EXO2131, Exotek Slash 4X4 HD Steel Front CVD Set
Exotek Slash 4X4 HD Steel Front CVD Set. Designed to be an optional upgrade for the Traxxas Slash 4X4, Rally and Stampede 4X4 this CVD set is an excellent way to add durability to your vehicle. Constructed from high quality steel insures that this set will be reliable over the long run even with high power brushless systems. The updated differential cups use two set screws each to give ultra secure and reliable mounting.NOTE: Requires blue thread lock and cvd oil or grease (not included).Includes:
(2) 72mm CVD Axle Assemblies
(2) Differential Outdrives
(6) Set Screws
This product was added to our catalog on January 19, 2022
EXO2132, Exotek Slash 4X4/2WD HD Steel Rear CVD Set
Exotek Slash 4X4/2WD HD Steel Rear CVD Set. Designed to be an optional upgrade for the Traxxas Slash 4X4, Slash 2WD, Rally and Stampede 4X4 this CVD set is an excellent way to add durability to your vehicle. Constructed from high quality steel insures that this set will be reliable over the long run even with high power brushless systems. The updated differential cups use two set screws each to give ultra secure and reliable mounting.
NOTE: Requires blue thread lock and cvd oil or grease (not included).
Includes:
(2) 76mm CVD Axle Assemblies
(2) Differential Outdrives
(6) Set Screws
This product was added to our catalog on May 19, 2021
HRAMXX125, Hot Racing Traxxas Maxx Differential Locker Spool
The Hot Racing Traxxas Maxx Differential Locker Spool is a tuning option that eliminates the differential, and creates a solid spool. This can be used in the front or rear and is recommended for off-road use only.
Features:
Black oxide coated CNC machined steel
Fits front or rear
Recommended for off-road use ONLY
Replaces Traxxas TRA8982 output gears and TRA8981 gears case
Includes:
(1) differential spool shaft
This product was added to our catalog on April 21, 2021
HRANSG3227, Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear w/5mm Bore (27T)
Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear. These pinion gears are an essential upgrade for your UDR. Precision machined hardened steel, combined with a black nitride coating help to make the gear durable, and with the availability of multiple tooth count options you have the gears to tune your ratio for a variety of conditions.
Features:
CNC machined
Hardened steel to increased wear resistance and improve fatigue life
Nitride coating to enhanced hardness and corrosion resistance
5mm Bore
32 pitch
NOTE: 32 standard pitch is the same as 0.8 mod
Includes:
(1) pinion gear
(1) M5x5mm set screw
This product was added to our catalog on December 16, 2021
HRANSG3231, Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear w/5mm Bore (31T)
Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear. These pinion gears are an essential upgrade for your UDR. Precision machined hardened steel, combined with a black nitride coating help to make the gear durable, and with the availability of multiple tooth count options you have the gears to tune your ratio for a variety of conditions.
Features:
CNC machined
Hardened steel to increased wear resistance and improve fatigue life
Nitride coating to enhanced hardness and corrosion resistance
5mm Bore
32 pitch
NOTE: 32 standard pitch is the same as 0.8 mod
Includes:
(1) pinion gear
(1) M5x5mm set screw
This product was added to our catalog on December 16, 2021
HRANSG3234, Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear w/5mm Bore (34T)
Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear. These pinion gears are an essential upgrade for your UDR. Precision machined hardened steel, combined with a black nitride coating help to make the gear durable, and with the availability of multiple tooth count options you have the gears to tune your ratio for a variety of conditions.
Features:
CNC machined
Hardened steel to increased wear resistance and improve fatigue life
Nitride coating to enhanced hardness and corrosion resistance
5mm Bore
32 pitch
NOTE: 32 standard pitch is the same as 0.8 mod
Includes:
(1) pinion gear
(1) M5x5mm set screw
This product was added to our catalog on December 16, 2021
HRASHS88H, Hot Racing Aluminum CNC Heavy Duty Servo Saver w/Heavy Spring Tension (Black)
Hot Racing Aluminum CNC Heavy Duty Servo Saver in Black anodize, with a heavy spring tension.
Features:
CNC 6061-T6 aluminum construction
Black anodized
Multiple inserts to accommodate many different servo splines
Specifications:
Length: 1-1/2 inch (38mm)
Diameter: 1 inch (25mm)
23 Tooth Insert (K): (KO, Sanwa, JR, Airtronics, Spektrum)
24 Tooth Insert (H): (Hitec)
25 Tooth Insert (F): (Futaba, Traxxas, SAVOX, Tactic, some of the new Hitec)
Includes:
(1) servo saver
(1) spline adapters for 23 tooth (KO, Sanwa, JR)
(1) spline adapters for 24 tooth (Hitec)
(1) spline adapters for 25 tooth (Futaba)
This product was added to our catalog on February 12, 2022
HRASLF288RCF, Hot Racing Traxxas Slash 4x4 Front Light Weight Metal CV Splined Drive Shaft
This is a set of Hot Racing Traxxas Slash 4x4 Light Weight Front Metal CV Splined Drive Shafts, an optional upgrade heavy duty splined star drive axle kit for the Traxxas electric Stampede 4X4, Slash 4x4, Rustler 4X4 models.
Features:
CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum construction
Replaces factory plastic drive axles
Hard Black Anodized Aluminum Slider
Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
Design eliminated CV pin setscrew
Hardened S2 Spring steel wheel shaft
#45 Steel is black finish S2 spring in Brown finish
Rubber dust boot to keep the Splined Drive for maximum protection against the elements
Replaces factory plastic Traxxas parts
Specifications:
Approximate overall collapsed length: 112mm
Includes:
(2) Front Cv Splined Drive Shaft spline CVD shaft assemblies
(2) M4x2.5x11mm screw shafts
This product was added to our catalog on December 16, 2021
HRASLF311E, Hot Racing Front/Rear Sway Bar Kit
These are the optional Hot-Racing Front and Rear Sway Bar Kit for the 1/10 scale Traxxas 4x4 Slash, Slash LCG and Rally Vehicles. jxs 06/23/15 ir/jxs
Traxxas Rally
Traxxas Slash 4x4
This product was added to our catalog on December 16, 2021
HRASPN56TF06, Hot Racing Traxxas Spartan Aluminum Adjustable Turn Fins
Hot Racing Traxxas Spartan Aluminum Adjustable Turn Fins will help your boat turn faster, provide better straight-line handling, and will increase overall stability.
Features:
Increases performance and handling
CNC machined aluminum construction
Blue anodized finish
Easy to install
Light weight
Adjustable
Includes:
(2) aluminum turn fins
(2) aluminum turn fin mounting brackets
(2) 3mm lock nuts
(2) socket head cap screws
This product was added to our catalog on March 16, 2021
HRASRVO1025, Hot Racing Traxxas Locker Spool Differential
This is the Hot Racing Traxxas Locker Spool Differential for use with an Traxxas model that uses the TRA5381 differential; including, but not limited to, the E-Maxx, E-Revo, Revo 3.3, Slayer Pro 4X4, and T-Maxx 3.3.
Traxxas E-Revo
Traxxas Revo Nitro
Traxxas Slayer
Traxxas T-Maxx
Features:
Steel shaft and 6061 aluminum gear hub construction
Steel shaft is black oxide finished
Aluminum hub is blue anodized
The locker/spool eliminates differential action for greater acceleration and climbing. It is recommended for off-road use only.
Specifications:
Output shaft diameter: 6mm
Overall length: 45mm
Driveshaft screw pin thru hole: 2.5mm
Weight w/o screws: 16g
Requires:
Recommended to use a removable-type locking adhesive on screws threading into metal
Check hub setscrew for proper torque prior to installation
Ring and pinion gears and factory Traxxas TRA5380/TRA3979 differential housing, TRA5118 8x16x5mm bearing, and TRA5119 10x15x4mm bearing
This product was added to our catalog on December 16, 2021
HRASSLF254D, Hot Racing Steel Center Diff Spur Gear 32P 54T 0.8m
This is the Hot Racing 54 Tooth Center Diff Spur Gear for the 1/10 scale Traxxas Slash 4x4, or Stampede with Center Diff.
Traxxas Slash 4x4
Traxxas TRX-4
This product was added to our catalog on December 16, 2021
HRASTE876, Hot Racing Traxxas 48P Hardened Steel Spur Gear (76T)
Compatibility
Traxxas Bandit
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
Traxxas Telluride 4x4
The Hot Racing Traxxas 48P Hardened Steel Spur Gear is an optional spur gear intended for the Traxxas Bandit, 2WD Slash, Rustler, 2WD Stampede, and Telluride models. The spur gear is available in a variety of tooth count options, please select the specific gear you want from the list above. Package includes one spur gear and mounting hardware.NOTE: Motor temperature should never exceed 180F (under 160 recommended). ESC temperatures should never exceed 160F. Excessive temperatures will shorten the life of the electronics.
Features:
CNC machined and lightened hardened steel construction
Replaces stock nylon spur gear
Black oxide coated gear for durability and corrosion resistance
Red anodized countersunk aluminum washers
High strength hardware
Specifications:
Gear Pitch: 48 pitch
Mounting Holes: 3
Tooth Face width: ~5mm
This product was added to our catalog on February 21, 2022
HRATE1901, Hot Racing Traxxas Slash 2wd Aluminum Multi Mount Caster Blocks (Black)
Traxxas BanditTraxxas Nitro SlashTraxxas Rustler 2wdTraxxas Slash 2wdTraxxas Stampede 2wd
This product was added to our catalog on December 16, 2021
HRATUDR21M01, Hot Racing Traxxas Unlimited Desert Racer Aluminum HD Bearing Steering Knuckles
Hot Racing Traxxas Unlimited Desert Racer Aluminum HD Bearing Steering Knuckles. Features:
CNC machined aluminum, anodized blackHeavy duty rubber sealed oversized bearingsReplaces TRA8552 front steering blocksIncludes:(1) left aluminum axle carrier with(1) right aluminum axle carrier with(2) rubber shielded outer bearings (6x15x5mm)(2) rubber shielded inner bearings (15x24x5mm)
This product was added to our catalog on December 16, 2021
HRATUDR288RC, Hot Racing Unlimited Desert Racer Front Steel CV Splined Drive Shaft (2)
This is a pack of two optional Hot Racing Front Steel CV Splined Drive Shafts for the Traxxas UDR. Hot Racing optional upgrade heavy duty front splined star drive CVD axle kit for the Traxxas Unlimited Desert Racer.
Features:
Completely replaces factory dogbone-style axles from the differential all the way out to the wheel hex
CNC machined #45 hardened carbon steel CVs, drive hub, male slider spline, and stub axle
CNC machined aluminum slider tube
Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
Specifications:
Collapsed length, overall: 154mm
Extended length, overall resulting in zero shaft engagement: 164mm
Collapsed length, wheel pin to outdrive pin: 138mm
Extended length, wheel pin to outdrive pin resulting in zero shaft engagement: 148mm
Weight/pr: 132g
Needed To Complete:
Installation to drive assembly
Reuses drive pins
Recommended to maintain CV joint and shaft spline with grease
Recommended to medium thread lock on screws threading into metal
NOTES: Replaces Traxxas axle parts: TRA8551 (drive cup & screw), TRA8550 (dogbone), TRA8553 (stub axle), TRA8554 (CV joint)
This product was added to our catalog on December 16, 2021
HRATUDR30M01, Hot Racing Traxxas Unlimited Desert Racer Aluminum Multi-Mount Shock Tower
Hot Racing Traxxas Unlimited Desert Racer Aluminum Multi-Mount Shock Tower.
Features:
CNC machined 6061 aluminum rear shock tower
More suspension tuning position
Aluminum components are anodized Black for durability, corrosion resistance, and aesthetics
Replaces stock plastic shock shock tower from TRA8538
High strength steel hardware
This product was added to our catalog on December 16, 2021
HRATUDR4801, Hot Racing Traxxas Unlimited Desert Racer Aluminum Bellcranks
Hot Racing Traxxas Unlimited Desert Racer Aluminum Bellcranks.
Features:
Super-tough, fully adjustable servo saver bell crank
Replaces factory plastic part (TRA8543) for a stronger-than-standard stock steering system
CNC machined aluminum construction
Reuses factory ball bearings for smooth operation
HD servo Heavy and Med saver springs (Chrome is Hard)
Anodized black for durability, corrosion resistance, and aesthetics
This product was added to our catalog on December 16, 2021
HRATUDR55M01, Hot Racing Traxxas Unlimited Desert Racer Aluminum Front Lower Arms (Black)
Hot Racing Traxxas Unlimited Desert Racer Aluminum Front Lower Arms.
Features:
CNC machined 6061-T6 aluminum construction
Patent pending suspension arm ball joint capture design
Black anodizing for durability, corrosion resistance, and great looks
Slim profile gull wing design mantain the stock shock position
Replaces the factory plastic components
EZ Multi-Shock Mount Postiion with one screw
Secondarily-processed machined beveled edges for stand out looks
Replaces Traxxas TRA8533 lower suspension arms
This product was added to our catalog on December 16, 2021
HRAXMX48M06, Hot Racing Traxxas X-Maxx Aluminum Steering Servo Saver Bellcrank
The Hot Racing Aluminum Steering Servo Saver Bellcrank is an adjustable aluminum steering bellcrank and servo saver for the Traxxas X-Maxx.
Features:
Super-tough, fully adjustable servo saver bell crank
Replaces factory plastic for a stronger-than-standard stock steering system
CNC machined aluminum construction
Reuses factory ball bearings for smooth operation
Retains stock double shear design for ultimate reliability
Adjustable servo saver springs for different tension
Two servo saver springs to suit preference. Black (installed) is same as stock Traxxas, silver is stiffer then stock
Anodized blue and black for durability, corrosion resistance, and aesthetics
Includes:
(1) assembled steering bellcrank
(1) aluminum draglink
(1) silver hard stiffness servo saver spring
(1) black medium stiffness servo saver spring
NOTE:
Requires use of the stock bearings and some of the stock hardware
Recommended to use removable-type thread lock on any screws threading into metal
Optional use of a grease lubricant on servo saver cam surfaces can smooth servo saver action and prolong life
Replaces most of Traxxas TRA7746 steering components
Replacement Hot Racing draglink is part number HRAXMX4906
Aluminum servo horn is Hot Racing HRAXMX48A06
This product was added to our catalog on September 6, 2021
KIM381, Kimbrough 48P Traxxas Spur Gear (81T)
Kimbrough Products 48 Pitch Traxxas spur gears were developed for Traxxas 1/10 Electric vehicles. Kimbrough Racing Products Plastic Gears have been used to set all of the unlimited speed records for R/C 1/10 scale electric cars in the U.S., and are used by a majority of the top professional R/C car racers around the world. The best drivers in the world trust Kimbrough gears, so you know you can too!
Kimbrough spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers.
Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model.
NOTE: The use of full width pinion gears is highly recommended.
This product was added to our catalog on May 19, 2021
KIM387, Kimbrough 48P Traxxas Spur Gear (87T)
Kimbrough Products 48 Pitch Traxxas spur gears were developed for Traxxas 1/10 Electric vehicles. Kimbrough Racing Products Plastic Gears have been used to set all of the unlimited speed records for R/C 1/10 scale electric cars in the U.S., and are used by a majority of the top professional R/C car racers around the world. The best drivers in the world trust Kimbrough gears, so you know you can too!Kimbrough spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers.
Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model.
NOTE: The use of full width pinion gears is highly recommended.
This product was added to our catalog on November 18, 2021
PRO635000, Pro-Line PRO-Series 32P Transmission (2WD Slash / Rustler / Stampede)
The Pro-Line PRO-Series 32P Transmission is the ultimate high performance, heavy duty transmission upgrade for the Traxxas Slash 2wd and Electric Stampede 2wd models. This is also a great choice for Slash based street eliminator builds that can benefit from full steel internal gear transmission, oil fillable gear diff, and 32P spur gear in a pre-assembled package.
Features:
32P Spur Gear for Maximum Durability
Racing Style Slipper System
Fully Tunable Oil Fillable Gear Differential (Requires Diff Oil)
Rear Bumper Mount Matches Stock Hole Locations
Blue Anodized Aluminum Motor Mount with Laser Engraved P-L Logo
Pre-Assembled
Heavy Duty Steel Internal Gears for Maximum Durability
Crystal Clear Gear Cover with Rubber Access Plug
This product was added to our catalog on August 12, 2021
PRO636200, Pro-Line Extended Front & Rear Body Mount Kit (Rustler 4X4)
This is the Pro-Line Extended Front and Rear Body Mount Kit with Secure-Loc Caps, for the Traxxas Rustler 4x4. This mount kit includes adjustable body mounts so you can fit different bodies onto your truck while still working with the stock body. Instead of just using the stock body mounting system that always causes your body to pop off and go flying, the Pro-Line Extended Body Mount kit includes a revolutionary screw on body mounting system for a strong and secure mount every time. No more ejected bodies! Just screw down the included setscrew into the body mount, place the O-Ring over the setscrew and mount your body as you normally would, but with the added safety and security.
Features:
Completely Adjustable Body Mounts for Fitting Different Style Bodies on to your Rustler® 4x4
Innovative Screw-on Body Mounting System using Secure-Loc Caps
Never Worry About your Body Popping Off Again!
Still Works with the Stock Body
Long Body Mounts Included
Made from Ultra-Durable Nylon
Includes:
Body Mounts and Posts (Front & Rear)
Mounting Hardware
Compatible With:
Rustler 4x4
This product was added to our catalog on March 15, 2021
RCE1627, Racers Edge Female Traxxas to 4mm Bullets Battery Adapter w/2S XH Balance Plug
This 150mm long Racers Edge Adapter features a Female Traxxas to 4mm Bullets, which allows you to use the Traxxas connector with batteries that feature 4mm bullets.
This product was added to our catalog on March 17, 2021
RPM70795, RPM LaTrax Teton/Rally Front/Rear Chassis & Differential Covers
This is the RPM LaTrax Teton/Rally Front/Rear Chassis and Differential Covers. These tough covers offer the incredible strength that RPM parts are known for. By rerouting the upper chassis plates around the outside of the pivot ball mounts this has allowed RPM to link the pivot ball mount directly into the differential bulge. This creates a much stronger setup along with being combined with RPM's engineering grade materials gives you an excellent boost in strength. Package includes one front chassis cover, one rear chassis cover, one front differential cover and one rear differential cover.
This product was added to our catalog on October 26, 2023
RPM70652, RPM Slash LCG 4x4 & Rally Nerf Bar Set (Black)
This is an optional RPM Slash LCG 4x4 & Rally Nerf Bar Set. The chassis layouts of the 1/10th scale Rally LCG & Slash 4x4 LCG changed the original design of the stock nerf bars, making the RPM80622 & RPM80625 nerf bars unusable. These LCG nerf bars fix that problem and are a direct, perfect fit!
RPM LCG Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to Black Nerf Bars for the 1/10th Rally, LCG Slash 2wd & LCG Slash 4x4. The additional cross bracing optimizes the rigidity while absorbing additional impact energy anything less than RPM would have crumpled under!
RPM Nerf Bars are stock replacement parts and work with all stock Traxxas chassis nerf bars TRA7423. RPM Nerf Bars are proudly made in the USA, molded in either blue or black from our engineering grade nylons and backed by our limited lifetime warranty against breakage.
Features:
Available in Black and Blue
This product was added to our catalog on July 31, 2021
RPM70862, RPM LaTrax Front/Rear Suspension Arm (2)
This is an optional set of two RPM LaTrax Front or Rear Suspension Arms, intended for use with the Traxxas LaTrax Prerunner, Teton or SST kits. These lightweight optional parts are a strong, rigid upgrade for your 1/18th scale Latrax. Features:Sold in pairsLightweight, rigid option over stock partsMade in the USA
This product was added to our catalog on December 16, 2021
RPM70982, RPM Traxxas Sledge Front Bumper & Skid Plate (Black)
RPM Traxxas Sledge Front Bumper and Skid Plate. The RPM Front Bumper and Skid Plate for the Traxxas Sledge is a unique design that works with the Traxxas body mounting mechanism. Traxxas designed the body mounting system to move forward instead of rearward. Because it moves forward by well over 1" (25mm), it severely limits bumper design. However, RPM engineers found a way to incorporate a fully functioning bumper with the Traxxas body mounting system.
RPM eliminated the stock bumper and replaced it with a hinge pin retainer, since realistically, that's all the stock bumper really is. Next, they eliminated the stock skid plate in favor of a wider, longer and more protective skid. Lastly, they bolted a unique bumper to the front of the skid plate. The RPM Front Bumper and Skid Plate for the Traxxas Sledge sits below the body, which allows the body mounting system full range of motion, yet the Sledge finally has some tough, RPM front end protection.
NOTES: The RPM Front Bumper and Skid Plate is designed specifically for the Traxxas Sledge and replaces the bumper and skid plate from stock Traxxas (TRA9535).
This product was added to our catalog on January 27, 2023
RPM73754, RPM Traxxas 2WD Front Bulkhead (Green)
The RPM Traxxas 2WD Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. RPM engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments.
RPM also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. The RPM version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. RPM also included a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck.
Each RPM Front Bulkhead is built from RPM's bulletproof blend of engineering grade nylons, made right here in the USA and comes with their limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM!
Fits:
Traxxas Bandit
Traxxas Nitro Rustler
Traxxas Nitro Slash
Traxxas Nitro Sport
Traxxas Nitro Stampede
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
NOTE:
RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas TRA2530 & TRA2530A.
This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac). It is not compatible with the 4×4 versions of any of these vehicles.
Weight comparison is based off of the stock bulkhead versus the RPM Front Bulkhead without the dust plate installed.
This product was added to our catalog on July 11, 2021
RPM80182, RPM Traxxas Rustler/Stampede Rear A-Arms (Black) (2)
A set of optional RPM Rear A-Arms, and are intended for use with the Traxxas Electric Rustler and Stampede trucks.
This product was added to our catalog on December 16, 2021
RPM80662, RPM Traxxas X-Maxx Oversized Front Axle Carriers w/Bearings (2)
RPM Traxxas X-Maxx Oversized Front Axle Carriers feature increased durability and larger inner bearings. Stock bearings are a mere 20x27x4mm while the oversized bearings RPM uses are gigantic a 20x32x7mm. This delivers a load rating that is nearly 300% higher than the stock bearings while the static load rating is over 300% higher. That’s triple the strength of the stock inner bearings.
Features:
Replaces stock Traxxas TRA7737
Includes gigantic 20x32x7mm inner bearings
Massive steering support ribs for the strongest possible carriers
Outer bearings not included (Stock bearings are used)
Sold in pairs (1 Left/1 Right)
This product was added to our catalog on May 18, 2021
RPM81462, RPM E-Revo 2.0 Front Right Suspension Arm Set (Black)
This is the RPM E-Revo 2.0 Front Right Suspension Arm Set, including the front right upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams!
RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks!
RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage.
Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.
This product was added to our catalog on December 16, 2021
SAMTRX4M-4078-D, Samix Traxxas TRX-4M Defender Brass Wheel Weights (Black) (2) (21g)
Samix TRX-4M Defender Brass Wheel Weights. Constructed from CNC machined brass these weights improve climbing performance and stability by lowering the center of gravity of your TRX-4M. These weights offer an additional 21g of weight each. Package includes two brass wheel weights.NOTE:
Only compatible with standard Traxxas TRX-4M Defender front and rear wheels (TRA9768).
Not compatible with any Samix brake rotor caliper set
This product was added to our catalog on January 30, 2023
TFE1593, Traxxas TRX 3.3 Engine Sealed Bearing Kit
Traxxas Compatible TRX 3.3 Engine Sealed Bearing Kit
(1) Rear 12x21x5
(1) Front 7x17x5
FastEddy Bearings offer the highest quality bearings available. Our engine bearing sets include: (1) Front & (1) Rear engine bearing.We ship the bearings with 2 rubber seals. In many cases depending on your application you may want to remove one or both seals. We recommend that you look at the set you are removing to decide what seal/s to remove.To remove a rubber seal, simply slip a thin sharp knife tip or needle under the edge of the seal and lift up.
This product was added to our catalog on April 12, 2021
TFE7972, FastEddy Traxxas TRX-4M Ford Bronco Bearing Kit
Team FastEddy Traxxas TRX-4M Ford Bronco Bearing Kit. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(8) 3x6x2.5
(4) 3.5x7x2.5 (Metal Shielded)
(4) 4x8x3
(4) 5x8x2.5
(2) 8x12x3.5
This product was added to our catalog on April 12, 2021
TRA10211, Traxxas Body, Maxx Slash® (clear, requires painting)/ window masks/ decal sheet (includes body support, body plastics, latches, & hardware for clipless mounting)
This product was added to our catalog on March 8, 2024
TRA10211-BLUE, Traxxas Body, Maxx Slash®, blue (painted)/ decal sheet (assembled with body support, body plastics, & latches for clipless mounting)
This product was added to our catalog on March 8, 2024
TRA10211-GRN, Traxxas Body, Maxx Slash®, green (painted)/ decal sheet (assembled with body support, body plastics, & latches for clipless mounting)
This product was added to our catalog on March 8, 2024
TRA10211-RED, Traxxas Body, Maxx Slash®, red (painted)/ decal sheet (assembled with body support, body plastics, & latches for clipless mounting)
This product was added to our catalog on March 8, 2024
TRA10211-RNR, Traxxas Body, Maxx Slash®, Rock n' Roll (painted)/ decal sheet (assembled with body support, body plastics, & latches for clipless mounting)
This product was added to our catalog on March 8, 2024
TRA10211R, Traxxas Body, Maxx Slash® (clear, requires painting)/ window masks/ decal sheet (includes body support, body plastics, latches, & hardware for clipless mounting) (heavy duty)
This product was added to our catalog on March 8, 2024
TRA10211X, Traxxas Body, Maxx Slash®, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet (includes body support, body plastics, latches, & hardware for clipless mounting)
This product was added to our catalog on March 8, 2024
TRA10213, Traxxas Body support (fits #10211 body)
Body support (fits #10211 body)
Replacement body support for 10211-series bodies
This item was added to our catalog March 13, 2024
