58034-8, Traxxas Slash 1/10 RTR 2WD Short Course Truck w/XL-5 ESC, TQ 2.4GHz Radio, Battery & USB-C Charger
The Traxxas Slash 1/10 RTR Short Course Truck has been meticulously crafted for durability, performance, and pure enjoyment. Equipped with the formidable Titan 12T 550 motor and the rock-solid reliability of the XL-5 electronic speed control, the Slash fearlessly tackles every high-flying, fender-banging adventure you throw its way. Its water-resistant electronics ensure the fun continues even in wet weather. Grab your transmitter and brace yourself for thrilling dirt-roosting power slides.
The Slash boasts a resilient design, built on the proven modular tub chassis featuring a fully independent suspension with heavy-duty steel turnbuckles for precise camber and toe adjustments. Powering its dynamic performance is the Titan 550 motor, seamlessly connected to the brushless-ready Traxxas Magnum 272 transmission. To keep those wheels spinning, heavy-duty Traxxas driveshafts ensure reliable power transfer, making every ride a thrilling experience!
The resilient clipless body of the Slash steadfastly endures the most rigorous actions, secured by robust latches that tightly grip the frame. These heavy-duty latches, while holding the body securely, effortlessly release within seconds, granting swift access to the chassis. The ingenious hidden latching system of the Slash eliminates the need for cumbersome body clips, replacing them with sizable reinforced panels designed to withstand pull-through damage, ensuring durability and convenience.
CHARGER NOTE: Power adapter and cable sold separately. For maximum charging rate, please use the Traxxas Power Adapter and Traxxas Charging Cable (TRA2912 & TRA2916 - both sold separately).
Features:
Clipless body mounting system
4-amp USB-C NiMh Fast Charger
Fully adjustable steel turnbuckles
Brushless-Ready metal gear Magnum 272 transmission
Lightning-fast Titan 12-Turn 550 brushed motor delivers blistering speeds over 30MPH!
Reliable Waterproof XL-5 Electronic Speed Control with three driving profiles
100% Fully assembled and Ready-To-Race
Specifications:
Scale: 1/10
Length: 22.8in (578mm)
Width: 11.65in (296mm)
Wheelbase: 13.2in (335mm)
Weight: 76.2oz (2160.2g)
Power Source: Electric
ESC Voltage:
NiMH: 6-7 Cell NiMH (7.2-8.4V)
LiPo: 2S LiPo (7.4V MAX)
Drive: RWD
Gear Pitch: 48P
Gear Ratio: 2.72 (final drive: 12.58)
Assembly Level: Ready To Run
Includes:
(1) Traxxas RTR Slash
(1) 3000mAh Battery with Traxxas ID Connector
(1) USB-C Battery Charger
(1) User Manual
Needed To Complete:
(4) AA Batteries for Transmitter
This product was added to our catalog on September 27, 2023
DRC-304.1, DragRace Concepts DragPak Slash Drag Race Conversion Kit Combo (Standard Motor) (Red) w/Shock Towers, Wheelie Bar & Mount
The DragRace Concepts DragPak Slash Street Eliminator Drag Race Conversion Kit Combo includes the DRC Slider 10" wheelie bar, carbon shock towers, rear shock tower mount and shock mount hardware, to make it easier to convert a 2wd Traxxas Slash chassis into a rear motor no prep dominator.
This lightweight 6oz carbon fiber chassis was developed for the racer that will not be satisfied with a typical Slash drag chassis conversion. Using a combination of precision machined aluminum and carbon fiber, the DragPak system dramatically reduces weight compared to the factory plastic chassis, while the design creates a stiff and rigid platform that is perfect for high powered drag setups. The mid motor configuration flips the position of the standard transmission and puts the motor in front of the rear shock tower. This moves the weight closer to the centerline and provides a more centralized weight balance. Plus, the stock bell crank steering system has been upgraded with a machined aluminum, dual ball bearing set up for increased control, while remaining compatible with the stock steering linkage.
Features:
Convert your Traxxas Slash 2wd to a DragRace Concepts Drag Pak Slash
Rear Motor configuration
For the serious racer who is looking for a high performance advantage
Lightweight 6oz carbon fiber design chassis
Dramatically reduces weight
3mm carbon fiber main chassis and 2.5mm top deck
Machined aluminum standoffs
Machined aluminum servo mounts
Machined aluminum dual ball bearing bell crank steering system
Machined aluminum wheelie bar mount
Machined aluminum rear shock tower mount
10" slider wheelie bar
Shock mounting hardware included
Includes:
Carbon Fiber Chassis Kit
Bell Crank Steering
Steering Servo Mounts
Front & Rear Shock Towers
Rear Shock Tower Mount
Shock Mount Hardware
10" Slider Wheelie Bar
Needed to Complete:
Traxxas Slash Donor Car
RPM Bandit Front A-Arms RPM80492
RPM Bandit Rear A-Arms RPM73282 - or - Custom Works Adjustable Toe Rear A-Arms Short CSW3242
Traxxas Bandit Rear Driveshafts TRA1651
RPM Rear Bumper Mount RPM80902
Slash Front Shocks for Front & Rear
DragRace Concepts 4x36mm Turnbuckles DRC-729
DragRace Concepts 4x48mm Turnbuckles DRC-730
No Prep Street Eliminator Wheels & Tires
No Prep Street Eliminator Body
This product was added to our catalog on December 16, 2021
DRC-323.1, DragRace Concepts DragPak Slash Drag Race Conversion Kit Combo (MidMotor) (Red) w/Shock Towers, Wheelie Bar & Mount
The DragRace Concepts DragPak Slash "Mid Motor" Street Eliminator Drag Race Conversion Kit Combo includes the DRC Slider 10" mid motor wheelie bar, carbon shock towers, rear shock tower mount and shock mount hardware, to make it easier to convert a 2wd Traxxas Slash chassis into a mid motor no prep dominator.
This lightweight 6oz carbon fiber chassis was developed for the racer that will not be satisfied with a typical Slash drag chassis conversion. Using a combination of precision machined aluminum and carbon fiber, the DragPak system dramatically reduces weight compared to the factory plastic chassis, while the design creates a stiff and rigid platform that is perfect for high powered drag setups. The mid motor configuration flips the position of the standard transmission and puts the motor in front of the rear shock tower. This moves the weight closer to the centerline and provides a more centralized weight balance. Plus, the stock bell crank steering system has been upgraded with a machined aluminum, dual ball bearing set up for increased control, while remaining compatible with the stock steering linkage.
Features:
Convert your Traxxas Slash 2wd to a DragRace Concepts Drag Pak Slash
Mid Motor configuration
For the serious racer who is looking for a high performance advantage
Lightweight 6oz carbon fiber design chassis
Dramatically reduces weight
3mm carbon fiber main chassis and 2.5mm top deck
Machined aluminum standoffs
Machined aluminum servo mounts
Machined aluminum dual ball bearing bell crank steering system
Machined aluminum wheelie bar mount
Machined aluminum rear shock tower mount
10" slider wheelie bar
Shock mounting hardware included
Includes:
Carbon Fiber Chassis Kit
Bell Crank Steering
Steering Servo Mounts
Front & Rear Shock Towers
Rear Shock Tower Mount
Shock Mount Hardware
10" Slider Wheelie Bar
Needed to Complete:
Traxxas Slash Donor Car
RPM Bandit Front A-Arms RPM80492
RPM Bandit Rear A-Arms RPM73282 - or - Custom Works Adjustable Toe Rear A-Arms Short CSW3242
Traxxas Bandit Rear Driveshafts TRA1651
RPM Rear Bumper Mount RPM80902
Slash Front Shocks for Front & Rear
DragRace Concepts 4x36mm Turnbuckles DRC-729
DragRace Concepts 4x48mm Turnbuckles DRC-730
No Prep Street Eliminator Wheels & Tires
No Prep Street Eliminator Body
This product was added to our catalog on November 5, 2021
EXO1985, Exotek Traxxas Slash/Bandit "Vader" Drag Race Chassis Conversion
TX Vader Drag Chassis Conversion, for the 2wd Slash / Bandit
TX VADER drag chassis conversion set.
Lightweight 'street eliminator' drag chassis conversion set for use with TRAXXAS 2WD SLASH OR BANDITS KITS.
Converts your Slash to be cash race ready for the hot 'Street Eliminator No Prep' race classes springing up around the US.
Provides the legal 13" wheelbase to fit under the hottest new no prep bodies that are on the market.
Based on the excellent handling and proven 22 VADER design.
This pro chassis conversion set features
- Carbon fiber made and machined in USA
- Heavy duty 2.5mm thick chassis and side rail plates
- Centralized servo mounting for improved balance
- Alloy servo mounting block that ties into the side rails for extra rigid and tweak free front chassis setup
- Modular chassis design- allows standard rear motor or optional mid motor gear box placement (see instructions for build notes)
- 6 heavy duty alloy side rail posts
- Pro AE B6 style full ball bearing supported steering rack and crank set
- Includes 25 spline clamping alloy servo horn (25 spline servo required like the Traxxas servo etc.)
- Alloy parts are finished in glossy black with blue chamfers for that factory racing look
- Carbon fiber top bulkhead plate
- Multi position shorty lipo mounting to adjust for wheelie/ no wheelie balance
- 2 level chassis design allows you to lower or raise the center of gravity for stability yet keeps the gear box higher to increase traction and keep the drive axles straighter for higher speeds
- The 2 layer rear chassis also raises the rear roll center which increases the forward launch traction while reducing side to side roll for improved high speed stability.
- Offers multiple weight balance options to maximize grip on the street or on the track
- Includes steel hex hardware (requires high quality metric hex tools, 2.0 & 2.5mm)
- Includes a lipo hold set
- Includes large Exotek logo stickers
- Includes instruction sheet
Other option parts shown not included.
Wheelie bar shown is not included.
Requires assembly. Shown assembled for display purposes only
Also required:
Traxxas 2wd SLASH or BANDIT kit
Traxxas body mount set TRA1914R
Traxxas toe link set TRA3745 or TRA3139A (2 sets needed)
This product was added to our catalog on December 16, 2021
RCE1849BL, Slash 2/4WD Aluminum Front Shock (pr) - Blue
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment. Replaces the kit plastic shocks (TRA3760).
Firm Springs Included
Specifications:
Spring Length: 57mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
RCE1849RD, Slash 2/4WD Aluminum Front Shock (pr) - Red
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment. Replaces the kit plastic shocks (TRA3760).*Firm Springs Included
Specifications:
Spring Length: 57mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
RCE1850BL, Slash 2/4WD Aluminum Rear Shock (pr) - Blue
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment.*Firm Springs Included
Specifications:
Spring Length: 66mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
RCE1850R, Slash 2/4WD Aluminum Rear Shock (pr) - Red
Slash 2/4WD Aluminum Rear Shock (pr) - Red
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment.
Specifications:
Spring Length: 66mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
Team FastEddy Traxxas Slash 2WD Bearing Kit. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(15) 5x11x4
(4) 5x8x2.5
NOTE:
Photo of unpackaged bearings shows random bearings and is not representative of what you will receive.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. FastEddy does their best to keep the kits updated. If you find a variation or mistake in this kit, please contact us.
This product was added to our catalog on June 29, 2021
Team FastEddy MST RMX 2.0 RTR Drift Sealed Bearing Kit. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(4) 3x6x2.5
(1) 4x10x4
(8) 5x8x2.5
(1) 5x10x4
(2) 5x11x4
(2) 8x12x3.5
(4) 10x15x4
NOTE:
Photo of unpackaged bearings shows random bearings and is not representative of what you will receive.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. FastEddy does their best to keep the kits updated.
TRA3677, Traxxas Wheelie Bar Mount (Black)
This is a replacement Traxxas Wheelie Bar Mount, and is intended for use with the Traxxas 2wd models like the Slash, Bandit, Rustler and Stampede.
This product was added to our catalog on September 7, 2021
TRA3736, Traxxas Steering Blocks (2) (VXL)
This is a set of two replacement steering blocks from Traxxas. These steering blocks mount the the front uprights, and support the front axles.
This product was added to our catalog on May 29, 2021
TRA3739, Traxxas Screw Pin Set
This is a replacement suspension screw pin set from Traxxas. These suspension screw pins are used where the suspension arms pivot.
Fits:
Traxxas Bandit
Traxxas Hoss
Traxxas Nitro Slash
Traxxas Rally
Traxxas Rustler 2wd
Traxxas Rustler 4x4
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 2wd
This product was added to our catalog on April 12, 2021
TRA5883, Traxxas BFGoodrich KM2 Tire w/Split-Spoke Rear Wheel (2) (Black) (Standard))
This is a set of two Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires, Pre-Mounted on Split-Spoke SCT Wheels. These are intended for use on the front and rear of the Traxxas Slash 4x4 and the rear of the Traxxas Slash 2wd line of trucks. These are fully licensed BFGoodrich Mud-Terrain T/A tires, and have been proven performers in TORC series competition. The distinctive tread design has been faithfully re-created, complete with white sidewall lettering.
Fits:
Traxxas Nitro Slash
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Telluride 4x4
The design of the Split-Spoke SCT wheel features a black center and color molded beadlock detail in either blue or chrome for a realistic look. Fully compatible with factory Traxxas and aftermarket 2.2/3.0 tires, the wheels feature 12mm hexes and the same offset as Slash 2wd rear wheels.
This product was added to our catalog on May 10, 2021
