36054-8, Traxxas Stampede 1/10 RTR Monster Truck w/XL-5 ESC, TQ 2.4GHz Radio, Battery & USB-C Charger The Traxxas Stampede 1/10 RTR Monster Truck has been an icon in the monster truck category since its debut back in 1994. Designed to be an off-road bashing machine, the Stampede gives drivers the ground clearance and stability to tackle all types of challenging terrain. Powered by a potent Titan 12-turn motor and equipped with the XL-5 waterproof ESC, the Stampede is a go to choice for those looking to get into the action with speed, quality, and pure off-road fun. Traxxas wants to make sure that you get out and enjoy the benefits of this truck as soon as possible. This is why Traxxas includes a 3000mAh Nickle-Metal-Hydride (NiMH) battery and a convenient USB-C charger in the box. The battery pack is able to deliver ample run time with the charger being an easy way to get things topped off to get back out and continue bashing. This Stampede also includes the Traxxas TQ 2.4GHz Radio System to give drivers an excellent range to drive their monster truck. The Stampede includes a pre-painted ProGraphix body shell that gives users that monster truck feel. The decals on the body are pre-applied to depict headlights, grille, inner roll cage, and more! Get out and enjoy the outdoors with the Traxxas Stampede, the legendary off-road Traxxas Monster Truck! CHARGER NOTE: Power adapter and cable sold separately. For maximum charging rate, please use the Traxxas Power Adapter and Traxxas Charging Cable (TRA2912 & TRA2916 - both sold separately). Features: Tough Traxxas 2WD 272 Magnum Transmission High Torque Traxxas 2056 Steering Servo 4-Inches of Ground Clearance to Tackle Terrain Includes Pre-Painted Bodyshell Easy Access Battery Compartment Includes Battery and Charger for Easy of Use Delivers a Top Speed of Over 30MPH (with 7-cell NiMH battery and included 21-tooth pinion gear) Three Driving Profiles Specifications: Scale: 1/10 Length: 16.9in (428mm) Width: 12.75in (324mm) Height: 9.84in (250mm) Wheelbase: 10.6in (270mm) Weight: 65.3oz (1.85kg) Power Source: Electric Input Voltage: 6-cells (7.2V) NiMH 2S (7.4V) LiPo Drive: RWD Gear Pitch: 48P Gear Ratio: 2.72 (final drive: 12.34) Assembly Level: Ready-To-Run Includes (1) Traxxas RTR Stampede (1) 3000mAh Battery with Traxxas ID Connector (1) USB-C Battery Charger (1) User Manual Needed To Complete (4) AA Batteries for Transmitter This product was added to our catalog on September 27, 2023

Read more less

36254-8, Traxxas Stampede HD 1/10 RTR 2WD Electric Monster Truck w/XL-5 ESC, TQ 2.4GHz Radio, Battery & USB-C Charger (NEW) Clipless Monster Truck Body Tough LED-ready front and rear bumpers Includes wheelie bar Body reinforcements to prevent pull-through damage Holds tight for intense action Quick and easy removal Smooth appearance with no body posts or clips High-Performance Waterproof XL-5™ Electronic Speed Control Innovative waterproof design Three drive profiles Sport Mode - forward / brake / reverse Race Mode - forward / brake Training Mode™ - 50% forward / brake / 50% reverse (patented) Traxxas EZ-Set® one-button setup LiPo and NiMH compatible with two-stage low-voltage detection Titan 550 Motor Powerful Titan® 12T 550 brushed motor with internal cooling fan Oversized armature for big torque and increased power handling Virtually maintenance-free operation Extreme Heavy Duty Parts Installed Strengthened C-hubs, axle carriers, and steering blocks HD suspension arms TQ™ 2.4 GHz 2-Channel Radio System Ergonomic transmitter with internal antenna Traxxas 6519 3-channel micro receiver with fail-safe security Sealed watertight receiver box keeps the receiver dry Includes Battery and USB-C Charger 4-amp USB-C fast charger 3000 mAh Traxxas 7-cell 8.4 V NiMH battery with iD® Easy Access Battery Compartment Accepts NiMH 6 and 7-cell flat packs and hump packs Accepts 2-cell LiPo batteries Transmission and Driveline Brushless-ready Magnum 272™ metal-gear transmission Torque-Control™ slipper clutch system Planetary gear differential with steel ring gear Sealed gearbox protects the transmission with beefed up motor guard External gear cover with easy clutch access Heavy-duty telescoping U-joint driveshafts and yokes Tough Fiber-Composite Monocoque Chassis Tall 4″ center ground clearance to drive over obstacles Steering High-torque waterproof Traxxas 2056 steering servo Spring-loaded servo saver helps protect against impacts Suspension Durable solid camber links eliminate the need for adjustment Captured rod ends won't pop off Springs and Shocks Fully adjustable oil-filled Ultra Shocks™ with X-ring technology White powder-coated springs Wheels and Tires Pre-glued high profile Talon™ all-terrain tires with performance foam inserts 2.8″ All-Star™ wheels Precision Hex Hardware This product was added to our catalog on September 6, 2024

Read more less

HRASJT253, Hot Racing Traxxas 32P Steel Spur Gear (Grey) (53T) This is the Hot Racing Steel 32 Pitch, 53 Tooth Spur Gear with grey hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4. Features: CNC machined and lightened hardened steel construction Black oxide coating for durability and corrosion resistance Grey-colored countersunk washers Specifications: Number of Teeth: 53 Gear Pitch: 32 pitch (0.8 module) Mounting Holes: 3 Tooth Face width: 6mm (0.24 inch) Internal diameter: ~11mm (~0.43 inch) Includes: 54 tooth 32 pitch spur gear (3) mounting screws (3) grey-colored countersunk washers (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate) Requires: Hardened clutch bell or pinon gear Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential. This product was added to our catalog on December 16, 2021

Read more less

HRASJT254, Hot Racing Traxxas 32P Steel Spur Gear (Silver) (54T) This is the Hot Racing Steel 32 Pitch, 54 Tooth Spur Gear with Silver hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4. Features: CNC machined and lightened hardened steel construction Black oxide coating for durability and corrosion resistance Silver-colored countersunk washers Specifications: Number of Teeth: 54 Gear Pitch: 32 pitch (0.8 module) Mounting Holes: 3 Tooth Face width: 6mm (0.24 inch) Internal diameter: ~11mm (~0.43 inch) Includes: 54 tooth 32 pitch spur gear (3) mounting screws (3) silver-colored countersunk washers (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate) Requires: Hardened clutch bell or pinon gear Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential. This product was added to our catalog on May 16, 2021

Read more less

HRASLF25SH06, Hot Racing Traxxas Slash/Stampede 4x4 Aluminum Lock Servo Arm (25T)This product was added to our catalog on December 16, 2021

Read more less

HRASTE288RC, Hot Racing Traxxas Slash Rear Light Weight CV Splined Drive Shaft (2) This is a set of Hot Racing Traxxas Slash Rear Light Weight CV Splined Drive Shafts, intended for use with the Traxxas electric Stampede and Rustler models. This is an optional upgrade heavy duty splined star drive axle kit. Features: CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum construction Replaces factory plastic drive axles Hard Black Anodized Aluminum Slider Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement Design eliminated CV pin setscrew Hardened S2 Spring steel wheel shaft #45 Steel is black finish S2 spring in Brown finish Rubber dust boot to keep the Splined Drive for maximum protection against the elements Replaces Traxxas TRA1951 half shafts, TRA2753X stub axles, and TRA4628 output yokes Specifications: Approximate overall collapsed length: 109mm Includes: (2) Rear Cv Splined Drive Shaft spline CVD shaft assemblies (2) M4x2.5x11mm screw shafts Fits: Traxxas Rustler 2wd Traxxas Stampede 2wd This product was added to our catalog on December 16, 2021

Read more less

PRO1019610, 1/10 Demolisher F/R 2.8" MT MTD 12mm Blk Raid (2) Fits: Stampede 2wd Stampede 4x4 Granite™ (ARA102727, ARA4202V3 and ARA4302V3) with the use of 14mm Hex Adapters PRO634600 or PRO634700 Other 1:10 Monster Trucks with 12mm Hexes Check out optional plastic & aluminum 6x30 hexes (sold separately) to fit other trucks! 12mm (narrow & wide) (PRO633700 12mm Aluminum Narrow / PRO633701 12mm Aluminum Wide / PRO633500 12mm Plastic Narrow and Wide) 14mm (PRO634600 14mm Aluminum / PRO634700 14mm Plastic) 17mm (PRO633800 17mm Aluminum / PRO633600 17mm Plastic)

Read more less

RPM70662, RPM Wide Front A-Arms (2) (Black) Traxxas Rustler Stampede This is a pair of optional RPM Wide Front A-Arms. Are you looking to add some serious stability to your electric Rustler or Stampede 2wd? Look no further! RPM wide front A-arms will push your front wheels out there almost 1-1/4” (31.8mm) of total width for some serious stability-adding performance. These Wide Front A-arms extend the front width by exactly the difference in offset between the front and rear wheels. All you need to do is get a second set of “front” wheels and bolt them to the rear to align the front and rear tires and you’re good to go! No expensive prefabricated widening kits or time-consuming conversions. It’s as easy as replacing your stock A-arms with RPM wide A-arms, swap the turnbuckles and camber links for longer versions (not included see “NOTE:” below) and bolt on a set of rear wheels! It couldn’t be easier. Available in black, blue or green.You already know RPM A-arms are the toughest molded a-arms in the R/C industry (gram for gram, stronger than aluminum as well)! Each RPM A-arm is molded from RPM's trademark blend of nearly indestructible nylons and backed by their world-renowned limited lifetime warranty against breakage. RPM durability combined with RPM affordability; there’s no way you can go wrong! NOTE: RPM wide A-arms for the Traxxas Rustler & Stampede 2wd fit all electric versions of these models, although additional parts (not included) are required for completion as listed here: Rustler XL-5: 1 – RPM Screw Kit RPM70680, 1 – Traxxas TRA3643 (long camber links), 1 – Traxxas TRA3645 (long toe links) & 1 pair of compatible front wheels (used to replace rear wheels). Stampede XL-5: 1 – RPM Screw Kit RPM70680, 1 – Traxxas TRA3643 (long camber links), 1 – Traxxas TRA2338 (96mm long toe links) & 1 pair of compatible front wheels (used to replace rear wheels). Rustler VXL: 1 – Traxxas TRA3643 (long camber links), 1 – Traxxas TRA3645 (long toe links) & 1 pair of compatible front wheels (used to replace rear wheels). Stampede VXL: 1 – Traxxas TRA5138 (long toe links) & 1 pair of compatible front wheels (used to replace rear wheels). This product was added to our catalog on April 9, 2015 This product was added to our catalog on December 16, 2021

Read more less

RPM80182, RPM Traxxas Rustler/Stampede Rear A-Arms (Black) (2) A set of optional RPM Rear A-Arms, and are intended for use with the Traxxas Electric Rustler and Stampede trucks. This product was added to our catalog on December 16, 2021

Read more less

RPM80242, RPM Front A-Arms (Black) (Rustler, Stampede & Slash) (2) This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd. These arms are built to withstand abuse. Plus, they shave some unwanted unsprung weight as well! RPM Front A-arms are nearly 25% lighter than stock versions of the same A-arms, and are backed by RPM's world-renowned breakage warranty. Additionally, RPM has increased clearance areas in the outer portion of the A-arms to allow increased droop travel when used in conjunction with RPM oversized bearing carriers (RPM80372 & RPM80382). RPM front A-arms for the Electric versions of the Traxxas Slash, Rustler & Stampede are sold in pairs and are available in black, green, blue and red. These A-arms are molded with what is fast becoming an RPM trademark design of angled leading and trailing edges to reduce frontal edge mass and improve the a-arm’s ability to ride up and over tall obstacles instead of slamming into them. RPM A-arms are extremely rigid for superior ride and stability over the roughest tracks and terrain. Features: Nearly 25% lighter than stock Stronger material resists flexing and breaking Increased clearance in outer area of arms This product was added to our catalog on December 16, 2021

Read more less

RPM80372, RPM Front Bearing Carrier Set (Black) (2) (Slash, Bandit, Rustler, Stampede) RPM Traxxas Steering Blocks are the perfect solution for worn bushings and weak 5x8mm bearings. Give your electric the same bearing the nitro trucks come stock with - 5x11mm! The oversize bearings have higher load ratings than a 5x8mm bearing and will significantly increase the time between maintenance. In addition, these oversized bearing carriers are so strong, RPM guarantee that they won't ever break! When used in conjunction with the RPM Rear Bearing Carriers (RPM80382), you'll never have to worry about worn-out bushings or blown wheel bearings again! NOTE: 5x11x4mm bearings are not included. 4 bearings are required. Features: Fits the 2WD Slash, Nitro Slash, Bandit, Electric Rustler and Electric Stampede Replaces stock Traxxas #3736 5x11x4mm size bearings not included Available in Black and Blue This product was added to our catalog on October 13, 2021

Read more less

RPM80375, Front Bearing Carrier, Blue: TRA 2WD Product Details Key Features Fits the 2WD Slash, Nitro Slash, Electric Rustler and Electric Stampede Replaces stock Traxxas #3736 5x11x4mm size bearings not included Available in Black and Blue Overview Traxxas Bandit Traxxas Nitro Slash Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd RPM oversized bearing carriers are the perfect solution for worn bushings and weak 5 x 8mm. bearings! Give your electric the same performance the nitro trucks come stock with. 5 x 11mm. bearings have higher load ratings than a 5 x 8mm. bearing and will significantly increase the time between maintenance periods. In addition, our bearing carriers are so strong; we guarantee that they won't ever break! Molded in black. When used in conjunction with our #80382 Rear Bearing Carriers, you'll never have to worry about worn-out bushings or blown wheel bearings again! Tech Notes: 5x11x4mm. bearings are not included with these kits (4 bearings are needed for each kit). Product Specifications Material Plastic Refinement Color Blue This product was added to our catalog on December 16, 2021

Read more less

RPM80382, Rear Bearing Carriers, Black: RU, ST, BA, SLH Product Details Key Features Strong and durable Overview Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM’s front and rear bearing carriers allow e-Rustler, e-Stampede, Slash & Bandit owners to install massive 5mm x 11mm bearings (not included) that will not only improve performance, but will increase the time interval between maintenance periods. In addition, our front and rear bearing carriers are molded in black from RPM’s killer blend of bulletproof nylons and are guaranteed not to break! Product Specifications Refinement Color Black Material Plastic

Read more less

RPM80712, Caster Blocks, for Traxxas Electric Slash, Stampede, Rustler, Nitro Slash, Black Product Details Traxxas Nitro Slash Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd Overview RPM Caster Blocks for the Traxxas Slash, e-Rustler & e-Stampede are the final link in for a complete, bulletproof front suspension from RPM for these trucks. RPM Caster Blocks are redesigned to slim down unnecessary bulk while improving strength and durability in this heavily impacted area. These are stock replacement items. No additional parts or modifications are necessary to mount a set to a vehicle. RPM Caster Blocks are molded in our trademark blend of ultra durable and super strong nylons and backed by the best breakage warranty in the R/C industry. Each package contains one left side and one right side caster block. Tech Notes: RPM #80715 Caster Blocks replace Traxxas stock #3632 Caster Blocks. RPM Caster Blocks retain stock Rustler & Stampede 30 degree caster settings. These Caster Blocks will not work on nitro versions of the Rustler & Stampede nor 4wd versions of the Stampede or Slash. Product Specifications Refinement Color Black Material Plastic

Read more less

RPM81262, RPM Camber Links (Rustler, Stampede) This product was added to our catalog on December 16, 2021

Read more less

TFE128, Sealed Bearing Kit-TRA Stampede VXL 2WD  

Read more less

TRA1951R, Traxxas Heavy Duty Steel CV Rear Driveshaft (2) This is a pack of two Traxxas Heavy Duty Steel CV Rear Driveshafts. Traxxas Steel Constant Velocity Shafts deliver the ultimate in torque handling and efficient power transfer with gleaming nickel-plated shafts, combined with black silicone boots that add a custom look with improved durability. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are captured so there is less worry about losing a pin.  This product was added to our catalog on April 13, 20213

Read more less

TRA3623, Traxxas Stampede Front & Rear Skid Plate Set (Black) This product was added to our catalog on September 7, 2021

Read more less

TRA3631, Traxxas HD Cold Weather Front Suspension Arm Set (Black) This is an optional Traxxas HD Cold Weather Front Suspension Arm Set, a heavy duty set of front suspension arms for  for 2WD Slash, Stampede, and Rustler feature an updated design which incorporates the latest proprietary composite material, available in multiple colors. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it off a curb, or preparing for the next speed run, these arms were built for extreme wear. This product was added to our catalog on April 21, 2021

Read more less

TRA3636T, Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4) This product was added to our catalog on September 7, 2021

Read more less

TRA3637, Traxxas Front Axles (2) Fits: Traxxas Drag Slash Traxxas Nitro Slash Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd This product was added to our catalog on September 7, 2021

Read more less

TRA3638, Traxxas Rear Shock Tower Replacement part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Ford® F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede® This product was added to our catalog on September 7, 2021

Read more less

TRA3678, Traxxas Wheelie Bar Assembly (Black) This is a replacement wheelie bar assembly from Traxxas. This wheelie bar mounts to the rear of the car to prevent if from flipping over backwards during hard acceleration. The patented Traxxas adjustable wheelie bar features four-position adjustment to control the height of your wheelies. Durable composite nylon construction offers an extra level of protection for the motor and transmission case. Installation is quick and easy while optional aluminum wheels with rubber tires (5186 and 5186A) provide extra style and increased performance (sold separately). Replacement part for these models: Stampede® VXL Accessory part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Ford® F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® This product was added to our catalog on September 7, 2021

Read more less

TRA3694, Traxxas Stampede Light Kit w/Front & Rear Bumpers This product was added to our catalog on February 14, 2023

Read more less

TRA3695, Traxxas Slash Pro-Built Complete Transmission (fits 1/10-scale 2WD Rustler, Bandit, Stampede, Slash) This product was added to our catalog on May 7, 2021

Read more less

TRA3725X, Traxxas Battery Expansion Kit (Rustler/Bandit/Stampede) The battery expansion kit from Traxxas allows the installation of larger format battery packs into the Velineon® powered Rustler VXL, Bandit VXL, and Stampede VXL. The package includes hardware to raise the electronic speed control mount and battery posts allowing clearance for taller battery packs. This product was added to our catalog on May 7, 2021

Read more less

TRA3739, Traxxas Screw Pin Set This is a replacement suspension screw pin set from Traxxas. These suspension screw pins are used where the suspension arms pivot. Fits: Traxxas Bandit Traxxas Hoss Traxxas Nitro Slash Traxxas Rally Traxxas Rustler 2wd Traxxas Rustler 4x4 Traxxas Slash 2wd Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede 2wd This product was added to our catalog on April 12, 2021

Read more less

TRA3740, Traxxas Suspension King Pins w/ E-Clips (2) This is a set of two replacement suspension king pins with e-clips from Traxxas. This product was added to our catalog on April 29, 2021

Read more less

TRA3773, Traxxas Anaconda Rear Tires w/All-Star Wheels (2) (Chrome) (Standard) This is a set of two Traxxas Anaconda tires, premounted on chrome All-Star rear wheels, and are intended for use with Traxxas Rustler electric trucks. Choose from Chrome, or Black Chrome finish wheels. This product was added to our catalog on May 7, 2021

Read more less

TRA3787, Traxxas 2WD Hardware Kit Give your Traxxas model a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware. Individual compartments keep everything organized with a handy label to measure and identify the parts. This product was added to our catalog on October 4, 2023

Read more less

TRA6779, Traxxas Stampede 4x4 Rear Ring & Pinion Gear This is the replacement Traxxas Rear Ring and Pinion Gear for the Stampede 4x4. This set features a 12 tooth pinion and 47 tooth ring gear, and is for use in the rear gearbox of the Stampede 4x4. This product was added to our catalog on September 7, 2021

Read more less

TRA9495, Traxxas Magnum 272R Assembled Transmission The Traxxas Magnum 272R Assembled Transmission has been developed specifically for hard hitting drag applications. This replacement transmission is intended for the Traxxas Drag Slash, however, it will work with the 2WD Bandit, Rustler, Stampede or Slash. Package includes one preassembled transmission. Traxxas Bandit Traxxas Drag Slash Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd The transmission comes preassembled with all metal gears, bevel gear differential and easily removeable differential. To hold these components together, Traxxas has made an extremely rigid case that incorporates the suspension arm mounts and mount positions for the optional wheelie bar. Full metal gears are used allowing optimal power transfer. Sealed bevel gear differentials are easily tunable to help you get maximum traction on any surface. A removable cover on the bottom of the transmission case allows for ease of access to the differential making maintenance a breeze. All of these features and functions allow greater consistency and all around performance. Features:  Extremely rigid case Includes 3.2mm aluminum motor plate Full metal gears Tunable sealed differential This product was added to our catalog on October 19, 2021

Read more less

YEA-TRSL-015RBU, Yeah Racing Traxxas Slash/Stampede 4x4 HD Rear Driveshafts (Blue) Yeah Racing Traxxas Slash/Stampede 4x4 HD Rear Driveshafts. These optional driveshafts are made from tool grade steel to provide extreme strength. The center section of the shaft is made from aluminum to keep weight low providing an excellent balance between weight and strength. Package includes two drive shafts intended for the Traxxas Slash 4x4 or Stampede 4x4. This product was added to our catalog on December 16, 2021

Read more less

YEA-TRSL-017RD, Yeah Racing Traxxas Slash/Stampede/Bandit Aluminum Big Bore Shocks (Red) (2) Yeah Racing Traxxas Slash/Stampede/Bandit Aluminum Big Bore Shocks. These optional shocks are a great way to increase the handling performance of your Traxxas Slash, Stampede or Bandit. These shocks come assembled and only require you to fill with the shock fluid of your choice (sold separately). Package includes two assembled shocks. This product was added to our catalog on March 4, 2021

Read more less

YEA-TRSL-018BU, Yeah Racing 105mm Aluminum TR-XB Big Bore Shocks (Blue) (2) Yeah Racing 105mm Aluminum TR-XB Big Bore Shocks. These optional shocks feature threaded bodies and are intended for the Traxxas Stampede, Slash or Bandit. Package includes two assembled shocks. NOTE: These shocks do not come pre-oiled and will require you to fill with your shock fluid. Features: Perfect fit for the Traxxas Slash, Stampede or Bandit Threaded aluminum shock bodies This product was added to our catalog on December 16, 2021

Read more less