24254-8, Traxxas Bandit HD w/USB-C
ProGraphix® Painted Body
Pre-painted body with applied decals
Aggressive, aerodynamic body with rear wing
High-Performance Waterproof XL-5™ Electronic Speed Control
Innovative waterproof design
Three drive profiles
Sport Mode - forward / brake / reverse
Race Mode - forward / brake
Training Mode™ - 50% forward / brake / 50% reverse (patented)
Traxxas EZ-Set® one-button setup
LiPo and NiMH compatible with two-stage low-voltage detection
Titan® 550 Motor
Powerful Titan 12T 550 modified motor with internal cooling fan
Oversized armature for big torque and increased power handling
Virtually maintenance-free operation
TQ™ 2.4 GHz 2-Channel Radio System
Ergonomic transmitter with internal antenna
Traxxas 6519 3-channel micro receiver with fail-safe security
Sealed watertight receiver box keeps the receiver dry
Extreme Heavy Duty Parts Installed
Strengthened C-hubs, axle carriers, and steering blocks
HD suspension arms
Includes Battery and Charger
4-amp USB-C fast charger
3000 mAh Traxxas 7-cell 8.4 V NiMH battery with iD®
Tough Fiber-Composite Monocoque Chassis
Wide, low-profile design for increased stability
All electronics securely fastened to chassis
Easy Access Battery Compartment
Accepts 7-cell flat packs and hump packs
Accepts 2-cell LiPo batteries
Transmission and Driveline
Brushless-ready Magnum 272™ metal-gear transmission
Torque-Control™ slipper clutch system
Planetary gear differential with steel ring gear
Sealed gearbox protects the transmission with beefed up motor guard
External gear cover with easy clutch access
Heavy-duty telescoping U-joint driveshafts and yokes
Steering
High-torque waterproof Traxxas 2056 steering servo
High-performance bellcrank system minimizes bump steer
Suspension
Durable solid camber links eliminate the need for adjustment
Captured rod ends won't pop off
Springs and Shocks
Fully adjustable oil-filled Ultra Shocks™ with X-ring technology
White powder-coated springs
Wheels and Tires
Pre-glued Alias® step-pin rear tires and ribbed front tires with performance foam inserts
2.2″ black and chrome multi-spoke wheels
Precision Hex Hardware
This product was added to our catalog on September 6, 2024
EXO1985, Exotek Traxxas Slash/Bandit "Vader" Drag Race Chassis Conversion
TX Vader Drag Chassis Conversion, for the 2wd Slash / Bandit
TX VADER drag chassis conversion set.
Lightweight 'street eliminator' drag chassis conversion set for use with TRAXXAS 2WD SLASH OR BANDITS KITS.
Converts your Slash to be cash race ready for the hot 'Street Eliminator No Prep' race classes springing up around the US.
Provides the legal 13" wheelbase to fit under the hottest new no prep bodies that are on the market.
Based on the excellent handling and proven 22 VADER design.
This pro chassis conversion set features
- Carbon fiber made and machined in USA
- Heavy duty 2.5mm thick chassis and side rail plates
- Centralized servo mounting for improved balance
- Alloy servo mounting block that ties into the side rails for extra rigid and tweak free front chassis setup
- Modular chassis design- allows standard rear motor or optional mid motor gear box placement (see instructions for build notes)
- 6 heavy duty alloy side rail posts
- Pro AE B6 style full ball bearing supported steering rack and crank set
- Includes 25 spline clamping alloy servo horn (25 spline servo required like the Traxxas servo etc.)
- Alloy parts are finished in glossy black with blue chamfers for that factory racing look
- Carbon fiber top bulkhead plate
- Multi position shorty lipo mounting to adjust for wheelie/ no wheelie balance
- 2 level chassis design allows you to lower or raise the center of gravity for stability yet keeps the gear box higher to increase traction and keep the drive axles straighter for higher speeds
- The 2 layer rear chassis also raises the rear roll center which increases the forward launch traction while reducing side to side roll for improved high speed stability.
- Offers multiple weight balance options to maximize grip on the street or on the track
- Includes steel hex hardware (requires high quality metric hex tools, 2.0 & 2.5mm)
- Includes a lipo hold set
- Includes large Exotek logo stickers
- Includes instruction sheet
Other option parts shown not included.
Wheelie bar shown is not included.
Requires assembly. Shown assembled for display purposes only
Also required:
Traxxas 2wd SLASH or BANDIT kit
Traxxas body mount set TRA1914R
Traxxas toe link set TRA3745 or TRA3139A (2 sets needed)
This product was added to our catalog on December 16, 2021
HRATRX15GPL06, Hot Racing Traxxas Power Up Gear Adapter (Long)
The Hot Racing Traxxas Power Up Gear Adapter fits the 1/10 Traxxas Bandit, Jato 3.3, Rustler, Slash 2WD, and Stampede 2WD.
Features:
Eliminates the transmission slipper assembly to transmit all power to wheels without slip
Lighter rotating mass for faster acceleration
Great for stock off road classes or oval racing!
CNC machined 6061 aluminum, anodized blue
NOTE:
Please note the slipper function is eliminated, placing additional strain on drivetrain components which may lead to increased wear
Fits vehicles using Traxxas 5556 slipper. Completely replaces slipper assembly, including pressure plates and slipper pads
Fits: Bandit, Jato 3.3, Rally, Rustler, Slash 2WD and Stampede 2WD
This product was added to our catalog on March 6, 2021
PRM157140, Protoform Chevrolet Corvette C7 1/10 Pro-Mod Short Course Drag Car Body (Clear)
The Protoform Clear Chevrolet Corvette C7 Pro-Mod Short Course Drag Car Body represents Protoforms long heritage with drag racing. This is Protoforms first body dedicated to the fast-growing SC Drag Racing class and will transform your Slash 2WD into a scale 1/4-mile beast with realistic details to give your SC drag car a super unique, race-inspired look.
The C7 Pro-Mod Corvette body is a clean and convenient one piece design that allows any enthusiast to pick and apply their own unique paint scheme. Trim, mask and get creative with this slick drag body.
Note: To create a more scale look, the body is designed with a narrower track width than a traditional SC body and will require some modifications to your 2wd Slash® in order to fit correctly.
Here is the list of modifications needed to fit:
Pro-Line Extended Body Mounts for Slash 2wd Tech tip: install the front mounts upside down to get the nose of the body as low as possible!
Traxxas® Bandit® Front Arms - TRA2531X
Traxxas® Bandit® Rear Arms - TRA2750R
Traxxas® Bandit® Front Caster Blocks - TRA2432
Traxxas® Bandit® Steering Blocks - TRA3636
Traxxas® Bandit® Axles - TRA2437
Traxxas® King Pins - TRA3740
Traxxas® Front Camber Turnbuckles - TRA2444
Traxxas® Rear Turnbuckles - TRA2443
Traxxas® Toe Link Turnbuckles - TRA2445
Shorten Rear Drive Shafts
Remove Front Bumper
Features:
Modern, sleek Pro-Mod styling
Incredible scale details
Officially-licensed by General Motors
1-piece design
Made in the USA from durable polycarbonate
Specifications:
Length: 25.5" (647mm)
Front Width: 11.125" (282mm)
Height: 11.25" (285mm)
Wheelbase: 13.2" (335mm)
Compatible with: Slash® 2wd Modified into a narrow Pro-Mod Drag Car
Includes:
(1) Clear Chevy® Corvette™ C7 Pro-Mod Body
(1) Detailed Decal sheet
Paint-then-peel over spray film & window masks
This product was added to our catalog on August 28, 2021
RPM73282, Rear Heavy Duty A-Arms, Black: Bandit
Accessory part for these models:
Traxxas Bandit®
This product was added to our catalog on September 7, 2021
RPM73754, RPM Traxxas 2WD Front Bulkhead (Green)
The RPM Traxxas 2WD Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. RPM engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments.
RPM also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. The RPM version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. RPM also included a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck.
Each RPM Front Bulkhead is built from RPM's bulletproof blend of engineering grade nylons, made right here in the USA and comes with their limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM!
Fits:
Traxxas Bandit
Traxxas Nitro Rustler
Traxxas Nitro Slash
Traxxas Nitro Sport
Traxxas Nitro Stampede
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
NOTE:
RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas TRA2530 & TRA2530A.
This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac). It is not compatible with the 4×4 versions of any of these vehicles.
Weight comparison is based off of the stock bulkhead versus the RPM Front Bulkhead without the dust plate installed.
This product was added to our catalog on July 11, 2021
RPM80372, RPM Front Bearing Carrier Set (Black) (2) (Slash, Bandit, Rustler, Stampede)
RPM Traxxas Steering Blocks are the perfect solution for worn bushings and weak 5x8mm bearings. Give your electric the same bearing the nitro trucks come stock with - 5x11mm! The oversize bearings have higher load ratings than a 5x8mm bearing and will significantly increase the time between maintenance. In addition, these oversized bearing carriers are so strong, RPM guarantee that they won't ever break! When used in conjunction with the RPM Rear Bearing Carriers (RPM80382), you'll never have to worry about worn-out bushings or blown wheel bearings again!
NOTE: 5x11x4mm bearings are not included. 4 bearings are required.
Features:
Fits the 2WD Slash, Nitro Slash, Bandit, Electric Rustler and Electric Stampede
Replaces stock Traxxas #3736
5x11x4mm size bearings not included
Available in Black and Blue
This product was added to our catalog on October 13, 2021
RPM80375, Front Bearing Carrier, Blue: TRA 2WD
Product Details
Key Features
Fits the 2WD Slash, Nitro Slash, Electric Rustler and Electric Stampede
Replaces stock Traxxas #3736
5x11x4mm size bearings not included
Available in Black and Blue
Overview
Traxxas Bandit
Traxxas Nitro Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
RPM oversized bearing carriers are the perfect solution for worn bushings and weak 5 x 8mm. bearings! Give your electric the same performance the nitro trucks come stock with. 5 x 11mm. bearings have higher load ratings than a 5 x 8mm. bearing and will significantly increase the time between maintenance periods. In addition, our bearing carriers are so strong; we guarantee that they won't ever break! Molded in black. When used in conjunction with our #80382 Rear Bearing Carriers, you'll never have to worry about worn-out bushings or blown wheel bearings again!
Tech Notes: 5x11x4mm. bearings are not included with these kits (4 bearings are needed for each kit).
Product Specifications
Material
Plastic
Refinement Color
Blue
This product was added to our catalog on December 16, 2021
RPM80382, Rear Bearing Carriers, Black: RU, ST, BA, SLH
Product Details
Key Features
Strong and durable
Overview
Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM’s front and rear bearing carriers allow e-Rustler, e-Stampede, Slash & Bandit owners to install massive 5mm x 11mm bearings (not included) that will not only improve performance, but will increase the time interval between maintenance periods. In addition, our front and rear bearing carriers are molded in black from RPM’s killer blend of bulletproof nylons and are guaranteed not to break!
Product Specifications
Refinement Color
Black
Material
Plastic
RPM80832, R Shock Tower,Black: RU, ST, BA, SLH
Product Details
Overview
RPM rear shock towers for the electric versions of the Stampede, Rustler & Bandit as well as the Slash were designed with one thing in mind – rugged durability. Once again, we’ve exceeded our own expectations with this shock tower. While we’ve maintained all stock geometry on these shock towers, we’ve beefed them up in all the right places to eliminate annoying rear shock tower breakage. Our version of this shock tower uses an I-Beam construction that improves durability and rigidity as well. At the base of the shock tower, we’ve improved the screws’ head clearance of the bulkhead mounting screws to eliminate the bind normally associated with the stock rear shock tower. All these design elements combine to create the ultimate lightweight, bulletproof rear shock tower for the electric versions of the Rustler & Stampede.
RPM rear shock towers for the Traxxas Slash, Electric Stampede, Electric Rustler & Bandit are molded in black and are backed by our famous breakage warranty. These towers are direct replacement parts for ease of installation.
Product Specifications
Part Type
Shocks & Shock Parts
Refinement Color
Black
Material
Plastic
Traxxas Compatible Maxx WideMaxx (89086-4) Sealed Bearing Kit
(2) 5x8x2.5
(3) 6x13x5
(4) 6x16x5
(2) 8x12x3.5
(1) 8x16x5
(4) 10x15x4
(7) 12x18x4
(2) 12x21x5
(1) 15x24x5
Model 89086-4
You are purchasing the bearings listed above.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK your R/C before ordering to make sure you get all the proper bearings. We try to keep the kits updated as best as we can. If you find a variation or mistake in our kits, please contact us so we can look into it.NOTE: PHOTOS ARE FOR IDENTIFICATION ONLYPhotos are for Seal / Shield / Bearing Style identification only and ARE NOT a photo of the exact bearing being ordered. Please reference the size.
TRA1651, Traxxas Driveshaft Set
This is a replacement Traxxas Drive Shaft Set, and is intended for use with the Traxxas Bandit.
Includes:
(2) inside shafts
(2) outside shafts
(4) universal joints (metal balls with 4 pins sticking out in a cross pattern)
This product was added to our catalog on September 7, 2021
TRA2417, Traxxas Bandit Pre-Cut Body Set (Clear)
The Traxxas Bandit Body Set comes pre-cut and is the best way for you to give a custom look to your Bandit. Package includes one decal sheet, wing and body set with overspray film.
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Needed to Complete:
Paint for body
Misc. Tools for Assembly
This product was added to our catalog on April 7, 2021
TRA2432, Traxxas 30° Caster Block Set
This is a replacement Traxxas 30° Caster Block Set, and is intended for use with the Traxxas Bandit.
This product was added to our catalog on September 7, 2021
TRA2436L, Traxxas Body Bandit VXL Prographix Graphics
Body, Bandit® VXL, ProGraphix®/ wing (graphics are printed, requires paint & final color application)/ decal sheet
The Bandit® VXL ProGraphix® body includes front and rear canopy with wing and decal sheet. From mild to wild, choose your own colors to personalize your body. The detailed graphics are fully painted, but the rest of the body is clear, so you can choose your own main body color. Simply grab a can of Traxxas ProGraphix® paint and spray the final color. It's easy for anyone to get instant, professional results. Traxxas ProGraphix bodies come completely trimmed with pre-drilled body post holes for easy installation. There's also a protective overspray film applied to the body.
This product was added to our catalog on November 17, 2022
TRA2443, Traxxas 36mm Camber Link Turnbuckle Set (2)
Replacement part for these models:
Bandit VXL
Drag Slash
Accessory part for these models:
Bandit
This product was added to our catalog on September 7, 2021
TRA2444, Traxxas 47mm Front Camber Link Turnbuckle Set (2)
Replacement part for these models:
Bandit® VXL
Drag Slash
Accessory part for these models:
Bandit®
This product was added to our catalog on September 7, 2021
TRA2445, Traxxas 55mm Toe Link Turnbuckle Set (2)
Replacement part for these models:
Bandit VXL
Drag Slash
Accessory part for these models:
Bandit
This product was added to our catalog on September 7, 2021
2470A - Tires & wheels, assembled (Tracer 2.2' black chrome wheels, Alias 2.2' tires) (2) (Bandit rear, medium compound with foam inserts) (TSM rated)
TRA2470A, T&W BLK CHRM 2.2/ALIAS FR TIRE
Alias® 2.2" medium compound tires come assembled with foam inserts on Tracer 2.2" wheels. Available in mirror chrome and black chrome finish.
Replacement part for these models:
Bandit® VXL
This product was added to our catalog on September 7, 2021
TRA2478, Traxxas Anaconda 2.2" Rear Tires (2) (Bandit) (Standard)
This is a set of two Traxxas Anaconda 2.2 Rear Tires. Anaconda performance street tires will turn heads with their tough look and blazing performance. The specially formulated tire compound provides exceptional wear and sticky traction for high-speed street action. Molded-foam inserts coupled with the directional tread design provide a balanced feel for the ultimate high-speed on-road experience.
This product was added to our catalog on May 7, 2021
TRA3636T, Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4)
This product was added to our catalog on September 7, 2021
TRA3678, Traxxas Wheelie Bar Assembly (Black)
This is a replacement wheelie bar assembly from Traxxas. This wheelie bar mounts to the rear of the car to prevent if from flipping over backwards during hard acceleration.
The patented Traxxas adjustable wheelie bar features four-position adjustment to control the height of your wheelies. Durable composite nylon construction offers an extra level of protection for the motor and transmission case. Installation is quick and easy while optional aluminum wheels with rubber tires (5186 and 5186A) provide extra style and increased performance (sold separately).
Replacement part for these models:
Stampede® VXL
Accessory part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Ford® F-150 Raptor
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Stampede®
This product was added to our catalog on September 7, 2021
TRA3695, Traxxas Slash Pro-Built Complete Transmission (fits 1/10-scale 2WD Rustler, Bandit, Stampede, Slash)
This product was added to our catalog on May 7, 2021
TRA3725X, Traxxas Battery Expansion Kit (Rustler/Bandit/Stampede)
The battery expansion kit from Traxxas allows the installation of larger format battery packs into the Velineon® powered Rustler VXL, Bandit VXL, and Stampede VXL. The package includes hardware to raise the electronic speed control mount and battery posts allowing clearance for taller battery packs.
This product was added to our catalog on May 7, 2021
TRA3736, Traxxas Steering Blocks (2) (VXL)
This is a set of two replacement steering blocks from Traxxas. These steering blocks mount the the front uprights, and support the front axles.
This product was added to our catalog on May 29, 2021
TRA3739, Traxxas Screw Pin Set
This is a replacement suspension screw pin set from Traxxas. These suspension screw pins are used where the suspension arms pivot.
Fits:
Traxxas Bandit
Traxxas Hoss
Traxxas Nitro Slash
Traxxas Rally
Traxxas Rustler 2wd
Traxxas Rustler 4x4
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 2wd
This product was added to our catalog on April 12, 2021
TRA3740, Traxxas Suspension King Pins w/ E-Clips (2)
This is a set of two replacement suspension king pins with e-clips from Traxxas.
This product was added to our catalog on April 29, 2021
TRA3787, Traxxas 2WD Hardware Kit
Give your Traxxas model a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware. Individual compartments keep everything organized with a handy label to measure and identify the parts.
This product was added to our catalog on October 4, 2023
TRA3794, Traxxas, LED LIGHT SET 2WD RUST/BNDT
LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits 2WD Rustler® or Bandit®)
Product Information:
TRA3794, Traxxas, LED LIGHT SET 2WD RUST/BNDT
Traxxas Vehicles, Parts & Accessories
Traxxas
UPC: 020334379405
This product was added to our catalog or updated on April 4, 2022
TRA9450, Traxxas Drag Slash/Bandit Driveshaft Assembly
Traxxas Drag Slash Driveshaft Assembly. This replacement driveshaft is intended for the Traxxas Drag Slash, however, it will fit the Traxxas Bandit.
Package includes one driveshaft and one screw pin.
This product was added to our catalog on September 7, 2021
TRA9450R, Traxxas Drag Slash Rear Heavy Duty Steel CV Driveshaft (2)
Traxxas Bandit
Traxxas Drag Slash
This is an optional Traxxas Rear Steel Constant-Velocity Driveshaft Set, and is intended for use with the Traxxas Bandit, Bandit VXL and Drag Slash. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for superior protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Package includes two pre-assembled driveshafts and two driveshaft pins.
This product was added to our catalog on April 12, 2021
TRA9495, Traxxas Magnum 272R Assembled Transmission
The Traxxas Magnum 272R Assembled Transmission has been developed specifically for hard hitting drag applications. This replacement transmission is intended for the Traxxas Drag Slash, however, it will work with the 2WD Bandit, Rustler, Stampede or Slash. Package includes one preassembled transmission.
Traxxas Bandit
Traxxas Drag Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
The transmission comes preassembled with all metal gears, bevel gear differential and easily removeable differential. To hold these components together, Traxxas has made an extremely rigid case that incorporates the suspension arm mounts and mount positions for the optional wheelie bar. Full metal gears are used allowing optimal power transfer. Sealed bevel gear differentials are easily tunable to help you get maximum traction on any surface. A removable cover on the bottom of the transmission case allows for ease of access to the differential making maintenance a breeze. All of these features and functions allow greater consistency and all around performance.
Features:
Extremely rigid case
Includes 3.2mm aluminum motor plate
Full metal gears
Tunable sealed differential
This product was added to our catalog on October 19, 2021
Traxxas Aluminum Steering Bellcrank Set w/Bearings
The Traxxas Aluminum Steering Bellcrank Set with Bearings is a machined aluminum upgrade for the Rustler, Bandit, Nitro Slash, and Slash models. This bellcrank set will enhance steering precision, strength, and looks. These ball bearing equipped bellcranks offer silky smooth operation for reduced friction and long life.
Fits:
Traxxas Bandit
Traxxas Drag Slash
Traxxas Nitro Slash
Traxxas Rustler 2wd
Traxxas Slash 2wd
The pre-assembled units are easy to install, include detailed installation instructions, and are available in a variety of anodized colors with laser-etched Traxxas logo.
This product was added to our catalog on April 12, 2021
Traxxas Battery Hold Down Plate
This is a replacement battery hold down plate with posts, and clips from Traxxas.
Traxxas Bandit
Traxxas Rustler 2wd
Traxxas Slash 2wd
This product was added to our catalog on September 7, 2021
YEA-TRSL-016BU, Yeah Racing 90mm Aluminum TR-XB Big Bore Shocks (Blue) (2)
Yeah Racing 90mm Aluminum TR-XB Big Bore Shocks. These optional shocks feature threaded bodies and are intended for the Traxxas Stampede, Slash or Bandit. Package includes two assembled shocks.
NOTE: These shocks do not come pre-oiled and will require you to fill with your shock fluid.
Features:
Perfect fit for the Traxxas Slash, Stampede or Bandit
Aluminum, threaded, shock bodies
This product was added to our catalog on December 30, 2021
YEA-TRSL-017RD, Yeah Racing Traxxas Slash/Stampede/Bandit Aluminum Big Bore Shocks (Red) (2)
Yeah Racing Traxxas Slash/Stampede/Bandit Aluminum Big Bore Shocks. These optional shocks are a great way to increase the handling performance of your Traxxas Slash, Stampede or Bandit.
These shocks come assembled and only require you to fill with the shock fluid of your choice (sold separately). Package includes two assembled shocks.
This product was added to our catalog on March 4, 2021
