Products
JConcepts JCO3180-101021, JConcepts Pin Swag 2.2" Pre-Mounted Rear Buggy Carpet Tires (White) (2) (Pink) w/12mm Hex
JCO3180-101021, JConcepts Pin Swag 2.2" Pre-Mounted Rear Buggy Carpet Tires (White) (2) (Pink) w/12mm Hex OVERVIEWThe JConcepts Pin Swag 2.2" Mounted Rear Buggy Carpet Tires combine the outer lugs of a JConcepts front tire with the dense arrangement of Pin Down type pins. The pins themselves are round and crisp to the top where they peak out to a point. Near the sidewall, the Swag enters with a smooth transition and drops off to a ledge. The pre-mounted tire option is a welcomed addition to the line-up providing racers a professionally mounted item utilizing top quality inserts on performance-based wheels. The pre-mounted JConcepts tires include open cell, medium inserts for plush control mounted on JCO3348 Mono wheels available in bright white and fluorescent yellow.The Swag is split down the center to give a little individual control to contort to surfaces. In between, a stagger section with angular front is placed just behind a vertical rib to complete the design. The tight spacing of the Pin and Swag bite together and minimize wear across the carcass. An already low-profile carcass rolls through the turns and transitions well at high and low speeds.A unique feature on the Pin Swag is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on the wheel which lead a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue process and the geometry gives many edges and ledges to adhere to.Features:Pre-mountedJConcepts original design, details, and materialsLow profile carcass layoutPin and Swag combo pin / lug arrangementHefty base pin with crisp endsDense layout to help minimize wearUltra-light weight scalloped tire beadsPlush open cell inserts includedMounted on authentic JCO3348 wheels This product was added to our catalog on April 12, 2024
$29.00
JConcepts JCO4059-02, 1/24 Fling Kings 1.0" Crawler Tires and Inserts, Green Compound (2)
JCO4059-02, 1/24 Fling Kings 1.0" Crawler Tires and Inserts, Green Compound (2) OverviewOne of the aliases of the mud tires, “Rice and Cane,” refers to the purpose or landscape they were originally designed for within the farming and agriculture industry. The Fling Kings by JConcepts are the first RC Mega 1.0” crawler tire, specifically designed to throw mud, dirt, gravel, and grass just like the real thing.The large sized tires at 63mm outside diameter, are tall enough to dance through the deepest RC loam, however, it’s the tall lugs that separate them from the rest. The 1:1 tire were hand-cut to produce the most wicked looking tires on the block. The JConcepts tires are uniquely built to replicate a hand-cut set, however, deep tread remains to do the “mega” land damage the drivers and enthusiasts crave.One of the most impressive details about the Fling Kings is that they are designed for the very popular and industry standard 1.0” 1/24th scale wheels, making them even more appealing. No details were spared on these mud runners, the V-type tread is replicated to a T and the top of the tread carries a slight recess adding a little touch of depth to the appearance. Off to the side, the tire lettering hits hard with retro style JConcepts lettering, Fling King logo and crown with #4059 part number for easy identification.The super soft "green" compound which is recommended for dirt, grass, and asphalt feels noticeably sticky and at low speed, does plenty of deep digging. The JConcepts tires include soft, open cell inserts made for carcass flexibility. Look for genuine JConcepts logos, lettering, packaging, and rubber compounding before any purchase. Look for reputable dealers and distributors and demand authentic products. The package is complete and backed with JConcepts customer support and racing heritage.FeaturesIndustry standard 1.0” bead mounting diameter and design inspirationTire measures – 20mm wide x 63mm O.D.V-style tread with replicated “hand-cutting”Single contour carcass with traditional mounting beadImpactful tire lettering with retro JConcepts logoAvailable in "super soft" green compoundIncludes soft, open cell insertsMega style and performance This product was added to our catalog on March 29, 2024
$25.00
JConcepts JCO8147, JConcepts AE B6.4/B6.4D "No Apologies" Precut Chassis Protective Sheet (2) (RM2)
JCO8147, JConcepts AE B6.4/B6.4D "No Apologies" Precut Chassis Protective Sheet (2) (RM2) The JConcepts AE B6.4/B6.4D "No Apologies" Precut Chassis Protective Sheet is designed after the style of World Champion Ryan Mayfield. Leaving it all on the track, speaking your mind and standing your ground is a mindset, and a belief that what’s best, comes from within. This No Apologies chassis protector brings that mindset to life and keeps you focused at the track while still looking good!Features: Stealth black, heavy gray undertones High impact print of RM2 in blazing red No apologies tag line in centered location Direct fit for B6.4 | B6.4D Includes: (2) AE B6.4/B6.4D "No Apologies" Precut Chassis Protective Sheets This product was added to our catalog on November 21, 2023
$16.99
Traxxas TRA3631X, Traxxas HD Cold Weather Front Suspension Arm Set (Black)
TRA3631X, Traxxas HD Cold Weather Front Suspension Arm Set (Black) This is an optional Traxxas HD Cold Weather Front Suspension Arm Set, a heavy duty set of front suspension arms for for 2WD Slash, Stampede, and Rustler feature an updated design which incorporates the latest proprietary composite material, available in multiple colors. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it off a curb, or preparing for the next speed run, these arms were built for extreme wear. This product was added to our catalog on September 7, 2021
$10.00
XRAY XRA320301, XRAY SCX'23 1/10 Electric 2WD Competition Short Course Truck Kit
XRA320301, XRAY SCX'23 1/10 Electric 2WD Competition Short Course Truck Kit Xray SCX'23 1/10 Electric 2WD Competition Short Course Truck This is the Xray SCX'23 1/10 Electric 2WD Competition Short Course Truck Kit. This SCX'23 is yet another great presentation of XRAY’s dedication to paying attention to the finest details to offer racers quality top level products. This 2023 version of the Xray SCX offers a variety of updated components and features to improve overall performance and racing experience such as the extra narrow and super low center of gravity (LCG) gearbox to reduce weight and move all parts closer to the chassis centerline with easy to access differential that requires removing nothing but six screws to get full access. In addition, differential height can be adjusted with six positions to choose from depending on the track conditions. Get your SCX'23 and experience the high quality and top level performance! NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: CNC machined from high quality 2.5mm Swiss 7075 T6 aluminum lightweight chassis Graphite side guard braces with multiple mounting positions to make the front of the car more stable and predictable Extra narrow and super low Center of Gravity (LCG) gear box Adjustable differential height with six positions to choose from depending on the track conditions Gear differential with 35% larger internal oil volume to increase consistency of the differential action Lightweight motor mount machined from Swiss 7075 T6 aluminum and is designed to fit the (LCG) gearbox and spur gear protector 3 Pad slipper clutch to ensure the super smooth clutch operation and efficient consistent braking Heavy duty drive shafts manufactured from world-renowned HUDY Spring Steel Aluminum big bore threaded shocks Shock springs specifically designed for the heavier and wider truck to achieve improved suspension performance in all track conditions 2-hole pistons (1.6mm and 1.7mm holes) are now included Heavy duty HUDY spring steel constant velocity drives (CVD) drive shafts Roll center holder features multiple positions for fine tuning Rear uprights feature aluminum roll center mounts with adjustable roll center positions Aluminum suspension holders feature integrated suspension settings (ISS) to allow quick and easy suspension geometry setup heavy duty adjustable turnbuckles Shock towers are constructed from strong composite materials with multiple upper shock positions Ultra lightweight CNC-machined 12mm wheel hex hubs Two slots steering block extensions better suited for higher traction conditions Beefy 6mm thick body posts to provide maximum strength and extra support to body The front lower chassis brace is part of the multi flex system that influences flex and handling Adjustable battery tray Adjustable wheelbase Includes: (1) Xray SCX'23 1/10 Electric 2WD Competition Short Course Truck Kit Needed to Complete: (1) 2 to 3 channel radio/transmitter (1) 1/10 Electronic speed controller (1) 1/10 540 size motor (1) 2S Shorty LiPo pack (1) Compatible charger (1) Steering servo Paint for body Tires, inserts, wheels & CA glue Tools for assembly This product was added to our catalog on October 18, 2023
$424.99