PTK-7604, ProTek RC "SureStart" Pencil Style Glow Igniter (AA Battery)
This is the ProTek R/C "SureStart" Pencil Style Glow Ignitor. The SureStart pencil ignitor is a high quality glow ignitor that uses a AA size alkaline or rechargeable battery. This ignitor is great for surface and aircraft applications, due to its compact size and 2.25" reach. The blue anodized aluminum handle is easy to spot in your pit bag, and when properly maintained will withstand years of use.
This product was added to our catalog on March 16, 2021
PTK-7607, ProTek RC "SureStart 2" Rechargeable Glow Igniter (1.2V/5000mAh)
The ProTek R/C "SureStart 2" Rechargeable Glow Ignitor features a 5000mAh 1.2V sub-C NiMH battery to allow extended use with the safety and peace of mind that can only come from a NiMH battery. The SureStart 2 is a high quality glow ignitor that can be charged easily with most NiMH battery chargers. This ignitor is great for surface and aircraft applications, due to its compact size and 2.25" reach. Plus, there is a small "Property Of" space on the label can be used to prove ownership when your friends borrow it and forget to give it back. Use a sharpie to fill in your name, and cover it with clear vinyl or scotch tape to prevent the writing from getting worn off.
NOTE: For the best performance during a race day it is recommended that the ignitor be left on the charger when not in use.
This product was added to our catalog on December 16, 2021
PTK-7650, ProTek RC NiZn USB Battery Charger (4 Slots) (AA/AAA)
Introducing the ProTek RC Nickel-Zinc (NiZn) USB Battery Charger. This charger is designed for charging up to four AA or AAA NiZn batteries simultaneously. Specifically designed for NiZn batteries, it ensures proper charging and battery maintenance. NiZn batteries are known for their higher voltage compared to traditional NiMH batteries, so using a charger specifically for NiZn is important for safety and efficiency. This charger is equipped with red and green LED indicators for ease of use, letting you know in real time when your batteries are fully charged and ready for action. The USB design makes it convenient to plug into wall adapters, USB cubes, and even power banks which gives you the option for on-the-go charging.
Note: This charger is specifically designed for NiZn batteries and is not compatible with NiMH or NiCD type batteries. Please do not use this charger with any other type of battery except NiZn AA & AAA.
Features:
Charges up to four AA or AAA NiZn batteries simultaneously
USB connection allows flexibility in using various power sources
Specifically designed for NiZn batteries, ensuring safe and efficient charging
Red and green LED indicator lights for real time charging updates
Lightweight and portable design makes it easy to transport
Specifications:
Input Voltage: 5V
Output Voltage: 1.88V
Compatibility: AA/AAA (NiMH or NiCD)
Charging Indicator: LED (Red/Green)
Includes:
(1) NiZn USB Battery Charger
(1) USB Cable
Needed to Complete:
(1) USB Outlet Adapter or USB Power Bank
This product was added to our catalog on March 24, 2021
PTK-7800-BK, ProTek RC 4mm Aluminum Long Clamping Servo Horn (Black) (25T)
This is a ProTek R/C 4mm Aluminum Long Clamp Lock Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a clamp type design that grips the servo’s output shaft with enough force that even if the retainer screw comes loose, the horn will remain in place, increasing your chances of finishing the race! Additionally, the arm is 4mm thick for durability, has 19.75mm & 24.25mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles.
Features:
Clamp design
19.75mm & 24.25mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
4mm thick arm
35.5mm Overall length
Linkage holes threaded for 3mm hardware
25T Spline Futaba/Orion/Savox/ProTek Output Shaft
This product was added to our catalog on December 16, 2021
PTK-7805, ProTek RC Aluminum Servo Horn (25T-Futaba, Orion, Savox and ProTek)
This is a ProTek R/C Aluminum Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a 3mm thick arm for durability, has 19mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles.
Features:
19mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
3mm thick arm
27.25mm Overall length
Linkage holes threaded for 3mm hardware
25T Spline Futaba/Orion/Savox/ProTek Output Shaft
Note: Due to manufacturer tolerances, this servo horn may be a tight fit with certain servo brands.
This product was added to our catalog on December 16, 2021
PTK-7808, ProTek RC 4mm Aluminum Short Clamping Servo Horn (Blue) (25T)
This is a ProTek R/C 4mm Aluminum Short Clamp Lock Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a clamp type design that grips the servo’s output shaft with enough force that even if the retainer screw comes loose, the horn will remain in place, increasing your chances of finishing the race! Additionally, the arm is 4mm thick for durability, has 15mm and 19mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles.
This servo horn is an excellent upgrade for any Axial rig that uses the Axial AXI30836 servo horn, including the SCX10 II, RR10 Bomber, Wraith and Yeti vehicles. The horn is identical in size and specifications to the Axial AXI30836 servo horn, but the ProTek uses larger 2.5mm clamp screws, compared to the smaller 2mm clamp screws included with the Axial horn.
Features:
Same hole positions and overall dimensions as Axial AXI30836 servo horn! But ProTek uses larger 2.5mm clamp screws instead of the smaller 2mm clamp screws included with the Axial horn.
Clamp design
15mm and 19mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
4mm thick arm
30.5mm Overall length
Linkage holes threaded for 3mm hardware
25T Spline Futaba/Orion/Savox/ProTek Output Shaft
This product was added to our catalog on December 16, 2021
