This is a replacement set of two CEN F450 SD Sway Bar Main Shafts, intended for use with the CEN Ford F450 SD scale truck.
COMPATIBILITY
CEN Ford B50
CEN Ford F450
This is an optional CEN F450 SD Tension Bar Set, intended for use with the CEN Ford F450 SD scale truck. This pack includes 1.3mm, 1.4mm, and 1.5mm, two each.
This product was added to our catalog on February 16, 2021
This is a replacement set of two CEN F450 SD Differential Cases, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 16, 2021
This is a replacement CEN F450 SD Outdrive Cup, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 15, 202
This is a replacement set of two CEN F450 SD Wheel Axles, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck.
This product was added to our catalog on March 15, 2021
This is a replacement CEN F450 SD Main Gear Shaft, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on March 4, 2021
This is a replacement CEN F450 SD 2nd Gear Shaft, intended for use with the CEN Ford F450 SD scale truck.
COMPATIBILITY
CEN Fiat Abarth
CEN Ford B50
CEN Ford F450
CEN Suzuki Jimn
This is a replacement CEN F450 SD Front Axle Shaft, intended for use with the CEN Ford F450 SD scale truck. Package includes one front axle shaft.
This product was added to our catalog on February 16, 2021
This is a replacement CEN F450 SD Wheel Hex set, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on March 4, 2021
CEGCQ0219, CEN F450 Center Transmission Gear Box
This is a replacement CEN F450 SD Center Transmission Gear Box, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on March 4, 2022
This is a replacement set of two CEN F450 SD Slipper Pads, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 16, 2021
This is a replacement CEN F450 SD Straight Axle Adapter, intended for use with the CEN Ford F450 SD scale truck. Package includes two rear axle lockout straight axle adapters.
This product was added to our catalog on February 16, 2021
This is a replacement CEN F450 SD 4-Link Bracket, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck.
This product was added to our catalog on March 15, 2021
This is a replacement pack of ten CEN F450 SD M2x8mm Flat Head Screws, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck.
This product was added to our catalog on March 15, 2021
This is a replacement pack of ten CEN 3x16mm Set Screws, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck.
This product was added to our catalog on February 15, 2021
This is a replacement pack of six CEN F450 SD King Pins, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on March 4, 2021
This is a replacement set of two CEN F450 SD Servo Saver Springs, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck.
This product was added to our catalog on February 15, 2021
This is a replacement set of ten CEN 3x10mm Button Head Screws, intended for use with the CEN Ford F450 SD scale truck.
COMPATIBILITY
CEN Ford B50
CEN Ford F450
CEN Reepe
CEGG36401, CEN Ford F450 SD M3 Nylon Locknuts (10)
This is a pack of ten CEN M3 Nylon Locknuts, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on March 4, 2022
This is a replacement pack of six CEN F450 2x8mm Pins, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck.
COMPATIBILITY
CEN Fiat Abarth
CEN Ford B50
CEN Ford F450
CEN Suzuki Jimny
CEGG73301, CEN F450 32P Spur Gear (56T)
This is a replacement CEN F450 32 Pitch 56 Tooth Spur Gear, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 7, 2024
This is a replacement CEN F450 5.8mm Extended Pivot Ball, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 16, 2021
This is a set of two CEN 5x8x2.5mm Ball Bearings, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on March 4, 2021
This is a replacement set of two CEN F450 5x10x4mm Ball Bearings, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 16, 2021
CEGG73907, CEN 10x15x4mm Ball Bearing (2)
This is a replacement set of two CEN 10x15x4mm Ball Bearings, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 16, 2021
This is a replacement CEN Racing Aluminum Differential Case Set, and is intended for use with the CEN Racing GST 7.7 and GST-E monster trucks. Package includes two differential cases and hardware.
This product was added to our catalog on September 23, 2020
CEN Lower Suspension Arm. Package includes replacement suspension arm for the CEN Reeper and Colossus XT monster trucks. This suspension arm can be used in the front or rear position, on both the left and right side of the chassis.
COMPATIBILITY
CEN Reeper
CEN Ford F450 SD KG1 Edition 1/10 RTR Custom Dually Truck w/2.4GHz Radio
The CEN Officially Licensed Ford F450 SD KG1 Edition 1/10 RTR Custom Truck is an exciting, unique True Scale contender to the scale truck scene. This dually truck was developed to create the look of a custom lifted truck, with the features needed to keep you rollin' for the long haul. The KG1 Edition includes officially licensed KG1 Trident D wheels, and is available in either a silver mercury with black wheels, or candy apple red with gold wheels to create the ultimate cruiser.
This truck was made dust and water proof to protect the components on any track or trail. Over heat protection and throttle signal loss prevention give you the feedback needed to not over-do a good time or lose control of your truck. A Pistol-Grip AMP 30 3 Channel Transmitter is included in this Ready to Run, featuring digital trim and a built in fail-safe to help you stay in control. CEN paid attention to the details with the components as well, with hardened steel components, super scale features and a full selection of option parts designed to allow easy customization.
Features:
SC-40A WP-1040-Brushed (Powered by HobbyWing):
Water-proof and dust-proof for all weather
Built-In Capacitor Module
Automatic throttle range calibration
Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
Over-Heat protection and throttle signal loss protection
Easily programmed with jumpers
Motor-RS-550 high Torque Motor (Power By Mabuchi Motor)
Servo -12Kg Servo O.E.M. by Savox:
4.8V 0.26 sec/60deg 10.0 kg-cm
6.0V 0.23 sec/60deg 12.0 kg-cm
25T Horn Gear Spline
Radio System:
Pistol-Grip AMP 30 3 Channel Transmitter
Digital Trimming
Steering Dual-Rate (ST D/R) Adjustment
End Point Adjustment (EPA)
Built in Fail-safe
Chassis:
Steel Frame Rails
CMS (Chassis Mounted Servo) Chassis Design
Stamped Steel Shock Hoops
Steel Skid Plate
Full Precision Ball Bearing Support
Adjustable Turnbuckles
High Torque Servo Horn Safer
Suspension:
3 Links Suspension with Panhard Bar Design
Big Bore Oil Filled Adjustable Coil Over Shocks
Harden Steel Steering Drag Link
Sway bar included
6mm Aluminum Linkage
Drivetrain:
4 Wheel Drive
Center Shaft Drive Train for more power transferred to the wheels
Highly Efficient Transmission System
Wide Range Easy Changeable Gear Box Design
Sealed transmission eliminates dirt and dust
Sealed Axle housing
5mm Hardened Steel Axle shaft
Differential Center Locker Front/Rear Planetary Gear Type
Metal Transmission Gears
Planetary Gear type Differential
Specifications:
Length: 26.70inch (678.18mm)
Width: 11.41inch (290mm)
Wheelbase: 17.60inch (447mm)
Ground Clearance: 2.52inch (64mm)
Weight: 5.51 lb. (2.5kg)
Battery: 2s Lipo recommended
Includes:
(1) Ford F450 SD KG1 Edition True 1/10 Scale RTR Custom Truck
Needed to complete:
2S Lipo w/T-Style Connector
Battery Charger
(4) "AA" Batteries for Transmitter
This product was added to our catalog on December 29, 2021
CIS15891, Aluminum Steering Link: SCA-1E Series
The steering linkage to remove flex associated with the RTR's plastic linkage.
This product was added to our catalog on February 10, 2024
SCA-1E 1/10 Scale Prairie Wolf RTR
The call of the wild, the need to explore and to discover new locations, to respect and being at one with nature, leads more and more people to go 'Off Grid' to escape the urban 9-5 lifestyle. For those people, Carisma Scale Adventure offers the opportunity to do so in 1/10th scale.Carisma's 'Prairie Wolf' LWB Adventure Van exudes 'Off Road Adventure'. With scale details like a LED-Ready Grille, robust wing mirrors, and a rear panel roof access ladder, the body looks the part straight from the box, but still has enough scope for additional detailing. Add a roof rack, luggage, spare wheels & tires, or any other scale accessories you'd like. The possibilities are truly limitless.Vacuum formed in a thicker than standard polycarbonate for additional rigidity, the body comes pre-painted and adorned with a retro Off Road inspired livery. The 324mm wheelbase rig meets 2.1 Spec and including the CMS Mount, offering a forward weight bias, which when combined with the ATT Transmission and 95mm AT-SS soft compound tires improves rock crawling ability. Carisma also addressed the issue of torque twist with their ATT (Anti Torque Twist Transmission), neutralizing twist and keeping the wheels firmly planted (and generating grip).The trusty Carisma CTX-8000 2.4GHz radio system is supplied with the RTR rig. Featuring Steering Rate adjustment, Steering and Throttle Trims, Channel Reversing, End Point Adjustment and F.H.S.S (Frequency Hopping Spread Spectrum) Technology for glitch free use. Carisma also includes a 1400mah NiMH battery and 5V USB Charger to get you started on your adventure. The ARC-1 ESC is LiPO friendly, offering owners a clear future upgrade path. Carisma has also lowered the gear ratio in the transmission to 5.92:1, giving a smoother low RPM range and greater finesse and control. To compliment this they have introduced a new Sealed Can 17T 5 Pole Motor, with greater magnetic force over a 3-pole motor, thus offering a balance between RPM and torque. Being a sealed can, the motor will be more weather resistant and require minimal maintenance between runs.
CIS83168SCA-1E 1/10 Scale '76 Ford F-150 4WD Scale Crawler, RTR (313mm Wheelbase) Black
This original American classic, has now evolved into a shorter 313mm, 2.1 Spec rig, while keeping the original scale details, along with the classic Ford F-150 pickup look. The shorter wheelbase adds to the rig's abilities when crawling and makes this American workhorse even more desirable.
With the SCA-1E Gen 2 layout as standard, the Ford F-150 with the CMS Mount offers a forward weight bias, whicht combined with the shorter wheelbase, aids in crawling performance. This places the battery pack and steering servo right up front and over the front axle. The issue of torque twist (something inherent in all shaft driven rigs) has been addressed with Carisma's ATT (Anti Torque Twist Transmission), which counteracts and reduces the effects of torque twist. This is done by ensuring the front and rear center driveline spin in opposite directions and flipping the rear diff. This creates a counter rotational force in the central driveline that significantly reduces torque twist and enhances the available traction where you need it most...at the wheels. The rig runs flatter even at full throttle, and the geometry is more stable and predictable when rock crawling.
Along with the LiPo friendly ARC-1 Electronic Speed Controller, it features a lowered gear ratio in the transmission (5.92:1), giving a smoother low RPM range and greater control. To compliment this it has a sealed can 17T 5 pole motor, with greater magnetic force over a 3-pole motor, thus offering enhanced torque and throttle finesse. But it's not all about crawling, the 17T motor has the ability to still produce wheel speed when required, for trail running. Being a sealed can, the motor will be more weather resistant and require minimal maintenance between runs, a must for all Scale Adventurists.
Giving the fully Licensed Ford F-150 body a black finish makes the chrome of the grille, wipers, mirrors, and wheels stand out even more. This complete contrast really suits the rig, and further enhances its original 1970's look. As with the previous release, the body is also LED Ready and accepts our own or third part LED Kits (sold separately). The chrome, 1.9" true beadlock wheels allow you to add weight to each rim if you want to fine-tune the weight bias, and to complete the wheel and tire package, are the soft compound ATAT (All Terrain Adventure Tires) which offer great all round performance. The trusty Carisma CTX-8000 2.4GHz radio system is supplied with the RTR rig.
Featuring Steering Rate adjustment, Steering and Throttle Trims, Channel Reversing, End Point Adjustment and F.H.S.S (Frequency Hopping Spread Spectrum) Technology for glitch free use, eliminating cross channel interference and offering precise and responsive control at all times. It also includes a 1400mah NiMH battery and 5V USB charger to get you started on your adventure. In addition the ARC-1 ESC is also LiPO friendly, offering owners a clear future upgrade path.
Features:
CMS Mount For Improved Weight Bias
ATT (Anti Torque Twist) Transmission
Lower 14/83 (5.92:1) Gear Ratio
5 Pole 17T Brushed Crawler Motor
LiPo Safe ARC-1 ESC with Crawler Mode
Front CVD's & Robust Steel Driveline
Specifications:
Wheelbase: 313mm
Length: 480mm
Width: 230mm
Clearance: 75mm
CIS85968, MSA-1MT 2.0 Spec Coyote 4WD 1/24 RTR with Battery & Charger
The 2.0 Spec vehicles have been equipped with a new, faster MT Spec Carisma Motor, offering double the power of their existing power plant in both wheel speed and torque. They've also redesigned the ESC software to offer a more traditional, bashing orientated; Forward, Reverse and Brake profile. But that's not all, they've also changed the gearing to work in harmony with the MT Spec's electronics to create what they feel is the ultimate 1/24th Micro Monster Truck.
This product was added to our catalog on February 10, 2024
CIS86368, Carisma SCA-1E 1/10 Scale 70s Ford F-150 2.1 Spec 4WD RTR Scale Truck (Black)
Now with 2.1 Spec as standard. New Retro Livery, and a one piece 313mm wheelbase body. This will be the last of this model as a RTR, and is sure to become a very sought after rig. Grab a piece of American Automotive History today and hit the Trails and Rocks with one of our most capable rigs.This LWB, 2.1 Spec Rig offers CMS (Chassis Mounted Servo), 1.9 true Beadlock 1.9 wheels and soft compound AT-AT tyres. The fully Licensed 70's Ford F-150 body includes chromed injection moulded details and LED ready light buckets. With 2.4GHz FHSS 2-Channel Radio Gear, a 9kg Metal Geared Steering Servo, NiMH Battery and safe USB Charger included it's a complete 'Ready To Run' rig, in every sense of the word!
Features:
New retro livery
Pre-built and fully painted
One piece 313mm WB body
Chassis mounted servo
1.9" true beadlock wheels
Soft compound AT-AT tires
Fully licensed 70's Ford F-150 body
Chromed injection molded details
LED ready light buckets
2.4GHz FHSS 2-channel radio
9kg metal geared steering servo
This product was added to our catalog on February 10, 2023
CIS86568, Carisma SCA-1E 2.1 Spec Toyota Tacoma TRD Pro 1/10th RTR
Carisma's most successful rig ever has evolved, and they've kept the affordable price point, making it one of the best value rigs on the market.
Officially Licensed TOYOTA TACOMA TRD Pro Body
With Hard Body realism, and the weight advantage of polycarbonate, this is no ordinary shell! It's a multi-part body with added injection molded scale detail.
LED lights are pre-fitted at the factory, and will allow users to illuminate their way on rocks or trails (or even urban environments).The rig also comes with unique TRD Pro, True Beadlock Wheels, ensuring that the 95mm Ultra Realistic ATSS tires stay firmly on the rims.
Upgrades & Enhancements
The Gen 2 layout, with CMS Mount and forward mounted battery, offers a forward weight bias to aid crawling, making it ready for action! The issue of torque twist, something inherent in all shaft driven rigs, has been addressed with the ATT (Anti Torque Twist Transmission) which counteracts and reduces the effects of torque twist by rotating the front and rear center drivelines in opposite directions. This creates a counter rotational force in the central driveline that significantly reduces twist and enhances traction when you need it most. The rig runs flatter even at full throttle, and the geometry is more stable and predictable when rock crawling
Increased Control & Torque
This rig comes with the fully programmable ARC-2 Electronic Speed Controller as standard. Fine-tune any one of 21 Programmable Performance Parameters (including PWM Frequency) with the included, (and easy to use) MPG-1 programmer. Truly class leading electronics at an affordable price.
Alongside the LiPo friendly ARC-2 Electronic Speed Controller, the gear ratio has been lowered to 5.92:1, giving a smoother low RPM range and greater control. The CSA 5-Pole Motor generates immense torque and low RPM throttle finesse, which is essential for exploration, trail running and rock crawling. When matched with the ARC-2 ESC, this offers a formidable combination of control and power.
Tried & Trusted Electronics
Carisma's CTX-2000 2.4GHz radio system is supplied with the RTR rig. Featuring Steering Rate adjustment, Steering and Throttle Trims, Channel Reversing, End Point Adjustment and F.H.S.S (Frequency Hopping Spread Spectrum) Technology for glitch free use, eliminating cross channel interference and offering precise and responsive control at all times. With a unique 1-2-3 Throttle Profile Switch, it allows users of all abilities to have complete control of the rig. From seasoned OG RC enthusiasts, to complete RC newbie, Carisma has you covered. Also included is a 1400mah NiMH battery and safe 5V USB Charger to get you started on your adventure, although the ARC-2 ESC is also LiPO friendly, offering you a clear future upgrade path.
Dimensions:
Wheelbase: 313mm
Length: 510mm
Width: 210mm
Clearance: 75mm
Features:
Officially Licensed TOYOTA TACOMA TRD Pro Body
LED Lights are pre-fitted at the factory
5-Pole Motor generates immense Torque and low RPM Throttle Finesse
9kg High Torque Metal Geared Servo
ATT (Anti Torque Twist) Transmission
Low 14,83 (5.92:1) Gear Ratio
This product was added to our catalog on September 10, 2022
Ford F450 American Force Wheel and Fury Tire 1/10 4WD RTR Custom Truck DL- Series
The CEN Ford F450 SD V2 1/10 RTR Custom Dually Truck features custom updates to this already unique scale truck. When first released the CEN Ford F450 quickly became a cult classic, sparking scale inspired builds and custom options. The V2 takes the same features that created this icon and adds a custom touch. The most noticeable are the updated body colors; Blue Galaxy(CEG8984) and Grey Titanium(CEG8985). Adding to this look are the chrome wheels and links offered with the Blue Galaxy model and the Gold wheels and links offered on the Grey Titanium model. This creates a custom look further setting the CEN Ford F450 apart from the competition. With a stout and durable drivetrain the CEN F450 offers the same proven performance you would expect from a heavy duty truck. Using scale steel frame rails as a base for the 3 link suspension this truck features 4wd drivetrain offering an abundance of traction with the rear axle having four tires digging for grip. Powering this drivetrain is a large 550 size brushed motor and Hobbywing 40A WP-1040 ESC. Steering is handled by a high torque Savox servo and an AMP 30 3-Channel transmitter providing precise steering and throttle control. Packed full of features out of the box and topped off with custom looks that no other truck offers it is easy to see why the CEN Ford F450 is so popular!
Features:
SC-40A WP-1040-Brushed (Powered by HobbyWing):
Water-proof and dust-proof for all weather
Built-In Capacitor Module
Automatic throttle range calibration
Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
Over-Heat protection and throttle signal loss protection
Easily programmed with jumpers
Motor-RS-550 high Torque Motor (Power By Mabuchi Motor)
Servo -12Kg Servo O.E.M. by Savox:
4.8V 0.26 sec/60deg 10.0 kg-cm
6.0V 0.23 sec/60deg 12.0 kg-cm
25T Horn Gear Spline
Radio System:
Pistol-Grip AMP 30 3 Channel Transmitter
Digital Trimming
Steering Dual-Rate (ST D/R) Adjustment
End Point Adjustment (EPA)
Built in Fail-safe
Chassis:
Steel Frame Rails
CMS (Chassis Mounted Servo) Chassis Design
Stamped Steel Shock Hoops
Steel Skid Plate
Full Precision Ball Bearing Support
Adjustable Turnbuckles
High Torque Servo Horn Safer
Suspension:
3 Links Suspension with Panhard Bar Design
Big Bore Oil Filled Adjustable Coil Over Shocks
Harden Steel Steering Drag Link
Sway bar included
6mm Aluminum Linkage
Drivetrain:
4 Wheel Drive
Center Shaft Drive Train for more power transferred to the wheels
Highly Efficient Transmission System
Wide Range Easy Changeable Gear Box Design
Sealed transmission eliminates dirt and dust
Sealed Axle housing
5mm Hardened Steel Axle shaft
Differential Center Locker Front/Rear Planetary Gear Type
Metal Transmission Gears
Planetary Gear type Differential
Specifications:
Length: 26.70inch (678.18mm)
Width: 11.41inch (290mm)
Wheelbase: 17.60inch (447mm)
Ground Clearance: 2.52inch (64mm)
Weight: 5.51 lb. (2.5kg)
Battery: 2s Lipo recommended
Includes:
(1) Ford F450 SD V2 1/10 RTR Custom Dually Truck
Needed to complete:
2S Lipo w/T-Style Connector
Battery Charger
(4) "AA" Batteries for Transmitter
This product was added to our catalog on August 1, 2022
