Products
LOSI LOS01019T1, Mini-T 2.0 2WD Stadium Truck Brushless RTR, Red
LOS01019T1, Mini-T 2.0 2WD Stadium Truck Brushless RTR, Red
$229.99
LOSI LOS01019T2, Mini-T 2.0 2WD Stadium Truck Brushless RTR, Blue
LOS01019T2, Mini-T 2.0 2WD Stadium Truck Brushless RTR, Blue
$229.99
Losi LOS05020V2, Losi Desert Buggy DB XL-E 2.0 8S 1/5 RTR 4WD Electric Buggy w/DX3 Radio, Smart ESC & AVC
LOS05020V2, Losi Desert Buggy DB XL-E 2.0 8S 1/5 RTR 4WD Electric Buggy w/DX3 Radio, Smart ESC & AVC The Losi Desert Buggy DBXL-E 2.0 8S 1/5 RTR 4WD Electric Buggy is a large scale basher that offers agile handling, high speeds out of the box and legendary durability that make it a fan favorite. At home in any environment from dirt to pavement, wet or dry, especially with its 4WD drivetrain with larger 5mm drive pins, the desert buggy makes sure all the power is put to the ground. Drivers stay in control with a DX3 transmitter, a Spektrum SR6100AT 6 Channel AVC Telemetry Surface Receiver, and scale-to-size Maxxis Creepy Crawler LT tires. This desert buggy features all the technological advances drivers demand including the Spektrum Firma 160 Amp Brushless Smart ESC and Spektrum Firma 4-Pole 780Kv Brushless Motor allowing you to hit 50+ MPH with an 8 cell LiPo battery. Combine this with Fox Shox race-inspired motorsports themed livery, and you get an authentic looking large scale buggy with the speed and durability needed to outrun the pack. Features: Spektrum™ Firma® 160 Amp Brushless Smart ESC Spektrum Firma 4-Pole 780Kv Brushless Motor Spektrum DX3™ radio system Spektrum S906 1/5th Scale Metal Gear Servo Waterproof Components Aluminum Shock Towers Aluminum Center Diff Cup Radio Tray designed for use with single or dual steering servos. Heavy Duty Drivetrain with 5mm drive pins Electric Chassis specific chassis braces for increased durability and strength Updated ESC Mount Pinned Center Outdrive Cups Gearboxes updated for improved drivetrain strength and stability Steering Rack with a helical servo saver design Updated Front and Rear Bulkheads Maxxis Creepy Crawler LT Tires Fox Shox race-inspired Motorsports themed livery Laser Etched FOX Logo Shock Caps Roof-mounted LED bar Specifications: Approximate Assembly Time: Less than 1 Hour Ball Bearings: Full set Battery: Sold Separately Body: Screen printed polycarbonate panels Brakes: Integrated with ESC Charger: Sold Separately Chassis: 0.16" (4mm) thick 6061-T6 aluminum with stiffening plate Completion Level: Ready-To-Run Differential: Bevel gear, sealed, oil-filled Drivetrain: 4WD Final Drive Ratio: 12.82:1 Power Type: Electric Gear Pitch: 1.5 Module Ground Clearance: 2.75" (552mm) Internal Gear Ratio: 3.33:1 Max Battery Dimensions: 6.5 x 2 x 0.87" (165 x 52 x 22mm) Motor Size: 56113 4-pole 780Kv Motor Type: Brushless Pinion: 13T Product Height: 12.5" (318 mm) Product Length: 33.25" (845 mm) Product Weight: 28.3 lbs (12.8kg) w/o batteries, 30.5 lbs (13.8kg) with batteries Product Width: 19.5" (495 mm) Radio: Included Receiver: Included Scale: 1/5 Servos: Included Shock Type: Oil-filled, aluminum body Speed Control: Included Spur Gear: 50T Suspension: Independent Technology: Smart Tire Tread: Creepy Crawler Vehicle Type: Buggy Water-Resistant: Yes Wheelbase: 21.75" (552 mm) Wheel Width: 3.0 Includes: (1) Losi® DBXL-E 2.0 Desert Buggy (1) Spektrum Firma® 160 Amp Brushless Smart ESC (installed) (1) Spektrum Firma 4-Pole 780Kv Brushless Motor (installed) (1) Spektrum™ DX3™ Radio System (1) Product Manual Needed to Complete: (2) 4S 5000mAh 50C+ LiPo Hardcase Batteries with IC5 or EC5 connector Compatible LiPo charger This product was added to our catalog on March 30, 2023
$1,199.99
ProTek RC PTK-5141-22, ProTek RC 2S 50C 1100mAh Losi Mini T/B & JRX2 LiPo Battery w/EC2 Connector
PTK-5141-22, ProTek RC 2S 50C 1100mAh Losi Mini T/B & JRX2 LiPo Battery w/EC2 Connector The Protek R/C 2S 50C 1100mAh Losi Mini T/B and JRX2 LiPo Battery is built with performance in mind. Using Silicon Graphene technology this battery packs a punch with it's 50c discharge rating! Designed to work with the Losi Mini T, B and Mini JRX2 this pack offers extended runtimes with it's larger 1100mah capacity. Equipped with an EC2 style connector makes this a plug in option with no need to mess with adapters or to get out the soldering iron. With more time on the track and the ability to dish out the power this Protek battery pack is an excellent upgrade for your Mini T, B or JRX2 vehicles. Features: Direct fit for Losi Mini B, T and JRX2 vehicles More runtime, with a dramatic increase in punch Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! Factory installed EC2 plug Battery Model 2s 50C 1100mAh Application Air, Ground Type Silicon Graphene Voltage 7.4V nominal Capacity @7.4V 1100mAh Weight 68g Connector Type EC2 Balance Connector XH Connector Number of Cells 2 Cell Configuration 2S1P Dimensions (LxWxH) 58x32x20mm Maximum Charge Rate 4C (4.4A) Watt Hour @7.4V 8.14Wh Includes: (1) ProTek R/C Battery This product was added to our catalog on September 1, 2022
$29.99
RPM RPM81092, RPM Losi Tenacity/Lasernut Rear A-Arm (Black) (2)
RPM81092, RPM Losi Tenacity/Lasernut Rear A-Arm (Black) (2) This product was added to our These are the RPM Losi Tenacity/Lasernut Rear A-Arms. Each pair of RPM A-arms is molded in a blend of nearly indestructible nylons and manufactured in the USA. These A-arms are designed to withstand even the toughest conditions, so you can push your vehicle to the limit without worrying about breakage. Performance has been improved by tightening the tolerances of the A-arm to create much smoother, more consistent suspension movement for reliable camber, caster, and toe angle settings. The suspension geometry is set to stock settings, which makes installing a set of RPM A-arms a simple swap with very little needed to be done to get back on the track. RPM Tenacity and Lasernut A-arms feature a slim, aerodynamic shape that helps them transition up and over objects, rather than bluntly plowing into them. Designed with 30° leading and trailing edges, gives each A-arm a sleek look and feel. To provide additional strength where it's needed most, RPM has beefed up key areas such as the outer hinge pin support diameters by as much as 60%. This means that even less than perfect “incidents” won’t end your day of fun. Experience unparalleled performance on the track or off-road with these ultra strong, incredibly durable A-arms. Package includes two rear A-arms with hardware. NOTE: RPM Rear A-arms for the Losi Tenacity fit the following Tenacity platforms: U4 Lasernut, TT and DB. Also fits the following discontinued models: Pro, Monster Truck and T. RPM Rear A-arms replace stock Losi LOS234017. This product was added to our catalog on November 21, 2023
$15.95
RPM RPM81662, RPM Losi Tenacity/Lasernut Front A-Arm (Black) (2)
RPM81662, RPM Losi Tenacity/Lasernut Front A-Arm (Black) (2) These are the RPM Losi Tenacity/Lasernut Front A-Arms. Each pair of RPM A-arms is molded in a blend of nearly indestructible nylons and manufactured in the USA. These A-arms are designed to withstand even the toughest conditions, so you can push your vehicle to the limit without worrying about breakage. Performance has been improved by tightening the tolerances of the A-arm to create much smoother, more consistent suspension movement for reliable camber, caster, and toe angle settings. The suspension geometry is set to stock settings, which makes installing a set of RPM A-arms a simple swap with very little needed to be done to get back on the track. RPM Tenacity and Lasernut A-arms feature a slim, aerodynamic shape that helps them transition up and over objects, rather than bluntly plowing into them. Designed with 30° leading and trailing edges, gives each A-arm a sleek look and feel. To provide additional strength where it's needed most, RPM has beefed up key areas such as the outer hinge pin support diameters by as much as 60%. This means that even less than perfect “incidents” won’t end your day of fun. Experience unparalleled performance on the track or off-road with these ultra strong, incredibly durable A-arms. Package includes two front A-arms with hardware. NOTE: RPM Front A-arms for the Losi Tenacity fit the following Tenacity platforms: U4 Lasernut, TT and DB. Also fits the following discontinued models: Pro, Monster Truck and T. RPM Rear A-arms replace stock Losi LOS234016. Does not include metal tubes for outer hinge pins. Transfer of stock metal tubes to RPM a-arms is required. This product was added to our catalog on November 25, 2023
$15.95
