Fort Myers Florida Location Is Now Open!

10580 Colonial Boulevard, #112, Fort Myers, Florida 33913

Products

187 products

  • 103076-4, Spartan SR 6S (Self Righting) 36" Brushless Boat (Optional Trailer Available) 103076-4, Spartan SR 6S (Self Righting) 36" Brushless Boat (Optional Trailer Available)

    Traxxas 103076-4, Spartan SR 6S (Self Righting) 36" Brushless Boat (Optional Trailer Available)

    Out of stock

    103076-4, Spartan SR 6S (Self Righting) 36" Brushless Boat (Optional Trailer Available) 36″ Reinforced Deep-V Hull Made from lightweight vacuum-formed ABS Self-righting flood chamber Pre-applied graphics Quick-release electronics tray Rigid Injection-Molded Clipless Hatch Four quick-release hatch nuts with tool Foam seal keeps water out Includes optional tool-free wingnuts Up to 50 MPH with Dual 3s LiPo Batteries VXL-6s™ Marine Electronic Speed Control Water-cooled case Three drive profiles Sport Mode - forward / brake / reverse Race Mode - forward / brake Training Mode™ - 50% forward / brake / 50% reverse (patented) Built-in two-stage low-voltage detection for LiPo batteries NiMH battery packs: 14 cells (16.8 volts) LiPo battery packs: 4-6 cells (14.8 to 22.2 volts) Velineon 540XL Brushless Motor Ultra high-temperature sintered Neodymium magnets Efficient, high-speed ball bearings 1800 kV 5 mm output shaft Water-cooled jacket Traxxas Stability Management (TSM) Improves straight line acceleration Never dulls throttle or slows the vehicle Adjusts from off to 100% assistance from the transmitter TQi 2.4 GHz Radio System 2-channel transmitter 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports Automatically stores and loads settings for up to 30 Traxxas Link enabled models Programmable multi-function knob Patented waterproof receiver box Extra-Long 218 mm Battery Tray Centralizes battery weight Allows fore and aft battery positioning Accommodates multiple battery configurations Secure hook and loop straps Driveline Heavy duty 4.7 mm diameter flex shaft Quick-release motor collet Blue-anodized aluminum drive strut Low-maintenance bushings High performance prop Steering Waterproof digital 2056 servo Blue-anodized aluminum rudder with water pickup Precision-Cut Stainless Steel Trim Tabs and Turn Fins Stainless Steel Hex Hardware Used Throughout This product was added to our catalog on March 14, 2024

    Out of stock

    $449.99

  • 2716-10-75(3), 3 Blade Cleaver Propeller Left – RC Boat Propeller | ABC Props

    ABC Props 2716-10-75(3), 3 Blade Cleaver Propeller Left – RC Boat Propeller | ABC Props

    Out of stock

    2716-10-75(3), 3 Blade Cleaver Propeller Left – RC Boat Propeller | ABC Props

    Out of stock

    $34.95

  • 2717-10-75(3) CLL, 3 Blade Cleaver Propeller Left – RC Boat Propeller | ABC Props

    ABC Props 2717-10-75(3) CLL, 3 Blade Cleaver Propeller Left – RC Boat Propeller | ABC Props

    Out of stock

    2717-10-75(3) CLL Diameter 69 mmPitch 1,7Rake 10°Drive Dog 1/4"left rotation / normal rotation

    Out of stock

    $34.95

  • 2718-10-75(3), 3 Blade Cleaver Propeller Right – RC Boat Propeller | ABC Props

    ABC Props 2718-10-75(3), 3 Blade Cleaver Propeller Right – RC Boat Propeller | ABC Props

    Out of stock

    2718-10-75(3), 3 Blade Cleaver Propeller Right – RC Boat Propeller | ABC Props

    Out of stock

    $34.95

  • 2817-19-38(2), 2 Blade Cleaver Propeller Left – RC Boat Propeller | ABC Props

    ABC Props 2817-19-38(2), 2 Blade Cleaver Propeller Left – RC Boat Propeller | ABC Props

    Out of stock

    2817-19-38(2), Blade Cleaver Propeller Left – RC Boat Propeller | ABC Props

    Out of stock

    $34.95

  • 2819-19-38(2), 2 Blade Left Cleaver Propeller – RC Boat Propeller | ABC Prop

    ABC Props 2819-19-38(2), 2 Blade Left Cleaver Propeller – RC Boat Propeller | ABC Prop

    Out of stock

    2819-19-38(2), Blade Left Cleaver Propeller – RC Boat Propeller | ABC Prop Diameter: 2.8″ (71.12 mm)Pitch: 5.32″ (135.128 mm)Pitch Ratio: 1.9Material: Beryllium CopperThis prop is for a 1/4″ (.250) shaft size- we offer a reducer to adapt to 3/16th (.1875″) shaft.

    Out of stock

    $34.95

  • 38104-1, Traxxas Blast 24" High Performance RTR Race Boat w/TQ 2.4GHz Radio, Battery & DC Charger 38104-1, Traxxas Blast 24" High Performance RTR Race Boat w/TQ 2.4GHz Radio, Battery & DC Charger

    Traxxas 38104-1, Traxxas Blast 24" High Performance RTR Race Boat w/TQ 2.4GHz Radio, Battery & DC Charger

    Out of stock

    38104-1, Traxxas Blast 24" High Performance RTR Race Boat w/TQ 2.4GHz Radio, Battery & DC Charger The Traxxas Blast 24" High Performance RTR Race Boat is a fast, reliable and easy to drive boat. With a waterproof servo and a watertight receiver box, this is a perfect boat for lakes and larger pools. Traxxas has provided a updated set of graphics and a powerful water cooled brushed motor to provide killer looks and performance.  A TQ 2-channel 2.4GHz radio system is used so that multiple boats can be used side by side with no interference. The TQ uses advanced programming that provides long range control with glitch free performance. Features: TQ™ 2.4GHz radio system 7.2V Power Cell™ NiMH battery 4-amp DC Peak Detecting Fast Charger Installed water cooling system Waterproof electronics Sealed receiver box Nautica™ waterproof electronic speed control High-torque waterproof servo Factory-applied decals Traxxas High-Current Connector Sleek styling Specifications: Hull Type: High performance modified "V" Dead Rise Angle: 20 degrees Hull Length: 23.75 inches (603 mm) Beam: 5.75 inches (146 mm) Weight: 28 ounces (.793 kg) Draft: 3.25 inches (83 mm) Speed Control Type: Nautica™ waterproof ESC Charger: 4-amp DC fast charger Battery: Traxxas 6-cell NiMH battery with iD Motor (electric): Water-cooled 540 Stinger (20-turn) Drive System: Direct drive Outdrive: Adjustable surface-piercing Radio System: Traxxas TQ 2.4GHz (3-channel) Skill Level: 1 Includes:  (1) Orange Blast 24" RTR Boat (1) Traxxas TQ 2.4GHz (3-channel) (1) 4-Amp DC Fast Charger (1) 7.2V NiMH battery with iD Connector Needed to Complete: (4) AA Batteries for Transmitter This product was added to our catalog on May 7, 2021

    Out of stock

    $149.99

  • 57046-4, Traxxas M41 Catamaran High Performance 6S Race Boat 57046-4, Traxxas M41 Catamaran High Performance 6S Race Boat

    Traxxas 57046-4, Traxxas M41 Catamaran High Performance 6S Race Boat

    Out of stock

    57046-4, Traxxas DCB M41 Widebody 40" Catamaran High Performance 6S Race Boat w/TQi 2.4Ghz Radio & TSM Traxxas DCB M41 Widebody 40" Catamaran - Extreme Power with the Style to Match! The Traxxas DCB M41 Widebody 40" Catamaran was built for extreme power and speed. With a powerful 6s motor this boat can reach speeds in excess of 50mph! Built with a Twin-hull catamaran design the DCB M41 can handle high speeds even in less than ideal conditions. Additionally this boat is equipped with Traxxas Stability Management (TSM) bringing another level to stability that other boats cannot match. With 6s power, off the charts stability and dependable Traxxas components leave your competition at the docks with the DCB M41 Widebody! Traxxas has faithfully captured the incredible looks and performance of the DCB M41 in a detailed scale replica that is versatile, fun, and fast. Designed by DCB (Dave’s Custom Boats) founder Dave Hemmingson, is one of the largest full size models offered in the DCB M-Series. The full size boat with its precision sculpted design and a pair of Mercury Racing 1350 engines speeds across the water at 175mph!  Features: 50+mph on 6S LiPo 40" DCB M41 Widebody catamaran replica Stable Twin-hull catamaran performs across waves and smooth water Water-cooled, waterproof VXL-6s Marine speed control Traxxas High-Current Connectors (patented) Velineon 540XL high-output brushless motor with high flow water-cooling jacket Quick-release Power Module integrates power system with waterproof electronics Adjustable battery trays with hook-and-loop straps Blue-anodized aluminum rudder support, rudder, and drive strut Stainless steel trim tabs, and hardware TQi 2.4GHz radio system and 5-channel receiver Access the Traxxas Link app with the Traxxas Link Wireless Module (#6511) (sold separately) Traxxas Stability Management® (TSM) makes it easy to go fast Waterproof high-torque steering servo Specifications: Hull Type: Vacu-formed ABS, catamaran, shoebox style Hull Length: 39.5" (1003mm) Overall Length: 40.6" (1030mm) Beam: 10.5" (267mm) Height: 5.95" (151mm) Deadrise & Transom: 14.5 degrees Weight: 86.7 ounces (2.46 kg) Speed Control Type: Traxxas Velineon VXL-6s, water-cooled Input Voltage: 2-6 LiPo cells (14.8-22.2 volts DC) BEC Voltage: 6.0 VDC BEC Current: 3A Thermal Protection: Thermal shutdown Low Voltage Detection: Yes (user enabled) Motor (electric): Traxxas Velineon 540XL Brushless, water-cooled Drive System: Direct drive, 0.15 inch flex cable Outdrive: Adjustable aluminum Prop: 2-blade composite, 42x59mm Transmitter: TQi 2.4GHz (2-channel) Receiver: 6533 2.4GHz Traxxas Stability Management 5-channel Servo: 2056 High-torque waterproof Skill Level: 2 Needed To Complete: (4) "AA" Batteries (for transmitter) (2) 2S or 3S LiPo Battery w/iD Connector (1) Compatible Battery Charger This product was added to our catalog on May 1, 2022

    Out of stock

    $449.99

  • Last stock! BEL-2041-W, White Scale Outboard with Evinrude W/ Motor BEL-2041-W, White Scale Outboard with Evinrude W/ Motor

    OSE BEL-2041-W, White Scale Outboard with Evinrude W/ Motor

    1 in stock

    BEL-2041-W, White Scale Outboard with Evinrude W/ Motor White Scale Outboard with Evinrude decals.Includes: 1500KV Motor Specs: 6.10 Ounces. Steel gears Prop Shaft: 1/8" (3.17mm) prop shaft Requires: (1) Prop for 1/8" shaft, this unit will fit up to a 40mm diameter propeller. (1) 3s lipo pack. (1) 90 amp ESC  (1) Steering linkage hh-817, 4-40 rod, and OSE-83106. Options: 1500kv Outrunner motor Notes: This is designed for scale boats in the 25" (650mm) to 35" (900mm) length range and 3-5 pounds total weight.  The manufacturer suggests 1500KV motor with 3s lipo.  If your boat falls within those specs, we suggest a Raider 90amp esc, You will be required to solder connectors onto the motor. This product was added to our catalog on March 31, 2023

    1 in stock

    $219.99

  • CNC-H-5016-R, OSE CNC High Rake Series Props : Brass alloy CNC-H-5016-R, OSE CNC High Rake Series Props : Brass alloy

    OSE CNC-H-5016-R, OSE CNC High Rake Series Props : Brass alloy

    Out of stock

    CNC-H-5016-R, OSE CNC High Rake Series Props : Brass alloy OSE H Series Cleaver 2 Blade Propellers. Made using a brass alloy containing, copper, zinc, & iron.Machine cut to super high tolerances for use right out of the box. No need to balance these props. Due to the strong alloy used with these props, the leading edge of the prop is machined sharp for maximum performance. Shaft Size 3/16" (4.75mm).

    Out of stock

    $59.99

  • Last stock! CTH-83401, OSE Quick Change 5" Rail Motor Mount, for 56mm Motor with 4 bolt pattern

    Speedmaster CTH-83401, OSE Quick Change 5" Rail Motor Mount, for 56mm Motor with 4 bolt pattern

    1 in stock

    Quick Change 5" Rail Motor Mount, for 56mm Motor with 4 bolt pattern

    1 in stock

    $62.48

  • DUB203, Kwik Switch Mount DUB203, Kwik Switch Mount

    DU-BRO DUB203, Kwik Switch Mount

    5 in stock

    DUB203, Kwik Switch Mount

    5 in stock

    $5.99

  • DYNM0102, Dynamite Clear Flexible Waterproof Marine Tape (59') DYNM0102, Dynamite Clear Flexible Waterproof Marine Tape (59')

    Dynamite DYNM0102, Dynamite Clear Flexible Waterproof Marine Tape (59')

    16 in stock

    DYNM0102, Dynamite Clear Flexible Waterproof Marine Tape (59') This is a fifty nine foot roll (18 meters) of Dynamite Clear Flexible Waterproof Marine Tape. This tape is flexible enough to stretch around most corners. The tape will not come loose when it gets wet, and the clear design will not distract from trim schemes. This product was added to our catalog on October 22, 2021

    16 in stock

    $5.99

  • DYNM2210, WP 60A Brushed Marine ESC

    Dynamite DYNM2210, WP 60A Brushed Marine ESC

    Out of stock

    Product Specifications Auto Cutoff Yes Battery Input Lead 16AWG, 4.53 in (115mm) BEC Yes BEC Continuous Current 2A BEC Type Linear BEC Voltage 5V Brakes Yes Connector Type EC3 Drive Type Forward/Brake/Reverse Forward Yes Input Voltage 2S Lipo, 5-7 cells NiMH/NiCd Low-Voltage Cutoff Programmable Yes Motor Type Brushed Resistance .0008 ohms Reverse Yes Time Delay Brake Yes

    Out of stock

    $49.99

  • DYNM3831, 3650 6 Pole Marine Motor 2000Kv

    Dynamite DYNM3831, 3650 6 Pole Marine Motor 2000Kv

    Out of stock

    DYNM3831, 3650 6 Pole Marine Motor 2000Kv Product Details Key Features 2000kV 6-pole design Water-cooled 5.5mm motor bullets Dimensions: 36mm x 56mm Output shaft: 5mm Dia. x 14mm long Weight: 296g Product Specifications Adjustable Timing No Bushing Or Bearing Bearing Connector Type 5.5mm Bullet Efficiency 92% Input Voltage 22.2V max Motor Design Inrunner Number of Poles 6 Outer Diameter 1.42 in (36mm) Output 680W Product Length 2.2" (56 mm) Product Weight 10.4 oz (294.8g) Recommended Speed Control 120A RPM/Volt (Kv) 2000Kv Shaft Diameter 0.20 in (5mm) Shaft Length 0.61 in (15.5mm) Turns 1.5-D

    Out of stock

    $99.99

  • Last stock! DYNM3860, 30A Brushless Marine ESC 2-3S

    Dynamite DYNM3860, 30A Brushless Marine ESC 2-3S

    1 in stock

    DYNM3860, 30A Brushless Marine ESC 2-3S Product Specifications Speed Control Marine Brushless Time Delay Brake Yes Input Voltage 2-3S LiPo, 6-9 cells NiMH Low-Voltage Cutoff Programmable Yes Part Type Electronics Resistance 0.002 ohms Reverse Yes Maximum Burst Current 180A Motor Output Lead 14 AWG, 2.95 in (75mm) Output Connector 4mm Female Bullet Overload Protection Yes Forward Yes Connector Type EC3 BEC Continous Current 1A BEC Maximum Burst Current 2A BEC Type Linear BEC Voltage 6V Brakes Yes Battery Input Lead 14 AWG, 4.33 in (110mm) BEC Yes Auto Cutoff Yes

    1 in stock

    $49.99

  • Last stock! DYNM3865, 60A BL Marine ESC 2-3S

    Dynamite DYNM3865, 60A BL Marine ESC 2-3S

    1 in stock

    DYNM3865, 60A BL Marine ESC 2-3S Key Features Built in switch allows for easy change of battery chemistry type 14awg wires Large 4mm bullet brushless motor connectors Pre-wired with high-current EC3 connectors 60A single (not dual) battery configuration Overview Dynamite, known for it’s performance oriented, value priced aftermarket RC parts, accessories and electronics introduces its lineup of marine electronic speed controls designed specifically high performance marine applications. OEM for most Pro Boat models, Dynamite’s lineup of marine ESC’s offer users with speed controls engineered to meet the performance demands of today’s high speed RC powerboats. Available in varius configurations, each speed control comes built for complete water cooling and were designed to easily handle the power delivered from today’s high output Li-Po batteries. In addition, each ESC comes pre-wired with a NiMH/Li-Po switch providing an easy method of selecting NiMH or Li-Po battery types. Additional programming is easily managed through the optional LED program card. Product Specifications Specs Auto Cutoff Yes Battery Input Lead 3.25" BEC Yes BEC Continous Current 2A BEC Type Linear BEC Voltage 6V Brakes Yes Connector Type EC3 Forward Yes Input Voltage 2S?3S (7.4V?11.1V) Li-Po; 6C?9C (7.2V?10.8V) Ni-MH/Ni-Cd Low-Voltage Cutoff Programmable Yes Maximum Burst Current 360A Maximum Continuous Current 60A Motor Type Brushless Overload Protection Yes Part Type Electronics Product Height 1 in (25.6mm) Product Length 2.4 in (60.5mm) Product Weight 3.3 oz.(93 g) Product Width 1.5 in (38.5mm) Reverse Yes

    1 in stock

    $94.99

  • DYNM3870, Dynamite 90A Brushless Waterproof Marine ESC (2-4S) DYNM3870, Dynamite 90A Brushless Waterproof Marine ESC (2-4S)

    Dynamite DYNM3870, Dynamite 90A Brushless Waterproof Marine ESC (2-4S)

    2 in stock

    DYNM3870, Dynamite 90A Brushless Waterproof Marine ESC (2-4S) This is the Dynamite 90A Brushless Waterproof Marine ESC.  Features:  90A continuous current 2-4S compatible Fully programmable Waterproof and water cooled Single EC3 connector This product was added to our catalog on February 14, 2022

    2 in stock

    $142.99

  • DYNM3875, 20A Brushless Marine ESC 2-6S DUAL CONNECTOR

    Dynamite DYNM3875, 20A Brushless Marine ESC 2-6S DUAL CONNECTOR

    Out of stock

    DYNM3875, 20A Brushless Marine ESC 2-6S DUAL CONNECTOR Product Specifications Auto Cutoff Yes Battery Input Lead 12 AWG BEC Yes BEC Continous Current 5A BEC Maximum Burst Current 10A BEC Type Switching BEC Voltage 6V Brakes Yes Connector Type EC5 Forward Yes Input Voltage 2-6S LiPo, 6-18 Cells NiMH Low-Voltage Cutoff Programmable Yes Maximum Burst Current 720A Output Connector 5.5mm Bullet Overload Protection Yes Part Type Electronics Resistance .0005 ohms Reverse Yes Speed Control Marine Brushless Time Delay Brake Yes This product was added to our catalog on 03/04/2021

    Out of stock

    $159.99

  • Last stock! DYNM3876, 120A BL Marine ESC 2-6S Single Connector

    Dynamite DYNM3876, 120A BL Marine ESC 2-6S Single Connector

    1 in stock

    DYNM3876, 120A BL Marine ESC 2-6S Single Connector Product Specifications Auto Cutoff Yes Battery Input Lead 12 AWG BEC Yes BEC Continous Current 5A BEC Maximum Burst Current 10A BEC Type Switching BEC Voltage 6V Brakes Yes Connector Type IC5 Forward Yes Input Voltage 2-6S LiPo, 6-18 Cells NiMH Low-Voltage Cutoff Programmable Yes Maximum Burst Current 720A Output Connector 5.5mm Bullet Overload Protection Yes Part Type Electronics Resistance .0005 ohms Reverse Yes Time Delay Brake Yes

    1 in stock

    $137.99

  • DYNM3878, 120A BL Marine ESC 2-6S Single Connector

    Dynamite DYNM3878, 120A BL Marine ESC 2-6S Single Connector

    Out of stock

    DYNM3878, 120A BL Marine ESC 2-6S Single Connector Product Specifications Auto Cutoff Yes Battery Input Lead 12 AWG BEC Yes BEC Continous Current 5A BEC Maximum Burst Current 10A BEC Type Switching BEC Voltage 6V Brakes Yes Connector Type IC5 Forward Yes Input Voltage 2-6S LiPo, 6-18 Cells NiMH Low-Voltage Cutoff Programmable Yes Maximum Burst Current 720A Output Connector 5.5mm Bullet Overload Protection Yes Part Type Electronics Resistance .0005 ohms Reverse Yes Time Delay Brake Yes

    Out of stock

    $128.99

  • DYNM3880, 160A 4-8S Brushless Waterproof Marine ESC

    Dynamite DYNM3880, 160A 4-8S Brushless Waterproof Marine ESC

    Out of stock

    DYNM3880, 160A 4-8S Brushless Waterproof Marine ESC

    Out of stock

    $226.99

  • DYNM3898, 2848 4 Pole BL Marine Motor 3000Kv

    Dynamite DYNM3898, 2848 4 Pole BL Marine Motor 3000Kv

    Out of stock

    DYNM3898, 2848 4 Pole BL Marine Motor 3000Kv

    Out of stock

    $99.99

  • DYNM3915, Dynamite 3674 4-Pole Brushless Marine Motor (1900kV) DYNM3915, Dynamite 3674 4-Pole Brushless Marine Motor (1900kV)

    Dynamite DYNM3915, Dynamite 3674 4-Pole Brushless Marine Motor (1900kV)

    Out of stock

    DYNM3915, Dynamite 3674 4-Pole Brushless Marine Motor (1900kV) This is a replacement Dynamite 1990kV, 3674 4-Pole Brushless Marine Motor. This motor is a replacement for the Pro Boat Sonicwake 36" Deep V Boat. This product was added to our catalog on 03/04/2021

    Out of stock

    $109.99

  • HRADCB311AR06, Hot Racing Traxxas M41 Aluminum Adjustable Trim Tabs (2) HRADCB311AR06, Hot Racing Traxxas M41 Aluminum Adjustable Trim Tabs (2)

    Hot Racing HRADCB311AR06, Hot Racing Traxxas M41 Aluminum Adjustable Trim Tabs (2)

    10 in stock

    HRADCB311AR06, Hot Racing Traxxas M41 Aluminum Adjustable Trim Tabs (2) Hot Racing Traxxas M41 Aluminum Adjustable Trim Tabs.  Features: Adjusts angle of trim tab assembly for proper hull planing CNC machined aluminum construction Pre-drilled holes for easy mounting Anodized blue for durability, corrosion resistance, and great looks Specifications: Weight: 0.78oz Length: 33mm (1.30 inches) Width: 30mm (1.18 inches) Height: 24.5mm (.96 inches) NOTE: Uses the stock 4x12mm screws to mount on boat. This product was added to our catalog on December 16, 2021

    10 in stock

    $34.99

  • HRADCB48DR06, Traxxas M41 Hot Racing Dual Pickup Rudder Blade Blue HRADCB48DR06, Traxxas M41 Hot Racing Dual Pickup Rudder Blade Blue

    Hot Racing HRADCB48DR06, Traxxas M41 Hot Racing Dual Pickup Rudder Blade Blue

    3 in stock

    HRADCB48DR06, Hot Racing Dual Pickup Rudder Blade Blue M41 Dual Pickup Rudder Blade, compatible with Traxxas M41 Boat FEATURES CNC machined billet aluminum construction Dual water pickup for additional cooling Blue anodized finish for durability, corrosion resistance, and great looks Direct installation with no modification necessary REQUIREMENTS Adding a second water line and a water outlet Installing and attaching linkage, water line, and dual water outlet COMMENTS Replaces Traxxas factory TRA5779 rudder blade For ultimate cooling, combine with Hot Racing SPN36WC01 CNC milled aluminum cooling jacket and SPN28WE06 dual port cooling outlet This product was added to our catalog on December 16, 2021

    3 in stock

    $43.99

  • HRASPN311AR06, Hot Racing Traxxas Spartan Aluminum Adjustable Trim Tab Set (Blue)

    Hot Racing HRASPN311AR06, Hot Racing Traxxas Spartan Aluminum Adjustable Trim Tab Set (Blue)

    18 in stock

    HRASPN311AR06, Hot Racing Traxxas Spartan Aluminum Adjustable Trim Tab Set (Blue) Hot Racing Traxxas Spartan Aluminum Adjustable Trim Tab Set.  Features: Adjusts angle of trim tab assembly for proper hull planing CNC machined aluminum construction Pre-drilled for mounting Anodized blue for durability, corrosion resistance, and great looks Specifications: Weight: 0.78oz length: 33mm (1.30 inches) width: 30mm (1.18 inches) height: 24.5mm (.96 inches) NOTE: Use the stock 4x12mm screws to mount This product was added to our catalog on December 16, 2021

    18 in stock

    $39.99

  • HRASPN48DR06, Hot Racing Traxxas Spartan Aluminum Dual Pickup Rudder Blade

    Hot Racing HRASPN48DR06, Hot Racing Traxxas Spartan Aluminum Dual Pickup Rudder Blade

    4 in stock

    HRASPN48DR06, Hot Racing Traxxas Spartan Aluminum Dual Pickup Rudder Blade This is the optional Hot Racing Aluminum Dual Pickup Rudder Blade for use with the Traxxas Spartan Boat. Features: CNC machined billet aluminum construction Dual water pickup for additional cooling Blue anodized finish for durability, corrosion resistance, and great looks Direct installation with no modification necessary Specifications: Width of top of rudder blade: 30.8mm (1.21 inches) Width of bottom of rudder blade: 25.3mm (1.00 inches) Total rudder length: 100mm (3.94 inches) Requires: Adding a second water line and a water outlet Installing and attaching linkage, water line, and dual water outlet Comments: Replaces Traxxas factory TRA5740 rudder blade For ultimate cooling, combine with Hot Racing SPN36WC01 CNC milled aluminum cooling jacket and SPN28WE06 dual port cooling outlet This product was added to our catalog on March 16, 2021

    4 in stock

    $29.99

  • HRASPN56TF06, Hot Racing Traxxas Spartan Aluminum Adjustable Turn Fins HRASPN56TF06, Hot Racing Traxxas Spartan Aluminum Adjustable Turn Fins

    Hot Racing HRASPN56TF06, Hot Racing Traxxas Spartan Aluminum Adjustable Turn Fins

    2 in stock

    HRASPN56TF06, Hot Racing Traxxas Spartan Aluminum Adjustable Turn Fins Hot Racing Traxxas Spartan Aluminum Adjustable Turn Fins will help your boat turn faster, provide better straight-line handling, and will increase overall stability. Features: Increases performance and handling CNC machined aluminum construction Blue anodized finish Easy to install Light weight Adjustable Includes: (2) aluminum turn fins (2) aluminum turn fin mounting brackets (2) 3mm lock nuts (2) socket head cap screws This product was added to our catalog on March 16, 2021

    2 in stock

    $29.99

  • KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger

    KYOSHO KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger

    Out of stock

    KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger The Kyosho Wave Chopper 2.0 Type 1 Electric Personal Water Craft brings fun to the water with the revival of the Wave Chopper! Originally released in 2001, the Wave Chopper 2.0 features modern RC technology and performance. A redesigned rudder, stern tube and motor mount in the 1/6th hull, and an updated rider figure are combined with the latest RC components to take this model into the next generation. Optimal torque from the G14L water cooled 550 class motor works perfectly with the large capacity Kyosho Speed House KA60-91W speed controller to deliver crisp acceleration and racy performance while reducing heat loss. Styrene floats provide buoyancy that make the hull unsinkable, even if it is not completely waterproof. The hull and rider are pre-assembled, so all you need to do is install four AA batteries (sold separately) into the transmitter, charge the included NiMH battery, and mount the rider figure to get this model fully ready to run.  Features: Kick up rudder protects both the rudder and hull from unexpected contact and delivers smooth turning performance Built in water intake channels water into the cooling jacket on the motor for effective cooling Optimal angle of the stern tube along the bottom of the hull reduces drive resistance allowing the fully submerged propeller to generate quick and smooth acceleration Pre-installed 550 class G14L motor is fitted with a water cooling system to prevent heat loss High rigidity suspended motor mount maximizes drive efficiency and easy maintenance 7.2V 2200mah battery and USB delte peak charger are included with the pre-assembled hull and 2.4ghz transmitter Specifications: Length: 595mm Width: 220mm Height: 350mm Weight: 1,600g approx. Transmitter: KT-231P+ ESC: KYOSHO SPEED HOUSE KA060-91W         Servo: KS4031-06W Motor: 550-class G14L motor with water-cooling jacket Battery: 7.2V-2200mAh NiMH Compatible battery size: 148x52x30mm or less (LxWxH) Charger: Ni-MH battery dedicated USB charger Propeller: D31xP1.4 (Polycarbonate) Maximum speed: 24km/h approx. Operation time: 5 min approx. Includes: Fully assembled hull Syncro KT231P+ transmitter Injection molded boat stand Pre painted figure Hex wrenches 1.5 & 2.5mm Spanner 4.0 & 5.5mm Antenna tube 7.2V 2200 mAh Ni-MH battery and USB delta peak charger PVC tape for waterproofing Needed to Complete: (4) AA batteries for transmitter This product was added to our catalog on May 3, 2023

    Out of stock

    $249.99

  • KYO40462ST2, Kyosho Seawind ReadySet Racing Yacht w/KT-431S 2.4GHz Radio KYO40462ST2, Kyosho Seawind ReadySet Racing Yacht w/KT-431S 2.4GHz Radio

    KYOSHO KYO40462ST2, Kyosho Seawind ReadySet Racing Yacht w/KT-431S 2.4GHz Radio

    3 in stock

    KYO40462ST2, Kyosho Seawind ReadySet Racing Yacht w/KT-431S 2.4GHz Radio Kyosho Seawind ReadySet Racing Yacht. The large aspect ratio of the long span keel and tight response from the push-pull rudder control make up the Seawind's race-ready specifications. Sharp acceleration brings the Seawind quickly up to full speed while exceptional energy efficiency delivers maximum stability in light winds so you can use light breeze like a pro. The classic design features a molded one-piece ABS hull factory finished in a beautiful color design that comes fitted with a 2.4GHz RC system that automatically manages frequency band selection. The sail and rudder servos are waterproof and deliver exceptional reliability under various conditions. Features: Readyset installed with 2.4Ghz R/C system realized at a value price Pre-assembled one-piece ABS hull complete with coloring The aluminum mast and boom are hard anodized for extra strength Features extruded high strength aluminum mast and boom Features pre-cut and sewn spin cloth main and jib sails Large aspect ratio keel provides low resistance and excellent performance even under strong winds The super strong structure features shaft from deck through to the ballast Ballast is lead-free for environmentally friendly specifications Equipped with a rubber cap for easy release of water from the hull Packed with accessory parts for extra detail as a display model Push-pull rudder and sail control provide sure control for sharp racing performance Features waterproof sail and rudder servo The main mast, keel, ballast and rudder can be detached without the use of any tools Specifications: Length: 998mm Width: 226mm Height: 1,850mm Weight: 3,100g R/C System: Syncro KT-431S, 2.4GHz, FHSS Sail Area: 39dm2 Servo: Sail KS9071-20SW / Rudder KS4031-06W Needed to Complete: (8) AA Batteries This product was added to our catalog on April 14, 2023

    3 in stock

    $449.99

  • Last stock! LEO-2860-X2, Leopard 2860 X2 Motor

    OSE LEO-2860-X2, Leopard 2860 X2 Motor

    1 in stock

    LEO-2860-X2, Leopard 2860 X2 Motor 28mm Diameter by 64mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 85%. Comes with high quality bearings and neodymium magnets for high power. Vent cutouts in the front and rear end bells allow air to circulate for additional cooling. Specifications: Magnets: Neodymium Watts: 600 with upto 1200 burst. Poles: 4 Motor Shaft Diameter: 4mm with flat spot Can Measures: 28mm diameter x 64mm long Weight: 190 Grams Mounting screw diameter required: 3mm threads. Mounting Holes: 2 mounting patterns for ease of installation. Both 16mm & 19mm apart. Works with all the 380 Motor mounts we sell. Includes Leopard male bullet plugs soldered to the motor and a matching set for your esc connection

    1 in stock

    $64.99

  • Last stock! LEO-4082X2, Leopard 4082X2, 2200Kv X2 1.5Y Brushless Motor LEO-4082X2, Leopard 4082X2, 2200Kv X2 1.5Y Brushless Motor

    Leopard LEO-4082X2, Leopard 4082X2, 2200Kv X2 1.5Y Brushless Motor

    1 in stock

    LEO-4082X2, Leopard 4082X2, 2200Kv X2 1.5Y Brushless Motor Leopard 4082 brushless motor.The Leopard has been the standard in High value/High quality at a low cost motor on the market. Leopard has released a new version of the popular 1600kv and 2200kv sizes, called the X2.40mm Diameter by 82mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes end-bells that are assembled with screws for both strength and ease of maintenance.

    1 in stock

    $149.95

  • Last stock! LEO-4092, Leopard 4092 1480 Kv Motor w/ Water Cooling Jacket LEO-4092, Leopard 4092 1480 Kv Motor w/ Water Cooling Jacket

    Leopard LEO-4092, Leopard 4092 1480 Kv Motor w/ Water Cooling Jacket

    1 in stock

    LEO-4092, Leopard 4092 1480 Kv Motor w/ Water Cooling Jacket Leopard 4092 brushless motor.40mm Diameter by 92mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance. Motor Specs:Magnets: neodymiumWatts: 2600 with Over 4200 Burst.Poles: 4Motor Shaft: 5mm with flat spotCan Measures: 40mm diameter x 92mm longWeight: 492 GramsMounting screw diameter required: 3mmBearing size: 5mm wide x 16mm od x 5mm idMounting Holes 25mm apart for use with most 540 mounts. Includes Leopard 6.0mm male bullet plugs soldered to the motor and a matching set for your esc connection. The Leopard Red anodized aluminum water cooling jacket is designed to allow water to come in direct contact with the motor and flow around it allowing maximum cooling.Installation is a snap!Apply some oil to both your motor housing and o-rings, then slide on the jacket. Water Cooling Jacket Specs:Outside diameter 47mm.Length 50mm Long. This product was added to our catalog on June 1, 2023

    1 in stock

    $149.99

  • LEO-56110, Leopard 56110 Motor

    Speedmaster LEO-56110, Leopard 56110 Motor

    2 in stock

    Leopard 56110 brushless motorSpecial while supplies last, includes water Jacket with Leopard Motor Purchase!56mm Diameter x 110mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%.Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.Specs:Magnets: NeodymiumWatts: 5000 with Over 6000 Burst.Poles: 4Motor Shaft: 8mmCan Measures: 56mm diameter x 110mm longMounting screw diameter required: 4mmMounting Holes 30mm apartWeighs: 40.5 ouncesBearing size: 8mm wide x 19mm od x 6mm idIncludes Leopard 6.0mm male bullet plugs soldered to the motor and a matching set for your esc connection. OSE Suggests 20,000-35,000 total rpm for boats. We suggest most Fast Electric Boaters should run in the 25,000RPM range for Sport Boating or 30,000RPM Range for racing. These are only guidelines, we suggest if you do not have the knowledge to pick the correct motor, please consult us first or other members of the rc fast electric boating community. Either at a local club or on our OSE Forums.

    2 in stock

    $233.99

  • Last stock! LEO-5692, Leopard 5692, 730Kv Brushless Motor LEO-5692, Leopard 5692, 730Kv Brushless Motor

    Leopard LEO-5692, Leopard 5692, 730Kv Brushless Motor

    1 in stock

    Leopard LBP5692/3Y 730KV 4-Poles Inrunner Brushless Motor (1M-1.8M Boat)

    1 in stock

    $299.99

  • MVK28107, MSRS-249 2 in 1 Receiver/ESC 2.4GHZ, fits all Ion Models

    Maverick MVK28107, MSRS-249 2 in 1 Receiver/ESC 2.4GHZ, fits all Ion Models

    6 in stock

    MSRS-249 2 in 1 Receiver/ESC 2.4GHZ, fits all Ion Models "2 in 1" combined ESC and 2.4GHz Receiver unit for the Maverick iON range of cars.Features:WaterproofForward, Reverse & Brake Linear OperationAutomatic Setup SystemOver Current ProtectionThermal ProtectionLow Voltage ProtectionSpecification:Max Current: 20A Drive / 15A ReverseInput: 6.0-8.4VMotor Limit: 20 Turn 370 BrushedBEC: 6.0VCase dimensions: 35.1x25.3x14mmWeight: 7.4g with connectors and switch

    6 in stock

    $44.99

  • Last stock! OC6DM, Drive Dog  3/8" Diameter

    Octura OC6DM, Drive Dog 3/8" Diameter

    1 in stock

    OC6DM, Drive Dog 3/8" Diameter

    1 in stock

    $3.25

  • OC8DM, Drive Dog 7/16" Diameter

    Octura OC8DM, Drive Dog 7/16" Diameter

    2 in stock

    OC8DM, Drive Dog  7/16" Diameter

    2 in stock

    $5.25

  • Last stock! OCFHE4MM13, Octura Coupler Flex Hex 4mm to .130 Cable OCFHE4MM13, Octura Coupler Flex Hex 4mm to .130 Cable

    Octura OCFHE4MM13, Octura Coupler Flex Hex 4mm to .130 Cable

    1 in stock

    OCFHE4MM13, Octura Coupler Flex Hex 4mm to .130 Cable Octura Flex Hex Coupler 4mm to  to .130 Flex Cable

    1 in stock

    $16.99

  • OCFHE5MM18, Octura Coupler Flex Hex 5mm to .187 Cable

    Octura OCFHE5MM18, Octura Coupler Flex Hex 5mm to .187 Cable

    5 in stock

    OCFHE5MM18, Octura Coupler Flex Hex 5mm to .187 Cable

    5 in stock

    $16.25

  • OCT-OC9204, Octura Auto Bailer

    Octura OCT-OC9204, Octura Auto Bailer

    4 in stock

    OCT-OC9204, Octura Auto Bailer

    4 in stock

    $8.99

  • OCT-x430, Octura x430

    Octura OCT-x430, Octura x430

    4 in stock

    OCT-x430, Octura x430

    4 in stock

    $19.99

  • OCT-x430r, Octura x430r

    Octura OCT-x430r, Octura x430r

    5 in stock

    OCT-x430r, Octura x430r

    5 in stock

    $19.99

  • OCT-x438, Octura x438

    Octura OCT-x438, Octura x438

    Out of stock

    OCT-x438, Octura x438

    Out of stock

    $20.47

  • OCT-x440, Octura x440

    Octura OCT-x440, Octura x440

    Out of stock

    OCT-x440, Octura x440

    Out of stock

    $22.08

  • OCT-x440/3, Octura x440/3

    Octura OCT-x440/3, Octura x440/3

    Out of stock

    OCT-x440/3, Octura x440/3

    Out of stock

    $24.31

  • OCT-x442, Octura x442

    Octura OCT-x442, Octura x442

    Out of stock

    OCT-x442, Octura x442

    Out of stock

    $22.08


I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"

Recently viewed products

© 2024 Caloosa Trains And Hobbies,

    Login

    Forgot your password?

    Don't have an account yet?
    Create account