HRASTE288RC, Hot Racing Traxxas Slash Rear Light Weight CV Splined Drive Shaft (2)
This is a set of Hot Racing Traxxas Slash Rear Light Weight CV Splined Drive Shafts, intended for use with the Traxxas electric Stampede and Rustler models. This is an optional upgrade heavy duty splined star drive axle kit.
Features:
CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum construction
Replaces factory plastic drive axles
Hard Black Anodized Aluminum Slider
Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
Design eliminated CV pin setscrew
Hardened S2 Spring steel wheel shaft
#45 Steel is black finish S2 spring in Brown finish
Rubber dust boot to keep the Splined Drive for maximum protection against the elements
Replaces Traxxas TRA1951 half shafts, TRA2753X stub axles, and TRA4628 output yokes
Specifications:
Approximate overall collapsed length: 109mm
Includes:
(2) Rear Cv Splined Drive Shaft spline CVD shaft assemblies
(2) M4x2.5x11mm screw shafts
Fits:
Traxxas Rustler 2wd
Traxxas Stampede 2wd
This product was added to our catalog on December 16, 2021
HRATE311R01, Hot Racing Aluminum Speed Run Wheelie Bar (2wd Slash, Rustler, Bandit)
The Hot Racing Aluminum Speed Run Wheelie Bar is an optional upgrade for Traxxas 2WD LCG Slash, Rustler and Bandit models.
Features:
CNC Machined aluminum construction
180mm in length with an 0 to 10 deg adjustable angle
Side or center wheel setup options, and a solid aluminum ladder frame construction
NOTE: This part Is for Speed Run/Drag Racing and is NOT recommended for off-road use.
This product was added to our catalog on March 21, 2022
HRATRX15GPL06, Hot Racing Traxxas Power Up Gear Adapter (Long)
The Hot Racing Traxxas Power Up Gear Adapter fits the 1/10 Traxxas Bandit, Jato 3.3, Rustler, Slash 2WD, and Stampede 2WD.
Features:
Eliminates the transmission slipper assembly to transmit all power to wheels without slip
Lighter rotating mass for faster acceleration
Great for stock off road classes or oval racing!
CNC machined 6061 aluminum, anodized blue
NOTE:
Please note the slipper function is eliminated, placing additional strain on drivetrain components which may lead to increased wear
Fits vehicles using Traxxas 5556 slipper. Completely replaces slipper assembly, including pressure plates and slipper pads
Fits: Bandit, Jato 3.3, Rally, Rustler, Slash 2WD and Stampede 2WD
This product was added to our catalog on March 6, 2021
MTD1500, Method RC Terraform Belted Pre-Mount 1/10 Monster Truck Tire (Black) (2) w/Array Beadlock 12mm & 14mm Hex Wheels
Traxxas Jato
Traxxas Nitro Rustler
Traxxas Nitro Stampede
Traxxas Rustler 2wd
Traxxas Stampede 2wd
Traxxas Stampede 4x4
The Method RC Terraform Belted Pre-Mount 1/10 Monster Truck Tire are designed to increase stability and consistency at high speeds. These Terraform tires are made from an advanced rubber compound specifically for bashing. Each tire is firmly held in place using 40 screws that go through the bead of the tire. The tread pattern is designed to tackle dirt, concrete and asphalt with tread depth for long wear and the ability to clear debris. Designed for 1/10 scale power systems, these tires feature hand-laid belts to keep ballooning to the absolute minimum. Pre-mounted to Array wheels and equipped with a removable 12mm or 14mm hex.
Features:
Hand-laid belts nearly eliminate tire expansion creating a stable/consistent platform at high speeds
Less tire expansion greatly reduces the "gyro" effect reducing the overall load on the servo, axles, plastics and hub bearings
Unique tread detail throughout provides a neutral/all-around performance on an array of surfaces
Generous tread depth for long wear and the ability to easily clear debris
Pre-mounted to Method RC Array Beadlock Wheels
Specifications:
Tire:
Tire Diameter: 5.04" (101.6mm)
Tire Width: 2.69" (68.3mm)
Wheels:
Hex Size: 12mm/14mm
Bead Diameter: 2.8" (71mm)
Width: 1.97" (50mm)
Center Bore: 0.211" (5.4mm)
Back Spacing: Varies based on hex used
Offset: 2.1mm/9.5mm
Includes:
Terraform Belted Tires
Array Beadlock Wheels
Foam Inserts
(2) 12mm Hex 2.1mm Offset
(2) 12mm Hex 9.5mm Offset
(2) 14mm Hex 2.1mm Offset
(2) 14mm Hex 9.5mm Offset
This product was added to our catalog on August 29, 2024
TRA3631X, Traxxas HD Cold Weather Front Suspension Arm Set (Black)
This is an optional Traxxas HD Cold Weather Front Suspension Arm Set, a heavy duty set of front suspension arms for for 2WD Slash, Stampede, and Rustler feature an updated design which incorporates the latest proprietary composite material, available in multiple colors. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it off a curb, or preparing for the next speed run, these arms were built for extreme wear.
This product was added to our catalog on September 7, 2021
TRA3651L, Traxxas Stampede ProGraphix Body (Clear)
This is a Traxxas Stampede ProGraphix Body, and is intended for use with the Stampede Monster Truck. This body comes 80% pre-painted with the graphics already painted on the inside, however large portions of the body are left clear so you can apply your own final color to finish the paint scheme. Included is one body with a decal sheet for windows, grill and lights.
This product was added to our catalog on October 4, 2023
Traxxas Stampede 2WD ProGraphix Pre-Painted Body
Traxxas Stampede 2WD Pre-Painted Body. This pre-painted and pre-trimmed body is a replacement for the Traxxas Stampede 2WD but can also be used as an option for the Stampede 2WD and Stampede VXL 2WD monster truck. Package includes one pre-painted body.
This product was added to our catalog on October 4, 2023
