PTK-1102-WHT, ProTek RC Universal Chassis Protective Sheet (White) (2) (12.5x33.5cm)
The ProTek RC Universal Uncut "Thick" Chassis Protective Sheet is 12.5cm wide by 33.5cm long and designed for universal use. This protective sheet is made from thick laminate and backed by an aggressive adhesive vinyl.
Protective sheets are highly recommended for use on new and used chassis to resist against scratches and scrapes and prolong the life of the chassis. For best results, always replace the sheet when noticeable wear occurs.
In addition to protecting the chassis, this sheet also provides a slick and smooth chassis surface which reduces friction when contacting the race surface - especially clay! If you happen to land hard and bottom out, your buggy should more easily slide through it and maintain momentum.
Features:
Made from genuine 3M® material
Thick long lasting laminate
Protects against scratches and wear
Keeps chassis looking new
Uncut for universal use
Made in the USA
12.5cm (4.9") wide x 33.5cm (13.2") long
Available in a variety of colors
Includes two sheets
This product was added to our catalog on January 16, 2024
PTK-130T, ProTek RC 130T Standard Digital "High Torque" Metal Gear Servo (High Voltage)
This is the ProTek R/C 130T Digital Hi-Torque Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.
The ProTek R/C 130T High Voltage Hi-Torque servo delivers an incredible 288 oz-in of torque with a 0.10 transit speed at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 355 oz-in and 0.08! Spec's like these make this servo an excellent choice for any 1/10 to 1/8 scale vehicle application. Other features include a full metal gear train that is supported by dual ball bearings, a 200mm long 22awg connector wire with gold plated connectors, a coreless motor and an aluminum middle case that helps to dissipate heat and helps to increase efficiency.
Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.
Warning! This ProTek R/C servo requires that you use a m3x10mm screw to attach the servo horn to the output shaft. If you choose to use another screw, be sure to use a 10mm length screw. Use of a shorter screw can cause failure and will void your warranty.
Features:
Ideal for any 1/10 to 1/8 scale vehicle application
Aluminum middle case
High voltage circuitry
0.10 transit speed, and 288 oz-in of torque @ 6.0V
0.08 transit speed, and 355 oz-in of torque @ 7.4V
Aluminum single arm servo horn
Full metal gears and dual ball bearings
200mm long 22awg connector wire w/gold plated connectors
Coreless motor
Servo Model
130T
Recommended Application
1/10 to 1/8 scale surface
Operating Voltage
4.8V - 7.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.10/60° sec
Operating Speed @ 7.4V
0.08/60° sec
Dynamic Torque @ 6.0V
288 oz-in (20.7 kg-cm)
Dynamic Torque @ 7.4V
355 oz-in (25.6 kg-cm)
Motor Type
High Efficiency Coreless Motor
Output Shaft
25 Tooth
Gears
Metal
Weight
61g
Pulse/Frequency
1520?s / 333hz
This product was added to our catalog on December 16, 2021
PTK-140T, ProTek RC 140T Low Profile High Torque Metal Gear Servo (High Voltage)
This is the ProTek R/C 140T Low Profile Digital "High Torque" Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.
The ProTek R/C 140T High Voltage Low Profile servo delivers an impressive 185 oz-in of torque and 0.10 transit speed at 6.0V, and when you bump the voltage to 7.4V the spec's increase to 215 oz-in and 0.08 transit speed! This servo does not stop there, when cranked up to 8.4V you can see 230 oz-in and 0.07 transit speed. These specs make for an excellent choice for 1/12 or 1/10 scale RC vehicles. Other features include a plastic case with an aluminum center band for heat dissipation, a metal gear train with dual ball bearings, 160mm long 22awg connector wire and a coreless motor.
As most 1/12 or 1/10 scale vehicles come with, or require, a specific servo horn, this servo comes ready to be equipped with a servo horn of your needing (Not included). Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.
Features:
Low-Profile case saves space and weight
Ideal for any 1/12 to 1/10 scale vehicle application
Plastic case with aluminum center band
High voltage circuitry
0.10 transit speed, and 185 oz-in of torque @ 6.0V
0.08 transit speed, and 215 oz-in of torque @ 7.4V
0.07 transit speed, and 230 oz-in of torque @ 8.4V
Full metal gears and dual ball bearings
160mm long 22awg connector wire
Coreless motor
Servo Model
140T
Recommended Application
1/12 to 1/10 scale Surface
Operating Voltage
4.8V - 8.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.10/60° sec
Operating Speed @ 7.4V
0.08/60° sec
Operating Speed @ 8.4V
0.07/60° sec
Dynamic Torque @ 6.0V
185 oz-in (13.3 kg-cm)
Dynamic Torque @ 7.4V
215 oz-in (15.5 kg-cm)
Dynamic Torque @ 8.4V
230 oz-in (16.6 kg-cm)
Motor Type
Coreless Motor
Output Shaft
25 Tooth
Gears
Metal
Weight
49.8g
Pulse/Frequency
1520Us / 333hz
Dimensions
39.5x30.5x20mm
This product was added to our catalog on August 18, 2021
PTK-1540, ProTek RC "TruShield" RC Car Detail Spray (13oz)
This is a 13 ounce can of ProTek R/C "TruShield" RC Car Detail Spray. ProTek R/C understands that how your ride looks is as important as how well it performs. We all want to shine, but a clean car is not all about showing off; dirt and grime can slow a car down, kill bearings and lower overall performance. Sometimes running at your peak can just be a wash away.
The ProTek R/C TruShield is a one step easy to use product that provides a quick detail shine. Designed to be used on all surfaces of your dirt machine, TruShield provides a glossy protective coating that is dry to the touch when used as directed. It can be sprayed on plastic, metal, rubber and chrome. The product is user friendly, simple to use, dries fast and will not leave an oily residue or sticky finish. Simply spray on a cloth or vehicle and wipe to a shine! It’s the fastest and easiest way to detail and shine your dirt machines. TruShield thoroughly and effectively shines and promotes luster, and will not attract dirt, dust or general grime.
Use Recommendations:
Use as the final step after cleaning your car or when you want to add a "Tru" shine to your equipment. Shake well and spray a light coat onto your surface, or spray onto clean cloth and allow to penetrate for a few minutes. Wipe off to leave an even film. Remove any excess residue.
When it comes to high quality products that are backed by incredible customer support, ProTek R/C has you covered with the products you need to keep your rig ready for action, no matter what.
This product was added to our catalog on December 16, 2021
PTK-1570, ProTek RC CA Tire Glue w/Glue Tip (Medium) (0.75oz)
This is a 0.75 ounce bottle of ProTek R/C CA Tire Glue in Medium thickness. ProTek R/C CA Glue is a high performance clear cyanoacrylate with a medium viscosity that ensures gap penetration with a relatively quick 5-10 minute dry time.
ProTek R/C CA Tire Glue is ideal for mounting rubber tires onto R/C car plastic wheels, but is ideal for a wide variety of applications and will bond nearly anything; ProTek R/C CA Tire Glue is not foam safe however.
Features:
Medium viscosity
5-10 minute dry time
Ideal for gluing R/C tires
Bonds nearly any material
Compact, pocket sized bottle
One glue tip included (also available separately: PTK-1571)
NOTE:
This glue is not foam safe.
Store in cold dry environment
This product was added to our catalog on December 16, 2021
PTK-1572, ProTek RC Blue Thread Lock (Medium) (0.34oz)
ProTek R/C Blue Thread Locker is a medium thickness, medium strength formula that provides great resistance towards shocks and vibrations, yet still allows hardware to be removed and disassembled with hand tools. It is a must-have item for 1/8 scale use, 1/10 scale use and especially any vehicle or aircraft with a nitro engine. ProTek R/C Blue Thread Lock also helps to prevent rusting of threads.
For use, simply apply the fluid to the threads of your non-plastic fastener or nut, and tighten. In the absence of air, the fluid will start to cure in about 10 minutes, with a finished full cure in about 24 hours.
Specifications:
Size: 0.34 fl oz. (10ml)
Strength: Blue - Medium
Removable: Yes
Permanent Lock: No
Cure Time: Sets in 10 minutes; full cure in 24 hours
Use: Any non-plastic screw, fastener, nut or bolt
This product was added to our catalog on December 16, 2021
PTK-160SS, ProTek RC 160SS Low Profile Super Speed Metal Gear Servo High Voltage/Metal Case
This is the ProTek R/C 160SS Low Profile Digital "Super Speed" Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.
The ProTek R/C 160SS High Voltage Low Profile servo delivers an incredible 127 oz-in of torque and 0.05 transit speed at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 152 oz-in and 0.04! Spec's like these make this servo an excellent choice for any 1/12 to 1/10 scale vehicle application. Other features include a full aluminum case that provides bomb proof durability and improved heat dissipation, a metal gear train that is supported by dual ball bearings, a 160mm long 22awg connector wire with gold plated connectors, and a coreless motor.
Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. And for additional rigidity, four blue aluminum servo ear guides are included as alternatives to the rubber grommets. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.
Features:
Low-Profile case saves space and weight
Ideal for any 1/12 to 1/10 scale vehicle application
Full aluminum case
High voltage circuitry
0.05 transit speed, and 127 oz-in of torque @ 6.0V
0.04 transit speed, and 152 oz-in of torque @ 7.4V
Aluminum single arm servo horn
Full metal gears and dual ball bearings
160mm long 22awg connector wire w/gold plated connectors
Coreless motor
Servo Model
160SS
Recommended Application
1/12 to 1/10 scale Surface
Operating Voltage
4.8V - 7.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.05/60° sec
Operating Speed @ 7.4V
0.04/60° sec
Dynamic Torque @ 6.0V
127 oz-in (9.1 kg-cm)
Dynamic Torque @ 7.4V
152 oz-in (11 kg-cm)
Motor Type
High Efficiency Coreless Motor
Output Shaft
25 Tooth
Gears
Metal
Weight
54.5g
Pulse/Frequency
1520?s / 333hz
This product was added to our catalog on March 19, 2021
PTK-160T, ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
This is the ProTek R/C 160T Low Profile Digital "High Torque" Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.
The ProTek R/C 160T High Voltage Low Profile servo delivers an incredible 216 oz-in of torque and 0.08 transit speed at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 274 oz-in and 0.06! Spec's like these make this servo an excellent choice for any 1/12 to 1/10 scale vehicle application. Other features include a full aluminum case that provides bomb proof durability and improved heat dissipation, a metal gear train that is supported by dual ball bearings, a 160mm long 22awg connector wire with gold plated connectors, and a coreless motor.
Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. And for additional rigidity, four blue aluminum servo ear guides are included as alternatives to the rubber grommets. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.
Features:
Low-Profile case saves space and weight
Ideal for any 1/12 to 1/10 scale vehicle application
Full aluminum case
High voltage circuitry
0.08 transit speed, and 216 oz-in of torque @ 6.0V
0.06 transit speed, and 274 oz-in of torque @ 7.4V
Aluminum single arm servo horn
Full metal gears and dual ball bearings
160mm long 22awg connector wire w/gold plated connectors
Coreless motor
Servo Model
160T
Recommended Application
1/12 to 1/10 scale Surface
Operating Voltage
4.8V - 7.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.08/60° sec
Operating Speed @ 7.4V
0.06/60° sec
Dynamic Torque @ 6.0V
216 oz-in (15.5 kg-cm)
Dynamic Torque @ 7.4V
274 oz-in (19.7 kg-cm)
Motor Type
High Efficiency Coreless Motor
Output Shaft
25 Tooth
Gears
Metal
Weight
54.5g
Pulse/Frequency
1520?s / 333hz
Dimensions
39.5x20x30.3mm
Length (Bottom to Mount)
19.10mm
This product was added to our catalog on December 16, 2021
PTK-160TBL, ProTek RC 160TBL "Black Label" Low Profile High Torque Brushless Servo
Brushless servo technology has improved by leaps and bounds. Finally, brushless servos can deliver holding power, speed and precision that can compete with a coreless servo. Combine that with the superior efficiency and lifespan of a brushless motor and you have a servo that hits all the marks, with the performance and quality required for a pro level build.
A black anodized aluminum case with aluminum and gold accents give this servo a stealthy look that sets it apart from the rest. The aluminum upper case provides bomb proof durability and the heat sink center case offers efficient heat dissipation and helps to reduce weight. An aluminum, single arm clamping servo horn is included, as well as a full set of servo mounting washers for a rock solid and durable installation.
NOTE: If you experience glitching or poor performance while using a Futaba transmitter, you must turn off BLS mode. BLS mode is only compatible with Futaba BLS type servos.
Features:
Used by Ryan Maifield to win the 2019 Roar 4wd Off-Road National Championships
Ideal for any 1/10 to 1/8 surface application that can benefit from a low profile configuration
Full aluminum black anodized case
High voltage circuitry
0.08 transit speed, and 230 oz-in of torque @ 6.0V
0.06 transit speed, and 290 oz-in of torque @ 7.4V
Includes aluminum single arm clamping servo horn and servo mounting washers for a rock solid installation
140mm long servo lead
Full metal gears and dual ball bearings
Brushless motor
Servo Model
160TBL
Recommended Application
1/10 to 1/8 Scale Surface
Operating Voltage
4.8V - 7.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.08/60° sec
Operating Speed @ 7.4V
0.06/60° sec
Dynamic Torque @ 6.0V
230 oz-in (16.5 kg-cm)
Dynamic Torque @ 7.4V
290 oz-in (20.9 kg-cm)
Motor Type
Brushless
Output Shaft
25 Tooth
Gears
Metal
Weight
55g
Pulse/Frequency
1520?s / 333hz
Dimensions
39.5x20x30.6mm
Length (Bottom to Mount)
19.35mm
This product was added to our catalog on May 23, 2023
PTK-1610, ProTek RC "TruGrip" Maximum Traction Tire Compound (4oz)
The ProTek R/C TruGrip Maximum Compound is ideal for racers looking to break-in new tires and when maximum tire softening is desired. It is a great solution for damp, wet or extra slick track surfaces and cool outdoor temperatures. The Maximum compound is the most "potent" of the three compounds.
This product was added to our catalog on December 16, 2021
PTK-1630, ProTek RC "TruGrip" Light Traction Tire Compound (4oz)
This is a 4 ounce bottle of ProTek R/C "TruGrip" Light Traction Tire Compound. There is no such thing as too much grip and ProTek R/C is here to provide it with their specially formulated TruGrip line of tire traction compounds. Available in three different compounds to suit a variety of conditions, TruGrip has you covered with their Light, Medium and Maximum compounds for you to choose from. For on-road, off-road, rubber or foam tires, TruGrip is the sauce for your winning recipe.
The ProTek R/C TruGrip Light Compound is ideal for mild applications when a slight increase in traction is desired. It is a great solution for hard, fast tracks and hotter outdoor ambient temperatures; great for loose, dusty and sandy conditions. The Light compound is the least "potent" of the three compounds.
ProTek RC "TruGrip" Traction Compounds For RC Tires: AMain Hobbies' RC Talk
TruGrip Compounds:
Light: Hotter temperatures, hard-packed fast dry dusty tracks
Medium: Moderate temperatures, marginal tracks, light moisture or dry slick conditions
Maximum: Cool temperatures, damp or wet extra slick tracks
When it comes to high quality products that are backed by incredible customer support, ProTek R/C has you covered with the products you need to keep your rig ready for action, no matter what.
This product was added to our catalog on December 16, 2021
PTK-1KTBL, ProTek RC 1KTBL Black Label Ultra High Torque Brushless Waterproof Crawler Servo (High Voltage/Metal Case) (Digital)
The ProTek 1KTBL was developed to satisfy the needs of torque thirsty enthusiasts. With the ability to deliver over 1000 oz-in of torque and .11 transit speeds at 8.4V, there aren't many servo options that can compete. Competition rigs, heavy scalers and bashers can take advantage of what the 1KTBL delivers. Even large scale surface models and airplanes can benefit from the insane torque the 1KTBL can produce.
All this power means nothing without durability - and the Protek 1KTBL punches far outside its weight class. This servo offers the power, reliability and durability needed to keep the competition on the ropes. The proven gasket system allows waterproof protection up to 1-meter, so it will go the distance in any condition. A full steel gear train, 25T output shaft and full aluminum machined heat sink case finish off the package to create a tough servo that is perfect for demanding applications. The 1KTBL delivers power in excess - with the durability and reliability that make ProTek R/C servos a an easy choice for enthusiasts that expect the most from their rigs.
NOTE:
For best results, and peak performance, we recommend you power this servo with a BEC.
If you experience glitching or poor performance while using a Futaba transmitter, you must turn off BLS mode. BLS mode is only compatible with Futaba BLS type servos.
Requires a servo extension lead for a drop-in TRX-4 fit.
Features:
Ideal for a variety of applications
Waterproof up to 1 meter
880 oz-in of torque @ 6.0V, and .16 transit speed
1080 oz-in of torque @ 8.4V, and .11 transit speed
Brushless motor
High voltage circuitry
Full steel gears
Full aluminum black anodized heat sink case
Dual ball bearings
260mm servo lead
Servo Model
1KTBL
Recommended Application
Crawlers, Bashers & Large Scale
Operating Voltage
4.8V - 8.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.16/60° sec
Operating Speed @ 8.4V
0.11/60° sec
Dynamic Torque @ 6.0V
880 oz-in (63.6 kg-cm)
Dynamic Torque @ 8.4V
1080 oz-in (77.7 kg-cm)
Stall Current @ 6.0V
7.7A
Stall Current @ 8.4V
8.3A
Motor Type
Brushless Digital
Output Shaft
25 Tooth
Gears
Steel
Weight
81g
Pulse/Frequency
1520s / 333hz
Dimensions
41x21x39.5mm
Length (Bottom to Mount)
30mm
This product was added to our catalog on June 17, 2023
