HRASTE288RC, Hot Racing Traxxas Slash Rear Light Weight CV Splined Drive Shaft (2) This is a set of Hot Racing Traxxas Slash Rear Light Weight CV Splined Drive Shafts, intended for use with the Traxxas electric Stampede and Rustler models. This is an optional upgrade heavy duty splined star drive axle kit. Features: CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum construction Replaces factory plastic drive axles Hard Black Anodized Aluminum Slider Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement Design eliminated CV pin setscrew Hardened S2 Spring steel wheel shaft #45 Steel is black finish S2 spring in Brown finish Rubber dust boot to keep the Splined Drive for maximum protection against the elements Replaces Traxxas TRA1951 half shafts, TRA2753X stub axles, and TRA4628 output yokes Specifications: Approximate overall collapsed length: 109mm Includes: (2) Rear Cv Splined Drive Shaft spline CVD shaft assemblies (2) M4x2.5x11mm screw shafts Fits: Traxxas Rustler 2wd Traxxas Stampede 2wd This product was added to our catalog on December 16, 2021

Read more less

Product Details Whether it is loose or hard-packed dirt, sand, snow, street or gravel the Trencher LP 2.8" tire is up to the task. The Trencher tread was designed to have ultimate traction combined with long-lasting durability. Fits:  Stampede® 2wd Stampede® 4x4 Rustler® 2wd Rustler® 4x4 JATO® Rear Key Features Ridiculous Amounts of Traction and Side-to-Side Stability Low Profile Tire Size That is Perfect for the Rustler® Over-sized Tread is Second-to-None in Durability and Longevity Removable Hexes Allow you to Change Wheel Offsets on the Fly Great for Sand, Snow, Street, Gravel and Loose or Hard Packed Dirt In The Box Pre-mounted Trencher LP 2.8" Tires on Raid Black 6x30 Removable Hex Wheels (2 pcs) 6x30 to 12mm Hex Adapters (Narrow & Wide) (2 pcs of each) M3 x 12mm long SHCS hardware (12 pcs)

Read more less

RPM70812, RPM Traxxas Rustler Rear Bumper (Black)This product was added to our catalog on December 16, 2021

Read more less

RPM73752, Front Bulkhead, Black: TRA 2WD Product Details Key Features Fits Traxxas 2-Wheel drive 1/10 vehicles Made from RPM's trademarked blend of incredibly strong nylons RPM's industry-leading limited lifetime breakage warranty Available in different colors COMPATIBILITY Traxxas Bandit Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Sport Traxxas Nitro Stampede Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd Overview One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: Fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac). It does not fit the 4x4 versions of any of these vehicles. * Weight comparison is based off of the stock bulkhead versus the RPM Front Bulkhead without the dust plate installed. Product Specifications Material Nylon Scale 1/10

Read more less

TFE2186, FastEddy Traxxas Rustler XL-5 Sealed Bearing Kit This product was added to our catalog on December 16, 2021

Read more less

TRA2753X, Traxxas Rear Stub Axles (2) Replacement part for these models: Traxxas Bandit Traxxas Nitro Rustler Traxxas Nitro Sport Traxxas Nitro Stampede Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd This product was added to our catalog on May 7, 2021

Read more less

TRA3638, Traxxas Rear Shock Tower Replacement part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Ford® F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede® This product was added to our catalog on September 7, 2021

Read more less

TRA3677, Traxxas Wheelie Bar Mount (Black) This is a replacement Traxxas Wheelie Bar Mount, and is intended for use with the Traxxas 2wd models like the Slash, Bandit, Rustler and Stampede. This product was added to our catalog on September 7, 2021

Read more less

TRA3678, Traxxas Wheelie Bar Assembly (Black) This is a replacement wheelie bar assembly from Traxxas. This wheelie bar mounts to the rear of the car to prevent if from flipping over backwards during hard acceleration. The patented Traxxas adjustable wheelie bar features four-position adjustment to control the height of your wheelies. Durable composite nylon construction offers an extra level of protection for the motor and transmission case. Installation is quick and easy while optional aluminum wheels with rubber tires (5186 and 5186A) provide extra style and increased performance (sold separately). Replacement part for these models: Stampede® VXL Accessory part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Ford® F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® This product was added to our catalog on September 7, 2021

Read more less

TRA3736, Traxxas Steering Blocks (2) (VXL) This is a set of two replacement steering blocks from Traxxas. These steering blocks mount the the front uprights, and support the front axles. This product was added to our catalog on May 29, 2021

Read more less

TRA3752, Traxxas Stub Axle Carriers (2) (VXL) (requires 5x11x4mm bearings) Replacement part for these models: Bandit® VXL BIGFOOT® No. 1 Officially Licensed Replica Drag Slash Ford® F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede® Accessory part for these models: Bandit® This product was added to our catalog on September 7, 2021

Read more less

TRA6773X, Traxxas Rustler 4x4 Talon EXT 2.8" Pre-Mounted Tires w/RXT Wheels (2) (Black Chrome) Tires & wheels, assembled, glued (2.8") (RXT black chrome wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated) High-performance all-terrain Talon EXT tires dig into dirt and grass for outstanding 4X4 traction. The EXT’s tire compound provides extra durability on pavement with a unique design that resists “ballooning” at high speeds. Talon EXT tires come mounted and pre-glued on tough RXT black chrome wheels for no-hassle, out-of-the-box bolt-on traction. TSM®-rated for high-speed applications. Fits 12 mm hex, 4WD front or rear, 2WD electric front only. Replacement part for these models: Rustler® 4X4 VXL Accessory part for these models: Rustler® 4X4 Rustler® VXL Rustler® This product was added to our catalog on September 7, 2021

Read more less