HRADRL30VM01, Vertical Shock Mounts with Standoff: Losi Drag Car
The Hot Racing Losi 22S Drag Vertical Shock Mounts are a tuning option that alters the shock geometry, placing the shocks in a more vertical position to improve rear weight transfer at launch. Package includes one vertical shock mount, two standoffs and hardware.
Features:
CNC machined aluminum Vertical Shock Mounts anodized black
Three shock mounting locations expands suspension tuning options
Stronger and more rigid than stock shock mount
Stainless Shock stand offs
This product was added to our catalog on September 27, 2021
HRAMTT5601, Hot Racing Losi Mini-T 2.0 Aluminum Rear Arm Set (Black) (2)
Hot Racing Losi Mini-T 2.0 Aluminum Rear Arm Set. This is an optional accessory intended to fit the rear of the Losi Mini-T 2.0. These arms are constructed with CNC machined aluminum and offer increased strength and rigidity over the stock suspension arms. Package includes one left aluminum rear arm, one right aluminum rear arm and mounting hardware.
This product was added to our catalog on November 8, 2022
HRASLS90T1111, Hot Racing 90mm Suspension Travel Limit Straps (2) (Gunmetal)
This item works with: Axial AX-10 Deadbolt, AX-10 Ridgecrest Crawler, EXO 4WD Terra Buggy Kit, SCX-10 Scale Truck, Wraith 4WD Rock Racer RTR, XR10 Crawler, Yeti; ECX 1:18 Temper Rock Crawler; Vaterra Ascender 1:10 Chevrolet K5 Blazer.
Limit straps are used to take stress off shocks and to control suspension extension. For example, when crawling up or descending steep grades, straps tied to the center of an axle are useful to limit the suspension from unloading and the vehicle from rolling, all while keeping suspension articulation intact. From climbing, to droop control, to super scale looks, these limit straps will get you further and get you noticed!
Features:
Woven 2-ply Nylon fabric strap material
CNC machined aluminum clevis buckles, anodized gunmetal in color
Specifications:
Length eye-to-eye: 90mm (3.54 inch)
Total length end-to-end: 97mm (3.81 inch)
Nominal strap size: 8x2.3mm (0.31x0.09 inch)
Eyelet hole size: 3.3mm (0.13 inch) - for a 3mm screw
Includes:
(2) 90mm (nominal length) limit straps
NOTE: These straps are made from 200 lb. test nylon and offers minimal stretch to provide a consistent strap length and to protect against overextending shocks- Tested on extreme off-road terrain- Strap lengths are measured from the center of the mounting holes and are accurate to +/- 3mm.
This product was added to our catalog on February 22, 2022
HRATE48G01, Aluminum/Carbon Fiber Steering Bellcranks & Draglink, for Traxxas Bandit & 2wd Slash
The Hot Racing Traxxas Slash Aluminum Steering Bellcranks & Draglink Set is an aluminum steering rack upgrade for the Traxxas Bandit, Rustler, 2WD Slash, and similar vehicles
Features:CNC machined 6061 aluminum bellcranks, anodized black with chamfered edges2.5mm carbon fiber draglink with brass bushingsBall bearings for smooth and consistent bellcrank performanceReplaces Traxxas plastic 3743 steering bellcranks and draglinkIncludes:(1) right aluminum bellcrank(1) left aluminum bellcrank(1) carbon fiber draglink(4) 5x8x2.5mm ball bearings(2) brass bushings(2) M3x8mm button head cap screws
This item was added to our catalog March 3, 2022
LOS234011, Losi Rock Rey Front Suspension Arm Set
Losi Rock Rey Front Suspension Arm Set. Package includes right and left side suspension arms, and right/left side arm stiffener plates.
This product was added to our catalog on March 22, 2021
LOS242037, Losi LMT Front/Rear Differential Rebuild Kit
Losi LMT Front/Rear Differential Rebuild Kit. This replacement rebuild kit is intended for the front or rear of the Losi LMT. Package includes one differential rebuild kit.
This product was added to our catalog on March 22, 2021
TRA7729, Traxxas X-Maxx Upper Suspension Arm (2)
This is a pack of two replacement Traxxas X-Maxx Upper Suspension Arms. These arms can be used on the front or rear of the vehicle, as well as the right or left side.
This product was added to our catalog on September 7, 2021
TRA8995G, Traxxas Maxx WideMaxx Suspension Kit (Green)
The Traxxas WideMaxx Suspension Kit is a suspension upgrade that adds 40mm to the track width (20mm per side), and includes extreme-duty cold-weather suspension arms, offering increased performance and durability. Updated springs are included to use in the rear of the truck, while the original rear springs get moved up to the front for optimized balance. Additionally, a set of wider toe links for the front and extended outer half shafts are included for all four wheels to finish off the widened stance. Plus, the kit is available in multiple colors allowing you to add a custom look to your Traxxas Maxx.
Installation is simple, thanks to the Maxx’s thoughtful engineering throughout which makes removal and replacement of the included components quick and easy. The option to utilize existing components including the stock axles saves time and gets you driving even faster.
Features:
Widens the Maxx by 1.57” (40 mm) for increased cornering stability
Extended arms constructed from extreme-duty cold weather compound
Increases cornering stability
Includes 1.725 Rate rear springs
Includes:
(4) Upper suspension arms
(4) Lower suspension arms
(4) Extended outer half shafts
(2) WideMaxx toe links
(2) Rear springs (1.725 rate)
This product was added to our catalog on May 27, 2021
TRA9080, Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty Suspension Upgrade Kit (Black)
Traxxas Hoss
Traxxas Rustler 4x4
Traxxas Slash 4x4
The Traxxas Hoss/Rustler/Slash 4x4 Extreme Heavy Duty Suspension Upgrade Kit has been designed to turn your ride into the ultimate bashing machine. This optional suspension upgrade kit is intended for the Traxxas Hoss 4x4, Rustler 4x4 and Slash 4x4. The kit uses fully updated suspension components, as well as Maxx Duty driveshafts with 6mm stub axles and steel wheel hexes.
NOTE: May not work with sway bars or other accessories.
Features:
Designed for the Traxxas Hoss 4x4, Rustler 4x4 and Slash 4x4 models
Adds extreme durability to your ride
Fully updated suspension components, drivelines and hexes
Available in multiple color options to best match your build
This item was added to our catalog February 21, 2024
TRA9633, Traxxas Sledge Front Left/Right Suspension Arm Covers (Black)
Add a high-tech look to your Sledge® front suspension arms and keep them clean of debris with these colorful front left and right suspension arm covers. Includes 2.5x8 mm mounting screws (12).
This product was added to our catalog on April 4, 2022
YEA-TATT-040RD, Yeah Racing Tamiya TT-01/TT-01E Aluminum Rear Hubs (Red) (2)
Yeah Racing Tamiya TT-01/TT-01E Aluminum Rear Hubs. These optional rear hubs are designed to reduce slop found in the rear of the Tamiya TT-01 or TT-01E chassis. Package includes two rear hubs.
Features:
Perfect fit for the Tamiya TT-01 or TT-01E
Reduces slop found in the rear suspension
Made from machined aluminum and anodized deep red
This product was added to our catalog on December 16, 2021
