By Scale
PROTOform PRM157140, Protoform Chevrolet Corvette C7 1/10 Pro-Mod Short Course Drag Car Body (Clear)
PRM157140, Protoform Chevrolet Corvette C7 1/10 Pro-Mod Short Course Drag Car Body (Clear) The Protoform Clear Chevrolet Corvette C7 Pro-Mod Short Course Drag Car Body represents Protoforms long heritage with drag racing. This is Protoforms first body dedicated to the fast-growing SC Drag Racing class and will transform your Slash 2WD into a scale 1/4-mile beast with realistic details to give your SC drag car a super unique, race-inspired look. The C7 Pro-Mod Corvette body is a clean and convenient one piece design that allows any enthusiast to pick and apply their own unique paint scheme. Trim, mask and get creative with this slick drag body. Note: To create a more scale look, the body is designed with a narrower track width than a traditional SC body and will require some modifications to your 2wd Slash® in order to fit correctly. Here is the list of modifications needed to fit: Pro-Line Extended Body Mounts for Slash 2wd Tech tip: install the front mounts upside down to get the nose of the body as low as possible! Traxxas® Bandit® Front Arms - TRA2531X Traxxas® Bandit® Rear Arms - TRA2750R Traxxas® Bandit® Front Caster Blocks - TRA2432 Traxxas® Bandit® Steering Blocks - TRA3636 Traxxas® Bandit® Axles - TRA2437 Traxxas® King Pins - TRA3740 Traxxas® Front Camber Turnbuckles - TRA2444 Traxxas® Rear Turnbuckles - TRA2443 Traxxas® Toe Link Turnbuckles - TRA2445 Shorten Rear Drive Shafts Remove Front Bumper Features: Modern, sleek Pro-Mod styling Incredible scale details Officially-licensed by General Motors 1-piece design Made in the USA from durable polycarbonate Specifications: Length: 25.5" (647mm) Front Width: 11.125" (282mm) Height: 11.25" (285mm) Wheelbase: 13.2" (335mm) Compatible with: Slash® 2wd Modified into a narrow Pro-Mod Drag Car Includes: (1) Clear Chevy® Corvette™ C7 Pro-Mod Body (1) Detailed Decal sheet Paint-then-peel over spray film & window masks This product was added to our catalog on August 28, 2021
$50.00
McAllister Racing MR326, McAllister Racing "EL Jefe" NextGen Camaro 1/18th
MR326, "EL Jefe" NextGen Camaro 1/18th Little Cars for BIG FUN! The “EL Jefe” is a 1/18th scale NextGen Camaro body designed specifically for the Traxxas LaTrax Rally 1/18 4wd. We nicknamed this body "EL Jefe" aka "The Boss" because this spicy little guy will be taking command on the track, in the driveway, or across your living room! Included with the body: Easy to follow cut lines, pre-cut decal detail sheet, pre-cut window masks, spoiler, and hardware. The last picture is how the mounts need to be set up to best suit the body. This body will require the chassis to be used in the short wheelbase to match perfectly with the wheel wells. Made in the USA with genuine .030 American Made Lexan. This product was added to our catalog on June 1, 2023
$29.99
McAllister Racing MR286, McAllister Racing 1969 Mustang VTA
MR286, 1969 Mustang VTA 1/10th scale, 8" wide (200mm), 10" wheelbase (255mm). Window mask, overspray film, and Detail Decals included with body. Note: This is a clear, unpainted body only. Intended for Pan Cars and Touring Cars. This product was added to our catalog on June 1, 2023
$29.99
Traxxas TRA6811R, Traxxas Slash 4X4 Heavy Duty Body (Clear)
TRA6811R, Traxxas Slash 4X4 Heavy Duty Body (Clear) This is an optional Traxxas Slash 4X4 Clear Heavy Duty Body, intended for use with the Traxxas Slash 4X4 and Traxxas Slayer short course trucks. This clear body is a blank canvas, ready for you to add your own unique paint scheme, and has been factory trimmed. This body includes window masks and decals. This product was added to our catalog on September 7, 2021
$45.00
PROTOform PRM1543-30, Protoform Cadillac ATS-V.R Touring Car Body (Clear) (190mm)
PRM1543-30, Protoform Cadillac ATS-V.R Touring Car Body (Clear) (190mm) This is the 190mm Protoform Cadillac ATS-V.R Clear Touring Car Body. Cadillac Racing stormed back into the motorsports spotlight in 2015 with their factory-works ATS-V.R race car, the third generation of V-Series race cars. Built to international FIA GT3 specifications, this pedigree allows it to potentially run in more than 30 different GT series around the world. The ATS-V.R has proven a success with top drivers Johnny O’Connell and Andy Pilgrim at the wheel, scoring multiple overall wins and pole positions in the World Challenge series. PROTOform is proud to bring the racing heritage of Cadillac back to 1/10 190mm Touring Cars with our officially-licensed rendition of the Cadillac ATS-V.R. With every detail of the full-scale race car captured and an extensive decal sheet, racers will appreciate the ultra-realistic looks for racing in classes such as USGT, GT10, and Spec Grand Touring. This 2-door coupe race body is formed from genuine .030” lexan and includes injection-molded wing struts to support a unique rear wing design. The wing features 2 different levels of trim, a 10mm vertical section for sanctioned USGT racing and a 20mm upper laid-back trim for club racing, making the PROTOform ATS-V.R suitable to any kind of GT-class rules. As always, wing mounting hardware, and paint-then-peel overspray film are included. Features: Made with Genuine GE .030 lexan Replica body of the factory-works Cadillac Racing GT3-spec race car Molded wing struts and dual-trim wing design Officially-licensed by General Motors Proudly Made in the USA Specifications: Length: 17.5" (445mm) Width: 7.63" (194mm) Height: 4.29 (109mm) Wheelbase: 10.2" (258mm) Includes: Clear Cadillac ATS-V.R body (2) Molded nylon wing struts Mounting hardware Extensive decal sheet Paint-then-peel over spray film, & window masks This product was added to our catalog on July 16, 2021
$35.99
McAllister Racing MR707, McAllister Racing Foam Car Stand #707
MR707, McAllister Foam Car Stand #707 -Foam car stand embossed with the classic McAllister flying M. -Lightweight and durable foam that will not be damaged by tire prep or most other RC products. -Measures: 7 x 4 x 1.5" This product was added to our catalog on June 1, 2023
$13.99
Traxxas TRA6811, Traxxas Slash 4X4 Body (Clear)
TRA6811, Traxxas Slash 4X4 Body (Clear) This is a replacement Traxxas Slash 4X4 Body, and will also work with the Traxxas Slayer. This body is clear and requires painting, as well as final trimming. This body includes window masks and decals. This product was added to our catalog on September 7, 2021
$37.00
McAllister Racing MR295, McAllister Racing 1970 Pontiac Trans Am VTA
MR295, 1970 Pontiac Trans Am VTA 1/10th scale, 8" wide (200mm), 10" wheelbase (255mm). Window mask, overspray film, and Detail Decals included with body. This is a clear, unpainted body only. Intended for Pan Cars and Touring Cars.Genuine Made in USA Lexan. This product was added to our catalog on June 1, 2023
$29.99
PROTOform PRM158500, 1/10 Nissan GT-R R35 Clr Body: Losi 22S Drag Car
PRM158500, 1/10 Nissan GT-R R35 Clr Body: Losi 22S Drag Car
$46.99
Traxxas TRA6717, Traxxas Rustler 4X4 Body (Clear)
TRA6717, Traxxas Rustler 4X4 Body (Clear) This product was added to our catalog on September 7, 2021
$27.85
McAllister Racing MR304, McAllister Racing 1970 Camaro Trans Am VTA
MR304, McAllister Racing 1970 Camaro Trans Am VTA 1/10th scale, 8" wide (200mm), 10" wheelbase (255mm). Detail Decals. window mask and overspray film included with body. This is a clear, unpainted body only. Intended for Pan Cars and Touring Cars. Genuine Made in USA Lexan. This product was added to our catalog on June 1, 2023
$29.99
PROTOform PRM153530, Protoform 1971 Pontiac Firebird Trans Am Vintage Racing Body (Clear)
PRM153530, Protoform 1971 Pontiac Firebird Trans Am Vintage Racing Body (Clear) This is the Protoform 1971 Pontiac Firebird Trans Am VTA Body. Vintage Trams Am class racing has taken off in the past few years as an opportunity for racers to break in to on-road R/C, providing close racing, scale realism and warm and fuzzy feelings of the good ol’ days of American road course racing. The Pontiac Firebird Trans Am was one of the signature cars of the former full-scale series, and now PROTOform has captured its trademark look in the release of the 1971 model for your VTA class R/C Touring Car. From its aggressive front “beak”, to the duck tail-style rear spoiler, to the mother of all macho items, – the shaker hood scoop – no detail was overlooked. The front nose cone is molded separately, and when mounted with the 2mm screws and/or liquid adhesive, it becomes an integral part of the body. Because this area of a race body is the most prone to racing wear and tear, a second nose is included. This officially licensed product is produced in genuine .030 Lexan® material and meets all VTA Class rules. The clear body comes with protective overspray film, window masks, detailed decal sheet that lets you choose to style your Firebird as a full-blown race car, or head-turning street machine. Features: Made with Genuine GE .030 lexan Fits touring cars set up for Vintage Trans Am Rules Exceptional scale detail and realism Fully Licensed by General Motors Specifications: Length: 17.87” (454mm) Width (front wheelwells): 7.8” (198mm) Width (rear wheelwells): 8.15” (207mm) Height: 4.17” (106mm) Wheelbase: 10.24” (260mm) This product was added to our catalog on May 3, 2023
$35.99
PROTOform PRM157700, Corvette C8 Clear Body Felony & Infraction
PRM157700, Corvette C8 Clear Body Felony & Infraction Product Details Key Features Incredible Scale Details Officially Licensed by General Motors Custom Front Splitter & Wing Designs Made in the USA In The Box Clear Corvette™ C8 Body Front Splitter Rear Wing Wing Mounting Hardware Extensive Decal Sheet Instruction Sheet Paint-then-peel Over Spray Film and Window Masks Quick Links Introduction PROTOform is now proud to bring one of the most anticipated cars Chevrolet® has ever built to the 1:7 scale ARRMA® Street Bash line of vehicles with the release of the Corvette™ C8 body for Felony™ & Infraction™. Features Incredible Scale Details Officially Licensed by General Motors Custom Front Splitter & Wing Designs Made in the USA What's Included Clear Corvette™ C8 Body Front Splitter Rear Wing Wing Mounting Hardware Extensive Decal Sheet Instruction Sheet Paint-then-peel Over Spray Film and Window Masks Overview The officially licensed body is the ultimate aerodynamic upgrade to the popular Felony™ platform, whether you are making speed runs in the back roads or drifting in the parking lot. All the exceptional details of its 1:1 counterpart including aggressive cab-forward design, sculpted side doors, and vents are captured using the latest in 3D CAD and 5-axis milling technology. The extensive decal sheet lets you deck out your C8 with Corvette™ badges, windshield headers, "Jake" skulls, and USA flags. Also included are a custom add-on front splitter and rear wing to complete the super-scale look. The C8 is formed from durable 1.5mm thick high-quality polycarbonate with paint-then-peel overspray film. This body was designed with wider rear fenders as a direct fit for the Felony™ to clear the 53/107 tires. It will work with Infraction™ rear tires, but to get the optimal look and fit, you can optionally choose to either widen the rear of your Infraction™ chassis with stock rear tires or use Felony™ rear tires with modifications to the rear gear ratio. See the fits section below for the list of parts needed for these modifications. General Motors trademarks used under license to Pro-Line.Please note: All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only. ©2020 Pro-Line Racing. ARRMA®, Felony™, and Infraction™ are trademarks or registered trademarks of Horizon Hobby®, LLC. All other trademarks, service marks and logos are property of their respective owners. Fits: ARRMA® Felony™ ARRMA® Infraction™ with: STOCK REAR TIRES - PARTS LIST Rear Hubs (2pcs): AR330404 Axles (8x45mm) (2pcs): AR310591 Hexes (16.5mm) (2pcs): AR310484 FELONY™ REAR TIRES - PARTS LIST (V1 INFRACTION™) 53/107 2.9 Tires (Pair): ARA550073 Front Input Shaft Cup (Safe-D): ARA310977 Front Input Shaft Cup Sleeve (4pcs): ARA310976 Front Main Input Gear 15T GP5: ARA311016 Front Main Diff Gear 42T GP5: ARA311017 Rear Input Shaft Cup (SAFE-D): ARA310977 Rear Input Shaft Cup Sleeve (4pcs): ARA310976 Rear Main Input Gear 14T GP6: ARA311018 Rear Main Diff Gear 45T GP6: ARA311019 FELONY™ REAR TIRES - PARTS LIST (V2 INFRACTION™) 53/107 2.9 Tires (Pair): ARA550073 Rear Main Input Gear 14T GP6: ARA311018 Rear Main Diff Gear 45T GP6: ARA311019 Length: 27.25" (892mm) Width Front: 12.3" (312mm) Width Rear: 13.2" (335mm) Height: 10.1" (257mm) Wheelbase: 7.75" (196mm) Product Specifications Body Style 2 door coupe Material Polycarbonate Product Height 7.75" (197 mm) Product Length 27.25" (692 mm) Scale 1/7 Vehicle Type On-Road Wheelbase 10.1" (257 mm)
$106.24$84.99
McAllister Racing MR305, McAllister Racing 1968 Cougar Trans Am VTA
MR305, 1968 Cougar Trans Am VTA 1/10th scale, 8" wide (200mm), 10" wheelbase (255mm). Window mask, overspray film, and Detail Decals included with body. This is a clear, unpainted body only. Intended for Pan Cars and Touring Cars. Genuine Made in USA Lexan. This product was added to our catalog on June 1, 2023
$29.99
McAllister Racing MR324, McAllister Racing Magnolia Late Model 1/18th
MR324, Magnolia Late Model 1/18th Little Cars for BIG FUN! The “Magnolia” is a 1/18th scale Dirt Late Model body designed specifically for the Traxxas LaTrax Rally 1/18 4wd. Named after an iconic track known as “The Mag” located in Columbus MS, this little firecracker will not disappoint. It comes with pre-marked mounting holes, easy to follow cut lines, and pre cut window masks. The last picture is how the mounts need to be set up to best suit the body. *Body will come clear with overspray film, and window masks. Made in the USA with genuine .030 American Made Lexan. This product was added to our catalog on June 1, 2023
$29.99
Yokomo YOKSD-GRA90BA, Yokomo PANDEM GR Supra Drift Body Set (Clear)
YOKSD-GRA90BA, Yokomo PANDEM GR Supra Drift Body Set (Clear) The Yokomo PANDEM GR Supra Drift Body Set faithfully replicates the aggressive silhouette of a modified GR Supra. By taking the incredibly refined GR Supra platform, and adding the PANDEM aero body kit, this body is a testament to Yokomo's desire to stay on the cutting edge of the drift market. Yokomo's original molding technology faithfully molds the PANDEM aero kit with the front grille, rear underskirt, and deep side constrictions in one single piece - making it easy to add a custom wide body look to your drift build. The attractive lines of the beautifully curved Supra, combined with the accurate addition of the PANDEM body kit gives this body a realistic finish that you wouldn't expect from a RC car body. NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted. This product was added to our catalog on June 1, 2023
$65.99
Traxxas TRA9712, Traxxas TRX-4M Land Rover Defender Complete Unassembled Body (White)
TRA9712, Traxxas TRX-4M Land Rover Defender Complete Unassembled Body (White) Body, Land Rover® Defender®, complete (unassembled) (white, requires painting) (includes grille, side mirrors, door handles, fender flares, fuel canisters, jack, spare tire mount, & clipless mounting) (requires #9734 front & rear bumpers) This item was added to our catalog March 26, 2023
$44.99
PROTOform PRM155840, Protoform 1968 Ford Mustang Vintage Trans-Am Racing Body (Clear)
PRM155840, Protoform 1968 Ford Mustang Vintage Trans-Am Racing Body (Clear) This is the Protoform 1968 Ford Mustang Vintage Trans-Am Racing Body. The Mustang nameplate has long been synonymous with American muscle car performance, and now Protoform is proud to add to their Vintage Trans-Am racing body lineup with our rendition of the 1968 Ford Mustang. From the signature fastback roofline, to the aggressive stance, to the hood and pillar vents, every detail of the iconic pony car has been captured for an exceptionally scale look. Once again we’ve used the latest molding technology to form this body from single piece of polycarbonate while still maintaining realistic front and rear undercuts. No more add-on front or rear clips to assemble. This officially-licensed product is meets all VTA Class rules and includes a detailed decal sheet, protective overspray film and window masks. This product was added to our catalog on May 3, 2023
$35.99
McAllister Racing MR315, McAllister Racing AAR "Cuda" VTA
MR315, McAllister Racing AAR "Cuda" VTA 1/10th scale, 8" wide (200mm), 10" wheelbase (255mm). Window mask, overspray film, and Detail Decals included with body. Note: This is a clear, unpainted body only. Intended for Pan Cars and Touring Cars. Genuine Made in USA Lexan. This product was added to our catalog on June 1, 2023
$29.99
PROTOform PRM152600, Protoform J71 Vintage Racing Body (Clear)
PRM152600, Protoform J71 Vintage Racing Body (Clear) This is the Protoform J71 Clear Body, intended for use in the VTA class. The addition of the J71 to the VTA scene will add new excitement to an already diverse class of racing, and is guaranteed to shake things up! The J71 features all the unique styling cues of the original car, as well as a molded in rear spoiler. The front of the car features an add-on nose with air dam, and when mounted with shoo goo and 2mm screws it becomes an integral part of the body. Because this area of a race body is the most prone to racing wear and tear, a second nose is supplied with the body. This provides the user with a lightweight, durable .030 lexan body, which in turn aids the handling ability of any VTA chassis. The VTA class has proven that its here to stay, and the Protoform J71 will definitely make things more interesting. Features: Made from extremely durable .030 Lexan® material 200mm wide at the front and 210mm across the rear wheel openings Add-on front nose with air dam Paint then peel over spray film, sticker sheet, and window masks included Exceptional detail for the Vintage style we all enjoy Specifications: Length: 16.9" (429mm) Front Width: 7.9" (200mm) Rear Width: 8.3" (210mm) Height: 3.9" (110mm) Wheel Base: 10.2" (260mm) Includes: (1) Clear J71 body (2) Front Body Nose Piece (1) Mounting Hardware (1) Window Masks (1) Decal Sheet This product was added to our catalog on May 3, 2023
$34.99
Traxxas TRA9711-WHT, Traxxas TRX-4M Ford Bronco Complete Body (White)
TRA9711-WHT, Traxxas TRX-4M Ford Bronco Complete Body (White) Traxxas TRX-4M Ford Bronco Complete Body. This clipless replacement body is ready to install on your Traxxas TRX-4M rock crawler and is an easy option when looking to customize your TRX-4M rock crawler with a different color or body style. Constructed out of tough ABS plastic, the TRX-4M bronco body faithfully captures all the details of the full-size Ford Bronco. Tinted windows, a spare tire carrier, rugged fender flares, side mirrors, and other molded body accessories give TRX-4M a truly authentic appearance. Just snap one onto your TRX-4M chassis and you're ready for fun and adventure! Package includes one complete body. This product was added to our catalog on May 17, 2023
$44.99
PROTOform PRM155240, 1/10 1971 Chevrolet Camaro Z28 Clear Body: Vintage Trans-Am
PRM155240, 1971 Chevrolet Camaro Z28 Clear Body :VTA Class 1/10 1971 Chevrolet Camaro Z28 Clear Body: Vintage Trans-Am Product Specifications Manufacturer # 1552-40 Body 1971 Camaro Z28 Material Polycarbonate Product Height 4.17" (106 mm) Product Length 17.25" (438 mm) Product Width 8.07" (205 mm) Refinement Color Clear Scale 1/10 Vehicle Type Touring Car Wheelbase 10.1" (257 mm)
$45.00
Traxxas TRA6811X, Body, Slash 4X4, ProGraphix (Graphics are printed, requires paint & final color application)/ decal sheet
6811X - Body, Slash 4X4, ProGraphix (Graphics are printed, requires paint & final color application)/ decal sheet TRA6811X, BODY SLASH 4X4 PRGRPHX This product was added to our catalog on September 7, 2021
$47.50
McAllister Racing MR273, McAllister Racing #273 ASA Style Camaro Late Model Body
MR273, McAllister Racing #273 ASA Style Camaro Late Model Body This is a body only. This product was added to our catalog on December 28, 2023
$29.99
McAllister Racing MR212, McAllister Racing #212 Wild Cat 3
MR212, McAllister Racing #212 Wild Cat 3 This is a body only. This product was added to our catalog on October 9, 2023
$29.99
McAllister Racing MR298, McAllister Racing #298UL 1/10 Xfinity Camaro Ultra Light Body
MR298, McAllister Racing #298UL 1/10 Xfinity Camaro Ultra Light Body This is a 1/10 Scale Xfinity Camaro Ultra Light Body. Features: Compatible with 1/10 scale pan cars and touring cars. Clear, unpainted body. Made from 0.020 Ultra Light thickness genuine Lexan. Made in the USA. This is a clear, unpainted body only. Intended for Pan Cars and Touring Cars. This product was added to our catalog on October 9, 2023
$29.99
McAllister Racing MR192, McAllister Racing 2003 Mustang Cobra
MR192, McAllister Racing 2003 Mustang Cobra Mustang Cobra 190mm Body is Clear and comes with window masks. Body is Painted to show finished product. No detail sheet is included. This is a body only. This product was added to our catalog on June 1, 2023
$29.99
PROTOform PRM173300, 1/10 Outlaw Wing Kit for PRM158500 Pro-Mod Body
PRM173300, 1/10 Outlaw Wing Kit for PRM158500 Pro-Mod Body
$36.24
Yokomo YOKYZ-870C, Yokomo Super Dog Fighter 1/10 4WD Off-Road Electric Buggy Kit
YOKYZ-870C, Yokomo Super Dog Fighter 1/10 4WD Off-Road Electric Buggy Kit Retro Iconic Buggy with Modern Capabilities & Performance Stop Reminiscing and bring the 80s 4WD Off-Road buggy racing back to life with the ultimate off-road machine that enlivened the 1980s off-road scene! It is no exaggeration to say that it became the foundation of modern off-road racing, and it is a legendary platform that boasted overwhelming speed in off-road races to gain so much popularity during that golden era or RC Racing! Although Yokomo kept the design and shape untouched, in order to utilize current power sources, this reproduced version comes equipped with gear differentials and a slipper clutch, providing a drive train capable of running powerful modern Lipo batteries. In addition, to further modify the platform to accommodate today's power supply, the battery tray was designed to fit big and small capacity models shorty LiPo batteries! Despite the fact that this vintage race machine comes with the original body, wing, and under cowling to faithfully recreate the original buggy, it has been fully updated for today’s modern power system, while also maintaining much of the original vintage feel! Equipped with aluminum bulkheads, aluminum front and rear knuckles, FRP shock towers, FRP main chassis and hard anodized aluminum shocks, providing much needed durability and boosting performance! Get the legendary Super Dog Fighter and experience the modern performance in a retro style! NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: A Re-release version of the original legendary buggy released in 1987 Hard anodized aluminum shocks Aluminum bulkhead Aluminum front and rear knuckles FRP main chassis with a battery tray that can accommodate sub-C size batteries, as well as shorty lipo batteries. Original FRP front and rear shock towers Durable gear differentials and a slipper clutch to accommodate the modern power sources and output. Adjustable turnbuckles Specifications: Scale: 1/10 Drivetrain: Belt Driven 4WD Power Supply: Electric Completion Level: Unassembled kit Includes: (1) Super Dog Fighter 1/10 4WD Off-Road Electric Buggy Kit Needed to Complete: (1) 2 Channel radio system (1) Steering servo (1) 540 Motor (1) Electronic speed control (1) 7.2V NiMh or 2S Shorty LiPo Battery (1) Compatible Battery Charger This product was added to our catalog on January 12, 2024
$469.99
McAllister Racing MR225, McAllister Racing #225 2006 Monte Carlo Stock Car Body
MR225, McAllister Racing #225 2006 Monte Carlo Stock Car Body This is a body only. This product was added to our catalog on December 28, 2023
$29.99
McAllister Racing MR240, McAllister Racing #240 1/10 Vintage Modified Coupe Body
MR240, McAllister Racing #240 1/10 Vintage Modified Coupe Body This is a body only. This product was added to our catalog on December 28, 2023
$29.99
McAllister Racing MR419, McAllister Racing Sprint Car Driver
MR419, McAllister Sprint Car Driver Driver Figure requires painting. -Comes with a separate helmet to be attached with double faced tape.-Clear and unpainted. -Fits perfectly in Sprint Cars This product was added to our catalog on June 1, 2023
$16.99
Yokomo YOKSD-GR35BA, Yokomo GReddy R35 SPEC-D Drift Body Set (Clear)
This is the Yokomo GReddy R35 SPEC-D Drift Body Set. This body is made from clear polycarbonate and includes decals and window masks. Trimming and polycarbonate paint required. Plastic parts accessories are not included and must be purchased separately. This product was added to our catalog on June 6, 2023
$54.99
Yokomo YOKSD-M786BA, Yokomo M7 Advan Max Orido Racing 86 1/10 Drift Car Body Set (Clear)
YOKSD-M786BA, Yokomo M7 Advan Max Orido Racing 86 1/10 Drift Car Body Set (Clear) This Yokomo M7 Advan Max Orido Racing 86 1/10 Drift Car Body Set is a clear polycarbonate body that is ready for you to get a custom paint scheme. Package includes one body with window mask and decals.NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted. This product was added to our catalog on June 1, 2023
$51.99
McAllister Racing MR293, McAllister Racing #293 GEN 6 Fusion body
MR293, McAllister Racing #293 GEN 6 Fusion body This product was added to our catalog on October 9, 2023
$29.99
McAllister Racing MR423, McAllister Racing Stock Car Driver & Interior
MR423 McAllister Racing Stock Car Driver & Interior -Stock car interior with great details for 1/10 cars. Comes clear and untrimmed. -9 1/4" wide and 11 3/4" long -Made from .030 Genuine Made in USA Lexan. -Made in America! This product was added to our catalog on June 1, 2023
$20.99
Yokomo YOKSD-PM90LWA, Yokomo PANDEM Light & Wing Parts Set (Clear)
YOKSD-PM90LWA, Yokomo PANDEM Light & Wing Parts Set (Clear) Yokomo PANDEM Clear Light and Wing Parts Set. This is an optional kit intended to fit the Yokomo PANDEM 90 body. Using incredible attention to detail Yokomo has recreated the scale details of this set while still keeping the parts light weight. Constructed from durable clear polycarbonate this set offers strength and the ability to customize the color to your liking. The included headlight and taillight brackets give you the ability to add LED lights for the ultimate in scale looks. NOTE: Painted body shown in the photos is for illustrative purposes only. The product you will receive is clear and unpainted.Includes: (1) PANDEM Light and Wing Parts Set including: (1) Front Bumper with Headlight Buckets (1) Rear Bumper with Taillight Buckets (1) Rear Wing Assembly Double Sided Mounting Tape This product was added to our catalog on June 1, 2023
$45.99
Traxxas TRA9711-BLK, Traxxas Body Ford Bronco Complete Black
TRA9711-BLK, Traxxas Body Ford Bronco Complete Black This product was added to our catalog on October 3, 2022
$54.99
Team Losi Racing TLR03008, TEN-SCTE 3.0 Race Kit: 1/10 4WD SCT
TLR03008, TEN-SCTE 3.0 Race Kit: 1/10 4WD SCT Key Features Champion pedigree Adjustable center driveline 22™ platform Gen II shocks Dog bone center drive Many popular tuning parts included as standard Lightweight, hard-anodized 7075-T6 aluminum chassis 3mm shorter chassis Carbon fiber shock towers Hard-anodized suspension balls Lightweight, CNC-machined outdrives High-performance TLR® body Needed To Complete Assembly Tools 2-Channel Radio and Receiver Electronic Speed Controller 540 or 550 sized motor Pinion Gear Steering Servo 1/10th Short Course Truck Tires and Inserts Battery Pack (3S Maximum) Charger Polycarbonate Paint Video Overview Overview The TEN-SCTE platform has been the dominant force in the 4WD SCT class since its inception. With the TEN-SCTE 3.0 kit, TLR engineers started with the championship-winning 2.0 and refined its suspension geometry to be optimized for all track conditions. These refinements also make the truck easier to drive. Other changes include center driveline adjustability and the inclusion of parts that were considered optional on the SCTE 2.0 kit. Champion Pedigree The TEN-SCTE platform's extensive list of race wins includes the ROAR Nationals, the Cactus Classic and a multitude of other major events. The TEN-SCTE 3.0 kit builds on this heritage by giving racers yet another superbly engineered SCT that can put them on the top of the podium. Adjustable Center Driveline The motor and center diff can be mounted at an angle or in line with the chassis, allowing adjustment of the power bleed between the front and rear drivetrain. Mounted at an angle, the power bleeds evenly front-to-rear and the truck will drive out of the turns harder from point to point. Mounted in line, more power bleeds to the rear, giving the truck more aggressive on-power steering. 22™ Platform Shocks Gen II platform shocks reduce overall weight and lower the CG. Machined shock internals, X-rings, TiCN shock shafts and aluminum bleeder caps provide a smoother, more consistent shock. The truck lands better, jumps better, corners quicker and has a lighter, more nimble feel. Dog-Bone Center Drive The center dog bones provide less friction than CVA-type driveshafts, allowing for easier front-to-rear power transfer. This smoothes out changes in power delivery, making the truck easier to drive. Popular Tuning Parts Included Many parts that were previously considered options come standard on the TEN-SCTE 3.0. These include a chassis that is 3mm shorter, 22 platform shocks, a dog-bone center driveline, 15° caster blocks, hard-anodized aluminum suspension balls, a 2.3mm thick front sway bar, lightweight outdrives, and adjustable aluminum front and rear pivots. CNC-Machined Aluminum Chassis The lightweight chassis is machined from durable 7075-T6 hard-anodized aluminum and is 3mm shorter than the stock TEN-SCTE 2.0 chassis. The shorter chassis makes the 3.0 a nimble truck that changes direction quicker and exits turns harder. It also makes it easier to drive fast and lower lap times. Carbon Fiber Shock Towers The ultimate in performance and durability, carbon-fiber shock towers save weight and help lower the CG. Hard-Anodized Suspension Balls To keep the suspension links smooth and free of slop, hard-anodized aluminum suspension balls are used throughout the truck. They are lighter than their steel counterparts and the hard-anodized coating keeps them from wearing so connector fit is always perfect. Lightweight Outdrives Lightweight, CNC-machined outdrives are used throughout the truck. This makes the entire drivetrain lighter so drivers enjoy quicker, more responsive acceleration. High-Performance TLR® Body This incredibly popular body is back for the 3.0. Made from durable 1.2mm polycarbonate, it delivers all the downforce needed to corner fast and stay in control when flying down the straights. During jumps, air under the body is channeled through strategically placed vents so the truck is more stable while airborne. Finishing the body is easy thanks to its pre-cut wheel wells, bumpers and edges. About all that's left to do is cut the vent holes and apply the paint scheme. Note: Kit includes clear body. Shown painted for example only. Product Specifications Approximate Assembly Time 3-5 Hours Ball Bearings Full Sealed Ball Bearing Body Clear, 1.2 PC Hi-Performance SCT Chassis 3mm plate, 7075-T6 aluminum Completion Level Kit Drivetrain 4WD Power Type Electric Gear Pitch 1.0 Module Internal Gear Ratio 3.9:1 Product Height 7.3 in (185mm) Product Length 21.34 in (524mm) Product Weight 6.3 lb (2.9 kg) Product Width 11.65 in (295.8mm) Receiver Sold Separately Scale 1/10 Shock Type Hard Anodized Aluminum Speed Control Sold Separately Spur Gear 40T Suspension Independent Vehicle Type Short Course Truck Wheelbase 13.15 in (334mm)
$499.99
