PTK-2107, ProTek RC Braided Brushless Motor Sensor Cable (90mm)
This is a ProTek R/C Braided Brushless Motor Sensor Cable. This sensor cable is intended for use with any sensor-based brushless system that uses a replaceable sensor wire harness.
The ProTek R/C sensor cable features flexible silicone wire shielding on each of the six sensor wires, with a black braided nylon protective sheath surrounding the sensor wires. Additionally, the braided sheath is shrink wrapped at each end providing complete protection to the cable. This protection and flexibility leads to a free moving and shock absorbing sensor cable while ensuring smooth, consistent and reliable data transfer between your ESC and motor. Choose from between 90mm and 300mm lengths.
This product was added to our catalog on December 16, 2021
PTK-2109, ProTek RC Braided Brushless Motor Sensor Cable (300mm)
This is a ProTek R/C Braided Brushless Motor Sensor Cable. This sensor cable is intended for use with any sensor-based brushless system that uses a replaceable sensor wire harness.
The ProTek R/C sensor cable features flexible silicone wire shielding on each of the six sensor wires, with a black braided nylon protective sheath surrounding the sensor wires. Additionally, the braided sheath is shrink wrapped at each end providing complete protection to the cable. This protection and flexibility leads to a free moving and shock absorbing sensor cable while ensuring smooth, consistent and reliable data transfer between your ESC and motor.
This product was added to our catalog on March 16, 2021
PTK-211, ProTek RC "iChecker 3.0" LCD LiPo Battery Cell Checker (2-8S)
This is the ProTek R/C "iChecker 3.0" LCD Battery Checker. The "iChecker 3.0" provides you with an affordable way to monitor the condition of your batteries and allows you to easily see the total voltage, capacity, individual cell voltage, lowest & highest cell voltage, as well as the voltage difference between cells on 2S to 8S Lithium batteries with a simple tap of the buttons.
The "iChecker 3.0" is also great for monitoring the total voltage of Nickel chemistry batteries from 4 to 8 cells, testing servo operation, and testing ESC operation! With an "iChecker 3.0" in your toolbox, you'll never have to question the condition of your batteries ever again.
Features:
Monitor total voltage, capacity, individual cell voltage, lowest & highest cell voltage, and voltage difference between Lithium cells
Monitor total voltage of NiCd or NiMH batteries
Lithium balance discharging
Servo tester
ESC tester
2-8S LiPo, LiFe or Li-Ion batteries
4-8-cell NiCd or NiMH batteries
2.1" LCD screen
NOTE: This unit is compatible with 2-8S JST-EH and JST-XH battery balance connectors. Batteries that use Thunder Power/Flight Power, or Polyquest type balance connectors will require a balance adapter board and cable.
This product was added to our catalog on December 16, 2021
PTK-2111, ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
The ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan is a great option to keep your ESC and motor temps in check. The fan features a machined aluminum case that helps to dissipate heat, allowing cooler operation of the fan motor at high voltage specs. Plus the aluminum frame work adds strength to the assembly, helping protect the fan blades in the event of a crash. The fan is a true 2S HV component, that has been built to last with dual ball bearings, and pre-wired 30mm long 2 pin JST connector. Plus, we include a 200mm long adapter plug that allows you to connect the fan directly to the receiver or another source of power. The fan can be mounted directly to the chassis with double side tape, or by using an optional fan mount (not included).NOTE: This fan should be installed at least 5mm away from the motor to allow sufficient air flow and prevent magnet interference. Features:
30mm aluminum cooling fan
Ideal for ESC and motor applications
Aluminum casing helps protect the fan blades
Compatible with 2S HV LiPo systems (8.75V max)
Anodized black with silver chamferred edges
Perfect for 1/12, 1/10 and 1/8 scale platforms
2 pin JST connector and included extension for easy installation
Product Model High Speed HV Cooling Fan
Application 1/12 - 1/8 Motor & ESC
Fan Speed 28,000 RPM
Dimensions (LxWxH) 31x31x10.5mm
Mounting Pattern
24x24mm
Material
Aluminum Case w/Plastic Fan
Weight
12.5g
Operation Voltage
5V - 8.75V
Connector 2 Pin JST
Current 0.45A
This product was added to our catalog on December 16, 2021
PTK-2112, ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Blue/Black)
The ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan is a great option to keep your ESC and motor temps in check. The fan features a machined aluminum case that helps to dissipate heat, allowing cooler operation of the fan motor at high voltage specs. Plus the aluminum frame work adds strength to the assembly, helping protect the fan blades in the event of a crash.
The fan is a true 2S HV component, that has been built to last with dual ball bearings, and pre-wired 30mm long 2 pin JST connector. Plus, we include a 200mm long adapter plug that allows you to connect the fan directly to the receiver or another source of power. The fan can be mounted directly to the chassis with double side tape, or by using an optional fan mount (not included).
NOTE: This fan should be installed at least 5mm away from the motor to allow sufficient air flow and prevent magnet interference.
Features:
30mm aluminum cooling fan
Ideal for ESC and motor applications
Aluminum casing helps protect the fan blades
Compatible with 2S HV LiPo systems (8.75V max)
Anodized black with blue chamfered edges
Perfect for 1/12, 1/10 and 1/8 scale platforms
2 pin JST connector and included extension for easy installation
Product Model
High Speed HV Cooling Fan
Application
1/12 - 1/8 Motor & ESC
Fan Speed
28,000 RPM
Dimensions (LxWxH)
31x31x10.5mm
Mounting Pattern
24x24mm
Material
Aluminum Case w/Plastic Fan
Weight
12.5g
Operation Voltage
5V - 8.75V
Connector
2 Pin JST
Current
0.45A
This product was added to our catalog on December 16, 2021
PTK-2114, ProTek RC 2 Pin JST Extension Lead to JR Servo Style Plug (200mm) (Male/Female)
The ProTek R/C 2 Pin JST Extension Lead to JR Servo Style Plug is a replacement for ProTek Aluminum Fans (PTK-2111 & PTK-2112). This can also be used to adapt any JST female connector to a 3-pin JR style connector for connection to a receiver or other applications. Package includes one 200mm long extension adapter cable.
This product was added to our catalog on March 2, 2022
PTK-2240, ProTek RC Clear Double Sided Servo Tape Roll (1x40")
ProTek R/C Clear Double Sided Tape is a 40" long roll of the 1" wide clear double side tape that has become a must have for RC use. This tape is 1mil thick and is perfect for securing receivers, ESC's or transponders to your RC car. The adhesive on the tape will keep your device securely fastened where you want it, yet the material remains easy to remove and leaves no residue behind. The waterproof, heat resistant properties help it stand up to the elements, and the soft, flexible material will conform to curved or uneven surfaces, and helps to reduce vibration to the component. Protek RC offers two types of double sided tape, clear and grey.
Features:
Perfect for cars, trucks, boats, helicopters, drones, rock crawlers and more!
Strong adhesion and durability
Water proof and heat resistant
Reduces vibration
Soft and flexible
Suitable for curved surfaces
Strong tensile strength
This product was added to our catalog on December 16, 2021
