traxxas 1/10 scale electric models
Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn
Compatible with Traxxas nitro models using rechargeable 5-cell battery packs
Not recommended for X-Maxx
Features:
Factory fit for drop-in installation into Traxxas Models
Fully waterproof, not “water resistant”
Compatible with Traxxas Stability Management™ (TSM)
400 oz-in torque at 6.0V
0.15 sec/60° at 6.0V
Metal gears
Dual ball bearings
Brushless motor technology
Aluminum center case
Specifications:
Motor Type: Brushless
Operating Voltage: 6.0 - 7.4V DC
Speed: 0.15 sec/60° at 6.0V
Torque: 400 oz-in at 6.0V
Weight: 64g
Gears: Metal
Output Spline: 25T
Case: Plastic top/bottom, anodized aluminum center
Controller: Digital
This product was added to our catalog on April 12, 2021
PTK-5070, ProTek RC QS8 Anti-Spark Connector (1 Male/1 Female)
ProTek RC QS8 Anti-Spark Connectors are a high quality, high current connector that is perfect for high voltage applications. Not only is the connector capable of handling spikes in excess of 300 amps, the design provides an anti-spark connection that eliminates the dreaded POP when you plug in the battery helping to extend the life of the connector. High voltage bashers, speed run enthusiasts and pilots of all disciplines can benefit from this advanced connector technology.
The QS8 connector features 8mm bullets that can accommodate wire up to 6awg, inside a heavy duty nylon/fiber composite housing. Plus, an included plastic wire cap covers the soldered connection and eliminates the need for heat shrink to create an incredibly clean installation that works well, looks great and is easy to manage. NOTE: T-style connector shown in photos is for size reference only, and is not included.
Features:
Anti-Spark Technology Increases Lifespan of Connector
110A Constant/300A Peak Current Rating
8.0mm Gold Plated Brass Bullet
Great for all High Voltage Applications
Nylon/Fiber Composite Housing
Package Includes One Female Connector, One Male Connector & End Cap
Specifications:
Connector Diameter: 8.00mm
Metal Material: Gold Plated Brass
Plastic Material: Fiber Nylon Comp
Flame retardant rating: UL94 V0
Temperature Range: 200C Max
Rated Voltage: 600V DC
Continuous Current: 110A
Peak Current: 300A+
Weight: 41g (Male+Female Set)
Total Length: Approx 70mm (Male & Female w/End Cap)
Width: 29.5mm
Max Wire Gauge: 6awg
Includes:
(1) QS8 Female Anti-Spark Connector
(1) QS8 Male Antispark connector
(2) Wire Caps
NOTE: T-style connector shown in photos is for size reference only, and is not included.
This product was added to our catalog on December 16, 2021
CSE011-0135-00, Castle Creations B Link Bluetooth Adapter
The Castle Creations B Link Bluetooth Adapter gives you access to powerful Castle Link ESC tuning features right from your iOS or Android smartphone! Castle Link is an essential component of customization for all Castle ESCs. While the controllers are plug and play, the benefits of fine tuning your Castle ESC through the Castle Link Programming Suite have only reinforced the sophistication and value of the Castle product line. Not only do you get the ability to adjust many variables to enhance your experience, you have the assurance that firmware updates for future features and improvements for your controller are provided at no cost to you.
Discover just how easily and quickly you can reign in tuning with the release of the Castle B•LINK BLUETOOTH ADAPTER, which will allow most Castle Link compatible products to be programmed via Bluetooth enabled mobile devices using the free application, with firmware updating to be added soon.
CASTLE LINK APP FEATURES:The Castle Link App contains all of the same tuning options as the Castle Link USB Programming Suite used on a Windows compatible PC, now with even greater flexibility.
NOTE:
All current Castle Creations ESCs, many older units and the BEC 2.0 and BEC Pro are supported, for a complete listing of compatible ESCs and accessories please view the PDF file in the resources tab above.
App available for free at the Apple App Store and Google Play.
Features:
WIRELESS BLUETOOTH COMMUNICATION allows you to interface with most Castle Link compatible ESCs and accessories to change parameters and update firmware.
DATA LOG VIEWING allows the user to view and download data logs wirelessly, giving you the information needed to fine tune your setup.
COMPACT AND LIGHTWEIGHT at 1.20" x .81" x .25" (30.48mm x 20.55mm x 6.55mm) and 0.23oz (6.62g), it can be installed in the vehicle or airframe without significantly increasing model weight.
CONVENIENT WATERPROOF DESIGN allows you to quickly adjust settings in the field without disconnecting or disassembling the model. It can stay installed in the model or be easily swapped between models.
FREE APP DOWNLOAD is readily available in the Apple App Store or Google Play. Once downloaded it does not require a data connection so it can be used in the most remote of areas and won’t use data.
EASY TO USE application can be used with multiple B-Link Bluetooth Adapters or can store model information and allow you to use one adapter on multiple models.
PASSCODE PROTECTED with (user-selectable) 4-digit code to prevent unwanted tampering with your settings.
SYNC information between multiple devices by creating a free account (requires internet connection to sync database).
Specifications:
Input Voltage: Minimum: 4.5V - Maximum: 13V
Max Continuous Current: 10A
Maximum Burst Current: 20A
Dimensions (with wires): 7.25" x 0.81" x 0.27" (184.15mm x 20.55mm x 0.27"mm)
Dimensions (w/o wires): 1.20" x 0.81" x 0.27" (30.48mm x 20.55mm x 0.27"mm)
Weight: 6.62gm / 0.015lbs
Needed for Operation: Castle Link App found at Apple Store or Google Play.
This product was added to our catalog on May 1, 2021
TRA8247X, Traxxas TRX-4 Metal Steering Servo Horn
Traxxas TRX-4 Metal Steering Servo Horn. This is the optional sintered metal servo horn. Package includes one horn and one 3x14 button head screw.
This servo horn is compatible with any standard servo featuring a 25 tooth spline.
This product was added to our catalog on September 7, 2021
ECP-115T, EcoPower WP115T Low Profile High Torque Waterproof Metal Gear Servo (High Voltage)
The EcoPower WP115T Low Profile High Torque Waterproof Metal Gear Servo, is an excellent option when you need an affordable, high voltage low profile servo. The EcoPower 115T servo has been designed for 1/10 2WD Buggies, 1/10 Drift Cars or as a Shift/Dig servo. The servo features smooth ball bearing control and a durable, metal gear drivetrain. Package includes one servo, one servo mount set, five molded servo horns and hardware.
Features:
Affordable option for 2WD applications or as a shift/dig servo
178 oz-in of torque @7..4V, and .08/60° sec transit speed
Waterproof
Digital circuitry
Cored DC motor
All metal gear drivetrain
Includes molded star, 4 way, dual, single and round arm type servo horns and mounting hardware
1 Year warranty against manufacturer defects*
*NOTE: Warranty does not cover stripped gears or damage caused by abuse.
Servo Model
115T Low Profile
Recommended Application
1/10 On-Road & Off-Road
Waterproof
Yes
Operating Voltage
4.8V - 7.4V
Operating Speed @ 4.8V
0.13/60° sec
Operating Speed @ 6.0V
0.10/60° sec
Operating Speed @ 7.4V
0.08/60° sec
Dynamic Torque @ 4.8V
108 oz-in (4.4 kg-cm)
Dynamic Torque @ 6.0V
127 oz-in (6.4 kg-cm)
Dynamic Torque @ 7.4V
178 oz-in (12.8 kg-cm)
Motor Type
Cored DC
Output Shaft
25 Tooth
Gears
Metal
Weight
44.5g
Dimensions
41.2x20.0x32.8mm (LxWxH)
NOTE: Be sure to set your End Point Adjustments when using this servo to ensure long life and performance.
Compatibility
Kyosho Fazer
Losi 22 1.0
Losi 22 2.0
Losi 22 3.0
Losi 22 3.0 SPEC-Racer
MST FXX 2.0 S
MST RMX 2.0 S
Tamiya TT-01
Tamiya TT-02
Team Associated DR10
Team Associated DR10M
Team Associated RC10 B4 Original
Team Associated RC10 B5 Original
Team Associated RC10 B5M
Team Associated RC10 B5M Factory Lite
Team Associated RC10B6 Original
Team Associated RC10B6.1
Team Associated RC10B6.1 Factory Lite
Team Associated RC10B6.1D
Team Associated RC10B6.2
Team Associated RC10B6.2D
Team Associated RC10B6.3
Team Associated RC10B6.3D
Team Associated RC10B6.4
Team Associated RC10B6.4D
Team Associated RC10B6D
Traxxas Bandit
Yokomo YD-2
This product was added to our catalog on January 3, 2023
TRA3478, Traxxas Sledge Cooling Fan Wiring Harness
Traxxas Sledge Cooling Fan Wiring Harness. This replacement wiring harness is intended for the Traxxas Sledge equipped with the TRA3475 Cooling Fan. Package includes one wiring harness and one zip-tie.
This product was added to our catalog on August 1, 2022
PTK-5350, ProTek RC Heavy Duty EC5 Charge Lead Adapter (Male EC5 to Female XT60)
The ProTek R/C Heavy Duty EC5 Charge Lead Adapter features a "male" EC5 connector with male bullets, connected to a female XT60. Thanks to the 4 inch long 14awg wire, this adapter can be used for heavy duty charging and can handle charge rates more than 20 amps. This adapter can also be used for ESC to battery connections in some applications, allowing you to connect your EC5 equipped battery to an ESC with an XT60.
This product was added to our catalog on December 16, 2021
HWA30112003, Hobbywing Xerun XR10 Justock G3 1/10 Sensored Brushless ESC
The Hobbywing XERUN XR10 Justock G3 1/10 Sensored Brushless ESC is the next level in zero timing spec racing. The timing in this ESC has been fixed to a permanent 0° to comply with stock class racing. Package includes one Justock ESC.
Features:
Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system
Programmable via OTA Bluetooth module or 3in1 program box
Built-in capacitor module eliminates the need for external capacitors and unwanted space
RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box)
Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing
Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V
Calibration or preforming a factory-reset can be achieved by using this SET button. Simple and easy to use
Supports both CCW (counterclockwise) and CW (clockwise) motor directions
Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection
Supports ESC firmware upgrades
User-friendly and convenient for set-up
Specifications:
Continuous Current: 60A
Burst Current: 380A
Battery: 2S Lipo (Only 2S)
Built-in BEC: 6V/7.4V @ 4A(Switch-mode)
ESC programming: Independent programming port
Motor Supported: Sensor and sensorless brushless motor
Motor Limit: 10.5T 3650 Motor
Application: 1/10, 1/12 On-road and Off-road
Cooling Fan: Powered by BEC
Size: 40.9x33.9x32.1mm (LxWxH)
Weight: 75.4g (Including weight of wire)
This product was added to our catalog on May 3, 2023
TRA3063X, Traxxas Series Battery Wire Harness (NiMH Only)
Traxxas Series Battery Wire Harness. Use the series harness to combine battery voltage and unlock the 50+mph speed potential of your model. Dual-battery operation requires attention to precautions outlined in the model's owners manual. Follow all precautions to assure peak performance and reliability of your model and batteries. Traxxas parallel and series Y-harnesses are for use with 2/3A battery packs only.
This product was added to our catalog on May 7, 2021
TRA2065A, Traxxas Servo, Sub-Micro, Waterproof
Replacement part for these models:
1/18 LaTrax® Desert Prerunner
1/18 LaTrax® Rally
1/18 LaTrax® Teton®
Summit
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-4® 2021 Ford® Bronco
TRX-4® Mercedes-Benz® G 500® 4X4²
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
TRX-6® Mercedes-Benz® G 63® AMG 6X6
Accessory part for these models:
TRX-4® Equipped with Traxx®
TRX-4® Sport Unassembled Kit
TRX-4® Sport
This product was added to our catalog on September 7, 2021
SPMXCA506, Spektrum RC IC5 Battery Series Harness (4"/100mm)
Spektrum IC5 Battery Series Harness with 4" 13AWG wire. For use with the Spektrum Smart Battery Charger System.
This product was added to our catalog on December 27, 2021
ARAC9424, Arrma Charge Adapter (Female Deans to Male XT90)
This XT90 Male to Female T-Plug Charging Adaptor allows you to charge your XT90 equipped battery pack using a charger that has a T-Plug output.
This product was added to our catalog on February 14, 2021
