HRAERVT46M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (46T) Traxxas E-Revo VXL 2.0 Traxxas Maxx Traxxas X-Maxx Traxxas XO-1 Traxxas XRT The Hot Racing hardened steel Mod 1 spur gear is an optional upgrade for the Traxxas E Revo 2.0, X-Maxx 6S and 8S, Maxx 4S and XO-1 models. Choose from 50, 52 and 54 tooth options. NOTE: Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 Adjusting Gear Mesh) With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them. Features: CNC machined hardened steel construction Black oxide finished Laser etched tooth count marking Upgrade for factory plastic spur gear Specifications: Overall diameter: 52.8mm Gear face width: 8mm  Includes: One (1) mod 1 steel spur gear This product was added to our catalog on December 16, 2021

Read more less

HRASTE872, Hot Racing Traxxas 48P Hardened Steel Spur Gear (72T) This product was added to our catalog on December 16, 2021

Read more less

HRASTE873, Hot Racing Traxxas 48P Hardened Steel Spur Gear (73T) The Hot Racing Traxxas 48P Hardened Steel Spur Gear is an optional spur gear intended for the Traxxas Bandit, 2WD Slash, Rustler, 2WD Stampede, and Telluride models. The spur gear is available in a variety of tooth count options, please select the specific gear you want from the list above. Package includes one spur gear and mounting hardware. NOTE: Motor temperature should never exceed 180F (under 160 recommended). ESC temperatures should never exceed 160F. Excessive temperatures will shorten the life of the electronics. Features: CNC machined and lightened hardened steel construction Replaces stock nylon spur gear Black oxide coated gear for durability and corrosion resistance Red anodized countersunk aluminum washers High strength hardware Specifications: Gear Pitch: 48 pitch Mounting Holes: 3 Tooth Face width: ~5mm This product was added to our catalog on May 16, 2021

Read more less

HRASTE876, Hot Racing Traxxas 48P Hardened Steel Spur Gear (76T) Compatibility Traxxas Bandit Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd Traxxas Telluride 4x4 The Hot Racing Traxxas 48P Hardened Steel Spur Gear is an optional spur gear intended for the Traxxas Bandit, 2WD Slash, Rustler, 2WD Stampede, and Telluride models. The spur gear is available in a variety of tooth count options, please select the specific gear you want from the list above. Package includes one spur gear and mounting hardware.NOTE: Motor temperature should never exceed 180F (under 160 recommended). ESC temperatures should never exceed 160F. Excessive temperatures will shorten the life of the electronics. Features: CNC machined and lightened hardened steel construction Replaces stock nylon spur gear Black oxide coated gear for durability and corrosion resistance Red anodized countersunk aluminum washers High strength hardware Specifications: Gear Pitch: 48 pitch Mounting Holes: 3 Tooth Face width: ~5mm This product was added to our catalog on February 21, 2022

Read more less

HRASTE886, Hot Racing Traxxas 48P Hardened Steel Spur Gear (86T) This product was added to our catalog on December 16, 2021

Read more less

TRA4628X, Traxxas Differential Output Yokes (Hardened Steel) Fits: Traxxas Bandit Traxxas Nitro 4-Tec Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Stampede Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd This product was added to our catalog on April 12, 2021

Read more less

TRA6438, Spur gear, 44-tooth (machined, hardened steel) (wide face) (1.0 metric pitch) 44-tooth spur gear (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. This item was added to our catalog March 13, 2024

Read more less

TRA6888X, Traxxas Hardened Steel Front Drive Hub Traxxas Hoss Traxxas Rally Traxxas Rustler 4x4 Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede 4x4 Traxxas Telluride 4x4 Traxxas XO-1 This product was added to our catalog on September 7, 2021

Read more less

TRA8940, Traxxas Maxx Hardened Steel Suspension Screw Pins (10) Suspension screw pin set, front or rear (hardened steel), 4x18mm (4), 4x38mm (2), 4x33mm (2), 4x43mm (2)Hardened steel suspension screw pin set includes 4x18 mm pins (4), 4x38 mm pins (2), 4x33 mm pins (2), and 4x43 mm pins (2). One pin set required per axle, two per truck. This product was added to our catalog on September 7, 2021

Read more less

Traxxas 32P Heavy Duty Pinion Gear Traxxas 32P Heavy Duty Pinion Gear. This is the optional heavy duty, hardened steel pinion. The 32 pitch HD gears are available in a variety of tooth count options. Package includes one pinion gear and one set screw. This product was added to our catalog on April 17, 2021

Read more less

YEA-MG-10010, Yeah Racing Hardened Steel Mod 1 Pinion Gear (5mm Bore) (20T) Yeah Racing Hardened Steel Mod 1 Pinion Gear. Made from HD steel for extreme durability and strength. These pinions use a 5mm bore and are laser etched with pitch and teeth count for easy identification. These pinions are available in multiple sizes. Please select the size you need from the list above. Features: Made from hardened steel Uses a 5mm bore Laser etched with pitch and teeth count This product was added to our catalog on November 26, 2021

Read more less

YEA-MG-10013, Yeah Racing Hardened Steel Mod 1 Pinion Gear (5mm Bore) (23T) Yeah Racing Hardened Steel Mod 1 Pinion Gear. Made from HD steel for extreme durability and strength. These pinions use a 5mm bore and are laser etched with pitch and teeth count for easy identification.Features: Made from hardened steel Uses a 5mm bore Laser etched with pitch and teeth count Compatibility: Arrma Kraton 6S BLX Arrma Nero 6S BLX Arrma Notorious 6S BLX Arrma Typhon 6S BLX Kyosho DBX VE Kyosho MP9e Losi 8IGHT-E 1.0 Losi 8IGHT-E 2.0 Losi 8IGHT-T E 3.0 Mugen MBX8TE Team Associated RC8.2e Tekno RC EB48 Original Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Traxxas X-Maxx This product was added to our catalog on December 16, 2021

Read more less

YEA-MG-10014, Yeah Racing Hardened Steel Mod 1 Pinion Gear (5mm Bore) (24T) Yeah Racing Hardened Steel Mod 1 Pinion Gear. Made from HD steel for extreme durability and strength. These pinions use a 5mm bore and are laser etched with pitch and teeth count for easy identification. These pinions are available in multiple sizes. Please select the size you need from the list above. Features: Made from hardened steel Uses a 5mm bore Laser etched with pitch and teeth count This product was added to our catalog on December 16, 2021

Read more less

Yeah Racing Hardened Steel Mod 1 Pinion Gear (5mm Bore) Yeah Racing Hardened Steel Mod 1 Pinion Gear. Made from HD steel for extreme durability and strength. These pinions use a 5mm bore and are laser etched with pitch and teeth count for easy identification. Features: Made from hardened steel Uses a 5mm bore Laser etched with pitch and teeth count This product was added to our catalog on May 16, 2021

Read more less