PRO1010110, Pro-Line Pre-Mounted Sling Shot (Desperado) (2) (1/16 E-Revo) (Black) This is a pack of two Pro-Line Sling Shot Tires, Pre-Mounted on Black Desperado Wheels. The Sling Shot provides hours of fun in the sand, snow or even in the occasional mud pit. The 12 paddle design ensures maximum performance due to the true scoop design coupled with low roll outer sidewalls. Plus, Pro-Line makes using high performance, long lasting fun tires easier than ever by offering the Sling Shot tires pre-mounted to the Desperado wheels! The wheel features a wider offset, that will make your truck more stable and handle bumps and jumps like a champion. Pro-Line’s 6-spoke Desperado wheel will make your truck the toughest looking one on the block. The wheel is a one-piece wheel made out of extremely durable nylon material and features a molded in bead-loc ring for an awesome scale look. This is a 12mm hex wheel and it will make your truck stand out from the rest! Features: Ready to Sling Sand and Snow Scale 12-Paddle tread design for Awesome Looks and Performance Tires also available unmounted Lightweight 1-piece wheel Wide offset wheel that improves stability and performance Awesome scale look Wheel also available unmounted Made in the USA, since 1982  Specifications: Height: 3.85" (98mm) Width: 1.68" (43mm) Includes: (2) Sling Shot 2.2” Paddle Tires mounted on Desperado Wheels This product was added to our catalog on March 18, 2021

Read more less

PRO1015510, Pro-Line Trencher HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels Pro-Line Trencher HP Belted 3.8" Pre-Mounted Truck Tires feature a High-Performance herringbone weave pattern belt, molded  inside the relentless, tall and grippy tread of the Trencher HP tire. These are not your average belted tires! Made for All Terrain bashing, the Trencher HP 3.8" tires will not balloon or expand during use and will still provide the incredible grip that you expect from Pro-Line tires due to the soft M2 compound. Just like all Pro-Line's tires, they are proudly Made in the USA! Like the original Trencher X 3.8" tire, the next generation Trencher HP 3.8" is destined to become the ultimate, go-to Bash tire for your truck! Please note that the Trencher HP tires are not meant to be extreme speed run tires and have achieved up to 75 mph or about 3,500 RPM under ideal conditions in testing. Over revving your Trencher HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires. The Belted Trencher HP 3.8" tires come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (6345-00). The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere!  Features: Tires: Molded-in High-Performance Herringbone Weave Pattern Belt Trencher HP Tire Will Not Balloon or Expand at High Speed Horizontal H Shaped Tread for Ridiculous Amounts of Traction and Stability Over-sized Tall Tread is Second-to-none in Durability and Longevity Perfect for 3.8" Monster Trucks Extremely Detailed Sidewall Design for that Tough Off-Road Look Optimum Handling, Durability and Longevity Made in the Legendary M2 Compound Made in the USA, since 1982 - Read about Pro-Line Racing's History Wheels: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 6.70" (170mm) Width: 4.15" (105mm) Includes: (2) Pre-Mounted Trencher HP 3.8" Belted Tires on Raid Black 8x32 Removable Hex Wheels  (2) 8x32 to 17mm 1/2" Offset Hex Adapters  (16) M3 x 12mm long SHCS hardware  This product was added to our catalog on August 20, 2021

Read more less

PRO1016110, Pro-Line Street Fighter LP 2.8" Tires w/Raid Rear Wheels (2) (Black) (M2) w/12mm Removable Hex The Pro-Line Street Fighter Low Profile 2.8" Tires with Raid 6x30 Removable Hex Wheels take the guess work out of your glue job by doing the mounting for you so you can spend more time having fun! Looking for the ultimate street tire? Then check out Pro-Line's Street Fighter LP (Low Profile) 2.8” Tire perfect for your Rustler 2WD and 4WD, Stampede 2wd and 4x4 and the 2WD JATO. Based on the latest in high performance on-road tire technology, the Street Fighter LP 2.8" tire has the perfect balance of G force enhancement and style that will keep your truck turning heads! Street Fighter tires comes Pre-Mounted on a true next generation 2.8” wheel design from Pro-Line, the Raid 2.8” Removable Hex Wheel for all 2.8” tires! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! You can go from the included 12mm narrow offset (2wd Stampede®/Rustler® Rear) to the included 12mm wide offset hexes (2wd Stampede®/Rustler® Front and 4x4 Stampede®/Rustler® Front and Rear) quickly and easily. Also imagine being able to replace a damaged wheel hex without needing to replace your glued tires (6335-00 Replacement Hexes) or even upgrading your wheels to 17mm wheel hexes (6336-00 Sold Separately) for extreme use! These Raid 2.8” wheels accomplish all of this and more by using Pro-Line’s unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere! Features: Tire: Street Tread Perfect for your Rustler® 2wd or Rustler® 4x4 Grip and Rip on Asphalt and Concrete Aggressive Long Wear Street Tread Made in the USA, since 1982 - Read about Pro-Line Racing's History Wheel: Removable Hexes Allow you to Change Wheel Offsets on the Fly Easily Replace Damaged Hexes or Upgrade to 17mm hexes The 2 Most Common Offsets are Included Fits any of Pro-Line's 6x30 Removable Wheel Hexes Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Fits: Rustler 2wd Rustler 4x4 Stampede 2wd Stampede 4x4 JATO Rear Specifications:  Height: 4.07" (103mm)  Width: 2.05" (52mm)  Includes:  (2) Street Fighter LP 2.8” Tires (2) Foam Inserts This product was added to our catalog on May 7, 2021

Read more less

PRO1016810, Pro-Line Trencher HP Belted 2.8" Pre-Mounted Truck Tires (M2) (2) (Black) w/Raid Rear Wheels This is a pair of Pro-Line Trencher Belted 2.8" M2 Compound Tires, Pre-Mounted on Raid Rear Wheels. Pro-Line is proud to introduce the History making Trencher HP 2.8" BELTED All Terrain Truck Tires! Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the relentless, tall and grippy tread of the Trencher HP. These are not your average belted tires! Made for All Terrain bashing, the Trencher HP 2.8" tires will not balloon or expand during use and will still provide the incredible grip that you expect from Pro-Line tires due to the soft M2 compound. Just like all Pro-Line's tires, they are proudly Made in the USA! Just like the original Trencher 2.8" tire, the next generation Trencher HP 2.8" is destined to become the ultimate, go-to Bash tire for your truck! The Belted Trencher HP 2.8" tires come Pre-Mounted on the next generation 2.8" wheel design from Pro-Line, the Raid 2.8" Removable Hex Wheel! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! You can go from the included 12mm narrow offset (2wd Stampede®/Rustler® Rear) to the included 12mm wide offset hexes (2wd Stampede®/Rustler® Front and 4x4 Stampede®/Rustler® Front and Rear) quickly and easily. Also, imagine being able to replace a damaged wheel hex without needing to replace your glued tires (PRO6335-00 Replacement Hexes). You can even upgrade your wheels to 17mm wheel hexes (PRO6336-00 Sold Separately) or go for Aluminum hex adapters for extreme bashing fun! These Raid 2.8" wheels accomplish all of this and more by using Pro-Line's unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the Trencher HP 2.8" Belted tires now! PLEASE NOTE: The Trencher HP tires are not meant to be extreme speed run tires and have achieved up to 75 mph or about 5,000 RPM under ideal conditions in testing. Over revving your Trencher HP tires could result in breaking the internal belt, which will NOT be covered under manufacturer warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free spinning tire or tires. Features: Tires:     Molded-in High-Performance Herringbone Weave Pattern Belt Trencher HP Tire Will Not Balloon or Expand at High Speed Horizontal H Shaped Tread for Ridiculous Amounts of Traction and Stability Over-sized Tall Tread is Second-to-none in Durability and Longevity Perfect for 2.8" Monster Trucks Extremely Detailed Sidewall Design for that Tough Off-Road Look Optimum Handling, Durability and Longevity Made in the Legendary M2 Compound Made in the USA, since 1982 - Read about Pro-Line Racing's History Wheels: Removable Hexes Allow you to Change Wheel Offsets on the Fly Easily Replace Damaged Hexes or Upgrade to 17mm hexes The 2 Most Common 12mm Offsets are Included Fits any of Pro-Line's 6x30 Removable Wheel Hexes Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 4.87" (123.7mm)      Width: 2.86" (72.64mm) What's Included: (2) Pre-mounted Trencher HP 2.8" Belted Tires on Raid Black 6x30 Removable Hex Wheels (2 of each) 6x30 to 12mm Hex Adapters (Narrow & Wide) (12) M3 x 12mm long SHCS hardware Fits: Stampede 2wd Stampede 4x4 Rustler 2wd Rustler 4x4 JATO Rear This product was added to our catalog on May 7, 2021

Read more less

PRO10170203, Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3) Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires feature a High-Performance herringbone weave pattern Belt molded inside the tire. These belted slick Drag Racing tires were specifically made for no-prep Drag racing and will not balloon or expand during use, giving you more control when you are putting down the power! The Reaction HP SC tires provide the incredible grip that you expect from Pro-Line but will also provide unmatched stability. Just like all of Pro-Line's tires, they are proudly Made in the USA! NOTE: Reaction HP tires have a maximum speed rating that, if exceeded, could result in permanent damage to the internal belt. For the Reaction HP SC tires that is 90 mph or about 7,000 RPM. Over revving your Reaction HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires. Features: Molded-in High-Performance Herringbone Weave Pattern Belt Reaction HP Tire Will Not Balloon or Expand During Use Specifically Made for No-prep Drag Racing Available in Soft S3 and the Super Soft Ultra Blue compound to provide incredible grip Belted Slicks Give You Control to Put the Power Down Soft Foam Inserts Included For use with Pro-Line 2.2"/3.0" Wheels like the Pomona Drag Specific Wheel Made in the USA, since 1982 Specifications: Height: 4.15" (105mm) Width: 1.80" (46mm) Includes: (2) Reaction HP SC 2.2"/3.0" Drag Racing BELTED Tires  (2) Soft Foam Inserts  This product was added to our catalog on November 21, 2021

Read more less

PRO1019810, Pro-Line Badlands MX57 5.7" Pre-Mounted 1/6 Monster Truck Tires (Black) (2) (Z3) w/Raid Wheels Pro-Line Badlands MX57 5.7" Pre-Mounted 1/6 Monster Truck Tires with Raid Wheels. These Badlands are based on the MX43 tire and features the same aggressive tread combination. Now mounted on the Raid wheels, these tire and wheels weigh 20% less than prior models. Pro-Line Badlands tires are known for having a sweet Motocross inspired tread and the Badlands MX57 tires kick that up a notch with a Bigger and Bolder knobby tread that matches modern MX tire design.The Raid 5.7" wheels use a 24mm hex with the standard 1/5 scale through hole to fit most 1/5 scale vehicles like the Arrma Kraton 8S and includes machined aluminum wheel washers to fit onto the Traxxas X-Maxx platform. Inspired by popular full-size off-road wheels, the Raid 5.7" wheel is extremely tough and lightweight. Features: Tires: Incredible Traction on Any Surface Ultra-Durable and Anti-Ballooning Tire Compound Aggressive Motocross-Inspired Appearance Nearly 20% Lighter than the Previous Version Foam Inserts Included Made in the USA, since 1982 Wheels: 24mm Hex with Standard 1/5 Scale Through Hole to Fit Most Large-Scale Vehicles Machined Aluminum Wheel Washers Included to Fit the X-MAXX® Platform Extremely Tough with Bold Style to Match Blacked-out Raid Wheel Styling Specifications: Scale: 1/6 Package Type:Pre-Mounted Wheel Width:5.7" Inner Diameter: 5.7" Width: 3.72" (94 mm) Height: 8.35" (212 mm) Weight: 682 grams (1.5lbs) Tire Compound:Medium Vehicle Type:Monster Truck Tire Type:All-Terrain Tire Tread:Badlands MX57 Wheel Position:Front/Rear Wheel Type:Raid Wheel Hex Size: 24mm Includes: (2) Pre-Mounted Badlands MX57 All Terrain Tires (2) Aluminum hub adapters This product was added to our catalog on March 31, 2021

Read more less

PRO1020011, Pro-Line 1/7 Toyo Proxes R888R S3 "Arrma Felony" Rear 53/107 2.9" BELTED MTD 17mm Spectre (2) (2) Pre-mounted Toyo Proxes R888R Tires on Spectre Gunmetal 17mm Wheels Licensed Toyo Proxes R888R Scale Replica of the High-performance Track Tire Maximum Street and Speed-Run Performance GT3-Inspired 10-spoke Wheel Design Satin Gunmetal finish This product was added to our catalog on January 20, 2024

Read more less

PRO117810, Pro-Line Badlands 3.8" Pre-Mounted Truck Tires (2) (Black) w/Raid Wheels (M2) The Badlands 3.8" tires now come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires. These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (PRO6345-00). The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere. Arrma Kraton 6S BLX HPI Savage Flux HP HPI Savage X HPI Savage XL Team Associated MGT Traxxas Revo Nitro Traxxas Summit 1/10 Traxxas T-Maxx Features: Tire: Readers' Choice Award Winning Tread Design Aggressive Tire Design Tire Based on Motocross Tread Technology Large Tire Lugs for the Ultimate in Tire Durability Made in the USA, since 1982 Wheel: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 5.85" (149mm) Width: 2.72" (69mm) Includes: (2) Pre-Mounted Badlands 3.8" Tires on Raid Black 8x32 Removable Hex Wheels (2) 8x32 to 17mm 1/2" Offset Hex Adapters (16) M3 x 12mm long SHCS hardware This product was added to our catalog on August 14, 2021

Read more less

PRO119210, Pro-Line Masher 2.8" Pre-Mounted w/Raid Electric Rear Wheels (2) (Black) (M2) w/Removable Hex This is a set of two Pro-Line Masher 2.8 Tires Pre-Mounted on Raid Electric Rear Wheels. These pre-mounts are intended for use on the rear of the Traxxas electric Stampede and Rustler trucks. Pro-Line takes the guess work out of your glue job by doing the mounting for you so you can spend your time having fun! The Mashers ultra-modern Chevron Style tread digs deep into the roughest and toughest terrain and looks mean doing it. The side tread of this behemoth tire features a hook shape that craters the dirt and achieves unparalleled side traction. After fitting your truck with this massive Masher tread you'll be ready for back yard thrashing and mashing on any neighborhood terrain. The Masher 2.8” tire is perfect for the Traxxas Stampede 2WD and 4WD (Front and Rear) and Traxxas Rustler 2WD and 4WD (Front and Rear) and the JATO Rear. Impress your friends – Get a set of Pre-Mounted Mashers today!  Imagine being able to replace a damaged wheel hex without needing to replace your glued tires (PRO6335-00 Replacement Hexes) or even upgrading your wheels to 17mm wheel hexes (PRO6336-00 Sold Separately) for extreme use! These new Raid 2.8” wheels accomplish all of this and more by using Pro-Line’s unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere! The Raid wheels feature a detailed 10-spoke design that recreates the latest in high performance full size forged racing wheels with the strength and durability to match the bold look. Molded-in bead-loc detail only adds to the realism. These wheels are proudly Made by Us in the USA and are destined to change the wheel game forever! Get your new Badlands MX28 2.8” Tires on Raid Removable Hex Wheels today! Tire Features:  Ultra-Traction Chevron type Tread Adds Tough and Aggressive Monster Truck Styling to your Truck Designed to Tackle any Terrain Spend Less Time Gluing and More Time Having Fun Made in the USA, since 1982 Wheel Features:  Removable Hexes Allow you to Change Wheel Offsets on the Fly Easily Replace Damaged Hexes or Upgrade to 17mm hexes The 2 Most Common Offsets are Included Fits any of Pro-Line’s 6x30 Removable Wheel Hexes Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications:  Height: 4.90" (124mm)  Width: 2.78" (71mm)   This product was added to our catalog on May 22, 2021

Read more less

PRO603100, Pro-Line Pro-Bond CA Tire Glue (0.7oz) This is a 0.7 ounce bottle of Pro-Line Pro-Bond CA Tire Glue. Pro-Line’s Pro-Bond Tire Glue has a hold strength of 3,200 PSI (Test Method: Steel on Steel in Tensile Shear) which is the highest strength of any tire glue available. Pro-Line’s unique glue formula also provides the fastest drying glue possible while drying crystal clear with no yellowing or whitening found when gluing tires with other glues. The Pro-Line development team did not just stop with improving the glue. Pro-Line Engineers began the design process with the clear goal of revolutionizing the glue delivery system (bottle and applicator tip).The Pro-Line Pro-Bond Tire Glue features a super soft and squeezable round bottle that improves feel as you apply the glue, with the added benefit of the round bottle being significantly more stable on your pit table when compared to the elliptical shape found in all other glue bottles. The single biggest advancement of the Pro-Bond Tire Glue system is the translucent yellow Pro-Bond applicator tips. The tips are specifically intended around Pro-Line’s exclusive round bottle design and snap into place for a secure fit while gluing. The Pro-Bond applicator tips are re-usable unlike the throw-away tubes and have the perfect size applicator hole for gluing tires. Features: Custom Glue Formula Specifically Designed for Maximum Bond with Tires Super-Fast and Crystal Clear Drying Maximum Strength Bond – 3,200 PSI Holding Strength Unique Super Soft Round Bottle for Optimum Feel and Stability Re-Usable Snap Fit Yellow Pro-Bond Applicator Tips Includes: (1) Pro-Bond Tire Glue (0.7oz/20g) (2) Pro-Bond Yellow Applicator Tips This product was added to our catalog on April 18, 2023

Read more less