MR324, Magnolia Late Model 1/18th
Little Cars for BIG FUN!
The “Magnolia” is a 1/18th scale Dirt Late Model body designed specifically for the Traxxas LaTrax Rally 1/18 4wd.
Named after an iconic track known as “The Mag” located in Columbus MS, this little firecracker will not disappoint. It comes with pre-marked mounting holes, easy to follow cut lines, and pre cut window masks. The last picture is how the mounts need to be set up to best suit the body.
*Body will come clear with overspray film, and window masks.
Made in the USA with genuine .030 American Made Lexan.
This product was added to our catalog on June 1, 2023
MR326, "EL Jefe" NextGen Camaro 1/18th
Little Cars for BIG FUN!
The “EL Jefe” is a 1/18th scale NextGen Camaro body designed specifically for the Traxxas LaTrax Rally 1/18 4wd.
We nicknamed this body "EL Jefe" aka "The Boss" because this spicy little guy will be taking command on the track, in the driveway, or across your living room!
Included with the body: Easy to follow cut lines, pre-cut decal detail sheet, pre-cut window masks, spoiler, and hardware. The last picture is how the mounts need to be set up to best suit the body. This body will require the chassis to be used in the short wheelbase to match perfectly with the wheel wells.
Made in the USA with genuine .030 American Made Lexan.
This product was added to our catalog on June 1, 2023
MR707, McAllister Foam Car Stand #707
-Foam car stand embossed with the classic McAllister flying M.
-Lightweight and durable foam that will not be damaged by tire prep or most other RC products.
-Measures: 7 x 4 x 1.5"
This product was added to our catalog on June 1, 2023
RPM70795, RPM LaTrax Teton/Rally Front/Rear Chassis & Differential Covers
This is the RPM LaTrax Teton/Rally Front/Rear Chassis and Differential Covers. These tough covers offer the incredible strength that RPM parts are known for. By rerouting the upper chassis plates around the outside of the pivot ball mounts this has allowed RPM to link the pivot ball mount directly into the differential bulge. This creates a much stronger setup along with being combined with RPM's engineering grade materials gives you an excellent boost in strength. Package includes one front chassis cover, one rear chassis cover, one front differential cover and one rear differential cover.
This product was added to our catalog on October 26, 2023
RPM70862, RPM LaTrax Front/Rear Suspension Arm (2)
This is an optional set of two RPM LaTrax Front or Rear Suspension Arms, intended for use with the Traxxas LaTrax Prerunner, Teton or SST kits. These lightweight optional parts are a strong, rigid upgrade for your 1/18th scale Latrax. Features:Sold in pairsLightweight, rigid option over stock partsMade in the USA
This product was added to our catalog on December 16, 2021
TFE2473, FastEddy Traxxas LaTrax Rally 1/18 Bearing Kit
Team FastEddy LaTrax Rally 1/18 Bearing Kit. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(2) 4x8x3
(8) 6x10x3
(5) 8x12x3.5
NOTE:
Photo of unpackaged bearings shows random bearings and is not representative of what you will receive.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK your R/C before ordering to make sure you get all the proper bearings. FastEddy does their best to keep the kits updated. If you find a variation or mistake in this kit, please contact us.
This product was added to our catalog on June 29, 2021
TRA2065R, Traxxas Servo Sub-Micro Waterproof Metal Gear
Servo, sub-micro, waterproof, metal gearThe 2065R waterproof sub-micro servo adds the superior durability of all-metal gears for the best driving experience possible.
Accessory part for these models:
1/18 LaTrax® Desert Prerunner
1/18 LaTrax® Rally
1/18 LaTrax® Teton®
Summit
TRX-4M™ 1/18 Ford® Bronco®
TRX-4M™ 1/18 Land Rover® Defender®
TRX-4® 1979 Chevrolet® Blazer®
TRX-4® 1979 Ford® Bronco®
TRX-4® Chevrolet® K10 High Trail Edition™
TRX-4® Equipped with Traxx®
TRX-4® Ford® Bronco®
TRX-4® Ford® F-150® High Trail Edition™
TRX-4® Land Rover® Defender®
TRX-4® Sport Unassembled Kit
TRX-4® Sport
TRX-4® Unassembled Kit
TRX-6® Mercedes-Benz® G 63® AMG 6X6
This product was added to our catalog on September 7, 2021
TRA3047, Traxxas LaTrax 2.4GHz Transmitter
This is a replacement LaTrax 2.4GHz Transmitter.
Features:
2-channel transmitter
Servo reversing
Electronic steering trim controls
Low battery indicator
Internal antenna
Distinctive, ergonomic, contour grip
This product was added to our catalog on March 16, 2022
TRA7060, Traxxas Aluminum Finned Motor Mount 1/16
The finned aluminum motor mount connects to the 7090 aluminum motor plate to provide a solid mounting surface for the Velineon® 380 brushless motor. Does not fit Titan® motor or 7380 motor plate.
This product was added to our catalog on September 7, 2021
TRA7511, Traxxas LaTrax 1/18 Rally Body (Clear)
This is an optional LaTrax 1/18 Rally Clear Body. This tough, rally-inspired body design is clear, pre-cut and ready for your custom paint job. Package includes a body and window/grill detail decals.
This product was added to our catalog on September 7, 2021
TRA7538X, Traxxas LaTrax Steering Bellcrank Set
This is a replacement LaTrax Steering Bellcrank Set. Package includes steering bellcranks, servo saver, spring, spring retainer, posts and draglink.
This product was added to our catalog on May 7, 2021
TRA7541X, Traxxas LaTrax Bearing Set
This is an optional LaTrax Bearing Set. Package includes all the bearings needed to convert the entire drivetrain to bearings. This helps to improve speed and efficiency compared to the bushings that are included in the kit.
Includes:
(2) 4x8mm Bearings
(8) 6x10mm Bearings
(5) 8x12mm Bearings
This product was added to our catalog on September 7, 2021
TRA7542, Traxxas LaTrax Body Clips (12)
This is a pack of twelve replacement LaTrax Body Clips.
This product was added to our catalog on September 7, 2021
TRA7550, Traxxas LaTrax Front & Rear Driveshaft Set (4)
This is a replacement LaTrax Front & Rear Driveshaft Set. Package includes four driveshafts that can be used in either the front or rear, and on the right or left side of the chassis.
This product was added to our catalog on September 7, 2021
TRA7573, Traxxas LaTrax Pre-Mounted Slick Tires & 12-Spoke Wheels (Chrome) (2)
This is a pack of two optional LaTrax Pre-Mounted Slick Tires & 12-Spoke Wheels. Change up the look of your LaTrax Rally with these high traction slick tires, pre-mounted on custom chrome wheels.
This product was added to our catalog on September 7, 2021
TRA7573A, Traxxas LaTrax Pre-Mounted Slick Tires & 12-Spoke Wheels (Black Chrome) (2)
This is a pack of two optional LaTrax Pre-Mounted Slick Tires & 12-Spoke Wheels. Change up the look of your LaTrax Rally with these high traction slick tires, pre-mounted on custom black chrome wheels.
This product was added to our catalog on September 7, 2021
TRA7573R, Traxxas LaTrax Pre-Mounted Slick Tires & 12-Spoke Wheels (Blue Chrome) (2)
This is a pack of two optional LaTrax Pre-Mounted Slick Tires & 12-Spoke Wheels. Change up the look of your LaTrax Rally with these high traction slick tires, pre-mounted on custom blue chrome wheels.
This product was added to our catalog on September 7, 2021
TRA7573X, Traxxas LaTrax Pre-Mounted Slick Tires & 12-Spoke Wheels (Red Chrome) (2)
This is a pack of two optional LaTrax Pre-Mounted Slick Tires & 12-Spoke Wheels. Change up the look of your LaTrax Rally with these high traction slick tires, pre-mounted on custom red chrome wheels.
This product was added to our catalog on September 7, 2021
TRA7641, Traxxas LaTrax Spur Gear (61T)
This is a replacement Traxxas LaTrax 61 Tooth Spur Gear for use with the LaTrax 1/18 Desert Runner and 1/18 Teton.
This product was added to our catalog on September 7, 2021
TRA7644, Traxxas LaTrax Pinion Gear (9T)
9-tooth pinion gear. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Includes motor mount screws and spacer.
This product was added to our catalog on September 7, 2021
TRA7645, Traxxas LaTrax Pinion Gear (10T)
Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.
Accessory part for these models:
1/18 LaTrax Desert Prerunner
1/18 LaTrax Rally
1/18 LaTrax Teton
This product was added to our catalog on September 7, 2021
TRA7650, Traxxas LaTrax Front/Rear Assembled Driveshaft (2)
This is a pack of two replacement LaTrax Driveshafts. These driveshafts come fully assembled and can be used in the front or rear of the vehicle.
This product was added to our catalog on May 11, 2021
TRA7650R, Traxxas LaTrax Aluminum Front/Rear Driveshaft (2) (Blue)
This is a pack of two optional LaTrax Aluminum Driveshafts. These blue anodized driveshafts are crafted from 6061-T6 aluminum alloy material and provide a direct fit for either the front or rear location in the vehicle. Package also includes two axle screws.
This product was added to our catalog on April 19, 2021
TRA7660, Traxxas LaTrax Assembled Oil Shocks w/Springs (2)
This is a pack of two replacement LaTrax Oil Shocks with Springs. These shocks are factory assembled, and include a bottle of 20wt silicone shock oil.
This product was added to our catalog on September 7, 2021
TRA7662, Traxxas LaTrax Shock Rebuild Kit (2)
Rebuild kit for LaTrax Teton and Prerunner oil-filled shocks includes O-rings, bladders, pistons, shaft guides, E-clips, shock caps, and rod ends. Renews two shocks.
This product was added to our catalog on September 7, 2021
