180090S, RER10352, Redcat Everest Gen7 Aluminum High Steering Knuckles w/Link
Redcat Everest Gen7 Aluminum High Steering Knuckles. These aluminum knuckles will help to increase front end durability and steering precision, while the high steer design helps to increase clearance at the front steering link. Package includes two knuckles, one steering link and one servo link.
This product was added to our catalog on April 16, 2021
50038, Redcat Racing 50038 Front/Rear Lower Inner Suspension Arm Hinge Pin 6x94mm 4pcs
Front/Rear Lower Inner Suspension Arm Hinge Pin (4pcs)(6x94mm)
Used with all: Rampage MT, Rampage TT, and Rampage Rally models
This product was added to our catalog on May 1, 2021
BS204-010, RER08190, 1/10th Drift Wheel and Tire (Black Chrome) (1pr)
Quantity Included - 2
Hex Size - 12mm
Pre Glued - Yes
Rim Color - Black
Overall Width - 25mm
Overall Diameter - 61mm
Offset - 15mm
This product was added to our catalog on December 16, 2021
BS205-011, RER04389, Road Wheels, Chrome
Quantity Included - 2
Hex Size - 12mm
Pre Glued - Yes
Rim Color - Chrome
Overall Width - 26mm
Overall Diameter - 64mm
Offset - 15mm
This product was added to our catalog on December 16, 2021
Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EzRun MAX10 SCT is able to deliver unmatched power and performance for even the most hardcore applications. With incredible acceleration capabilities and a rock-solid, stable output, the MAX10 SCT can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways, and powering through the bumpiest terrian. The MAX10 SCT features an electronic switch with a lifespan of over 50000 on/off cycles,
housed in a completely waterproof, dust-prood and shock-resistant design.
Features:
Cont./Peak Current: 120A/760A
Input: 2-4S LiPo/6-12 Cells NiMH
BEC Output - Switch Mode: 6V/7.4V,3A
Size: 49.0x39.5x34.7mm
Weight: 105g
KV Rating: 2S LiPo: up to 6000KV, 3S LiPo: up to 4000KV, 4S LiPo: up to 3000KV (36XX Series of Motors)
Ezrun Max8 G2 ESC with XT90 Plug
Efficient cooling systemThe frameless fan design is a patented technology.The rapid transmission of internal heat to theintegrated housing radiator are made up of highairflow from the side of the fan and a copper thermalconduction sink on the internal power plate. Theseare built into high-reliability thermal systems toensure that it is always in good thermal condition.1/8thBrushless System Turbo TechnologyThe current brushless system is best paired with the EzRun 4278/4268SD G2 to achieve the maximum performance.The turbo parameter is adjustable from up to 32 degrees and the speed is significantly increased by up to 25%.Capacitor Thermal ProtectionCapacitor thermal protection implemented by the ESC willirreversible damage to the ESC due to overload.Super Internal BECThe built-in switch mode BEC with a maximum output of 15Aand voltage adjustable from 6V to 8.4V (step:0.1V) allowsthe use of various standard servos, high voltage servos.Built-in Big CapacitorThe ESC has three built-in 680uF capacitors, which increasesthe performance by 74% (870uF) compared to the MAX8 ESC.The ultra-large capacitors built onto the ESC also ensuresusers do not need to install external capacitors on their vehicles.Real-time data & data logging function,easy to get the power running status.After connecting the OTA module box, turn on real-time data recordingfunction to access the operating status.
New sensored cable interfaceThe Max8 G2 ESC is equipped with a new type of sensored cable interface.It is high recommended to use the motors from Hobbywing as the waterproof protection level is at the highest level (IP67).
Features:
The ESC uses a special process, coupled with an innovative waterproof design, to increase waterproofing and dust-proofing performance in different climates. It is easy to deal with the harsh conditions containing sediment, ice, and snow, water accumulation.
Built-in ultra-powerful switch mode BEC with a continuous current of 6A, an instant 15A, and support for 6V/7.4V/8.4V switching, supporting a wide range of powerful and high-voltage servos.
Equipped with the most advanced and safe electronic switches. The traditional mechanical switch protects and prevent dust, humid and other harsh environments, contact rust, and violent impact (such as flying slope landing) caused by the automatic closure of mechanical switches and other issues.
Support the 32 degree turbo timing setting. When used with the matching motor (such as EZRUN 4278SD), the maximum rpm can be increased by about 25%, easily win your rival. Multiple protection functions: battery low voltage protection, ESC and motor overheat protection, signal loss protection, current protection.
Support LED program card, LCD G2 program box, OTA programmer (Note: optional) to set the parameters of the ESC.
Scale Vehicles 1/8th
Cont./Peak 160A / 1050A
Sensored and sensorless brushless motor
Waterproof
RER10644, Hexfly C6D Mini LiPo/NIMH Charger
Hexfly HX-c6d mini AC Balance Charger. This is a rapid charger/discharger with a built in balancer, microprocessor and advanced operating software.
Operating Voltage Range: AC100.0-240.0 Volt
Circuit Power: Max .60W for charging, Max .10W for discharging
Charge Current Range: 0.1~6.0A
Discharge Current Range: 0.1~2.0A
Current Drain for balancing Li-Po: 300mAh/cell
NiCd/NiMh battery cell count: 6-8S
Lithium Battery cell count: 2-4S
Pb battery voltage: 6V(3P)-12V(6P)
Weight: 302g
Dimensions: 115x112x55mm
This product was added to our catalog on January 2, 2022
Lightning STK 1/10 Scale Electric
PRODUCT FEATURES
If you're into Stock Car racing, you'll love the Redcat Racing Lightning STK! Designed to look and handle like a full sized Stock Car, the Lightning STK is a blast to drive. Get some of your friends together and create a Stock Car race series of your own.
Become your own crew chief with the Lightning STK's fully tunable independent suspension, tunable oil filled shocks, multiple shock positions, adjustable camber, adjustable toe angle, adjustable chassis clearance, adjustable body height, and tunable gear differentials. Add a rear wing and scale on road racing tires to all that tunability, and you've got a highly capable race car that can help prepare you for track tuning full sized race cars.
Adjust suspension preload on the aluminum capped oil filled shocks, using the included preload collars, or completely change spring tension and stiffness by installing after market springs. Varying weight aftermarket shock oils can also be used for a large array of shock dampening options. The Lightning STK also has a large selection of performance parts available, including those machined from high quality aluminum.
Ready to run, the Lightning STK includes a 19T RC550 brushed electric motor, 40a waterproof ESC, precision steering servo, 2.4GHz radio system, 7.2v 2000mAh NiMH rechargeable battery, and a NiMH battery charger.
The forward and reverse electronic speed controller allows the Lightning STK to back out of pile ups in turn four, while the 2.4GHz precision radio system allows you to weave in and out of lap traffic with complete control.
Get your Lightning STK today and take home the checkered flag!
1/10 scale on road race car, Shaft driven 4 wheel drive, Independent suspension, Lightweight plastic chassis w/ aluminum top plate, Oil filled shocks, Front and rear gear differentials, Ball bearings throughout.
Tunable suspension, Adjustable ride height, Adjustable toe angle, Adjustable camber angle, Tunable shocks, Selectable shock positions, Tunable gear differentials.
Detailed Stock Car body, Molded plastic rear wing, Realistic tires w/ high speed dish wheels
19T RC550 brushed electric motor, 40a Waterproof ESC, Precision steering servo, 2.4GHz radio system.
PRODUCT FEATURES
Plastic Front Steering Knuckles L/R (1pr)Plastic Front Steering Knuckles L/R (1pr)
Includes 1 Left and 1 Right
(Uses 08024 and 01083 screws to mount to 02015)
PRODUCT FEATURES
Aluminum Steering Knuckles L/R (Blue) (1pr)
Aluminum replacements for 02014 Plastic Steering Knuckles
Includes 02096 3x10mm Machine Thread Screws and 98064 3x12mm Machine Thread Screws. Suggested to apply some blue thread lock to screws before installing.
PRODUCT FEATURES
540 Brushless Sensorless Motor (3300kv)
Input Voltage: 6-8v Max
Constant Current: 58A Max
Constant Watts: 420W
No Load Current: 5A
Dimensions (Diameter x Length): 36mm x 50mm
Connector: 4mm male bullet
PRODUCT FEATURES
2720kv 540 brushless motor
Input Voltage: 7-12v Max
Dimensions (Diameter*Length): 36mm*50mm
Shaft size: 3.2mm
Connector: 4mm male bullet
RED04003, Center Drive Shaft (Purple) (1pc)
Aluminum Drive Shaft primarily used in Volcano and Tornado EPX/EPX PRO as well as Dukono.
Specifications:
171.5mm End to End
166.5mm Pin to Pin
PRODUCT FEATURES
4x36mm Steel Turnbuckles W/ Aluminum Rod Ends (Blue) (2pcs)
Replacement for 08042 on Volcano EPX/EPX Pro series as well as steering links on Volcano S30
02097 3x14mm Screws needed when installing as steering links to connect to 02025E/02025 and 02075
PRODUCT FEATURES
90mm Front/Rear Dog Bones (2pcs)
Primarily used in Volcano EPX/EPX Pro series from differential to the wheels.
Specifications:
90mm End to End
84mm Pin to Pin
PRODUCT FEATURES
Front/Rear Aluminum Shocks (Blue) (2pcs)
Included shocks for Volcano EPX Pro/Volcano S30 as well as direct fit and upgrade for Volcano EPX models.
Specs:
Oil Filled (suggest 35-40wt oil for replacement)
Length: 105mm (End to End)
Spring Diameter: 13.5mm (Inner)
Shaft Size: 3mm
