37054-8, Traxxas Rustler 1/10 RTR Stadium Truck 2wd w/XL-5 ESC, TQ 2.4GHz Radio, Battery & USB-C Charger
The Traxxas Rustler is engineered to command the terrain with its low-slung, broad stance, optimizing stability at high speeds and through tight corners. Its nimble, lightweight chassis and compact wheelbase ensure lightning-quick responsiveness, setting a benchmark of agility among its truck counterparts. Unleashing an impressive 35+ MPH** top speed with it's Titan 12T motor, the Rustler reigns supreme on both dirt tracks and asphalt. Embracing Traxxas' waterproof electronics, this truck fearlessly navigates through puddles, tackles mud, and conquers snowbanks, delivering an adrenaline-fueled experience of power-sliding thrills.
Traxxas wants to make sure that you get out and enjoy the benefits of this truck as soon as possible. This is why Traxxas includes a 3000mAh Nickle-Metal-Hydride (NiMH) battery and a convenient USB-C charger in the box. The battery pack is able to deliver ample run time with the charger being an easy way to get things topped off to get back out and continue bashing. This Rustler also includes the Traxxas TQ 2.4GHz Radio System to give drivers an excellent range to drive their stadium truck.
This out-of-the-box and "Ready-to-Race" powerhouse encapsulates Traxxas' signature blend of innovation and durability, pushing the boundaries of off-road excitement like never before!
CHARGER NOTE: Power adapter and cable sold separately. For maximum charging rate, please use the Traxxas Power Adapter and Traxxas Charging Cable (TRA2912 & TRA2916 - both sold separately).
Features:
ProGraphix Pre-Painted Body
Includes Battery and Charger
4-Amp USB-C Fast Charger
Traxxas 3000mAh 8.4V 7-cell NiMH Battery with iD Connector
TQ 2.4GHz Radio System
Waterproof Electronics for All-Weather Driving Excitement!
35+ mph* Top Speed!
Brushless-Ready Metal Gear Magnum 272 Transmission
Specifications:
Scale:1/10
Length: 17.5" (445mm)
Width: 12.25" (311mm)
Wheelbase: 11.375" (289mm)
Weight: 59.6oz (1.69kg)
Power Source: Electric
Input Voltage:
6-cells (7.2V) NiMH
2S (7.4V) LiPo
Drive: RWD
Gear Pitch: 48P
Gear Ratio: 2.72 (final drive: 12.58)
Assembly Level: Ready To Run
Includes:
(1) Rustler 1/10 RTR Stadium Truck
(1) 3000mAh 8.4V 7-cell NiMH battery with Traxxas iD Connector
(1) USB-C Battery Charger
(1) User Manual
Needed to Complete:
(4) (AA) Batteries for Transmitter
This product was added to our catalog on September 27, 2023
37254-8, Traxxas Rustler HD 1/10 RTR 2WD Electric Stadium Truck (Green) w/XL-5 ESC, TQ 2.4GHz Radio, Battery & USB-C Charger (NEW)
The Traxxas Rustler HD 1/10 RTR 2WD Electric Stadium Truck introduces a new era of performance with its heavy-duty upgrades and improvements. Factory-installed Extreme Heavy Duty suspension components ensure next-level durability, allowing the Rustler to withstand the most punishing environments. Key components like rear axle carriers, C-hubs, and steering blocks are fortified with additional material to endure brutal impacts without compromising performance. This stadium truck features a clipless body mounting system, which employs heavy-duty latches for secure attachment while maintaining quick-release functionality for fast battery swaps. Reinforced panels on the clipless body prevent pull-through damage, ensuring long-lasting integrity during high-speed action.
Clipless Stadium Truck Body
Pre-painted body with applied decals
Aggressive, aerodynamic body with rear wing
Body reinforcements to prevent pull-through damage
Holds tight for intense action
Quick and easy removal
Smooth appearance with no body posts or clips
High-Performance Waterproof XL-5™ Electronic Speed Control
Innovative waterproof design
Three drive profiles
Sport Mode - forward / brake / reverse
Race Mode - forward / brake
Training Mode™ - 50% forward / brake / 50% reverse (patented)
Traxxas EZ-Set® one-button setup
LiPo and NiMH compatible with two-stage low-voltage detection
Titan 550 Motor
Powerful Titan® 12T 550 brushed motor with internal cooling fan
Oversized armature for big torque and increased power handling
Virtually maintenance-free operation
Extreme Heavy Duty Parts Installed
Strengthened C-hubs, axle carriers, and steering blocks
HD suspension arms
TQ™ 2.4 GHz 2-Channel Radio System
Ergonomic transmitter with internal antenna
Traxxas 6519 3-channel micro receiver with fail-safe security
Sealed watertight receiver box keeps the receiver dry
Includes Battery and USB-C Charger
4-amp USB-C fast charger
3000 mAh Traxxas 7-cell 8.4 V NiMH battery with iD®
Easy Access Battery Compartment
Accepts NiMH 6 and 7-cell flat packs and hump packs
Accepts 2-cell LiPo batteries
Transmission and Driveline
Brushless-ready Magnum 272™ metal-gear transmission
Torque-Control™ slipper clutch system
Planetary gear differential with steel ring gear
Sealed gearbox protects the transmission with beefed up motor guard
External gear cover with easy clutch access
Heavy-duty telescoping U-joint driveshafts and yokes
Tough Fiber-Composite Monocoque Chassis
Wide, low-profile design for increased stability
Steering
High-torque waterproof Traxxas 2056 steering servo
Spring-loaded servo saver helps protect against impacts
Suspension
Durable solid camber links eliminate the need for adjustment
Captured rod ends won't pop off
Springs and Shocks
Fully adjustable oil-filled Ultra Shocks™ with X-ring technology
White powder-coated springs
Wheels and Tires
Pre-glued Alias® step-pin rear tires and ribbed front tires with performance foam inserts
2.8″ black six-spoke wheels with chrome beadlock trim
Precision Hex Hardware
This product was added to our catalog on September 6, 2024
HRASTE288RC, Hot Racing Traxxas Slash Rear Light Weight CV Splined Drive Shaft (2)
This is a set of Hot Racing Traxxas Slash Rear Light Weight CV Splined Drive Shafts, intended for use with the Traxxas electric Stampede and Rustler models. This is an optional upgrade heavy duty splined star drive axle kit.
Features:
CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum construction
Replaces factory plastic drive axles
Hard Black Anodized Aluminum Slider
Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
Design eliminated CV pin setscrew
Hardened S2 Spring steel wheel shaft
#45 Steel is black finish S2 spring in Brown finish
Rubber dust boot to keep the Splined Drive for maximum protection against the elements
Replaces Traxxas TRA1951 half shafts, TRA2753X stub axles, and TRA4628 output yokes
Specifications:
Approximate overall collapsed length: 109mm
Includes:
(2) Rear Cv Splined Drive Shaft spline CVD shaft assemblies
(2) M4x2.5x11mm screw shafts
Fits:
Traxxas Rustler 2wd
Traxxas Stampede 2wd
This product was added to our catalog on December 16, 2021
HRATRX15GPL06, Hot Racing Traxxas Power Up Gear Adapter (Long)
The Hot Racing Traxxas Power Up Gear Adapter fits the 1/10 Traxxas Bandit, Jato 3.3, Rustler, Slash 2WD, and Stampede 2WD.
Features:
Eliminates the transmission slipper assembly to transmit all power to wheels without slip
Lighter rotating mass for faster acceleration
Great for stock off road classes or oval racing!
CNC machined 6061 aluminum, anodized blue
NOTE:
Please note the slipper function is eliminated, placing additional strain on drivetrain components which may lead to increased wear
Fits vehicles using Traxxas 5556 slipper. Completely replaces slipper assembly, including pressure plates and slipper pads
Fits: Bandit, Jato 3.3, Rally, Rustler, Slash 2WD and Stampede 2WD
This product was added to our catalog on March 6, 2021
Product Details
Whether it is loose or hard-packed dirt, sand, snow, street or gravel the Trencher LP 2.8" tire is up to the task. The Trencher tread was designed to have ultimate traction combined with long-lasting durability.
Fits:
Stampede® 2wd
Stampede® 4x4
Rustler® 2wd
Rustler® 4x4
JATO® Rear
Key Features
Ridiculous Amounts of Traction and Side-to-Side Stability
Low Profile Tire Size That is Perfect for the Rustler®
Over-sized Tread is Second-to-None in Durability and Longevity
Removable Hexes Allow you to Change Wheel Offsets on the Fly
Great for Sand, Snow, Street, Gravel and Loose or Hard Packed Dirt
In The Box
Pre-mounted Trencher LP 2.8" Tires on Raid Black 6x30 Removable Hex Wheels (2 pcs)
6x30 to 12mm Hex Adapters (Narrow & Wide) (2 pcs of each)
M3 x 12mm long SHCS hardware (12 pcs)
RPM70662, RPM Wide Front A-Arms (2) (Black) Traxxas Rustler Stampede
This is a pair of optional RPM Wide Front A-Arms. Are you looking to add some serious stability to your electric Rustler or Stampede 2wd? Look no further! RPM wide front A-arms will push your front wheels out there almost 1-1/4” (31.8mm) of total width for some serious stability-adding performance. These Wide Front A-arms extend the front width by exactly the difference in offset between the front and rear wheels. All you need to do is get a second set of “front” wheels and bolt them to the rear to align the front and rear tires and you’re good to go! No expensive prefabricated widening kits or time-consuming conversions. It’s as easy as replacing your stock A-arms with RPM wide A-arms, swap the turnbuckles and camber links for longer versions (not included see “NOTE:” below) and bolt on a set of rear wheels! It couldn’t be easier. Available in black, blue or green.You already know RPM A-arms are the toughest molded a-arms in the R/C industry (gram for gram, stronger than aluminum as well)! Each RPM A-arm is molded from RPM's trademark blend of nearly indestructible nylons and backed by their world-renowned limited lifetime warranty against breakage. RPM durability combined with RPM affordability; there’s no way you can go wrong!
NOTE: RPM wide A-arms for the Traxxas Rustler & Stampede 2wd fit all electric versions of these models, although additional parts (not included) are required for completion as listed here:
Rustler XL-5: 1 – RPM Screw Kit RPM70680, 1 – Traxxas TRA3643 (long camber links), 1 – Traxxas TRA3645 (long toe links) & 1 pair of compatible front wheels (used to replace rear wheels).
Stampede XL-5: 1 – RPM Screw Kit RPM70680, 1 – Traxxas TRA3643 (long camber links), 1 – Traxxas TRA2338 (96mm long toe links) & 1 pair of compatible front wheels (used to replace rear wheels).
Rustler VXL: 1 – Traxxas TRA3643 (long camber links), 1 – Traxxas TRA3645 (long toe links) & 1 pair of compatible front wheels (used to replace rear wheels).
Stampede VXL: 1 – Traxxas TRA5138 (long toe links) & 1 pair of compatible front wheels (used to replace rear wheels).
This product was added to our catalog on April 9, 2015
This product was added to our catalog on December 16, 2021
RPM73754, RPM Traxxas 2WD Front Bulkhead (Green)
The RPM Traxxas 2WD Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. RPM engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments.
RPM also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. The RPM version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. RPM also included a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck.
Each RPM Front Bulkhead is built from RPM's bulletproof blend of engineering grade nylons, made right here in the USA and comes with their limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM!
Fits:
Traxxas Bandit
Traxxas Nitro Rustler
Traxxas Nitro Slash
Traxxas Nitro Sport
Traxxas Nitro Stampede
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
NOTE:
RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas TRA2530 & TRA2530A.
This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac). It is not compatible with the 4×4 versions of any of these vehicles.
Weight comparison is based off of the stock bulkhead versus the RPM Front Bulkhead without the dust plate installed.
This product was added to our catalog on July 11, 2021
RPM80182, RPM Traxxas Rustler/Stampede Rear A-Arms (Black) (2)
A set of optional RPM Rear A-Arms, and are intended for use with the Traxxas Electric Rustler and Stampede trucks.
This product was added to our catalog on December 16, 2021
RPM80242, RPM Front A-Arms (Black) (Rustler, Stampede & Slash) (2)
This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd. These arms are built to withstand abuse. Plus, they shave some unwanted unsprung weight as well! RPM Front A-arms are nearly 25% lighter than stock versions of the same A-arms, and are backed by RPM's world-renowned breakage warranty. Additionally, RPM has increased clearance areas in the outer portion of the A-arms to allow increased droop travel when used in conjunction with RPM oversized bearing carriers (RPM80372 & RPM80382).
RPM front A-arms for the Electric versions of the Traxxas Slash, Rustler & Stampede are sold in pairs and are available in black, green, blue and red. These A-arms are molded with what is fast becoming an RPM trademark design of angled leading and trailing edges to reduce frontal edge mass and improve the a-arm’s ability to ride up and over tall obstacles instead of slamming into them. RPM A-arms are extremely rigid for superior ride and stability over the roughest tracks and terrain.
Features:
Nearly 25% lighter than stock
Stronger material resists flexing and breaking
Increased clearance in outer area of arms
This product was added to our catalog on December 16, 2021
RPM80372, RPM Front Bearing Carrier Set (Black) (2) (Slash, Bandit, Rustler, Stampede)
RPM Traxxas Steering Blocks are the perfect solution for worn bushings and weak 5x8mm bearings. Give your electric the same bearing the nitro trucks come stock with - 5x11mm! The oversize bearings have higher load ratings than a 5x8mm bearing and will significantly increase the time between maintenance. In addition, these oversized bearing carriers are so strong, RPM guarantee that they won't ever break! When used in conjunction with the RPM Rear Bearing Carriers (RPM80382), you'll never have to worry about worn-out bushings or blown wheel bearings again!
NOTE: 5x11x4mm bearings are not included. 4 bearings are required.
Features:
Fits the 2WD Slash, Nitro Slash, Bandit, Electric Rustler and Electric Stampede
Replaces stock Traxxas #3736
5x11x4mm size bearings not included
Available in Black and Blue
This product was added to our catalog on October 13, 2021
RPM80375, Front Bearing Carrier, Blue: TRA 2WD
Product Details
Key Features
Fits the 2WD Slash, Nitro Slash, Electric Rustler and Electric Stampede
Replaces stock Traxxas #3736
5x11x4mm size bearings not included
Available in Black and Blue
Overview
Traxxas Bandit
Traxxas Nitro Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
RPM oversized bearing carriers are the perfect solution for worn bushings and weak 5 x 8mm. bearings! Give your electric the same performance the nitro trucks come stock with. 5 x 11mm. bearings have higher load ratings than a 5 x 8mm. bearing and will significantly increase the time between maintenance periods. In addition, our bearing carriers are so strong; we guarantee that they won't ever break! Molded in black. When used in conjunction with our #80382 Rear Bearing Carriers, you'll never have to worry about worn-out bushings or blown wheel bearings again!
Tech Notes: 5x11x4mm. bearings are not included with these kits (4 bearings are needed for each kit).
Product Specifications
Material
Plastic
Refinement Color
Blue
This product was added to our catalog on December 16, 2021
RPM80382, Rear Bearing Carriers, Black: RU, ST, BA, SLH
Product Details
Key Features
Strong and durable
Overview
Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM’s front and rear bearing carriers allow e-Rustler, e-Stampede, Slash & Bandit owners to install massive 5mm x 11mm bearings (not included) that will not only improve performance, but will increase the time interval between maintenance periods. In addition, our front and rear bearing carriers are molded in black from RPM’s killer blend of bulletproof nylons and are guaranteed not to break!
Product Specifications
Refinement Color
Black
Material
Plastic
RPM80712, Caster Blocks, for Traxxas Electric Slash, Stampede, Rustler, Nitro Slash, Black
Product Details
Traxxas Nitro Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
Overview
RPM Caster Blocks for the Traxxas Slash, e-Rustler & e-Stampede are the final link in for a complete, bulletproof front suspension from RPM for these trucks. RPM Caster Blocks are redesigned to slim down unnecessary bulk while improving strength and durability in this heavily impacted area. These are stock replacement items. No additional parts or modifications are necessary to mount a set to a vehicle.
RPM Caster Blocks are molded in our trademark blend of ultra durable and super strong nylons and backed by the best breakage warranty in the R/C industry. Each package contains one left side and one right side caster block.
Tech Notes: RPM #80715 Caster Blocks replace Traxxas stock #3632 Caster Blocks. RPM Caster Blocks retain stock Rustler & Stampede 30 degree caster settings. These Caster Blocks will not work on nitro versions of the Rustler & Stampede nor 4wd versions of the Stampede or Slash.
Product Specifications
Refinement Color
Black
Material
Plastic
RPM80832, R Shock Tower,Black: RU, ST, BA, SLH
Product Details
Overview
RPM rear shock towers for the electric versions of the Stampede, Rustler & Bandit as well as the Slash were designed with one thing in mind – rugged durability. Once again, we’ve exceeded our own expectations with this shock tower. While we’ve maintained all stock geometry on these shock towers, we’ve beefed them up in all the right places to eliminate annoying rear shock tower breakage. Our version of this shock tower uses an I-Beam construction that improves durability and rigidity as well. At the base of the shock tower, we’ve improved the screws’ head clearance of the bulkhead mounting screws to eliminate the bind normally associated with the stock rear shock tower. All these design elements combine to create the ultimate lightweight, bulletproof rear shock tower for the electric versions of the Rustler & Stampede.
RPM rear shock towers for the Traxxas Slash, Electric Stampede, Electric Rustler & Bandit are molded in black and are backed by our famous breakage warranty. These towers are direct replacement parts for ease of installation.
Product Specifications
Part Type
Shocks & Shock Parts
Refinement Color
Black
Material
Plastic
TFE1168, Traxxas Rustler Sealed Bearing Kit
This is the FastEddy Sealed Bearing Kit for the Traxxas Rustler. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(15) 5x11x4
(4) 5x8x2.5
NOTE:
Photo of unpackaged bearings shows random bearings and is not representative of what you will receive.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. FastEddy does their best to keep the kits updated. If you find a variation or mistake in this kit, please contact us.
This product was added to our catalog on December 16, 2021
TFE702, FastEddy Traxxas Rustler VXL Bearing Kit
Team FastEddy Traxxas Rustler VXL Bearing Kit. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(4) 5x8x2.5
(15) 5x11x4
NOTE:
Photo of unpackaged bearings shows random bearings and is not representative of what you will receive.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. FastEddy does their best to keep the kits updated. If you find a variation or mistake in this kit, please contact us.
This product was added to our catalog on December 16, 2021
TRA1951R, Traxxas Heavy Duty Steel CV Rear Driveshaft (2)
This is a pack of two Traxxas Heavy Duty Steel CV Rear Driveshafts. Traxxas Steel Constant Velocity Shafts deliver the ultimate in torque handling and efficient power transfer with gleaming nickel-plated shafts, combined with black silicone boots that add a custom look with improved durability. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are captured so there is less worry about losing a pin.
This product was added to our catalog on April 13, 20213
TRA3631, Traxxas HD Cold Weather Front Suspension Arm Set (Black)
This is an optional Traxxas HD Cold Weather Front Suspension Arm Set, a heavy duty set of front suspension arms for for 2WD Slash, Stampede, and Rustler feature an updated design which incorporates the latest proprietary composite material, available in multiple colors. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it off a curb, or preparing for the next speed run, these arms were built for extreme wear.
This product was added to our catalog on April 21, 2021
TRA3636T, Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4)
This product was added to our catalog on September 7, 2021
TRA3652A, Traxxas Aluminum Stub Axle Carrier (Blue) (2)
This is a set of two optional blue aluminum stub axle carriers with bearings from Traxxas. These stub axle carriers mount to the rear control arms, and support the rear axles.
Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 aluminum, larger 5x11mm ball bearings are included for smooth performance, reduced friction, and long life. Rubber seals on the bearings make them virtually maintenance free. Easy, bolt-on good looks in red, blue or green anodizing.
Traxxas Bandit
Traxxas Drag Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
This product was added to our catalog on September 7, 2021
TRA3652G, Traxxas Aluminum Stub Axle Carriers (Green) (2)
This is a set of two optional green Aluminum Stub Axle Carriers with bearings from Traxxas. These stub axle carriers mount to the rear control arms, and support the rear axles. Traxxas aluminum accessories improve the appearance, ruggedness, and control of the officially-licensed Grave Digger model, and can also be used on Stampede, Rustler, Slash, and Bandit. In addition to the durability and precision of the machined billet 6061-T6 aluminum, larger 5x11mm ball bearings are included for smooth performance, reduced friction, and long life. Rubber seals on the bearings make them virtually maintenance free. Easy, bolt-on good looks in red, blue or green anodizing. Simple bolt-on installation that anyone can perform inspires confidence for future upgrades.
Features:
High-strength 6061-T6 aluminum construction
Vivid green-anodized finish
Easy bolt-on installation
Traxxas Quality and Precision
Also Fits Rustler, Stampede, Slash, and Bandit
This product was added to our catalog on April 6, 2021
TRA3652X, Traxxas Aluminum Stub Axle Carriers (Red) (4)
This is a set of two optional blue aluminum stub axle carriers with bearings from Traxxas. These stub axle carriers mount to the rear control arms, and support the rear axles.
Traxxas Bandit
Traxxas Drag Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
This product was added to our catalog on September 7, 2021
TRA3677, Traxxas Wheelie Bar Mount (Black)
This is a replacement Traxxas Wheelie Bar Mount, and is intended for use with the Traxxas 2wd models like the Slash, Bandit, Rustler and Stampede.
This product was added to our catalog on September 7, 2021
TRA3678, Traxxas Wheelie Bar Assembly (Black)
This is a replacement wheelie bar assembly from Traxxas. This wheelie bar mounts to the rear of the car to prevent if from flipping over backwards during hard acceleration.
The patented Traxxas adjustable wheelie bar features four-position adjustment to control the height of your wheelies. Durable composite nylon construction offers an extra level of protection for the motor and transmission case. Installation is quick and easy while optional aluminum wheels with rubber tires (5186 and 5186A) provide extra style and increased performance (sold separately).
Replacement part for these models:
Stampede® VXL
Accessory part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Ford® F-150 Raptor
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Stampede®
This product was added to our catalog on September 7, 2021
TRA3695, Traxxas Slash Pro-Built Complete Transmission (fits 1/10-scale 2WD Rustler, Bandit, Stampede, Slash)
This product was added to our catalog on May 7, 2021
TRA3725X, Traxxas Battery Expansion Kit (Rustler/Bandit/Stampede)
The battery expansion kit from Traxxas allows the installation of larger format battery packs into the Velineon® powered Rustler VXL, Bandit VXL, and Stampede VXL. The package includes hardware to raise the electronic speed control mount and battery posts allowing clearance for taller battery packs.
This product was added to our catalog on May 7, 2021
TRA3736, Traxxas Steering Blocks (2) (VXL)
This is a set of two replacement steering blocks from Traxxas. These steering blocks mount the the front uprights, and support the front axles.
This product was added to our catalog on May 29, 2021
TRA3739, Traxxas Screw Pin Set
This is a replacement suspension screw pin set from Traxxas. These suspension screw pins are used where the suspension arms pivot.
Fits:
Traxxas Bandit
Traxxas Hoss
Traxxas Nitro Slash
Traxxas Rally
Traxxas Rustler 2wd
Traxxas Rustler 4x4
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 2wd
This product was added to our catalog on April 12, 2021
TRA3740, Traxxas Suspension King Pins w/ E-Clips (2)
This is a set of two replacement suspension king pins with e-clips from Traxxas.
This product was added to our catalog on April 29, 2021
TRA3745, Traxxas 59mm Toe Link Turnbuckle (2) (VXL)
This is a pack of two replacement Traxxas 59mm Toe Link Turnbuckles. These adjustable turnbuckles come assembled with installed rod ends and pillow balls.
Traxxas Drag Slash
Traxxas Nitro Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
This product was added to our catalog on September 7, 2021
TRA3770A, Traxxas Alias Rear Tires w/All-Star Wheels (2) (Black Chrome) (Standard)
This is a set of two premounted Traxxas Alias Rear tires, mounted on All Star wheels. Choose from Black Chrome or Chrome finish.
This product was added to our catalog on September 7, 2021
Tires & wheels, assembled, glued (2.8') (All-Star chrome wheels, ribbed tires, foam inserts) (electric front) (2)
TRA3771, T&W ALL STAR CHRM 2.8/RIBBED
This product was added to our catalog on September 7, 2021
TRA3771A, T&W ALL STAR BLK CHRM/RIBBD
All-Star wheels redefine looks and convention by combining structural strength and futuristic stylings. These wheels mounted and pre-glued with Alias® ribbed tires for no-hassle, out-of-the-box bolt-on installation. Available with a brilliant mirror-chrome or black-chrome finish.
Replacement part for these models:
Rustler® VXL
Accessory part for these models:
Rustler®
This product was added to our catalog on September 7, 2021
TRA3787, Traxxas 2WD Hardware Kit
Give your Traxxas model a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware. Individual compartments keep everything organized with a handy label to measure and identify the parts.
This product was added to our catalog on October 4, 2023
TRA3789, 2WD VXL Hardware Kit
Give your Traxxas model a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware. Individual compartments keep everything organized with a handy label to measure and identify the parts.
This product was added to our catalog on October 4, 2023
TRA3794, Traxxas, LED LIGHT SET 2WD RUST/BNDT
LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits 2WD Rustler® or Bandit®)
Product Information:
TRA3794, Traxxas, LED LIGHT SET 2WD RUST/BNDT
Traxxas Vehicles, Parts & Accessories
Traxxas
UPC: 020334379405
This product was added to our catalog or updated on April 4, 2022
