ASC21563, Team Associated Factory Team Reflex 14B/14T Metal Drive Gear Set
This is an optional Team Associated Factory Team Reflex 14B/14T Metal Drive Gear Set, intended for use with the Reflex 14B 1/14 electric buggy kit.
Includes:
(1) Metal ring gear
(1) Metal pinion gear
This product was added to our catalog on January 29, 2021
Whether you race indoor or outdoor, protecting your chassis from premature wear will improve its lifespan and help maintain performance. These Factory Team pre-cut chassis sheets are made from adhesive-backed 18-mil vinyl and offer a protective surface while looking trick with intricate details for that Factory Driver look.This part fits the following vehicles:RC10SC6.4
ASC7662, Team Associated 32P Spur Gear (81T)
Team Associated 32 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed.
This product was added to our catalog on OCTOBER 5, 2023
ASC91466, Team Associated Diff & Idler Gear Set
Team Associated Diff & Idler Gear Set. Package includes replacement gear diff case, and idler gear.
This product was added to our catalog on April 26, 2021
ASC9653, Team Associated 48P Spur Gear (81T)
Team Associated 48 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed.
This product was added to our catalog on January 29, 2022
ASC9654, Team Associated 48P Spur Gear (87T)
Team Associated 48 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed.
This product was added to our catalog on January 29, 2021
HPS-CT700– S.Bus2 High-Voltage Low-Profile Surface Servo
High Performance Servo with Brushless Motor (01102321-3)
FEATURES:– Suitable for RC cars 1/10 scale on/off road and drifting.– Programmable/HV Brushless Servo.– Custom New high power Brushless Motor.– Supports SR mode with T7PX.– Programmable and compatible with S.Bus and S.Bus2 systems.– Can be connected to a PC using the CIU-2/-3 USB adapter sold separately.– Upper/middle/bottom: Aluminum Case
Speed：0.07sec/60°(7.4V) ／ 0.08sec/60°(6.0V)
Torque：30.0kgf・cm(7.4V) ／ 23.0kgf・cm(6.0V)
Dimensions/Weight：40.5×21.0×26.2mm/54g
RATED VOLTAGE:DC 6.0V-7.4V
OPERATING VOLTAGE:DC 4.8-8.4V
ONLY FOR RC CARS SMALLER THAN 1/5 SCALE
HRADRL30VM01, Vertical Shock Mounts with Standoff: Losi Drag Car
The Hot Racing Losi 22S Drag Vertical Shock Mounts are a tuning option that alters the shock geometry, placing the shocks in a more vertical position to improve rear weight transfer at launch. Package includes one vertical shock mount, two standoffs and hardware.
Features:
CNC machined aluminum Vertical Shock Mounts anodized black
Three shock mounting locations expands suspension tuning options
Stronger and more rigid than stock shock mount
Stainless Shock stand offs
This product was added to our catalog on September 27, 2021
HRATE48G01, Aluminum/Carbon Fiber Steering Bellcranks & Draglink, for Traxxas Bandit & 2wd Slash
The Hot Racing Traxxas Slash Aluminum Steering Bellcranks & Draglink Set is an aluminum steering rack upgrade for the Traxxas Bandit, Rustler, 2WD Slash, and similar vehicles
Features:CNC machined 6061 aluminum bellcranks, anodized black with chamfered edges2.5mm carbon fiber draglink with brass bushingsBall bearings for smooth and consistent bellcrank performanceReplaces Traxxas plastic 3743 steering bellcranks and draglinkIncludes:(1) right aluminum bellcrank(1) left aluminum bellcrank(1) carbon fiber draglink(4) 5x8x2.5mm ball bearings(2) brass bushings(2) M3x8mm button head cap screws
This item was added to our catalog March 3, 2022
JCO0365, 1955 Chevy Bel Air Street Eliminator Drag Racing Body (Clear)
The JConcepts 1955 Chevy Bel Air Street Eliminator Drag Racing Body is a no prep replica of one of the most popular cars in the door slammer racing since. Taking on this project was not an effortless task, doing a great deal of R&D, the team went for the more race inspired style and decided to split up the design into 3 different parts. First, the main Bel Air shell has been carefully crafted via CAD and hand shaped and finish to realize the many details found on the 1955. The stunning looks, slightly modified for drag racing, create a low-profile build, racy, laid-back front grille and unmistakable front headlight section.
JConcepts has designed the entire race body with the shoebox look as it was called in the 50’s. Along with the flatter straighter panels, the '55 also has modern cues like wrap-around glass on the windshield, and tail lights that jut outward. The body shell has built-in trim along the main panels which can be painted and detailed by the user to emulate the real steel. In the rear, the drop-dome roof glides toward the trunk deck which allows the 2-piece spoiler package to drop into place.
Sculpted and abbreviated (race-style) bumpers are molded with the body and just like all the rest, can be painted as desired. The front hood-scoop is a separate polycarbonate piece which has a special form just to under-cut and look the size and shape as a 1:1 counterpart. Slight fender flares give the user a hint of trimming direction for the 13” wheelbase and wheel well openings. The trim lines throughout the body provide a low-profile appearance and steady guide for a clean overall look.
Included in each body set, a 1955 Chevy Bel Air decal sheet, rear wing option including lower support and upper wing spoiler and the paint mask for all windows. A front hood-scoop is also part of each body set and ready for trim, fit and finishing. As always, each body set is backed with JConcepts customer support and racing heritage.
The Chevy Bel Air measures a 13.00" wheelbase and the inside dimensions of the body are 11.25" wide front and 12.00" rear. The body is built for a 2wd SCT wheelbase length and narrowed to more resemble the original 1:1 counterpart. It's helpful to plan your build, take measurements and modify your platform to fit inside the boundaries of the Chevy body.
NOTE:
The rear wing consists of two pieces, the lower section is designed with an L-shape with support ribs which require double-sided tape (not included) to attach to the back of the trunk lid. Once base is attached, apply more double-sided tape to match locations on the top wing and drop the main wing down into place. The hood-scoop is also applied with double-sided tape and it can be applied by installing 1 small strip of tape on both sides of the scoop. To finish, flex the scoop out and drop down and press firmly against tape. Photos show body mounted on Team Associated DR10.
Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Features:
1955 Chevy Bel Air drag racer faithful representation
Two-piece rear wing for street elimination competition
Fits an assortment of SCT length trucks with width modifications
Decal sheet with Chevy, Bel Air and JConcepts badges
Officially licensed by Chevrolet to JConcepts
RC Speed Secrets "Next Level" Hybrid Ceramic Wheel & Gearbox Bearing Set (Stainless) for Traxxas Drag Slash- Chevrolet C10 with Magnum 272R Pro Series transmission
This product was added to our catalog on October 9, 2021
ALL in 1 Dirt Defending Super Lube/Cleaner.
Features:
It cleans while it lubes. We've added our proprietary cleaning agent that agitates dirt inside the bearing when applied and ejects dirt while in motion. Centrifugal force.
The more it turns the more it cleans and ejects contaminants versus most rc lubricants that only attract contaminants being topical versus a penetrant.
Like alcohol it evaporates. Therefore not attracting dirt/dust into a wet bearing thus requiring a lot less maintenance and better performance/durability over time.
It penetrates. Rather than living on top, our formula actually penetrates metals and creates a non-stick surface while conditioning the metal itself.
Repels water. (when you combine with our RCSS STAINLESS Hybrid Ceramic Bearing kits and our Super-Lube's water resistance principles, you can be confident that your bearings will not rust from non-operation, mister systems, or over watered tracks. Stainless does not rust or corrode and our lube repels water.
VERY user friendly applicator. Includes a Fine tip 45 degree bent tip for laser sharp accuracy.
Travel Cap. We include a convenient travel cap to use when stored or traveling.
Results are a cleaner, faster, more consistent, more durable longer lasting bearing
It's an Anti-seize as well
Viscosity thinner than water to easily reach behind your bearing seals/shields
Use it on anything needing lubrication even around the house in place of WD40 type products. You'll be amazed.
Includes:
Qty (1) Bottle of RCSS Bearing Lube-Cleaner
Qty (1) Applicator with Fine 45 degree bent tip for precise laser sharp accuracy.
QTY (1) Travel cap
Notes:
Due to the evaporative nature of our Super-Lube the travel cap must be used when stored. Use the resealable bag provided to keep all components neatly stored.
Our lube helps to minimize maintenance, not eliminate it entirely.
For best bearing performance, use lube on all reachable bearings every track day before you run, We recommend removing and cleaning all bearings with a citrus based degreaser once every 6-8 weeks depending on how much you run.
This product was added to our catalog on October 9, 2021
AE DR10 Drag Car Gearbox Ceramic Bearing kit for AE DR10 Drag Car Wheel and Gearbox
Includes: 14 high-performance, precision, Next Level Hybrid Stainless Ceramic Bearings
Features:
Our AE DR10 Drag Car hybrid ceramic bearing sets are 21% lighter than popular ceramics currently in the market.
Our Stainless vs Current Chrome/Steel materials- Stainless doesn't rust and is stronger and much more durable than Chrome/steel
The presence of a minimum of 10.5 % chromium in our stainless steel gives it the property of corrosion resistance
Faster more efficient acceleration
Significantly reduce natural drive-train drag due to increased quality & efficiency of our hybrid ceramic bearing components
Cooler operating temps.
Reduced rotating mass
Increase drive train roll
Endless customer testimonials using them for 1 year + when using our lube regularly
Not only the fastest ceramics on the market but also the most durable
This product was added to our catalog on October 9, 2021
Team FastEddy Arrma Mojave 6S BLX Bearing Kit. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(10) 8x16x5
(2) 8x19x6
(4) 15x21x4
(2) 5x11x4
(4) 6x10x3
NOTE:
Photo of unpackaged bearings shows random bearings and is not representative of what you will receive.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. FastEddy does their best to keep the kits updated. If you find a variation or mistake in this kit, please contact us.
This product was added to our catalog on March 6, 2024
Pro-Line PRO-Series 32P Transmission (6350-00) Ceramic Sealed Bearing Kit
(4) 5x11x4 Ceramic
(2) 10x16x5 Ceramic
Item # 6350-00
You are purchasing the bearings listed above.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. We try to keep the kits updated as best as we can. If you find a variation or mistake in our kits, please contact us so we can look into it.
TFE7141, FastEddy Traxxas Drag Slash Ceramic Bearing Kit
Team FastEddy Traxxas Drag Slash Ceramic Bearing Kit. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(4) 5x8x2.5 Ceramic Bearings
(13) 5x11x4 Ceramic Bearings
(2) 10x15x4 Ceramic Bearings
NOTE:
Photo of unpackaged bearings shows random bearings and is not representative of what you will receive.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. FastEddy does their best to keep the kits updated.
This product was added to our catalog on October 18, 2023
TRI6004, Mega Roll Double-Sided Clear Servo Tape, 1.5" x 16"
Ideal for all your electronic placement needs, servos, receivers, speed controllers, gyros, transponders and even strong enough to hold your battery pack in your 1/10 buggy or touring car.
Features:
Thinner than Standard Double Sided Tape
Super Sticky
Assists in reducing vibration and noise effects on electronics
Very good joint filling properties
Durable & weather resistant
Good adhesion in cold & heat
Specifications:
Size: .5mm x 1.5" x 16'
Tire tweak is the most popular tire conditioner for both R/C and slot car foam tires. Rub into tires the night before a race and let air dry. If damp the next morning, wipe off with dry rag before venturing out on the track. Tire tweak doesn't soften your tires, but it restores the natural chemical grip of the tire. Increased traction without accelerating tire wear. Quicker lap times because of greater cornering speed without bogging on the straightaways.
Features:
4oz. dauber top bottle
Increases chemical grip of the tire by putting natural oils back into the tire
Works on Rubber and Foam Tires
Odorless, No strong chemical smell
TRITEP5000, Sticky Fingers Odorless Tire Traction, for Foam and Rubber Tires
Sticky Fingers is an odorless tire traction for foam and rubber tires. Cleans and rejuvenates tires with out changing the durometer of the rubber (softening). Sticky fingers is the only legal traction formula at a lot of venues because it contains no wintergreen or potent chemical smell.
Features:
4 ounce bottle
Easy to use dauber top
Odorless
TRITEP5005, Road Rage On-Road Tire Traction, for Rubber and Foam
Road Rage is the best rubber and foam tire conditioner and traction formula you will find for on-road asphalt racing. Also an excellent conditioner for foam tires on carpet and slot racing tires
Features:
4oz. Dauber top bottle
Medium odor
Softens rubber and increases grip
TRITEP5008, Blue Grovie Tire Traction, for Off-Road Clay
Blue Groovie is the best rubber and foam tire conditioner and traction formula you will find for off-road rubber tires on clay and clay blue grooved tracks.
Features:
4oz. Dauber top bottle
Light odor
Softens rubber and increases grip
