ARA310945, Arrma 4S BLX 0.8Mod HD Steel Spur Gear (57T)
This is a Arrma 0.8Mod HD 57 tooth Steel Spur Gear for use with the Arrma Kraton and Outcast 4S BLX 4x4 kits. This optional heavy duty steel spur gear is CNC machined from super-tough steel for extreme durability.
Features:
Super-strong steel for long-lasting durability in extreme RC conditions
Precision manufactured 0.8 module tooth configuration for consistent Pinion Gear mesh and operation
57 tooth configuration
Includes:
(1) 57T HD Steel Spur Gear
This product was added to our catalog on May 1, 2021
ARA310947, Arrma 3S BLX HD 0.8MOD Spur Gear (57T)
This is a replacement Arrma 57 Tooth HD 0.8MOD Spur Gear for use with the Arrma 3S BLX Big Rock, Granite, Senton and Typhon.
This product was added to our catalog on May 22, 2021
ARA310978, Spur Gear 50T Plate Diff for 29mm Diff Case
This is a replacement Arrma 50T Spur Gear, a strong and durable replacement for your Kraton, Mojave, Notorious, Outcast and Talion 6S kits.
Features:
Strong steel for long-lasting durability in extreme RC conditions
Precision manufactured tooth profile for consistent mesh with pinion gear and smooth operation
50T, 1 module gear tooth configuration
For use with 29mm diff case differential
Includes:
(1) 50T Steel Spur Gear
This product was added to our catalog on March 2, 2022
ARA311112, Arrma Infraction MEGA 0.8MOD Spur Gear (55T)
Arrma Infraction MEGA 0.8MOD Spur Gear. This replacement spur gear is made from high quality composite for long lasting durability. Package includes one spur gear intended for the Arrma Infraction MEGA.NOTE: Requires Arrma Infraction MEGA Slipper Pads (ARA310994 - Not Included).Features:
Precision manufactured gear teeth for smooth, consistent performance
Tough molded composite material for long-lasting durability
Designed for use with a single castellated slipper pad
Fits:
Arrma Infraction MEGA
This product was added to our catalog on April 2, 2021
HRAERVT50M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (50T)
Traxxas E-Revo VXL 2.0
Traxxas Maxx
Traxxas X-Maxx
Traxxas XRT
Traxxas XO-1
This product was added to our catalog on December 16, 2021
HRASJT253, Hot Racing Traxxas 32P Steel Spur Gear (Grey) (53T)
This is the Hot Racing Steel 32 Pitch, 53 Tooth Spur Gear with grey hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4.
Features:
CNC machined and lightened hardened steel construction
Black oxide coating for durability and corrosion resistance
Grey-colored countersunk washers
Specifications:
Number of Teeth: 53
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: 6mm (0.24 inch)
Internal diameter: ~11mm (~0.43 inch)
Includes:
54 tooth 32 pitch spur gear
(3) mounting screws
(3) grey-colored countersunk washers
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
Requires:
Hardened clutch bell or pinon gear
Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
This product was added to our catalog on December 16, 2021
HRASSLF254D, Hot Racing Steel Center Diff Spur Gear 32P 54T 0.8m
This is the Hot Racing 54 Tooth Center Diff Spur Gear for the 1/10 scale Traxxas Slash 4x4, or Stampede with Center Diff.
Traxxas Slash 4x4
Traxxas TRX-4
This product was added to our catalog on December 16, 2021
HRASTE250, Hot Racing Traxxas 32P Steel Spur Gear (Orange) (50T)
This is an optional Hot Racing Traxxas 32P 50T Steel Spur Gear with Orange hardware for the 1/10 Traxxas Bandit, Rustler, 2WD Slash, 2WD Stampede, and Telluride vehicles.
Features:
CNC machined and lightened hardened steel construction
Replaces stock nylon spur gear
Rugged 0.8 Module/32pitch teeth for total reliability on brushless power
Black oxide coated gear for durability and corrosion resistance
Orange anodized countersunk aluminum washers
High strength hardware
Specifications:
Number of Teeth: 50
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: ~5mm
Includes:
(1) 50 tooth 32 pitch (0.8 Mod) spur gear
(3) mounting screws
(3) orange anodized countersunk washers
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate)
This product was added to our catalog on December 16, 2021
HRASTE252, Hot Racing Traxxas 32P Steel Spur Gear (Red) (52T)
This is an optional Hot Racing Traxxas 32P 52T Steel Spur Gear with Red hardware for the 1/10 Traxxas Bandit, Rustler, 2WD Slash, 2WD Stampede, and Telluride vehicles.
Features:
CNC machined and lightened hardened steel construction
Replaces stock nylon spur gear
Rugged 0.8 Module/32pitch teeth for total reliability on brushless power
Black oxide coated gear for durability and corrosion resistance
Red anodized countersunk aluminum washers
High strength hardware
Specifications:
Number of Teeth: 52
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: ~5mm
Includes:
(1) 52 tooth 32 pitch (0.8 Mod) spur gear
(3) mounting screws
(3) red anodized countersunk washers
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate)
This product was added to our catalog on May 4, 2021
HRASTE256, Hot Racing Traxxas 32P Steel Pinion & Spur Gear Set (Purple) (18T/56T)
Hot Racing Traxxas 32P Steel Pinion & Spur Gear Set (Purple) (18T/56T) (Slash, Rustler, Stampede, Bandit)
This is an optional Hot Racing 32 Pitch Steel Pinion and Spur Gear Set for use with the following Traxxas 2WD models: Bandit, Rustler, Slash and Stampede.
Features:
CNC machined and lightened hardened steel construction
Replaces stock nylon spur gear
Rugged 0.8 Module/32pitch teeth for total reliability on brushless power
Aluminum pinion sleeve to allow for either 1/8 inch or 5mm motor shafts
Black oxide coated gear for durability and corrosion resistance
Purple anodized countersunk aluminum washers
High strength hardware
Specifications:
Number of Teeth: 18T/56T
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: ~5mm
Includes:
(1) 18 tooth 32 pitch (0.8 Mod) pinion gear
(1) 56 tooth 32 pitch (0.8 Mod) spur gear
(3) mounting screws
(3) purple anodized countersunk washers
(1) pinion adapter sleeve
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate)
This product was added to our catalog on March 16, 2021
HRASTE876, Hot Racing Traxxas 48P Hardened Steel Spur Gear (76T)
Compatibility
Traxxas Bandit
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
Traxxas Telluride 4x4
The Hot Racing Traxxas 48P Hardened Steel Spur Gear is an optional spur gear intended for the Traxxas Bandit, 2WD Slash, Rustler, 2WD Stampede, and Telluride models. The spur gear is available in a variety of tooth count options, please select the specific gear you want from the list above. Package includes one spur gear and mounting hardware.NOTE: Motor temperature should never exceed 180F (under 160 recommended). ESC temperatures should never exceed 160F. Excessive temperatures will shorten the life of the electronics.
Features:
CNC machined and lightened hardened steel construction
Replaces stock nylon spur gear
Black oxide coated gear for durability and corrosion resistance
Red anodized countersunk aluminum washers
High strength hardware
Specifications:
Gear Pitch: 48 pitch
Mounting Holes: 3
Tooth Face width: ~5mm
This product was added to our catalog on February 21, 2022
KIM228, Kimbrough 64P Precision Spur Gear (90T)
Kimbrough Products 64 Pitch precision spur gears have been used to set all of the unlimited speed records for R/C 1/10 scale electric cars in the U.S., and are used by a majority of the top professional R/C car racers around the world. The best drivers in the world trust Kimbrough gears, so you know you can too!
Kimbrough spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers.Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count options to allow you to fine tune the torque and top speed of your model.NOTE: The use of full width pinion gears is highly recommended.
This product was added to our catalog on December 22, 2023
KIM381, Kimbrough 48P Traxxas Spur Gear (81T)
Kimbrough Products 48 Pitch Traxxas spur gears were developed for Traxxas 1/10 Electric vehicles. Kimbrough Racing Products Plastic Gears have been used to set all of the unlimited speed records for R/C 1/10 scale electric cars in the U.S., and are used by a majority of the top professional R/C car racers around the world. The best drivers in the world trust Kimbrough gears, so you know you can too!
Kimbrough spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers.
Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model.
NOTE: The use of full width pinion gears is highly recommended.
This product was added to our catalog on May 19, 2021
KIM387, Kimbrough 48P Traxxas Spur Gear (87T)
Kimbrough Products 48 Pitch Traxxas spur gears were developed for Traxxas 1/10 Electric vehicles. Kimbrough Racing Products Plastic Gears have been used to set all of the unlimited speed records for R/C 1/10 scale electric cars in the U.S., and are used by a majority of the top professional R/C car racers around the world. The best drivers in the world trust Kimbrough gears, so you know you can too!Kimbrough spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers.
Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model.
NOTE: The use of full width pinion gears is highly recommended.
This product was added to our catalog on November 18, 2021
KYOFA556-68, Kyosho Fazer FZ02 TC Spur Gear (68T)
Kyosho Fazer FZ02 TC Spur Gear. Package includes one replacement 68T TC Spur Gear, compatible with the FZ02 and FZ02L series chassis.
This product was added to our catalog on June 18, 2021
KYOFAW213, Kyosho FZ02L HD Spur Gear (75T)
This is a replacement Kyosho 75T FZ02L HD Spur Gear, intended for use with the Fazer Mk2 Rage 2.0 1/10 4WD Readyset Truck.
This product was added to our catalog on April 3, 2023.
The LokSound 5 micro DCC Direct has been specially developed for installation in Spur N vehicles of the Atlas and Intermountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can also be used for similar models from other manufacturers at your own discretion.
The LokSound 5 micro DCC Direct with its dimensions of 66.0mm x 8.2mm is a pure DCC decoder and comes without a loudspeaker.
Modes
The LokSound 5 micro DCC Direct is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center.
It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.
The LokSound 5 micro DCC Direct Decoder detects the Märklin® brake distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An AUTOMATIC ABC commuter train allows automatic commuting between two stations.The LokSound 5 micro DCC Direct can be used on analog DC webs.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.
Sound
The LokSound 5 micro DCC Direct Decoder can play up to 12 channels simultaneously. Each channel can be resolved with up to 16 bits / 31250 kHz and offers hi-fi quality on your system. There is virtually no difference to the original audible anymore. A Class-D audio output stage with up to 3W output power controls the speakers, which have between 4 ohms and 32 ohms impedance. A 128 Mbit sound memory provides enough capacity.All individual noises can be adjusted individually in the volume. The super-flexible sound engine without a rigid schedule allows the exemplary simulation of all conceivable rail tracks.
Functions
The LokSound 5 micro DCC Direct has 10 directly soldered LEDs. Two of them are intended for front and rear head lighting, two more are connected to the aux3 and AUX4 outputs to switch e.g. number boards. A further 6 LEDs on the bottom are intended for ditch lights, but can also be used for other lighting purposes on request. All important lighting functions are available. The brightness of each output can be set separately.
Motor
The motor control of the LokSound 5 micro DCC Direct has a variable PWM clock frequency from 10kHz to 50kHz, which ensures super-quiet operation, especially for bell anchor motors – the hitherto typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the decoder to be automatically measured against the motor. The LokSound 5 micro DCC Direct Decoder delivers up to 0.9A motor power.
Protection
Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible
TRA6438, Spur gear, 44-tooth (machined, hardened steel) (wide face) (1.0 metric pitch)
44-tooth spur gear (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.
This item was added to our catalog March 13, 2024
TRA6842, Traxxas .8 Mod Spur Gear (50T) (Slash 4x4)
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.
Accessory part for these models:
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 Platinum
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
Stampede® 4X4
This product was added to our catalog on September 7, 2021
TRA9651, Traxxas Sledge Steel Spur Gear (Mod 1.0) (46T)
Traxxas Steel Mod 1 Spur Gear. This spur gear is intended for the Traxxas Sledge and offers the ability to change gear ratios as per the users preference. Package includes one Mod 1 steel spur gear.
This product was added to our catalog on July 20, 2022
Traxxas Steel Wide-Face Mod 1.0 Spur Gear
This is an optional Traxxas Steel Wide-Face 1.0 Metric Spur Gear, intended for use with the Maxx 1/10 Brushless Monster Truck and the X-Maxx 8S 4WD Brushless Monster Truck.
This spur is available in multiple tooth count options.
Fits:
Traxxas Maxx
Traxxas X-Maxx
Traxxas XRT
This product was added to our catalog on May 7, 2021
