Easy Move Fiberglass 90mm x 450mm battery tray by MBP. The Easy Move tray allows for both the easy install / removal of lipo packs without the stress of having to use Velcro directly stuck on your packs. The downfall of using velcro directly on lipo packs is that the removal of the packs pulls & stresses the aluminum tabs connectors inside of the packs. This system removes that stress by allowing the battery to be strapped directly to the tray with Velcro straps and when you need to remove the battery simply unscrew one thumb screw and remove the pack with absolutely no stress to the pack. See the video on the bottom of this page.Another great feature is this system allows for the quick forward and backward adjustments for fine tune the balance of your boat.Specs:90mm (3.54") x 450mm (17.71") Weight: approx 481 gramsIncludes:(1) trayRequires: Velcro straps and installation into hull
Carbon, Water cooled heavy duty motor mount for 36mm motors.Fits 36mm diameter motors that are 60mm or longer in length.Both water-cooled and adjustable. The rear motor clamp helps carry the weight of the heavier/longer 36mm motors. Angle is adjustable to allow straight alignment with propeller cable.The anodized aluminum mounting plate with extended Carbon Fiber mounting stands to distribute the weight of the motor over a larger area for added strength. The mounting plates have holes drilled in the bottom to allow the epoxy to flow into them to make a superior bond to the hull. This mount can fit a flat mounting area like a rigger or hydro, or a deep vee.
Applications:Fits most 36mm motors that are 60mm or longer.For example Feigao, Nemesis, Hacker 540XL motors. Tp36xx, Leopard 3660, 3674Will fit up to a 50mm long water jacket.Measures:Total width of 58mm including the mounting stands.Metal center mounts measure 54mm wide.Requires you to provide motor mounting screws.Comes with mount only. Motor and water jacket only in pictures for display purposes.
