Easy Move Fiberglass 90mm x 450mm battery tray by MBP. The Easy Move tray allows for both the easy install / removal of lipo packs without the stress of having to use Velcro directly stuck on your packs. The downfall of using velcro directly on lipo packs is that the removal of the packs pulls & stresses the aluminum tabs connectors inside of the packs. This system removes that stress by allowing the battery to be strapped directly to the tray with Velcro straps and when you need to remove the battery simply unscrew one thumb screw and remove the pack with absolutely no stress to the pack. See the video on the bottom of this page.Another great feature is this system allows for the quick forward and backward adjustments for fine tune the balance of your boat.Specs:90mm (3.54") x 450mm (17.71") Weight: approx 481 gramsIncludes:(1) trayRequires: Velcro straps and installation into hull
Carbon, Water cooled heavy duty motor mount for 36mm motors.Fits 36mm diameter motors that are 60mm or longer in length.Both water-cooled and adjustable. The rear motor clamp helps carry the weight of the heavier/longer 36mm motors. Angle is adjustable to allow straight alignment with propeller cable.The anodized aluminum mounting plate with extended Carbon Fiber mounting stands to distribute the weight of the motor over a larger area for added strength. The mounting plates have holes drilled in the bottom to allow the epoxy to flow into them to make a superior bond to the hull. This mount can fit a flat mounting area like a rigger or hydro, or a deep vee.
Applications:Fits most 36mm motors that are 60mm or longer.For example Feigao, Nemesis, Hacker 540XL motors. Tp36xx, Leopard 3660, 3674Will fit up to a 50mm long water jacket.Measures:Total width of 58mm including the mounting stands.Metal center mounts measure 54mm wide.Requires you to provide motor mounting screws.Comes with mount only. Motor and water jacket only in pictures for display purposes.
PHBPH9022, QS8-S Male / Female Plug / Connector Set (QS8.0mm-S)
This system guarantees constant charging of the capacitors on ESC and allows the battery to be connected without sparks on your ESC when you first plug in.
The design also provides no chance of incorrect polarity connection. Once soldered up, there are plastic guards that clip on each connector giving you a neatly wired plug and helps prevent short circuits.
These QS8-S heavy duty gold plated connectors with built-in antispark resistors are great for high power electric models equipped with TMM 40063-3 X2-SERIES or TMM 25063-3 X2-SERIES
Continuous Current: 110AMax Peak Current: 500AMAX Wire: 6AWGDiameter: 8.0mmGuaranteed Long Battery LifeMetal Material: Gold Plated BrassPlastic Material: Nylon with fiber
The RaCersEdge Relentless™, Custom 48" Offshore Mono Electric RC Speed/Racing Boat is propelled by brushless power that will have you flying across the water at adrenaline-pumping speeds of over 75+MPH! Performance is delivered by a brushless, water-cooled 730Kv motor, and harnessed by a 300A water-cooled electronic speed control.
This offshore Speed/Racing Boat features a durable uni-body fiberglass hull that arrives with bright, bold graphics that give the Relentless™ a fast, aggressive appearance. The durable propeller, aluminum rudder, and stainless running hardware provide a rugged, yet elegant look that completes the package, making the Relentless™ a great looking, high-performance boat that looks as fast on the included display stand as it does on the water.The RaCersEdge Relentless™ arrives 100% assembled out of the box.
Custom High-Performance Electric RC Boat
Waterproof Electronics
Product Specifications
Engine: Electric (Leopard 5692, 730Kv Brushless Motor)
Electronic Speed Control: (ZTW Seal Series ESC: 300A OPTO 6s-14s)
Hull: Offshore Mono - Part Number: 48OMhw
Length: 48"
What's in the Box?
RaCersEdge Relentless™, Custom 48" Electric RC Speed/Racing Boat
Needed To Complete:
Transmitter System: FUTABA 3PV - R304SB (#01004347-3) - Transmitter Systems, Surface Systems - Part Number: 01004347-3
Battery Options
Spektrum, SPMX56S100, 22.2V 5000mAh 6S 100C Smart G2 LiPo Battery: IC5
Spektrum, SPMX54S100H5, Spektrum G2, 5000mAh 4S 14.8V Smart G2 LiPo 100C; IC5
Spektrum, S2200 G2 AC 2x200W Smart Charger, SPMXC2010
Options:
SkyRC GNSS Performance Analyzer
Seal Series: Program Card for Seal ESCs
XBC100 SMART Battery Checker & Servo Driver
31" Hull, Electric Mono (White)
SPECIFICATIONS
Gel Coat Finish
Hand Laid Fiberglass
Includes Cowling
MEASUREMENTS
Length: 31 in
Width: 10 in
Weight: 2.8 lbs.
48" Hull, Catamaran (White)
SPECIFICATIONS
Hand Laid Fiberglass
Wood Stringers
Gel Coat Finish
Radio Box
Instruction Manual
MEASUREMENTS
Length: 48 in
Width: 15 in
Weight: 8 lbs.
48" Hull, Offshore Mono (White)
SPECIFICATIONS
Hand Laid Fiberglass
Wood Stringers
Gel Coat Finish
Radio Box
Instruction Manual
MEASUREMENTS
Length: 48 in
Width: 13.5 in
Weight: 7.5 lbs.
RCE6405, Racers Edge Metal Front CVD Shafts & Pins & M4 Lock Nut for Slyder
Metal Front CVD Shafts & Pins & M4 Lock Nut for Blackzon Slyder
This product was added to our catalog on October 28, 2021
RCETM4GP, Traxxas Male Connector to 4.0mm Gold Plated Banana Plug with 14AWG Silica Gel Charge Cable
Connectors: compatible with Traxxas Male and 4.0 Banana Male
Wire Length: 30cm/11.8inch
Wire: 14awg Heatproof Soft Silicone Cable
Directly connect to your batteries compatible with Traxxas connectors, and to your charger with 4mm banana plugs
