PTK-7819, ProTek RC Aluminum Clamping Servo Horn (Blue) (25T-ProTek)
This is replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features a clamp type design that grips the servo’s output shaft so if the retainer screw comes loose, the horn will have a better chance of remaining in place, increasing your chances of finishing the race! Plus, the horn has a 3.5mm thick arm for durability, with 16.5mm and 20mm hole spacing threaded for 3mm hardware to suit the geometry and hardware requirements of most vehicles. Package includes one blue anodized servo horn, 3x10mm button head screw, 2x7.5mm clamp screw and a star lock washer.
Features:
Clamp design
16.5mm and 20mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
3.5mm thick arm
31mm Overall length
Linkage holes threaded for 3mm hardware
25T Spline ProTek Output Shaft
This product was added to our catalog on December 16, 2021
PTK-7823-BK, ProTek RC Aluminum Flat Clamping Servo Horn (Black) (25T-ProTek)
This is a replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features a clamp type design that grips the servo’s output shaft so if the retainer screw comes loose, the horn will have a better chance of remaining in place, increasing your chances of finishing the race! Plus, the horn has a 3.5mm thick arm for durability, with 16.5mm and 20mm hole spacing threaded for 3mm hardware to suit the geometry and hardware requirements of most vehicles. Package includes one black anodized servo horn, 3x10mm button head screw, 2x7.5mm clamp screw and a star lock washer.
Features:
Clamp design
16.5mm and 20mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
3.5mm thick arm
31mm Overall length
Linkage holes threaded for 3mm hardware
25T Spline ProTek Output Shaft
This product was added to our catalog on December 16, 2021
PTK-7824, ProTek RC Dual Offset Heavy Duty Clamping Servo Horn (Long) (25T)
The ProTek R/C Dual Offset Heavy Duty Clamping Servo Horn features a dual offset allowing you to choose the best offset for your setup. The 4mm thick horn has a 25mm and 20mm hole spacing threaded for 3mm hardware to suit the geometry and hardware requirements of most vehicles. Package includes one long servo horn, one 3x10mm button head screw and one 2x7.5mm clamp screw.Features:
Clamping design
25mm & 20mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
4.0mm thick arm
37.5mm Overall End to End length
Linkage holes threaded for 3mm hardware
25T Spline Futaba/Savox/ProTek Output Shaft
Unique Mounting Screw: PTK-H-1218
This product was added to our catalog on September 2, 2022
PTK-7825, ProTek RC Dual Offset Heavy Duty Clamping Servo Horn (Standard) (25T)
The ProTek R/C Dual Offset Heavy Duty Clamping Servo Horn features a dual offset allowing you to choose the best offset for your setup. The 4mm thick horn has a 20mm and 16mm hole spacing threaded for 3mm hardware to suit the geometry and hardware requirements of most vehicles. Package includes one standard length servo horn, one 3x10mm button head screw and one 2x7.5mm clamp screw.Features:
Clamp design
20mm & 16.0mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
4.0mm thick arm
33mm Overall End to End length
Linkage holes threaded for 3mm hardware
25T Spline Futaba/Savox/ProTek Output Shaft
Unique Mounting Screw: PTK-H-1218
This product was added to our catalog on September 2, 2022
PTK-8000, ProTek RC P-8 1/8 Buggy Super Hauler Bag (Plastic Inner Boxes)
This is the ProTek R/C P-8 1/8 Scale Buggy Super Hauler Bag. The P-8 Super Hauler Bag has evolved, and now features a variety of improvements that make the P-8 a durable, high quality, easier to use piece of luggage. These improvements include plastic interior framing and additional velcro surfaces that secure the shelves on the sides and rear, to prevent the shelves from sagging and causing the drawers to hang up when they are being pulled out or slid into position. Protective zipper tabs have been added to the front cover to help protect the zippers during transportation, and a solid velcro strip has been added to the entire length of the lower portion of the front cover to help keep the cover secured. When the cover is rolled up there are now five velcro tabs (instead of three), that will help to prevent the cover from coming loose when its rolled up. Finally, the graphic on the front features the ProTek R/C checkered flag graphic, with a ProTek R/C logo on the rear flap.
The ProTek R/C P-8 super hauler bag was designed from the ground up for 1/8th scale buggy racers. The bag has space on top under a covered flap for storing all your tools, a place on the back for your setup board and storage compartments on the side for storing your setup equipment or other tools.
Inside the bag has three layers of drawers, with four split draws on the bottom (two each side by side above each other) and one large drawer on the top. These are the newer style Hauler Bags that have plastic inner boxes. The large drawer on the top is large enough to hold a 1/8th scale buggy with wing and wheels attached!
In addition, it is also very easy to tow the bag around the track as it features a heavy duty retractable handle and smooth trolley wheels. Also included is a carrying strap that can be moved out of the way to access tools in the top compartment, or adjusted to provide easy carrying of the bag.Â
Specifications:
Overall Bag Dimensions (WxHxD):Â 21.65x23.22x13.77"
Large Drawer Dimensions (WxHxD):Â 19.5x7.5x12.5"
Medium Drawer Dimensions (WxHxD):Â 9.5x4.5x12.5"
Small Drawer Dimensions (WxHxD):Â 8.5x4.5x12.5"
*Dimensions may vary slightly due to manufacturers tolerances.
This product was added to our catalog on December 16, 2022
