CSE010-0176-00, Castle Creations Sidewinder Nano Micro Brushless/Brushed ESC (12.6V)
Castle Creations Sidewinder Nano Micro Brushless/Brushed ESC (12.6V). A performance upgrade solution to the ever-growing micro-scale scene in R/C! Capable of running on 2-3S (7.4 - 11.1 Volts) LiPo batteries, this Sidewinder Nano is intended for 1/24 and 1/18 scale RTR (Ready-To-Run) and kit platforms to provide precise throttle control, supreme power-punch, tuneable parameters and unmatched durability and reliability!
The Sidewinder Nano comes equipped with Castle Creations proprietary CRYO-DRIVE Technology resulting in improved thermal performance during partial throttle operation where the majority of driving occurs, resulting in extremely efficient output and reducing stress on the ESC. In addition, the Sidewinder Nano can also be “tuned” for the drivers’ preferences using a Windows based PC and a Castle Link USB adapter (CSE011-0119-00 - sold separately), or with a mobile device using a Castle B-Link Adapter (CSE011-0135-00 - sold separately), allowing tuning and switching parameters to conveniently be done on the fly!
Ideal for:
1/24 2WD or 4WD vehicles up to 1lbs
1/24 and 1/18 crawlers up 2.25lbs (No rock racing/Hill climbing)
Features:
Perfect fit and upgrade for most 1/24 and 1/18 micro platforms
Selectable brushless or brushed
CRYO-DRIVE technology
Castle B-Link adapter compatible
Tune-able parameters
Extremely lightweight and compact
Specifications:
Application: 1/24 and 1/18 scale 2WD or 4WD
Type: Sensorless Brushless/Brushed
Input Voltage: 2-3S (7.4-11.1V) LiPo
Continuous Current: -
Burst Current: -
BEC Voltage: 5A Peak
Input Lead: -
Motor Leads: -
Programmable: Yes
Includes:
(1) Castle Creations Sidewinder Nano Micro ESC
This product was added to our catalog on September 9/2024
FSY-FS-RM005, Flysky RM005 Mini-Z FHSS Transmitter Module
Module Overview:
FlySky RM005 Module. This optional module is designed for the Noble NB4 Transmitter. Using this will allow you to control the Mini-Z EVO receiver with the Noble NB4 transmitter. This module is ideal for racing or drivers seeking to get rid of any latency found in the stock setup.
Features:
allows seamless integration with Mini-Z chassis
Decreases latency over the stock transmitter
Utilizes the FHSS protocol
Specifications:
Input Voltage: 3.3V
Frequency: 2.4GHz
Channels: 4Ch
Protocol: FHSS (Mini-Z)
Antenna: Single
Dimensions: 0.66x1.1x0.6in (34x18x5.2mm)
Weight: 0.08oz (2.3g)
Includes:
(1) RM005 Mini-Z FHSS Transmitter Module
This product was added to our catalog on November 25, 2024
FUTUBT2333, Futaba 10PX 2.4GHz Transmitter Module Adapter (Mini-Z)
Module Adapter Overview:
This is the Futaba 10PX Mini-Z Module Adapter, designed for use with the Futaba 10PX transmitter. With this adapter, you can seamlessly integrate the mini-z module (FS-RM005), expanding the versatility of your 10PX transmitter.
Features:
Mini-Z Compatibility
Plug-N-Play with Mini-Z Module (FS-RM005)
Includes:
(1) Futaba 10PX Mini-Z Module Adapter
Needed to Complete:
Futaba 10PX Transmitter
Mini-Z module (FS-RM005)
This product was added to our catalog on December 9, 2024
KYO32342Y, Kyosho MR-03 Mini-Z RWD ReadySet w/Corvette C8.R Body (Yellow) w/KT-531P 2.4GHz Radio
Features
Includes the redesigned Syncro KT-531P transmitter with multiple setting options.
Updated circuit board with newly developed control program dramatically improves steering feel.
Highly detailed display-standard body is fully factory finished.
Full ball bearing specifications include 7 bearings, previously an optional upgrade.
Compatible with all MINI-Z Racer body styles. **Motor case and diff gear assembly to suit body are required to be purchased separately.
Front suspension incorporates VCS that optimizes camber angle with suspension stroke.
Specifications:
Length: 173mm
Width: 78mm
Wheelbase: 98mm (LL)
Weight: 169g
Chassis: RWD (MR-03)
Front Wheel Offset: Narrow +3.0mm (for RWD)
Rear Wheel Offset: Wide +3.0mm (for RWD)
R/C System: Syncro KT-531P
Includes:
Factory assembled chassis
Pre-painted plastic body, complete with markings
KT-531P 2.4GHz transmitter
Front tread adjustment parts set
Pinion gears 6T, 7T, 8T, 9T and tool
Spare wheel nuts and wrench
Needed To Complete:
(4) AAA Batteries for transmitter
(4) AAA Batteries for chassis
This product was added to our catalog on September 17, 2024
KYO32353AG, Kyosho MR-03 RWD Mini-Z ReadySet w/Sauber Mercedes Group C Rennsportwagen C9 Body (Black) w/KT-531P 2.4GHz Radio
Needed To Complete:
(4) AAA Batteries for transmitter
(4) AAA Batteries for chassis
This product was added to our catalog on September 17, 2024
KYO32353S, Kyosho MR-03 RWD Mini-Z ReadySet w/Sauber Mercedes Group C Rennsportwagen C9 Body (Silver) w/KT-531P 2.4GHz Radio
Needed To Complete:
(4) AAA Batteries for transmitter
(4) AAA Batteries for chassis
This product was added to our catalog on September 17, 2024
KYO32354L, Kyosho MR-03 Mini-Z ReadySet w/Toyota GT-One Body (Red)
This is the Kyosho MR-03 RWD Mini-Z ReadySet with Toyota GT-One No. 3 Body. Kyosho's MINI-Z Racer Sports MR-03 first launched in 2013, and Kyosho has since revitalized the concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD series!
About the Mini-Z MR-03 RWD
Chassis & Body
This set includes a Toyota GT-One No. 3 car body finished to display model standards that match stunning style with the same performance, reliability, and durability of the MR-03 chassis.** The body and chassis work hand in hand to offering fun anytime and anywhere. The control program on the circuit board offers linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (KYOMZW446).
Electronics
Powered by a brushed motor, this MR-03 is designed to deliver smooth power and fun speeds. The main electronics board supplies power to the motor, as well as the servo. Four AAA batteries are all that is required to power the chassis making it easy to get started right out of the box.
Transmitter
The 2.4GHz KT-531P features steering and throttle trim as well as dual rate adjustment of steering angle and control for the flashing speed of optional LEDs.*** In addition, the transmitter has a Training Mode feature which limits speed of the car for easy learning (default setting at the time of shipment is Training Mode).
Needed To Complete:
(4) AAA Batteries for transmitter
(4) AAA Batteries for chassis
This product was added to our catalog on September 17, 2024
KYO32521Y, Kyosho MX-01 Mini-Z 4X4 Readyset w/Jeep Wrangler Body (Yellow) & 2.4GHz Radio
Kyosho MX-01 Mini-Z 4X4 Readyset with Jeep Wrangler Rubicon Body!
The Kyosho MX-01 Mini-Z 4X4 Readyset with Jeep Wrangler Rubicon Body takes the MX-01 series to an even greater level of mini-class detail! With black over-fenders, front grille with dark grey accent, and the distinctive Jeep round headlights, the formidable styling of the black hard top is immaculately reproduced in a model that rests in the palm of your hand.
The MX-01 series is built with the attention to scale detail and quality design expected of Kyosho, and a design that allows MINI-Z fans to expand their horizons with climbing and crawling capabilities. This scale 4x4 beauty features a fine-tuned overall design, superior driving performance and high-quality injection-molded scale body and details.
Mini Z Molded Body Details
Injection molded bodies enhanced with accessory parts recreate a level of detail in the MINI-Z 4x4 series that surpasses all MINI-Z bodies that have come before.
Chassis and Geometry DetailsThe same ladder frame and multi-link rigid-axle suspension commonly used in popular 1:10-scale off-road models is condensed into Mini-Z size for the most articulation and performance available in any mini RC truck.
Specifications:
Scale: 1/24
Length: 197.3mm
Width: 87.3mm
Height: 89.1mm
Chassis Type: MX-01
Wheel Base: 120.0mm
Tread: F/R:72.7mm
Weight: 234g (excl. battery)
Motor/Engine: 130 Class
Gear Ratio: 55.44/1, 34.65/1, 46.20/1, 30.80/1, 39.60/1, 27.72/1
Front Tire Diameter: 42.0mm
Rear Tire Diameter: 42.0mm
Front Tire Width: 14.3mm
Rear Tire Width: 14.3mm
Battery: 4 x AAA alkaline
Transmitter: Syncro KT-531P
Speed: Approx. 3.3km/h/6.6km/h (Pinion gears 10T/20T)
Running Time: Approx. 60 mins
Includes:
Complete chassis with built-in electronics
Factory-painted body complete with many fine details
KT-531P 2.4GHz transmitter
Pinion gear set 10T, 12T, 14T, 16T, 18T, 20T
3 types of motor spacers
Pairing stick
Needed to Complete:
(4) AAA batteries for the transmitter
(4) AAA batteries for chassis Alkaline or NiMH
This product was added to our catalog on September 17, 2024
KYO32621MG, Kyosho MA-020 AWD Mini-Z ReadySet w/Dodge Challenger SRT Hellcat (Sublime) w/KT-531P 2.4GHz Radio
The Kyosho MA-020 Mini-Z AWD ReadySet chassis features VCS (variable camber suspension) on the front that optimizes camber change with suspension stroke and a specially designed circuit board. The chassis design allows space for installing the optional MZW431 gyro unit (not included). The gyro can be adjusted by turning a small volume adjuster on the chassis to reflect the amount of steering correction in response to changes in chassis posture, allowing beginners through to experts to drive to their full potential. Fully kitted out with precision ball bearings, the high drive efficiency of the MA-020 chassis is complimented in the Readyset by the unique scale body and 2.4GHz Syncro KT-531P R/C system that requires no frequency band setting; all at a great value price. Simply install the batteries to enjoy the thrill of drift driving with the included set of drift tires. The chassis is compatible with nearly all ASC MINI-Z bodies (additional parts may be required for some body styles). The MINI-Z AWD promises a unique world of dramatic racing action for you to experience and enjoy.
Features:
MINI-Z AWD Readyset based on MA-020 chassis.
Special circuit board updated with optimized steering control program.
Chassis features gyro sensitivity adjustment function.
Drift tires are installed as standard.
Readyset requires only batteries to be ready for action!
Features 2.4GHz Syncro KT-531P transmitter that requires no setup of frequency bands.
Factory completed body comes with display model quality finish.
Features VCS (variable camber suspension) that adjusts camber in accordance with suspension stroke.
Coil spring on front suspension can be easily replaced without tools.
Wide range of optional parts is available to be installed.
Note: Optional ICS can NOT be used. Also, this model is specially designed for the KT-531P transmitter. It is not compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is only compatible with the special (No.MZW431) gyro unit (sold separately).
Specifications:
Length: 171mm
Width: 75mm
Height: 50mm
Wheelbase: 98mm (LL)
Tire(F/R): F8.5 mm / F8.5 mm (drift tires)
Gear Ratio: 7.23, 6.38, 6.0, 5.71, 5.34, 4.97, 4.5:1
RC system: KT-531P FHSS
Motor: 130 classFront Wheel Offset: Narrow +1.5mmRear Wheel Offset: Wide +1.5mm
Includes:
Factory assembled chassis with pre-installed R/C unit
Pre-painted factory assembled plastic body, finished with markings
2.4GHz Syncro KT-531P transmitter
Drift tires (installed)
Pinion gears (15T, 17T, 19T, 21T)
Spur gears for wheelbases: 27T, 29T, 31T for M, L
Pinion gear tool
Spare wheel nuts and wheel wrench
Needed to Complete:
(4) AAA-size alkaline batteries or Ni-MH batteries for chassis.
(4) AAA-size alkaline batteries for transmitter
This product was added to our catalog on September 2, 2021
KYO32643R, Kyosho MA-020 AWD Mini-Z ReadySet w/Nissan Skyline 2000GT-R Body (Red)
The Kyosho MA-020 AWD Mini-Z ReadySet with Nissan Skyline 2000GT-R Body brings high-performance racing into the hands of enthusiasts with a comprehensive mini RC car that is ready to race and drift as soon as you provide the needed AAA batteries (sold separately). Featuring the advanced MA-020 chassis with variable camber suspension, this model ensures superior handling and dynamic control. The inclusion of a specially designed circuit board and the compatibility with an optional gyro unit (KYOMZW446) available separately provides enhanced stability and precision, making it suitable for both beginners and experienced drivers. This ReadySet package is completed with a detailed scale body and a user-friendly 2.4GHz Syncro KT-531P transmitter, offering an authentic and thrilling driving experience.
This product was added to our catalog on September 17, 2024
KYO32891, Kyosho MR-04 EVO2 Mini-Z N-MM2 Brushless Chassis Set (5600kV)
Performance Mini-Z Chassis Roller & Brushless Motor
The MR-04EVO2 Mini-Z N-MM2 Brushless Chassis Set (5600kV) represents a significant leap forward in the top-tier MINI-Z series, offering a full model upgrade that pushes the boundaries of performance. Retaining the excellent MR-03 layout while introducing key enhancements, the MR-04EVO2 chassis achieves unparalleled performance improvements. The lower center of gravity (CG) resulting from the lower mounting of AAA batteries enhances stability through corners and elevates both speed and control. This thoughtful chassis design, coupled with the Sensored brushless motor, provides a total balance that takes performance to a higher level, making it a formidable competitor in the high-performance competition mini R/C car category.
Quality is evident in the meticulous design and engineering of the MR-04EVO2 chassis. The front suspension improvements, including an updated kingpin-integrated knuckle for enhanced camber stability, showcase a commitment to optimizing every detail. The geometric revisions of the caster and trail contribute to more linear maneuverability, allowing drivers precise control over their vehicles. The inclusion of a ball differential as standard further refines the driving experience, optimizing rotational differences between left and right rear wheels during turns and providing moderate slip action for improved traction. The silver clear anodized finish on aluminum parts not only contributes to durability but also adds a stylish touch that matches the chassis's exceptional performance.
What makes the MR-04EVO2 truly special is its adaptability and customization options. The chassis supports both narrow and wide tread settings, allowing enthusiasts to tailor their setup according to body type. Adjustable wheelbase adds another layer of customization, providing flexibility in chassis settings. The included brushless motor, Kyosho Speed House XSpeed 56 (5600kV) ensures the delivery of powerful, smooth and efficient performance! Taking the MR-04EVO2 to another level of dominance in the world of high-performance mini competition R/C cars, solidifying its position as one of the best of the best!
NOTE: This is an assembled chassis that still requires additional items to run. See needed to complete list below for a list of items required to complete the model.
Features:
Powerful Kyosho Speed House XSpeed 56 (5600kV) brushless motor
Lower CG design with lower battery mounting positions
Significant performance improvements
Updated kingpin-integrated knuckle to further improve camber stability
Adjustable wheelbase and tread settings
Adjustable wheelbase
Ball differential included as standard
Ball bearings have been changed to 3mm internal diameter for lower rotational resistance
Geometric revision of caster and trail
Improved linear maneuverability
Specifications:
Scale: 1/27
Length: 124.5mm
Width: 72-76mm
Height: 31mm
Wheelbase: 98.0mm (LL)
Weight: 135.5g
Front Tread: 58.5 / 65.0mm
Rear Tread: 61.5 / 65.0mm
Gear Ratio: 7.3 / 6.3 / 5.5 / 4.9 1
Motor: XSpeed 56 (5600kV)
Includes:
(1) MR-04EVO2 Mini-Z N-MM2 Brushless Chassis Set w/(5600kV) Motor
(1) Electronic speed controller (ESC)
6T / 7T / 8T / 9T Pinion gears
Pinion gear tool
Wheel wrench
Spare wheel nuts
Needed to Complete:
(1) 2-Channel Transmitter/Receiver system
(4) AAA Batteries for Chassis
(1) Body
(4) Tires
(4) Wheels
This product was added to our catalog November 22, 2024
KYO66610, Kyosho First Mini-Z RWD ReadySet w/Shelby Cobra 427 Body (Blue) w/2.4GHz Radio
The Kyosho RWD First Mini-Z ReadySet takes the MINI-Z concept to another level of user-friendly design, with a RWD drive train that any Mini-Z enthusiast will love! Widely popular and detailed bodies create this incredibly realistic model lineup. The set also includes a car body finished to display-model standard that matches the stunning style with the performance, reliability, and durability of Kyosho. The controller switch allows one-touch switching between training mode (Low) and race mode (High). Training mode is recommended for slow and deliberate driving and for practice controls, switch to racing mode to enjoy the thrill of high-speed action. This First Mini Z version is the perfect entry-level car to the mini and micro racing world and for those who are transitioning from toy grade to hobby grade cars.
Note:
Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems
This item is a Kyosho "Egg" product which is not rebuildable with no spare parts available separately
Features:
Officially licensed body
Updated realistic drive mechanism
Two speeds can be switched at the touch of a button
Digital transmitter with a stopwatch to time your laps
Head and tail LED lights includes
Clipless body mount system
Specifications:
Scale: 1/28
Length: 157mm
Width: 79mm
Height: 50mm
Weight: 114.5g
Chassis: RWD
Frequency: 2.4GHz (12 units can run simultaneously)
Running time: Approx. 60 min (with new alkaline batteries)
Includes:
(1) Factory assembled chassis
(1) Pre-painted plastic body, complete with markings
(1) 2.4GHz controller with stopwatch
(6) Mini pylons
(1) Trim adjuster
(1) Battery holder
Needed to Complete:
(4) AA alkaline or NiMH batteries for chassis
(4) AA alkaline batteries for KT-531P transmitter
This product was added to our catalog on September 17, 2024
KYO71998, Kyosho Speed House Mini-Z AAA NiMh Batteries (800HV) (4)
Kyosho Speed House "800HV" Mini-Z AAA NiMh Batteries provide great power and good runtime for any Mini-Z platform. Kyosho Speed House Mini-Z USB Charger (KYO71999) is recommended for charging applications.
This product was added to our catalog on October 31, 2024
KYO82044, Kyosho Futaba Mini-Z Evo2 Receiver Unit
Kyosho Futaba Mini-Z Evo2 Receiver Unit. This optional receiver is designed for Mini-Z platforms to allow racers to use their Futaba 10PX, 4PM Plus, PX/R, 7XC and 4PM Evo transmitters! Package includes one Mini-Z Evo2 receiver unit for Futaba transmitters.
This product was added to our catalog on September 9, 2024
KYO82151-11, Kyosho FLYSKY RM005 Module (Mini-Z/FHSS)
Kyosho FLYSKY RM005 Module. This optional module is designed for the Noble NB4 Transmitter. Using this will allow you to control the Mini-Z EVO receiver with the Noble NB4 transmitter. Package includes one transmitter module.NOTE: It is necessary to insert this module into the slot in the grip of Noble NB4, download the compatible firmware (Ver.2.0.97), and update the transmitter.
This product was added to our catalog on November 12, 2024
KYOET001X, Kyosho Easylap Micro Transponder
The EasyLap Micro Transponder is an incredibly small and lightweight transponder optimized for Mini-Z and similar micro class cars. Compatible with EasyLap & Robitronic Lap Counter systems, this transponder measures 10.5x9.5x5.8mm and includes cable for Mini-Z ASF, Pro, Evo, RWD/AWD RTR and 3 pin JST connector.
NOTE: If used on MR03 "Sports" or AWD "Sports" (blue antenna) KYOET009-S cable is required.
Features:
Compatible with EasyLap & Robitronic Lap Counter systems
Updated smaller version 10.5x9.5x5.8mm
Includes cable for Mini-Z ASF, Pro, Evo, RWD/AWD RTR and 3 pin JST connector
This product was added to our catalog on November 25, 2024
KYOET009-S, Kyosho Mini-Z Sports EasyLap Connect Cable
Kyosho Mini-Z Sports EasyLap Connect Cable. This cable allows the EasyLap Micro Transponder to be used with Kyosho Mini-Z Sports Models.
This product was added to our catalog on November 25, 2024
KYOFAB605WH, Kyosho Toyota Supra Pre-Painted Body Set
Kyosho Toyota Supra Pre-Painted Body Set. This optional Supra body set is intended for the Kyosho Fazer Mk2 FZ02, however, it will fit most bodies with a 260mm wheelbase. Package includes one pre-painted, trimmed and assembled body.
This product was added to our catalog on September 17, 2024
KYOMDW018, Kyosho AWD Ball Differential Set
This is an optional Kyosho Ball Differential Set, and is intended for use with the Kyosho Mini-Z MA-010, MA-015, MA-020, MA-030EVO, and other current AWD chassis. This ball differential will provide increased traction, smooth cornering, and stable differential action.
This product was added to our catalog on October 31, 2024
KYOMDW023, Kyosho Mini-Z X-Speed V Motor
This is an optional Kyosho Mini-Z X-Speed V Motor, and is intended for use with the Kyosho Mini-Z MB-010 Ultima and Optima buggies, as well as the MA-010 and MA-015 AWD Mini-Z's. This is a high revving motor that provides increased top speed and acceleration.
This product was added to our catalog on September 9, 2024
KYOMDW201, Kyosho MA-020 Front Spring Set
Kyosho MA-020 Front Spring Set. This optional Mini-Z spring kit is a must have for getting your chassis tuned. Package includes 5 spring sets, from soft to hard.
Includes:
Red - Soft
Purple - Medium Soft
Green - Medium (standard)
Orange - Medium Hard
Yellow - Hard
This product was added to our catalog on October 31, 2024
KYOMZ604, Kyosho Mini-Z XSpeed 85 Brushless Motor (8500KV)
Kyosho MINI-Z XSpeed 85 Brushless Motor. Package includes one 8500kv brushless motor with factory installed bullet connectors.
This product was added to our catalog on September 9, 2024
KYOMZN189, Kyosho Mini-Z MR-03W-MM Audi R8 2015 LMS Body (Unpainted)
The Kyosho Mini-Z MR-03W-MM Audi R8 2015 LMS Body is a detailed body option for the MR-03W-MM platform chassis. This body is equally suited to use as a display model, or to give your existing model a face lift. Package includes one un-painted body, four wheels, one window insert and accessory parts trees to complete the body. NOTE: Body included will be white in color and not painted.
This product was added to our catalog on October 31, 2024
KYOMZP451R, Kyosho Mini-Z MA-020 Dodge Challenger SRT Hellcat Body (Tor Red)
Body Overview:
The Kyosho Mini-Z MA-020 Dodge Challenger SRT Hellcat Body is a ready to install body option for the MA-020 platform chassis. This body is equally suited to use as a display model, or to give your existing model a face lift. Package includes one pre-painted body and one display stand.
Note: Photo shows the body assembled and mounted on an MA-020 chassis. The chassis is not included with this product and the body requires assembly.
Specifications:
Wheelbase: 98mm (LL)
Wheel Offset: F: +1.5mm / R: +1.5mm
Wheel Width: F: 8.5mm / R: 8.5mm
This product was added to our catalog November 22, 2024
KYOMZW1, Kyosho Mini-Z Ball Bearing Set (7)
This is an optional Kyosho Ball Bearing Set, and is intended for use with the Kyosho Mini-Z MR-02 and MR-03 chassis. These replace the standard kit bearings with high quality precision bearings that will help to reduce friction and increase run time. The package includes seven bearings, four for the front wheels, two that are installed inside the motor mount, and one goes on the rear wheel closest to the gears and differential.
This product was added to our catalog on October 31, 2024
KYOMZW121, Kyosho MINI-Z Bag
This is a Kyosho MINI-Z Bag, a great addition to your storage needs. This small bag is ideal for transporting or storing your Mini-Z Ready set, tools and spare parts. The incorporated padded dividers, pockets and rubber bands all help to keep tools and components securely in place. The outside of the bag is embroidered with the "Kyosho Mini-Z" logo to rep the brand in quality fashion.
Specifications:
Dimensions: 280x200x75mm
This product was added to our catalog on September 9, 2024
KYOMZW202, Kyosho MM-Type Rear Spring Set (3)
This is an optional Kyosho MM-Type Rear Spring Set, and is intended for use with the Kyosho Mini-Z MR-015, MR-02 and MR-03 MM-Type chassis. This package includes three springs, allowing you to tune your Mini-Z to a variety of track conditions. The red spring is soft, the green spring is medium and the yellow spring is hard.
This product was added to our catalog on October 31, 2024
KYOMZW308, Kyosho Mini-Z MR-03 Ball Differential Set II (LM Only)
The Kyosho Mini-Z MR03 Ball Differential Set II is an optional upgrade for the Mini-Z MR03 with LM motor mount. This differential is lighter than the stock parts and offers improved left/right weight distribution. Additionally, a set screw can be added to the threaded hole on the left wheel hub
This product was added to our catalog on November 12, 2024
KYOMZW38-20B, Kyosho Mini-Z 11mm Wide Racing Radial Tire (4) (20 Shore)
This is a set of four Kyosho 11mm Racing Radial Tires. These radial tires are used with the Mini-Z Racer series kits, and feature a special patterned edge that is effective on both urethane and carpet surfaces. Specific left and right sides feature a directional pattern and the durometer hardness rating is etched on the inside of the tire.Choose from 10, 20, 30 or 40 Shore compounds (softest to hardest). Use different compounds to tune the level of traction for various track conditions; softer when you need more grip and harder when you want less grip. These tires must be used with 11mm wide wheels.
This product was added to our catalog on October 31, 2024
KYOMZW38-30, Kyosho Mini-Z 11mm Wide Racing Radial Tire (4) (30 Shore)
This is a set of four Kyosho 11mm Racing Radial Tires. These radial tires are used with the Mini-Z Racer series kits, and feature a special patterned edge that is effective on both urethane and carpet surfaces. Specific left and right sides feature a directional pattern and the durometer hardness rating is etched on the inside of the tire.Choose from 10, 20, 30 or 40 Shore compounds (softest to hardest). Use different compounds to tune the level of traction for various track conditions; softer when you need more grip and harder when you want less grip. These tires must be used with 11mm wide wheels.
This product was added to our catalog on September 9, 2024
KYOMZW38-40, Kyosho Mini-Z 11mm Wide Racing Radial Tire (4) (40 Shore)
This is a set of four Kyosho 11mm Racing Radial Tires. These radial tires are used with the Mini-Z Racer series kits, and feature a special patterned edge that is effective on both urethane and carpet surfaces. Specific left and right sides feature a directional pattern and the durometer hardness rating is etched on the inside of the tire.
Choose from 10, 20, 30 or 40 Shore compounds (softest to hardest). Use different compounds to tune the level of traction for various track conditions; softer when you need more grip and harder when you want less grip. These tires must be used with 11mm wide wheels.
This product was added to our catalog on September 9, 2024
KYOMZW39-30, Kyosho Mini-Z Low Height Slick Tires (4) (30 Deg)
Kyosho Low Height Slick Tires are a low profile tire option for your Kyosho Mini-Z. These tires will smooth out steering response, making the car easier to drive on urethane/RCP track surfaces. Use the menu above to choose from 40, 30 or 20 degree durometer options. Package includes four tires.
This product was added to our catalog on September 9, 2024
KYOMZW39-40, Kyosho Mini-Z Low Height Slick Tires (4) (40 Deg)
Kyosho Low Height Slick Tires are a low profile tire option for your Kyosho Mini-Z. These tires will smooth out steering response, making the car easier to drive on urethane/RCP track surfaces. Use the menu above to choose from 40, 30 or 20 degree durometer options. Package includes four tires.
This product was added to our catalog on September 9, 2024
KYOMZW401, Kyosho Front Spring Set (10)
This is an optional Kyosho Front Spring Set, and is intended for use with the Kyosho Mini-Z MR-03. This package includes five sets of springs, allowing you to tune your Mini-Z to a variety of track conditions. The red springs are soft, the purple springs are medium soft, the green springs are medium, the orange springs are medium hard and the yellow springs are hard.
This product was added to our catalog on October 31, 2024
KYOMZW403, Kyosho MM/LM-Type Carbon Fiber Rear Suspension Plate Set
This is an optional Kyosho MM/LM-Type Carbon Fiber Rear Suspension Plate Set, and is intended for use with the Kyosho Mini-Z MR-03 MM and LM-Type chassis. This suspension plate set will increase the rigidity in the rear of the chassis and is ideal for high traction surfaces. Includes three different width plates, each with different levels of rigidity and will allow you to tune the flex of the chassis to suit a variety of track conditions.
This product was added to our catalog on October 31, 2024
KYOMZW404, Kyosho RM/HM-Type Carbon Fiber Rear Suspension Plate Set
This is an optional Kyosho RM/HM-Type Carbon Fiber Rear Suspension Plate Set, and is intended for use with the Kyosho Mini-Z MR-03 RM and HM-Type chassis. This suspension plate set will increase the rigidity in the rear of the chassis and is ideal for high traction surfaces. Includes three different width plates, each with different levels of rigidity and will allow you to tune the flex of the chassis to suit a variety of track conditions.
This product was added to our catalog on October 31, 2024
KYOMZW407, Kyosho Mini-Z MR-03 SP Stainless King Pin Ball Set
This is an optional Kyosho SP Stainless King Pin Ball Set, and is intended for use with the Mini-Z MR-03 chassis. Precision machined from stainless steel, these king pin balls deliver smooth front suspension movement, improving the overall performance of the chassis.
This product was added to our catalog on October 31, 2024
KYOMZW409, Kyosho MM/LM-Type FRP Rear Suspension Plate Set
Kyosho MM/LM-Type FRP Rear Suspension Plate Set
This product was added to our catalog on October 31, 2024
KYOMZW437, Kyosho FRP Rear Suspension Plate Set (0.5mm) (MR-03MM/LM/MM2)
Kyosho FRP Rear Suspension Plate Set. This optional suspension plate set is intended to fit the Mini-Z MR-03MM, LM, and MM2 vehicles. Included are soft, medium and hard plates giving you the ability to tune the suspension to your preference. Package includes one soft rear suspension plate, one medium rear suspension plate and one hard rear suspension plate.
This product was added to our catalog on October 31, 2024
KYOMZW439R, Kyosho Mini-Z LED Light Set (Clear & Red) (ICS Connector)
This is an optional Kyosho Mini-Z Clear and Red LED Light Set. These lights fit ASF and MHS boards (Black or red antenna) with ICS connector port.
Note: DOES NOT FIT Sports/RWD/FWD/AWD (blue or white chassis antenna)
This product was added to our catalog on November 12, 2024
Kyosho MR-03 RWD Mini-Z ReadySet w/Honda NSX Body w/KT-531P 2.4GHz Radio
This is the Kyosho MR-03 RWD Mini-Z ReadySet with Honda NSX Body. Kyosho's MINI-Z Racer Sports MR-03 first launched in 2013, and Kyosho has since revitalized the concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD series!
Chassis & Body
This set includes a Honda NSX car body finished to display model standards that match stunning style with the same performance, reliability, and durability of the MR-03 chassis.** The body and chassis work hand in hand to offering fun anytime and anywhere. The control program on the circuit board offers linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (KYOMZW446).
Electronics
Powered by a brushed motor, this MR-03 is designed to deliver smooth power and fun speeds. The main electronics board supplies power to the motor, as well as the servo. Four AAA batteries are all that is required to power the chassis making it easy to get started right out of the box.
Transmitter
The 2.4GHz KT-531P features steering and throttle trim as well as dual rate adjustment of steering angle and control for the flashing speed of optional LEDs.*** In addition, the transmitter has a Training Mode feature which limits speed of the car for easy learning (default setting at the time of shipment is Training Mode).
Features:
Circuit board with developed control program offers dramatically improved steering and feel
Highly detailed display standard body is fully factory finished
Full ball bearing specifications include 7 bearings, previously an optional upgrade
Front suspension incorporates VCS (Vehicle Stability Control) that optimizes camber angle with suspension stroke
Compatible with optional gyro unit (MZW446). Volume of gyro effect can be adjusted on the chassis
Compatible with a huge lineup of optional parts for MR-03 that allows you to improve your machine according to your skill level
Item Added to our Inventory on: August, 28 2024
PHBPHT004, Power Hobby Kyosho Mini-Z Magentized Mini Tools Driver Set
Powerhobby Kyosho Mini-Z Magentized Mini-Z Tools Driver Set
This product was added to our catalog on September 9, 2024
