This is a twelve pack of Yokomo YC-1 Parts Cases. These compact part cases feature a width of 87mm and are convenient to store small bits. These cases feature up to 6 compartments when using the partition plates.
Specifications:Dimensions: 59x87x22mm (2.3x3.4x0.9 inches)
This product was added to our catalog on September 18, 2017
YOK-YC-10, Yokomo Plastic Parts & Screws Case (3) (90x70x17mm)
This is a three pack of Yokomo YC-10 Parts Cases. These little cases are a convenient way to store small screws, shims and other bits. These cases also feature a slightly rounded bottom, making it easy to remove hard to grip pieces.
Dimensions:
90x70x17mm (3.5x2.8x0.7")
This product was added to our catalog on September 18, 2021
The Yokomo YC-11 Parts Case combines the YC-11, four YC-3 and three YC-10 cases into one single purchase item that is perfect to suit the needs of every OCD enthusiast!
The YC-11 case measures in at 255x190mm making it compact and easy to store, while the 60mm depth allows you to store larger items like tools, batteries and motors. It is a variable type compartment with 8 partition boards (front side 4, back side 4), with a tough single latch closure system.
The YC-3 Parts Cases measure in at 176x36x26mm and feature 8 compartments with slip lock closures, and is perfect hardware and other small parts. Each compartment measures 20x20mm and features a radius edge that makes it easy to slide small parts out of the compartment.
The YC-10 Parts Cases measure 90x70x17mm and are a great option to store small screws, shims and other bits. These cases also have a radius bottom edge for easy small parts removal.
This product was added to our catalog on September 29, 2017
The Yokomo YC-1134 Parts Case combines the YC-11, four YC-3 and three YC-10 cases into one single purchase item that is perfect to suit the needs of every OCD enthusiast!
The YC-11 case measures in at 255x190mm making it compact and easy to store, while the 60mm depth allows you to store larger items like tools, batteries and motors. It is a variable type compartment with 8 partition boards (front side 4, back side 4), with a tough single latch closure system.
The YC-3 Parts Cases measure in at 176x36x26mm and feature 8 compartments with slip lock closures, and is perfect hardware and other small parts. Each compartment measures 20x20mm and features a radius edge that makes it easy to slide small parts out of the compartment.
The YC-10 Parts Cases measure 90x70x17mm and are a great option to store small screws, shims and other bits. These cases also have a radius bottom edge for easy small parts removal.
This product was added to our catalog on September 29, 2017
With its longest inner dimension of 320mm, this is a large part case and can hold long tools and others. Also, it is possible to freely change the compartment with 12 variable partition plates.
This product was added to our catalog on September 18, 2017
This is a pack of three Yokomo YC-3 Parts Cases. These cases are long and narrow with 8 lockable compartments for hardware and other small parts. Since the bottom of the case features a slightly round shape, removing parts is much easier.
Specifications:Dimensions: 176x36x26mm (7x1.4x1")
This product was added to our catalog on September 18, 2017
YOK-YC-5, Yokomo Plastic Parts & Screws Carrying Case (102x157x40mm)
The YC-5 parts case is a relatively small parts box at about 6x4 inches, and is very convenient for storing screws and small parts. Multiple partition plates are included to provide a maximum of 12 compartments, or less, depending on the size of your parts.
Specifications:
Dimensions:
102x157x40mm (4x6.2x1.6")
This product was added to our catalog on December 31, 2021
The YC-6 parts case is roughly 6x8 inches and is a great way to store screws, hardware and small parts. The YC-6 features three rows of compartments, with 21 partition board mounting positions.
Specifications:Dimensions: 145x207x40mm (5.7x8.1x1.6")
This product was added to our catalog on September 18, 2017
YOK-YC-7, Yokomo Plastic Parts & Screws Carrying Case (7.5 x 8.9 x 1.6")
The YC-7 is around a medium size screw box, convenient for screws, parts, shock springs and even hex tools. With 4 rows of compartments and dozens of included partition plates, the YC-7 can be configured in a variety of combinations to accommodate different needs.
Specifications:
Dimensions: 190x225x40mm (7.5 x 8.9 x 1.6")
This product was added to our catalog on September 18, 2021
The Yokomo YC-8 parts case is a relatively large parts box to store larger parts or tools, and offers a range of capabilities. Since the inside dimension width of each row is about 30cm and depth is 72mm, larger items can be stored easily. The YC-8 also features a handle for easy transport.
Specifications:Dimensions: 228x332x72mm (9x13x2.8")
This product was added to our catalog on September 18, 2017
The YC-9 parts case is a med-large box with a shallow bottom best suited for hardware, parts and 540 sized motors. The YC-9 features four compartment rows, with each row being able to divide into 7 compartments.
Specifications:Dimensions: 193x286x46mm (7.6x11.3x1.8")
This product was added to our catalog on September 18, 2017
YOKBL-RPX2DB, Yokomo RPX-II Drift Spec Brushless ESC Speed Controller
The Yokomo RPX-II Drift Spec Brushless Speed Controller represents the premium in ESC technology. Starting with high quality components such as a low resistance power supply and specialized FETs, Team Yokomo has created one of the most stable and powerful ESC's on the market. Optimized for driving performance it features in depth tuning options to adjust to a variety of track conditions and driver preferences.
This "Drift Spec" ESC is best suited for 2wd and 4wd 1/10 drift platforms and has been specifically tuned for drifting applications. Smooth throttle control and a multitude of power adjustments makes this ESC one of the best drift oriented options.
Changing the program settings can be done with the Yokomo Brushless Programmer (YOKBL-RPXP2), sold separately. The ESC can also be remotely programmed using the smartphone application and Yokomo WiFi Module (YOKBL-WMA).
Features:
Dedicated sensored brushless controller
Programmable with YOKBL-WMA Wi-Fi module or YOKBL-RPXP2 Programmer
49 Individual ESC programming parameters
A multitude of boost and turbo adjustments
Advanced brake adjustments
Full aluminum case with cooling vent & high power 30mm cooling fan
Specifications:
Motor Type: Sensored Brushless
Motor Limit: 3.0T (specification when using the fan)
Operating Voltage: 3.7-7.4V
Forward/Brake/Reverse: Yes
Full Aluminum Case/Heatsink: Yes
Typ. Voltage Drop @20A per Phase: 0.048V
Rated Current per Phase: 249A
Plugged 30x30x10mm Fan: optional
BEC Output: 6V/7.4V 6A Linear Continuous Current
BEC Output Short Protection: Yes
"Boost 0" Mode: Yes
Multi-frequency system: Yes
Power Wires: 12 AWG
Case Size: 32.9x34.6x19.6mm (without fan)
Weight: 44g (without cables and fan)
This product was added to our catalog on September 5, 2023
YOKBL-WMB, Yokomo WiFi Brushless ESC Speed Control Programmer
This is the Yokomo WiFi Brushless ESC Speed Control Programmer. A Wi-Fi module makes Yokomo‘s latest BL-PRO4 / RS4 / SP4 ESC series more easily programmable! Connect the WiFi Module to the ESC programmer connection connector, perform Wi-Fi connection with the smartphone, and rewrite the ESC with the application installed on the smartphone. If you leave the BL-WM on the machine, you can change the setting at any time as long as the motor is not rotating.
Of course, because it is a wireless connection, even while driving on a circuit, you can stop using the pit road once and rewrite the setting directly from the control panel. In addition, since it has a telemetry function that can check live current / voltage value and rotation speed while driving, mechanics can also monitor the driving situation on the course side. Since traveling data is stored as a log, it can be used as information to set a better program by checking after running.
Specifications:Compatible ESCs: BL-PRO4 (N/B), BL-RS4, BL-SP4Case size: 25×25×9mmWeight: Approx 7g*WiFi connection may be interrupted depending on usage environment. Please note.*It may be prohibited by your local race rules to install the Wi-Fi module while driving; please follow your local circuit rules.
This product was added to our catalog on October 26, 2023
YOKD-177FSA, Yokomo YD-2 Front Direct Type RWD Drift Spring (Soft)
The Yokomo YD-2 Front Direct Type RWD Drift Spring is a rough winding type with excellent response developed for RWD drift applications. This spring is designed to maximize the properties of the spring material by eliminating the paint from the surface. It responds sharply to steering input and improves driving feel with a high level of response. Even under high speed driving, understeer is not likely to occur. The soft type is suitable for p-tile and colored concrete surfaces.
This product was added to our catalog on June 6, 2023
YOKDP-YD2RTR-1, Yokomo YD-2 1/10 2WD RTR Drift Car w/Supra Body (Red or White)
The Yokomo YD-2 1/10 2WD RTR Drift Car with Supra Body offers the prowess of the RWD YD-2 chassis in a ready to run option. The YD-2 chassis has quickly become a preferred chassis in the drift world and now comes in this pre-built form giving both beginners and experts an easy entry into drifting. Utilizing more than 90% of the same parts used on the YD-2Z platform offers the user an abundance of compatible option parts and upgrades. Featuring fine tuned steering geometry gives incredible steering angles and consistent handling characteristics with the use of 4-wheel independent suspension. Complementing this competitive chassis is a powerful 27-turn motor, a reliable 2.4ghz radio system and a precision steering gyro. With reliable performance out of the box and compatibility with most replacement and optional parts for the YD-2Z chassis this Yokomo 1/10 2WD RTR Drift Car kit offers an unsurpassed value.
Features:
Pre-Built RTR (Ready to Run) vehicle
Upgradable chassis based on the latest model YD-2Z
2.4GHz radio system
27-turn motor for drifting
Equipped with steering gyro
Nickel-metal hydride 1600mAh battery
AC quick charger
PANDEM GR Supra Painted body
Drift exclusive tires & wheels
Needed to Complete:
(4) AA Batteries for the Transmitter
This product was added to our catalog on May 29, 2023
YOKDP-YD2RTR-2, Yokomo YD-2Z 1/10 RWD RTR Electric Drift Car w/Supra Body (Red or White)
Yokomo YD-2Z RWD RTR Drift Car with Supra Body
Yokomo YD-2Z 1/10 2WD Ready-To-Run Drift Car with Supra Body. Designed to be a great budget and a beginner friendly option, making it the perfect platform for new hobbyists to get in drifting without sacrificing performance and can always upgrade their car as their skills grow! Based on the latest proven RWD drift YD-2Z platform with 90% or more of the parts being used in this car with plenty of optional replacement parts and performance upgrades already available! In addition, the aftermarket support for Yokomo drift platforms is second to none!
Featuring fine tuned steering geometry that provides incredible steering angles and consistent handling characteristics with the use of 4-wheel independent suspension. Complementing this competitive chassis is a powerful 27-turn motor, a reliable 2.4ghz radio system and a precision steering gyro. With reliable performance out of the box and compatibility with most replacement and optional parts for the YD-2Z chassis, this Yokomo 1/10 2WD RTR Drift Car kit offers unmatched value!
Features:
Pre-Built RTR (Ready to Run) vehicle
Upgradable chassis based on the latest model YD-2Z
2.4GHz radio system
27-turn motor for drifting
Equipped with steering gyro
Nickel-metal hydride 1600mAh battery
AC quick charger
PANDEM GR Supra Painted body
Drift exclusive tires & wheels
Specifications:
Scale: 1/10
Completion Level: Fully assembled and ready-to-run
Power Plant: Electric
Motor: 27-Turn Brushed
ESC: Brushed
Length: 425mm
Width: 198mm
Height: 256mm
Weight: 1500g
Gear Ratio: 1:2.6
Includes:
(1) YD-2Z 1/10 RWD RTR Electric Drift Car with Supra Body
(1) 2.4GHz Transmitter and Receiver
(1) 1800mAh Ni-MH Battery
(1) Battery Charger
(1) User Manual
Needed to Complete:
(4) AA Batteries for the Transmitter
This product was added to our catalog on July 20, 2023
YOKDP-YD2SG, Yokomo YD-2S 1/10 2WD RWD Drift Car Kit w/YG-302 Steering Gyro This is the Yokomo YD-2S 1/10 2WD RWD Drift Car Kit with an included YG-302 Steering Gyro. Featuring a one-piece resin chassis, superior ease of handling, high rear traction with a high mount motor, the YD-2S is ideal for low grip road surfaces, such as P tile and concrete! The high-mount motor pulls effective roll especially on low grip road surfaces, and it is possible to run with a high sense of stability even in a slippery situations.
This kit comes including a steering gyroscope, which is important for RWD drift, and it is also a perfect fit for those who are trying RWD drift for the first time. The attached gyroscope is a Yokomo YG-302, which helps prevent hunting (malfunction) due to a hypersensitive reaction while high response, realistic drift driving is enabled.
High Motor Mount LocationThe highlight of YD-2S is the high mount motor layout as a results of new gear box development. Conventional high mount motor layout on YD-2 has been driven by third party conversions, however those are too much height since they just re-layout the motor position by adding high priced carbon made parts with ridiculous appearance.
Too much higher role center delivered the disadvantages on performance as well, such as slow acceleration at the corner exit, and it is not easy to drive at the competition track. YD-2S enable to select 3 kind of motor positions in order to suits for the best role center to deliver the best rear traction in several kind of slippery environments.
TransmissionFully updated designed 4 transmission could squeeze into the bottom of motor, and it is the type to increase the rear traction as rotational torque goes up, supreme for low friction surfaces. Rear differential has 4 pinion gears. Since the motor layout can be changed by selecting from 3 rotate positions at the motor mount plate, the weight balance of the car will be also adjustable to find out the best setting for keeping the supreme steering angle and speed in any kind of slippery surface condition.
BatteryThe battery is limited to Shorty LiPo battery, but the mounting layout will have 4 different positions by selecting battery stopper location on the chassis. The layout will be Vertical, Horizontal Front/Mid/Rear in order to complete the fine tuning on weight balance and forward/backward traction.
Features:
High mount motor
4 Gear rear transmission
Updated designed, Sealed gear box
4 wheel independent double wishbone suspension
SLF aluminum big bore oil dumber
Plastic main chassis
Adjustable aluminum motor mount system
RWD high angle steering system
49mm bone rear universal shaft
Narrow scrub steering block
Wide/Narrow rear diffuser
Includes YG-302 High response Steering gyro
Specifications
Length: 425mm
Width: 198mm
Wheelbase: 256mm
Second reduction rate: 1?2.6
Overall weight: 1500g
Needed To Complete:
2-Channel radio system
Electronic Speed Control
540 Motor
Steering servo
7.4V LiPo battery pack
Compatible battery charger
Drift car tires & Wheels
200mm TC or Drift body
Polycarbonate paint for body
NOTE: Completed vehicle shown for illustrative purposes only and is not included.
This product was added to our catalog on November 30, 2021
YOKDPP-302V4B, Yokomo DP-302 V4 Drift Steering Gyro
The Yokomo DP-302 V4 Drift Steering Gyro is a super high performance steering gyro that supports a wide range of needs and is perfect for beginners, high-level competitors, and everyone in between. With newly developed circuitry, this gyro offers 4 selectable modes and features the latest high-performance semiconductor chipset and programming. This helps to eliminate any undesired steering shake from gyro operation, helping to detect excessive movement and reducing the chance of unsettling the chassis. This gives the user unparalleled control over almost any surface.
Designed to make fine adjustments a breeze and switch access is massively improved. The aluminum case has a crisp thin design and the beveled edge has been given a luxurious gold anodizing. The quad control system, which is a revolutionary function, is roughly divided into two: “dual gain mode” and “dual gain control”.
In dual gain mode, ASSIST (assist) and NOR (normal) can be switched by the dip switch. In the ASSIST mode, correction of the gyroscope works strongly against driver’s operation and steering inputs. Allowing even total beginners to enjoy RWD drifting with ease. In NOR mode, the driver’s steering operation is prioritized, making it possible for you to counter steer your chassis allowing more control over larger movements of the steering range.
In dual gain control the gain can be adjusted in the range of SOFT and HARD respectively. In SOFT mode it will be easier to obtain initial front grip by suppressing the initial response of the gyro, taking away a little of the punch, making for tighter more controlled transitions. So it will be suitable for driving on smaller low grip tile and carpet track surfaces. In HARD mode, it is set for driving beginners and large-scale track layouts by increasing the initial response of the gyro.
Yokomo has also added an endpoint adjustment button that allows you to set the travel of the servo through the gyro, preventing any unwanted stress on the steering system, reducing power drain and overheating your servo.
This product was added to our catalog on March 15, 2023
YOKGT1-01AG, Yokomo GT1 Rookie Speed Type-A 1/12 Pan Car Kit w/Steering Gyro
Yokomo GT1 Rookie Speed Type-A 1/12 Pan Car Kit with Gyro
This is the Yokomo GT1 Rookie Speed (RS) 1/12 Electric Pan Car Kit with type-A body and YG-302 gyro . This beginner friendly GT1 pan car kit is a direct drive chassis designed for reliable performance. The low form of the GT1 allows for quick response and speedy cornering performance. Equipped with a realistic body shape, semi-slick tread radial tires and a relatively simple chassis configuration, it is the perfect package to start racing a pan car. The front suspension settings and wheelbase can be changed to tune the chassis to your driving surface.
NOTE:
Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model
This chassis is only designed for shorty Li-Po batteries
Features:
Direct rear 2WD
Includes a high performance aerodynamic clear body
includes YG-302 steering gyro suitable for many applications
Shorty LiPo size battery tray centered in the middle to aid in balancing the chassis weight
All-round radial pattern rubber tires included
King pin and coil spring front suspension
Specifications:
Scale: 1/12
Type: Electric
Length: 408mm
Width: 180mm
Height: 95mm
Wheel Base: 234mm (239mm selectable)
Weight: 920g
Includes:
(1) Yokomo GT1 Rookie Speed Type-A 1/12 Pan Car Kit
(1) YG-302 gyro
(1) Type-A body
Needed to Complete:
(1) 2-Channel Radio/Transmitter & Receiver
(1) Steering Servo
(1) Electronic Speed Controller (ESC)
(1) 540 Motor
(1) 1S or 2S Shorty LiPo
(1) Compatible Charger
Polycarbonate paint for body
This product was added to our catalog on March 15, 2023
Limited Edition Purple! MD 1.0 Master Drift 1/10 Drift Kit
The Yokomo MD 1.0 Master Drift 1/10 2WD RWD Drift Car Kit features the latest drift technology. The team at Yokomo has taken years of drifting experience and incorporated an incredible amount of features into this highly competitive drift car. Using graphite suspension arms never used in drift cars before is the first hint that this machine is truly race inspired. Drift cars need adjustability and this MD 1.0 delivers. With a multitude of adjustments consisting of car width, skid angle, roll center camber, toe and more you will have no problem tuning your vehicle to the track conditions. Another feature that Yokomo focused on the transmission. Using a three gear transmission out of the box gives you a positive torque setup helping to plant the rear of the vehicle under power. As an option, Yokomo has given you the ability to convert to a more neutral four gear transmission setup again allowing you to tune for any track conditions. Packed with features and adjustments it is easy to see why they call this the "Master Drift".
NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
Limited Edition Purple!
Limited specification with color anodized main aluminum parts
RWD gear drive
Front and rear aluminum shock towers
Lightweight graphite Shorty battery holder
5mm Graphite suspension arms
Differential height adjustment (3 levels)
Adjustable motor position (13 levels)
Aluminum rod end adapter
Big bore aluminum low friction shocks
Updated ultra-lightweight slide rack steering
Graphite upper deck
Graphite rear ESC mount to maximize traction
Graphite flat body mount plate
Aluminum rear bulkhead for both 3/4 gear transmissions
2.4mm rigid Lightweight graphite chassis
Includes:
(1) Limited Edition MD 1.0 Master Drift 1/10 RWD Drift Car Kit
Needed to Complete:
(1) 2-3 Channel radio system
(1) Electronic Speed Control
(1) 540 Motor
(1) Steering Servo
(1) 2S (7.4V) LiPo battery
(1) Compatible Battery Charger
(1) Drift tires & Wheels
(1) 200mm TC or Drift body
(1) Polycarbonate paint for body
Tools for assembly
This product was added to our catalog on July 13, 2023
Yokomo SD 2.0 Super Drift 1/10 Electric RWD Drift Car Kit (Black, Purple or Red)
The Yokomo SD 2.0 Super Drift 1/10 2WD RWD Drift Car Kit is welcomed into the drifting world with high expectations, with enough tuning capabilities to get lost in, this chassis is great for novice to adept level drivers. The SD 2.0 has been designed to dominate, whether you are leading or chasing this chassis will have you dragging bumper, flowing like water, and is sure to have you spinning brodies around the competition.
The Yokomo SD 2.0 was designed to be one of the most customizable platforms out there the SD 2.0 lets you tune to your heart's desire. With a wide range of adjustability, this RWD platform offers the ability to make changes to suit changing track conditions or driver preferences. Using an updated two piece carbon main chassis the SD 2.0 includes two gearbox options, one three gear and one four gear. These two gearbox options change the direction of the motor allowing for different on-power throttle feel and traction. Additionally included are aluminum oil filled shocks, lightened slide rack steering setup with updated steering knuckles for an overwhelming cutting angle, aluminum shock towers, and updated high traction rear hubs giving the SD 2.0 premium high quality chassis components for precision driving feel and durability. If you are looking for a high quality, highly adjustable 2WD drift platform then look no further, the Yokomo SD 2.0 super drift RWD drift car is the kit for you!
NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
Updated steering blocks for overwhelming cutting angles
Variable transmission with selectable 4 or 3 gears
Differential height adjustments
Rear bias servo mount
Aluminum rear bulkhead
Lightweight slide rack
High traction rear hubs
Split rear chassis
Lightweight resin front bulkhead
30:70 weight distribution
Specifications:
Scale: 1/10
Length: 16.7in (425mm)
Width: 7.7in (198mm)
Wheelbase: 10in (256mm)
Approximate Weight: 52.9oz (1500g)
Drive: RWD
Power Source: Electric
Gear Ratio: 1:2.6
Assembly Level: Kit
Includes:
(1) Yokomo SD 2.0 Super Drift 1/10 Electric RWD Drift Car Kit
Needed to Complete:
(1) 2-3 Channel radio system
(1) Electronic Speed Control
(1) 540 Motor
(1) Steering Servo
(1) Drift Gyro
(1) 2S (7.4V) LiPo battery
(1) Compatible Battery Charger
(1) Drift tires & Wheels
(1) 200mm TC or Drift body
(1) Polycarbonate paint for body
Tools for assembly
This product was added to our catalog on July 17, 2023
YOKRP-032A, Yokomo 40x40x10mm Racing Performer Cooling Fan
This is the Yokomo Performer Racing Cooling Fan. Coming in at a square 40mm × 40mm, with a 10mm thickness, this fan can push a large volume of air to force cool your motor or ESC. With the included 15cm extension cord, mount this fan in the chassis and plug it into a BEC unit for operation.
This product was added to our catalog on January 10, 2023
YOKRP-6313W6A, Yokomo 12mm Hex Racing Performer High Traction RWD Drift Wheels (White) (2) (6mm Offset)
These are the Yokomo Racing Performer High Traction RWD Drift Wheels, with a 12mm hex and 6mm offset. These high traction type RP wheels are freshly designed, pursuing to the limit of traction and tracking ability on low grip road surfaces.
By maintaining high circularity accuracy and giving it moderate flexibility, it induces "deflection" during throttle operation, greatly improving traction performance. The rib on the back side of the wheel is also a bold cut, reducing interference with the arm, realizing more stable steering control.
The design which treated the rim part black is 1 inch down size, fits street style bodies.
NOTE: These wheels cannot be mounted on resin/plastic/composite disk wheel hubs of standard drift packages. Please use aluminum clamp type hub hexes
This product was added to our catalog on May 13, 2022
YOKRP-6313W6A, Yokomo 12mm Hex Racing Performer High Traction RWD Drift Wheels (White) (2) (6mm Offset)
These are the Yokomo Racing Performer High Traction RWD Drift Wheels, with a 12mm hex and 6mm offset. These high traction type RP wheels are freshly designed, pursuing to the limit of traction and tracking ability on low grip road surfaces.
By maintaining high circularity accuracy and giving it moderate flexibility, it induces "deflection" during throttle operation, greatly improving traction performance. The rib on the back side of the wheel is also a bold cut, reducing interference with the arm, realizing more stable steering control.
The design which treated the rim part black is 1 inch down size, fits street style bodies.
NOTE: These wheels cannot be mounted on resin/plastic/composite disk wheel hubs of standard drift packages. Please use aluminum clamp type hub hexes
This product was added to our catalog on May 13, 2022
YOKRP-6313Y6A, Yokomo 12mm Hex Racing Performer High Traction RWD Drift Wheels (Yellow) (2) (6mm Offset)
These are the Yokomo Racing Performer High Traction RWD Drift Wheels, with a 12mm hex and 6mm offset. These high traction type RP wheels are freshly designed, pursuing to the limit of traction and tracking ability on low grip road surfaces.
By maintaining high circularity accuracy and giving it moderate flexibility, it induces "deflection" during throttle operation, greatly improving traction performance. The rib on the back side of the wheel is also a bold cut, reducing interference with the arm, realizing more stable steering control.
The design which treated the rim part black is 1 inch down size, fits street style bodies.
NOTE: These wheels cannot be mounted on resin/plastic/composite disk wheel hubs of standard drift packages. Please use aluminum clamp type hub hexes.
This product was added to our catalog on May 13, 2022
The Yokomo Drift Performance DX1 "R" Brushless Motor is great for asphalt, carpet or any other high grip surface. This motor was designed to have good low end torque that smoothly rolls to the high rpm band. The cutouts in this motor look great and help keep the motor cool. Package includes one brushless motor.
Features:
Suitable for asphalt and carpet
High rotation - ideal for high-grip road surfaces
Latest stator and coil for smooth rotation
Specifications:
Turn: 10.5T
This product was added to our catalog on September 5, 2023
YOKSD-ACRA, Yokomo Drift Inter Cooler/Oil Cooler Set
This is a replacement Yokomo Inter Cooler/Oil Cooler Set for 1/10 scale drift bodies. This set requires mounting and possible mounting hardware, not included.
This product was added to our catalog on June 1, 2023
This is the Yokomo GReddy R35 SPEC-D Drift Body Set. This body is made from clear polycarbonate and includes decals and window masks. Trimming and polycarbonate paint required.
Plastic parts accessories are not included and must be purchased separately.
This product was added to our catalog on June 6, 2023
YOKSD-GRA90BA, Yokomo PANDEM GR Supra Drift Body Set (Clear)
The Yokomo PANDEM GR Supra Drift Body Set faithfully replicates the aggressive silhouette of a modified GR Supra. By taking the incredibly refined GR Supra platform, and adding the PANDEM aero body kit, this body is a testament to Yokomo's desire to stay on the cutting edge of the drift market. Yokomo's original molding technology faithfully molds the PANDEM aero kit with the front grille, rear underskirt, and deep side constrictions in one single piece - making it easy to add a custom wide body look to your drift build. The attractive lines of the beautifully curved Supra, combined with the accurate addition of the PANDEM body kit gives this body a realistic finish that you wouldn't expect from a RC car body.
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
This product was added to our catalog on June 1, 2023
YOKSD-M786BA, Yokomo M7 Advan Max Orido Racing 86 1/10 Drift Car Body Set (Clear)
This Yokomo M7 Advan Max Orido Racing 86 1/10 Drift Car Body Set is a clear polycarbonate body that is ready for you to get a custom paint scheme. Package includes one body with window mask and decals.NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
This product was added to our catalog on June 1, 2023
YOKSD-PM90LWA, Yokomo PANDEM Light & Wing Parts Set (Clear)
Yokomo PANDEM Clear Light and Wing Parts Set. This is an optional kit intended to fit the Yokomo PANDEM 90 body. Using incredible attention to detail Yokomo has recreated the scale details of this set while still keeping the parts light weight. Constructed from durable clear polycarbonate this set offers strength and the ability to customize the color to your liking. The included headlight and taillight brackets give you the ability to add LED lights for the ultimate in scale looks. NOTE: Painted body shown in the photos is for illustrative purposes only. The product you will receive is clear and unpainted.Includes:
(1) PANDEM Light and Wing Parts Set including:
(1) Front Bumper with Headlight Buckets
(1) Rear Bumper with Taillight Buckets
(1) Rear Wing Assembly
Double Sided Mounting Tape
This product was added to our catalog on June 1, 2023
YOKSP-03DV2, Yokomo SP-03 D V2 Programable Brushless Drift Servo (High Voltage) (Black, Purple, Red)
This is the Yokomo SP-03 D V2 Programmable Brushless Drift Servo. The SP-03D V2 is equipped with an updated program that offers faster speed, higher torque, and incredible holding power. In order to maximize performance of the brushless motor, this servo is capable of supporting up to 7.4V DC. While greatly improving the basic performance, the steering holding power is increased to enhance stability during cornering, with an incredible linear feeling while driving.
As a drift-only servo, the hunting suppression function that prevents malfunction is just as important as the specifications. This suppression function is also equipped with the latest program, which makes it possible to run the steering gyro with a higher gain than normal. If you use a dedicated programmer, you can change the performance of the servo and the hunting suppression level, so you can fine-tune the steering characteristics to your liking.
Features:
Adjustable to suit your track surface via a new design program card
Full aluminum case that enhances both cooling and looks
To prevent weight increase in the front we have designed weight reduction into the case
Brushless motor & high voltage power gives outstanding precision and torque
High precision aluminum gear set used for weight reduction and high dive efficiency
Specifications:
Operating Voltage: 4.8V-7.4V
Torque:
@4.8V: 180 oz-in (13kg.cm)
@6.0V: 222 oz-in (16kg.cm)
@7.4V: 249 oz-in (18kg.cm)
Size: 1.6x0.79x1.02in (40.8x20.2x26.1mm)
Weight: 1.72oz (49g)
Color: Black, Purple, Red
This product was added to our catalog on January 10, 2023
YOKSP-USBP, Yokomo USB Servo Programmer (SP-02D/03D)
This is the Yokomo USB Servo Programmer. This programmer offers the ability to plug your servo directly into a PC to conveniently change servo settings. Designed to accept servos such as the SP-02D and SP-03D this allows the user to adjust each value of power, torque, hunting suppression, and neutral width. It also enables a reverse function of servo for special applications. Package includes one USB servo programmer.
This product was added to our catalog on December 07, 2023
YOKY2-OP4A, Yokomo YD-2S Aluminum Adjustable Body Mount/Shock Tower Set (Black)
Yokomo YD-2S Aluminum Adjustable Body Mount/Shock Tower Set. This is an optional accessory intended for the YD-2S drift car. Constructed using high quality carbon fiber and aluminum these optional mounts integrate shock mounting and feature a plethora of adjustments. This gives the user the ability to fine tune handling along with body fitment. Also included is an aluminum upper arm mount and front camber link mount adding strength and style to the front of the YD-2S.
Includes:
(1) Front Carbon Fiber Shock Tower
(1) Front Aluminum Shock Tower Mount
(1) Front Aluminum Camber Link Mount
(1) Front Aluminum Upper Arm Mount
(1) Rear Aluminum Shock Tower with Integrated Camber Link Mount
Mounting Hardware
This product was added to our catalog on June 1, 2023
YOKY2-SBBSRA, Yokomo YD-2 Super Low Friction Aluminum Big Bore Shock Set (Red)
The Yokomo YD-2 SLF (Super Low Friction) Aluminum Big Bore Shock Set is an excellent optional shock for your YD-2. Featuring red anodized aluminum parts and a low friction Kashima coating you get the style and performance your YD-2 deserves. Using a big bore shock body design matched with a super low friction Kashima coating and o-rings these will have dependable performance in the most demanding of situations. When using harsh riding resin tires common to drift setups these shocks can make the difference when it comes to consistency, along with increasing traction giving a significant advantage. Package includes all parts to build four complete shocks for the YD-2 with the exception of springs and shock oil.
This product was added to our catalog on March 15, 2023
YOKY4-016A, Yokomo Front/Rear Body Mount Set
This is a replacement Yokomo Front/Rear Body Mount Set.
This product was added to our catalog on June 1, 2023
YOKYC-10A, Yokomo Plastic Parts & Screws Case (3) (90x70x17mm)
This is a three pack of Yokomo YC-10 Parts Cases. These little cases are a convenient way to store small screws, shims and other bits. These cases also feature a slightly rounded bottom, making it easy to remove hard to grip pieces.
Specifications:Dimensions: 90x70x17mm (3.5x2.8x0.7")
This product was added to our catalog on March 13, 2024
YOKYT-25PB5A, Yokomo Racing Pit Bag V 1/10 Hauler Bag
The Yokomo Racing Hauler Pit Bag V is an updated version of the Pit Bag IV. This bag features redesigned logos, and is a great option to haul around 1/10 on road, drift and off road models. Featuring a roll up main flap that exposes four removable drawers - two large 50.8x12.7x22.8cm lower drawers for cars or large pit station tools, with two smaller 25.4x12.7x22.8cm upper drawers that are perfect for smaller parts.
Plus, there is a pocket on the top designed to hold hand tools, a pocket on the back for a setup board, and a pocket on the side for setup sheets and manuals. Two heavy duty wheels and a telescopic handle allow for easy transport and round out the package.
NOTE:
This bag is shipped disassembled to reduce shipping costs - some assembly required!
Dimensions may vary slightly due to manufacturers tolerances
Dimensions:
Interior (WxHxD): 53 x 42 x 22cm (20.8x16.5x8.6")
Small Drawer (WxHxD): 25.4 x 12.7 x 22.8cm (10x5x9")
Large Drawer (WxHxD): 50.8 x 12.7 x 22.8cm (20x5x9")
This product was added to our catalog on July 14, 2023.
YOKYZ-870C, Yokomo Super Dog Fighter 1/10 4WD Off-Road Electric Buggy Kit
Retro Iconic Buggy with Modern Capabilities & Performance
Stop Reminiscing and bring the 80s 4WD Off-Road buggy racing back to life with the ultimate off-road machine that enlivened the 1980s off-road scene! It is no exaggeration to say that it became the foundation of modern off-road racing, and it is a legendary platform that boasted overwhelming speed in off-road races to gain so much popularity during that golden era or RC Racing!
Although Yokomo kept the design and shape untouched, in order to utilize current power sources, this reproduced version comes equipped with gear differentials and a slipper clutch, providing a drive train capable of running powerful modern Lipo batteries. In addition, to further modify the platform to accommodate today's power supply, the battery tray was designed to fit big and small capacity models shorty LiPo batteries!
Despite the fact that this vintage race machine comes with the original body, wing, and under cowling to faithfully recreate the original buggy, it has been fully updated for today’s modern power system, while also maintaining much of the original vintage feel! Equipped with aluminum bulkheads, aluminum front and rear knuckles, FRP shock towers, FRP main chassis and hard anodized aluminum shocks, providing much needed durability and boosting performance! Get the legendary Super Dog Fighter and experience the modern performance in a retro style!
NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
A Re-release version of the original legendary buggy released in 1987
Hard anodized aluminum shocks
Aluminum bulkhead
Aluminum front and rear knuckles
FRP main chassis with a battery tray that can accommodate sub-C size batteries, as well as shorty lipo batteries.
Original FRP front and rear shock towers
Durable gear differentials and a slipper clutch to accommodate the modern power sources and output.
Adjustable turnbuckles
Specifications:
Scale: 1/10
Drivetrain: Belt Driven 4WD
Power Supply: Electric
Completion Level: Unassembled kit
Includes:
(1) Super Dog Fighter 1/10 4WD Off-Road Electric Buggy Kit
Needed to Complete:
(1) 2 Channel radio system
(1) Steering servo
(1) 540 Motor
(1) Electronic speed control
(1) 7.2V NiMh or 2S Shorty LiPo Battery
(1) Compatible Battery Charger
This product was added to our catalog on January 12, 2024
YOKZR-DRC, Yokomo DRC Competition Drift Tire (4) (for Carpet Surface)
This is a pack of four Yokomo DRA Competition Drift Tires for use on Carpet surfaces. This is a solid type competition resin drift tire DRC. It is the optimum compound for carpet surface and features an updated design of tire thickness, tread shape and sidewall shape.
Although it is possible to mount this tire on a general tenth size drift wheel as it is, in case the size is loose, use a tire attachment tape (YOKZR-DRT) between the tire and the wheel.
This product was added to our catalog on August 22, 2021
YOKZR-DRPA, Yokomo DRPA Competition Drift Tire (4) (for P-Tile)
This is a pack of four Yokomo DRPA Competition Drift Tires for use on P-tile surfaces. This is a solid type competition resin drift tire ideal for P-tile and has been long term tested to ensure consistent traction and sliding characteristics. Previously tires have tended to require a long period of break-in to achieve their optimal grip, but the DRPA provides constant grip right out of the box and maintains stable performance over the long run.
Although it is possible to mount this tire on a general tenth size drift wheel as it is, in case the size is loose, use a tire attachment tape (YOKZR-DRT) between the tire and the wheel.
This product was added to our catalog on January 10, 2023
